Programming :: C Program To Check If Network Connection Available Or Not?
Jun 3, 2011I am writing a simple C program which has to find whether the system is connected to network/internet or not..
View 10 Replies
ADVERTISEMENT
Ubuntu :: Program To Check When Internet Connection Is Gone?
Jun 24, 2011My internet connection is really bad,so I need some kind of program to make a text file or something saying when internet connection is gone and time and date,also if possible to say why is it gone,is it my problem or is it my internet providers problem.
View 1 Replies View RelatedUbuntu Networking :: Check Which Program Is Using The Internet Connection?
Feb 11, 2010I'm using Ubuntu 9.10. My internet connection is an ADSL which I have set up using "pppoeconf". The connection starts at boot up. I can also start it if needed by using "sudo pon dsl-provider" and can stop it by using "poff dsl-provider".Recently I noticed that when I start my computer, there is some program (or programs) which is connecting automatically to the internet and downloading and uploading a lot of data. The data transferred can exceed 200 mb or 300 mb in an hour. I don't know what is being uploaded or downloaded.I know for sure that no file sharing programs like bittorrent clients are started at bootup so it is strange that this much data to be downloaded and uploaded without me sharing files or downloading files explicitly. The update software also does not run by default as I have opted to start it manually.
Is there any application which shows the programs that are connected to any particular port and transmitting and receiving data?In Windows XP I use a program called "What's Running" which clearly lists the programs using the different ports in the local machine and the remote IP addresses that the program is connected to. It also shows which program is transmitting and receiving data at any point in time. Is there any similar program for Linux?My internet connection is a data limited package otherwise I probably would not have bothered.
Programming :: Check The Presence Of USB Using /proc Interface In A C Program
Feb 22, 2010I want to check whether a USB is plugged in its slot from a C program. I want to make use of /proc interface for the same. During my reading i found that /proc/bus/usb/devices will tell how many USB devices are currently present.
So whether i can open this file and use stat call to identify whether the size is 0. If size is 0, i can assume no USB present. Else i can assume USB is present.
Whether my understanding correct. If USB inserted, how can i check the folders present in the USB stick.
Programming :: Make The Program Check If Either On Of The Input (either $Title Or $Author) Is Not Filled Up
Jan 11, 2010Title : Author : Price
France : Mark : 40
Persia : John : 50
how i arranged my database. I am trying to write aprogram which does a search either using Title, Author or both.
[Code]....
but i am still unclear on how i am able to make the program check if either on of the input(either $Title or $Author) is not filled up, and if one of it is not filled up, use the other one which is filled to do a search.
Ubuntu Networking :: Check The Network Connection Applet, It Display Active Information Of Eth0?
Jun 7, 2010I have a question regarding the configuration of Network Connection. My wired connection is fine right now and when I check the network connection applet, it display active information of eth0. However, when I click the Configure button, the Network Connection window appears but there's nothing in the Wired panel. Should there be a eth0 in that panel? I remember I had one before, but after I messed with some configuration of VPN, my network became unstable and I remove the Network Manager to try to solve the problem. Since then, there's nothing in my Network Connection window, though I can still connect to my router with eth0. Now even after I reinstalled the Network Manager, I still don't get anything.
View 7 Replies View RelatedUbuntu :: Program Startup After Network Connection?
Feb 28, 2010the startup of programs when i log into my Ubuntu Account.
My Operating System:
- Ubuntu 9.10 Karmic Koala (only using Gnome)
Programs at StartUp:
- Mozilla Thunderbird (2 email-accounts for business)
- Emesene (MSN Client for business use)
- FireStarter (I know it's just the GUI, but i love to view the Logging at realtime since Ubuntu is the Main-Server in my network)
Is it possible to configure the startup, so that the programs start running AFTER the Network Connection is established?
Ubuntu Networking :: Run A Program When Network Connection Is Established
Jan 5, 2010I want a program (shell script) to be executed as soon as my DHCP connection is established successfully. Is there any way I can do this ?
