I have updated my system from 10.3 to 11.2.Now I cannot run scanimage because of missing lib.rpm -qf /usr/bin/scanimage sane-backends-1.0.20-8.3.i586
ldd /usr/bin/scanimage
linux-gate.so.1 => (0xffffe000)
libsane.so.1 => /usr/local/lib/libsane.so.1 (0xb77f6000)
[code]....
I posted in the Ubuntu forum regarding a problem with an HP Scanjet G4010 scanner, but now I have a specific question. The scanner is reported with lsusb and recognized by sane-find-scanner, but scanimage -L does not find the scanner. My question is: What would be the cause of the scanner being reported in lsusb and sane-find-scanner but not recognized by scanimage -L?
View 8 Replies View RelatedI got a new Canon LiDE 110 scanner. It's a very cheap device but the important thing is that it is listed as "completely supported" in the SANE site. I had to compile the latest SANE from sources, but I have no problems with compiling from sources, and now everything runs from the version in /usr/local/... The problem is that "scanimage -L" doesn't detect the scanner. I also don't see any scanners under /dev/... I think it might help if I pass the scanner device with the -d option to scanimage but I don't know how to find out what the device file of it is.
This is what I see with lsusb:
Bus 005 Device 004: ID 1c4f:0003 SiGma Micro
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 007: ID 04a9:1909 Canon, Inc.
Bus 001 Device 003: ID 046d:080f Logitech, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
The scanner is on Bus 001 Device 007.
scanimage is cool. It would be great if there was a command line that one can configure to scan without X, and with rather quite some options to configure... convert to jpgcapable of finding -d snap:lib... whatever you plug and replug the scanner
View 12 Replies View RelatedI am trying to use sane to acces a scanner. The system is Debian Squeeze AMD64 architechture.The scanner is Brother DCP-J715W, over a network connection. I have installed the drivers from Brother, succesfully.
I can find the scanner with:
$ scanimage -L
device `brother3:net1;dev0' is a Brother DCP-J715W Brother
[code]....
I found someone who has a CanoScan 9000F (the new Canon flatbed scanner replacing the 8800F which is already supported in SANE 1.0.21), and managed to find out that it also uses the PIXMA protocol (the protocol used in the scanners for Canon's multi-function printer/copier/scanner devices of the PIXUS/PIXMA MP series (and other names depending on sales region).
Support for the scanner has therefore been added in the pixma backend. However, the initial tester is having trouble compiling and configuring SANE from source, so I am hoping there will be some people here who have access to this scanner and can try to help out as well.
After compiling SANE, if "scanimage -L" does not detect the scanner, probably "usb 0x04a9 0x1908" needs to be added to /etc/sane.d/pixma.conf and /usr/local/etc/sane.d/pixma.conf.
After that slow steps need to be taken to get support for the various resolutions, as this scanner as double the number of CCD rows as the 8800F, and can do double the resolution (up to 9600dpi) optically.
on a newly installed opensuse 11.4 x86_64 I am unable to find the settings to switch keyboard layout from english to german to french or any other language .it used to be in the system settings Keyboard-->Keyboard layouts -->> activate german btw french etc...
View 2 Replies View RelatedI recently created a SUSE Linux Enterprise 11 SP1 VM at susestudio. I am a total SUSE novice...I seem to be missing several commands from the command line... in particular I do not have the ability to run man.If I try to man anything I getbash: man: command not foundI checked, and the man-pages package was not installed, so I did download and install, (and rebooted) but still no luck running man
View 6 Replies View RelatedI work on opensuse 11.2 on my core 2 quad. Although I have 8GiB ram, in the system monitor I see 3.5GiB. I really need 8GiB ram, why a part of the ram is missing?
View 4 Replies View RelatedAfter upgrading to the above, I find that some plasmoids are missing: RSS Now, Dictionary, Calculator (of the ones I use). The most important one for me is RSS Now, indeed there is no RSS plasmoid at all offered anymore. Downloading new plasmoids doesn't offer anything, and I can't find it on kde-looks either. Has anyone else noticed this, and how I can get RSS Now and the other back?
