OpenSUSE :: Unable To Change The Resolution
Feb 13, 2010
I was running my Acer V193 monitor at 1280x1024 resolution on KDE 4.3.1. Then after someone else used the computer the resolution changed to 1024x768 and I am unable to change it. Yast recognizes the monitor correctly, but when I run Sax2 it will not change it back to 1280x1024. It accepts that setting but when I start it again it is set at 1024x768. My xorg.conf indicates...
Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 376 301
[code].....
View 3 Replies
ADVERTISEMENT
Sep 4, 2011
I just upgraded to 11.4 and after finding the right nvidia driver it finally works.But i can`t change my screen resolution to 1280x1040, right now it`s on 1024x786Software management says sax2 is installed but when i type it in a console i get the message"If 'sax2' is not a typo you can use command-not-found to lookup the package that contains it, like this:cnf sax2" Also in yast i can`t find a option to change the resolution of my monitor.
View 9 Replies
View Related
May 1, 2010
I have been using Ubuntu for a couple of years and always at the 1024 768 screen resolution.
I just finished installing version 10.04. It defaulted to 1280 1024.
I much prefer the 1024 768 because it is better for my older eyes, but when I attempt to change, the screen goes black for a minute and then stays at 1280 1024.
Since earlier versions of Ubuntu did it, this should also, but..
View 5 Replies
View Related
Sep 17, 2010
Just Installed the latest version of Ubuntu Netbook on my Toshiba Portege 7200 and the screen resolution is set to 800x600. The OS is not recognizing the fact the laptop can do 1024x768. I've been searching the net for a few hours to fix the problem and I'm not getting anywhere. The fix to the problem is to add the info below to the Xorg.conf file. This file does not seem to exsist on the latest version and if I create it manually it does not work.
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package.
# Note that some configuration settings that could be done previously in this file, now are automatically configured by the server and settings. Here are ignored. If you have edited this file but would like it to be automatically updated again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Trident Microsystems Cyber 9540 (rev 52)"
Driver "trident"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Integtrated LCD"
HorizSync 28-90
VertRefresh 43-85
#Modeline "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
#Option "PreferredMode" "1024x768_60.00"
EndSection
Section "Monitor"
Identifier "VGA-0"
Option "Ignore" "true"
EndSection
Section "Screen"
Identifier "Screen 1"
Monitor "Integtrated LCD"
Device "Trident Microsystems Cyber 9540 (rev 52)"
EndSection
View 5 Replies
View Related
Mar 8, 2010
I am unable to change mu screen resolution in slackware 12.2. I am editing the xorg.conf in "etc/X11/" with nano. My graphics card is a ATI with 64MB RAM. My monitor is capable of 1280x1024 @ 60Hz. Heres the xorg.conf:
Code:
# File generated by xf86config.
# Copyright (c) 1999 by The XFree86 Project, Inc.
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions: .....
View 2 Replies
View Related
Feb 19, 2011
I installed fedora 14 on Dell laptop but I am unable to change resolution on my laptop also video quality is poor , I think proper drivers are not installed. I am new to Fedora, so probably missing something.
[root@localhost qalandar]# lspci -nnk | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02)
View 8 Replies
View Related
Dec 25, 2010
Need a driver for a Compaq P900 Trinitron monitor, Model PE1030 using Linux Mint 8 Helena. Unable to change resolution. Max is 600 x 400.
View 6 Replies
View Related
Feb 24, 2011
installation opensuse 11.3 and kde 4.4 after update to kde 4.6, work fine, but problem is login screen is low like 640x350...? i wanted to change from lowtion to high 1024x768?when i start opensuse and begin to login was low resolution and log in my user and it's low resolutiona dn i change screen from setting system (kde) after change high display is works fine and rebbot same low resolution for LOGIN MANAGER how i can change it??
View 1 Replies
View Related
Jan 14, 2011
I have given up on trying to change the resolution on my old server with 11.3 installed because there is no easy way in 11.3 to change to 1024 x 768 x 64K colours to accomodate the inadequate memory of the on board display adaptor so I have reinstalled 11.2 which had gui for controlling display resolution.
I must keep my /home partition intact and therein, I suspect lies the problem because in the /home directory there are both .kde and .kde4 directories. Although immediately after installation of 11.2 (network install) kde 3.5 was running, after all the updates had run I ended up with kde 4.3.5 and therefore the same problem of not being able easily to change screen resolution. Is it possible to revert to earlier kde and how should I do this please? Another option I have still to try is to install a display adaptor card. The machine bios is supposed to turn off the integrated display controller if it detects one in a slot, but how do I get my operating system to find and install drivers for the new card?
View 4 Replies
View Related
Mar 2, 2010
I installed Suse 11.2 recently, and i have my laptop hooked up to a HD monitor.
When i choose the HD monitor, if the resolution is low, lets say 1280x800, same as my laptop, its fine. I see the mouse pointer.
But as soon as i change the resolution to 1920x1080, the pointer disappears. Mouse functionality works allright. Right click/left click works fine, and i can see the buttons getting highlighted on mouse-ever.