View 2 Replies View RelatedProgramming :: Connection Refused In Client Server Program
Oct 23, 2010I wrote a simple client server socket program in C.
View 1 Replies View RelatedOpenSUSE Network :: Mobile Internet Connection - Program Doesn't Find The HUAWEI USB Stick
Aug 11, 2010I have opensuse 11.1 Gnome on Lenovo S10e. I'm wanting to establish a mobile internet connection. I have tried so far...*UMTSMON but when I click on it nothing happens. I have reinstalled the program several times to no avail. *WINE to run the Optus program, however the program doesn't find the HUAWEI USB stick & *Via a Bluetooth connection (use mobile phone as a modem) didn't work either Anyhow, I have tried these and some other ways to get mobile to no avail.
Also, have gone to network connections-mobile broadband-add-configure it- but what am I forgetting to do? Need a path I can take to get mobile internet working. (I even have a direct SIM card slot in this laptop
Fedora :: Can't Use Konqueror Same "check Network Connection"?
Jun 24, 2011I recently got a Uverse internet connection and ever since I have had issues, I assume it is because of the Uverse IPV6 as firefox needs to disable ipv6 to work, but I am having issues with the rpmfusion repos I'm getting a message "couldn't resolve host" does yum use ipv6? Also I can't use konqueror same issue "check your network connection". Anyone else have Uverse and are there any specific setting I need to get it to work?
View 4 Replies View RelatedProgramming :: Link Network Driver And Application Program?
Dec 23, 2008I had return a driver for receiving and transmitting packets for the ethernet controller named rtl8139.I want to test it by writing an application program (socket programming).But I am unable to link it with the interface. Can anyone help in this regard?
View 1 Replies View RelatedUbuntu Servers :: Machine Shadowing Crashes With Message "The Connection With Remote Server Was Shut Down, Please Check Your Network Settings And Try Again."
Sep 5, 2010I am using debian testing on my office pc, but i need to access it's desktop from time to time. So i need No machine/teamviewer software that can provide me with possibility to interact my desktop. The problem is, that i want to run shadowed session type, because teamviewer is not good for me. So, when i run no machine in shadowed mode, it crashes with message "The connection with remote server was shut down, please check your network settings and try again." The log is here:
[Code]....
Programming :: Check Menu & Check List In Utility Dialog?
Aug 19, 2010I want to put check menu & check list in utility dialog.i dont know how i do this
View 1 Replies View RelatedUbuntu :: Setup Citrix ICA Client 9 On 9.04 Server - Error In Network Connection Network Or Dialup Connection May Be Preventing
May 14, 2010I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedUbuntu Networking :: SSH Over One Network Connection And Out To Internet On Another Network Connection
Jul 9, 2010I need to setup an Ubuntu Server to handle backups over the network (probably rsync over ssh). That server will then transfer the backup data offsite over a secondary external data line.How can I configure the ethernet interfaces to handle such a scenario?
View 1 Replies View RelatedNetworking :: How To Check What Program Is Using Port
Sep 6, 2010I want to check what program is using some ports. I have
Code:
netstat -a | grep localhost
tcp 0 0 localhost:58935 localhost:www ESTABLISHED
tcp6 355 0 localhost:www localhost:58935 ESTABLISHED
udp 0 0 localhost:53888 localhost:53888 ESTABLISHED
I try ps aux | grep 53888. What other command can I use?
Server :: Program To Check Cpu Load?
Jul 28, 2011my server get hanged when ever their is loading problem. i wanna a program to get cpu load and also when load get high from a specified load value it should restart service. is their is any programm or how to write that programm..
View 12 Replies View RelatedProgramming :: Program A SH - Bash Program With Zenity To Play Radio Based On A Site?