View 7 Replies View RelatedWhat is the best way to install GMP onto my OpenSuSE 11.4_64 box? I see gmp-devel is listed in the repo for download, but I need binary gmp. I'm guessing I'll have to use something like SuSE build service or compile from source.
View 3 Replies View RelatedI have installed Tomcat6 succesfully from Yast. Now im wondering where is catalina.sh file located ?
Tomcat is running fine, but i'm needing that startup script for deploying web service directly from Netbeans IDE.
The default init script is found from /etc/init.d/tomcat6, so is catalina.sh included to this installation ?
I'm using Opensuse 11.2
I installed openSUSE a couple of weeks ago but didn't use it until 2 days ago. It was the latest version when I installed it.To my surprise there wasn't a gcc or pppoe installed. Or at least there wasn't a command line begging with ppp.I tried to install them both with rpms. I think I got them both, just they don't work very well. In particular rp-pppoe doesn't work at all. It says that there's no modem on eth0, which is very true there's only a eth cable. gcc seems to work but I'm not sure I installed all the dependencies.I can't use yast because of lack of internet. I have to reboot to windows and download rpms.Can you give me a work around? At least for the pppoe then it might fix itself. Can I have some EXACT links to rpms or another solution?
View 4 Replies View RelatedI have openSuse 11.2 with KDE 4.3.1 desktop. I accidentally closed my taskbar and now I can't get it to reappear. I already tried to run kicker (Alt + F2), but that didn't work.
View 4 Replies View RelatedLooks like somewhere down the line the pmda's for pcp fell out of the distro? The pmcd config (in /var/lib/pcp/config/pmcd/pmcd.conf) shows that pmcd expects 2 pmda's.
bypass:/var/lib/mooty # cat /var/lib/pcp/config/pmcd/pmcd.conf
# Performance Metrics Domain Specifications
#
# This file is automatically generated during the build
# Name Id IPC IPC Params File/Cmd
pmcd 2 dso pmcd_init /var/lib/pcp/pmdas/pmcd/pmda_pmcd.so
linux 60 dso linux_init /var/lib/pcp/pmdas/linux/pmda_linux.so
Yet the whole /var/lib/pcp/pmdas directory is missing.
I run a molecular biology lab and we like to run the "Molecule" GL screensaver in order to look cool (I know it doesn't actually save screens, and it wastes energy, but you know..). I'm about to install Opensuse 11.3 on all 24 of our laptops and I find that the number of GL screensavers installed as standard is greatly reduced from previous Opensuse releases. Any idea where I can get the "Molecule" and other screensavers?
I am running KDE and have the following relevant packages installed:
kdeartwork4-screensaver
xscreensaver
xscreensaver-data
xscreensaver-data-extra
gnome-screensaver
gnome-screensaver-extra
This apparently gives me just 8 GL screensavers - there used to be a great many more?
A couple of weeks ago I installed openSUSE 11.3/KDE 4.4.4 over openSUSE 11.0/KDE 3.5. It went well except for what turned out to be a glitch with the KDE default Plasma Desktop Workspace, which prevented the system from shutting down (the screen would go blank and then nothing would happen). Changing the Activity in the Desktop Settings to Folder View got rid of the glitch, returning everything to normal.
The printer icon/widget is now a question mark "?." I can't say for certain when this happened.Clicking on the widget produces the message, "KDEint could not launch 'opt/kde3/bin/startprint'."The command for the widget is 'opt/kde3/bin/startprint %U'.The file opt/kde3/bin/startprint no longer exists.What additional information, if any, might be needed, and what can be done to get this widget working again?
On openSUSE 11.3 I was using remmina as a replacement for tsclient. After upgrading to openSUSE 11.4 (Did a complete new install) Remmina only seems to support SSH connections. All other protocols like RDP, NX and VNC are missing. I got FreeRDP and rdesktop etc. Installed and can connect to RDP sessions from the terminal.
View 3 Replies View RelatedI've just updated my system from SuSE 11.2 to 11.4 (I'm using KDE desktop environment) I like to install SeaMonkey myself. I use the installer from the Mozilla site. When I try to run SeaMonkey, this is what happens:
Code:
./seamonkey-bin: error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory
Where do I get the missing library? I've tried searching for it on the rpmpbone site RPM Search and even they couldn't find it.