Feb 15, 2011I will have to code this. However I am lacking of time since I have too much to do. make a short code bash/dash to prompt the country with Zenity, then, get the PLS or m3u url and prompt with another zenity which radio to play. http://www.listenlive.eu/index.html
My code to get url's radio country.htm is:
Code:
Ubuntu :: Run Program To Check Programs Dependencies
May 18, 2011I'm not talking about like:
apt-get check
I mean it's like, and I thought it was this:
valgrind <application>
Needs:
x
y
z
Does anyone know what I'm talking about? A lot of programs I'm getting segmentation faults like Rhythmbox, a few games, etc. so I dunno.
EDIT: gdb kind of works, but doesn't show me what another program would..
General :: Check Version Of Program Using Command Lines?
Jan 20, 2010How to check the version of a program, in particular geant4, in linux using the command lines?
View 4 Replies View RelatedUbuntu :: How To Check Ftp Connection
May 4, 2010I have a Ubuntu box with a ftp service on. I wanto to upload/download files from my Win XP connected via LAN. I tried ftp command from cmd but I received "Error 530. Login incorrect. Login failed".I'm using root, I am 100% sure about the password (I managed to connect via putty), I just wonder how I can check the ftp connection from xp to ubuntu... maybe a firewall is blocking the port 21?I also tried ftp command in ubuntu (when I was connected with putty) and I got "connection refused" error.
View 3 Replies View RelatedFedora :: Program To Recursively Check A Web Site For Broken Links?
Sep 21, 2010Is there a program, or command, that will allow me to recursively check a web site for broken links?
View 2 Replies View RelatedGeneral :: Gotten An Error Message To Please Check That The Dcopserver Program Is Running?
Oct 31, 2010I have gotten an error message to please check that the dcopserver program is running.Where do I look to see if it is running?
View 3 Replies View RelatedGeneral :: Inbound Connection Check
Jun 1, 2010How to check inbound and files transfer from outbound to inbound in my linux server. because in my server from outside to inside transfer is high. so its take huge bandwidth. how to check this and reduse this .
View 2 Replies View RelatedProgramming :: Open Or Run A File/program Through A C++ Program
Jan 15, 2010Ok so Basically i have 2 questions
1. i know how to create a file with c++ using but is there a way to save it to a specific location on your computer with windows and linux
Code:
2. i need to know how to run/execute/open a file in a c++ program im using and its not working
Code:
Debian Installation :: How To Check Internet Connection From CLI
Oct 29, 2014freshly installed Debian-netinst, configured internet connection. Pinged Google - all transmitted packets were received, 0% loss.
Yet I am not sure if I have internet connection for what ever package I am trying to install using apt-get install package_name, I receive
E: Unable to locate package package_name
How can I check internet connection from CLI?
Ubuntu :: How To Check If Internet Connection Monitored
Oct 24, 2010In Ubuntu, How can you tell if your connection is being monitored? Have a home system, me and girlfriend are only users. Lately ALLl websites are taking longer to download. She claims her system and bank accounts were compromised. So am wondering if the connection is being monitored. Lots of tools for "windows" to help determine, but what about linux / ubuntu?
View 7 Replies View RelatedServer :: Create A Script For ISP Connection Check?
Jan 14, 2011I would like to make a script which can check my ISP connection, I have a dynamic IP and it seems that lately it often gets changed.
So I thought of making a script which does a NSlookup and send this to my root address. But it would be better if it only does this when it notice a disconnect otherwise I get loads of messages. I use a watchguard firewall and behind this I have my Ubuntu server which is also the DNS and DHCP server for my internal LAN. My watchguard makes a DSL connection with my bridged DSL modem. Also the watchguard has a logging system and I send the syslog to my ubuntu server but it's too much work to look everyday into this whole logfile system.Or would it be better to look into this logging files and search for a specific description and send only this to my root mail?
CentOS 5 Networking :: Possible To Check Current Connection?
Sep 14, 2010I have a email(postfix) installed on my centos, i think it is under some kind of attack, Is it possible that I can check who is connecting my server?
View 1 Replies View Related