I have not used OpenSUSE for some time, but I am running 11.4 32 bit on my laptop now. The system runs fine and stable, but I am surprised to find icons missing for a few applications. They've never been there, like if they are missing from the rpm they are installed from.
View 5 Replies View RelatedI just installed openSUSE for the first time. I customized the installation by removing unwanted software during setup, but unfortunately I must have removed something needed because when I open the main menu using the button in the bottom left corner there is the search bar missing. Which software package do I need to install to get it back?
Edit: I am using Gnome btw
I just updated Java and when I checked in my plugins for SeaMonkey, Java is not listed, not even IcedTea. When I looked at FireFox's plugins, the only Java listed was IcedTea.
How can I get SeaMonkey to know that Java is installed? I looked for the 32 bit Java from within YaST but saw none, just the 64 bit.
Anyway, these are the java's installed:
I'm running SuSE 11.4 and my browser of choice is SeaMonkey 2.0.14.
This is a list of my ~/.mozilla/plugins folder:
Code:
i'm searcing for libmysqlclient_r.a 64bit in openSuSE 11.2. On 10.2 it was included in libmysqlclient-devel, but now missing? Is there a package for that?
View 6 Replies View RelatedI have an acer travelmate 632 running 11.3.The grandkids have been playing playing frozen bubble in fullscreen mode but the "full screen" was actually only the central part of the monitor.Yesterday, there were a bunch of updates. Today, the kids again played frozen bubble but this time, the "full screen" was really the full screen, not the sub-window. After exiting the game, a window popped up telling me that a monitor had been disconnected and would I like to reconfigure. I said yes.
After reboot, the graphical login failed saying that a serious error had been encountered and that I should consult the KDM logs. I went to console mode but was unable to log in. Neither as root or as the regular user. Both fail with "Login incorrect". In fact, the only way in now is via single-user mode.
Looking through the /var/log/messages, I see a curious set of mesages complaining the, for instance, "/dev/sda4 is not in PARTITIONS" note the upper-case. I then see that, despite what "mount" tells me, ?home (sda4) and /boot (sda1) are not mounted. That is, I cannot list their contents. If I manually mount those partitions, I can list their contents.
new installation of 11.2 when I try to follow the instructions in this thread
Code:
http://forums.opensuse.org/new-user-how-faq-read-only/407184-multi-media-restricted-format-installation-guide.html
I get messages saying packages are missing from packman I have the repo enabled it seems to complain a lot about libxine1, here's one of the error messages
Code:
Retrieving package libxine1-1.1.16.3-1.pm.25.1.x86_64 (1/19), 2.3 MiB (5.8 MiB unpacked) Retrieving: libxine1-1.1.16.3-1.pm.25.1.x86_64.rpm [error] File './x86_64/libxine1-1.1.16.3-1.pm.25.1.x86_64.rpm' not found on medium 'http://packman.jacobs-university.de/suse/11.2/
I have installed codecs but I still can't write audio cd's out of my mp3's. When I start k3b it warns about missing MAD, but after searching for MAD I could only install libmad0 and there is no luck with that. In suse community site it says something about installing from packman. But this only adds kde3-k3b and I dont want that. Is there anything I can do to use mp3 with my kde4-k3b?
View 9 Replies View RelatedI have a problem with playing DVD. I have followed instructions given in Check your multimedia problem in ten steps but I'm still experiencing problems with some DVDs. Output of commands suggested in above post are listed at the end of this post. On thing I noticed was that for below packages I had to choose an older version from openSUSE repo because of the installed version of gstreamer*plugins*base.
View 3 Replies View RelatedTo be able to convert MP3<>audio in K3B, i need MAD-MP3-Codec. This codec doesnt exist for OpenSUSE latest version of K3B.
View 4 Replies View RelatedI must be slacking not knowing what is going on here. But does anyone know why VLC was pulled form packman 11.4?
View 9 Replies View RelatedI work on opensuse 11.2 32 bit on my core 2 quad. Although I have 8GiB ram, in the system monitor I see 3.5GiB!!!! I really need 8GiB ram, please let me know why a part of the ram is missing?
View 3 Replies View Related