But the pointer is gone.
View 4 Replies
View Related
Feb 10, 2010
1. The resolution change (from 1024*768 to 1680*1050)could not be saved to /etc/X11/xorg.conf2. After I manually changed the /etc/X11/xorg.conf, it could not take effect when I restart my suse. On restarting, it firstly 1680*1050, then jump back to 1024*768.How I resolved it: 1. When click "Save to X configuration", save the xorg.conf to user directory, then manually copy it to /etc/X11/xorg.conf using root privilege. (sudo cp ...) 2. change the resolution to 1680*1050 in nvdia-settings, then click "apply", after it takes effect, go to "control center" - "display", you will find the resolution here has been changed to 1680*1050, then press apply, restart suse, you get 1680*1050.Some details:(1) I have a nvdia GeForce 6150SE on board video card, and suse11.2(2) I installed nvdia driver through NVIDIA drivers - openSUSE
View 4 Replies
View Related
Feb 20, 2010
Is there a way to change my resolution to something specific? I was trying to make my display "less-widescreen" when I accidently made it completely changed.
From the sax2 command, there is only 1400*1050 and 1600*1200, both that are not what I'm looking for and messes up my display. Now, I can't change it back to the original, much less the one I'm looking for (1600*900).
View 9 Replies
View Related
Jul 21, 2010
I upgraded my opensuse from 11.2 to 11.3, but after it, I have several problem with it.
Firstly: My graphic card is intel hd4500 and motherboard chip's is intel G41. After upgrading, I understood suse 11.3 didn't have sax2. at a result. I have problem with graphic card driver and consequently can't change screen resolution, therefore after each restart, my resolution automatically fix to 1600x1200 but I would like to set it in 1280x1024? What can I do to change it permanently?
Secondly: I installed vmware workstation 6.5 and after it, I see a message that say vmware need to Kernel Header 2.6.34-12- desktop. I install kernel-syms, kernel-source, gcc and make but doesn't run yet. What happen for it?
View 9 Replies
View Related
Nov 10, 2010
I am trying to change the default screen resolution in Run Level 3 to 640x480. I have tried changing the menu.1st file and the vga=0x301 mode sticks until the system begins to boot and then resets to a higher resolution. This system does not have X, or Sax2 so no go on those options. This is OpenSuse 11.3 x64.
View 6 Replies
View Related
Oct 14, 2010
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies
View Related
Feb 25, 2010
I can't change the resolution beyond 1024x768 on my Dell Latitude D600 running 11.2. It's got a Radeon Mobility 9000. The only fixes I've seen involve the Intel 915 chipset not this one. I've changed it in sax but even though it says it should be 1400x1050 it remains at 1024x768.
View 3 Replies
View Related
Jun 7, 2011
I am running Windows 7 inside Virtual Machine Manager - running on Cent OS 5.6. My problem is that the Windows 7 'Window', is only about half the size of the screen. Is there any to change the resolution of the OS running inside Virtual Machine Manager?
View 6 Replies
View Related
Jul 11, 2011
I just completed a clean install of 11.4 -- using KDE 4.6. It's absolutely a love-hate relationship so far after upgrading from 11.1 and KDE 3.5.With 11.1 it was incredibly easy to change my icons whether they were on the desktop, or in a Konqueror folder, or on the bar at the bottom of the screen. I simply right clicked on the icon, up would pop a configuration screen, I browsed to where the icons were stored, selected one, clicked "apply" and it was done.
But not in 11.4... For the icons I've dragged onto the bottom bar (e.g., YaST, Personal Settings, Dolphin, GIMP) if I right click on any of them and then click "icon settings" I get a screen where I should be able to see and change the icon, but instead I see a grayed-out gear, and all of them seem to be controlled by root. Under 11.1 and KDE 3.5 I could change these icons, but not with 11.4.
Another example... Under System Settings>File Association>inode>directory. Here you see a plain blue folder icon.Upon left clicking that icon I can then browse to my icons, choose one, click it, and then "apply," and the icon **does** change here in the "inode/directory" screen. But the change does **not** carry over to anywhere else. Under KDE 3.5 and 11.1 it would change every folder everywhere in my home directory. I would do the same thing in "file associations" with some applications (e.g. Word, Powerpoint, and Excel which I run with Crossover Office), and by changing the icon under "file associations" it would change every similar document in my home directory. But not in 11.4. In the first case with icons on my desktop I am unable to change them (seemingly locked to root).In the second case with icons I see in "file associations" I can change them in that screen, but the changes do not then apply globally.
View 8 Replies
View Related
Mar 24, 2010
I'm new here as I'm new to openSUSE. Having used Mandriva 2006 for years, I've gotten used to KDE3, and I'm still using it. I've got a few problems right now, but one of the most annoying is this: I changed my Yakuake skin (I can't remember the name of the skin), and Yakuake became really slow. It can take even ten seconds for it to scroll down, which to me is a bit too much. The thing is, I can't change the skin back. Here's what I tried to do:
1. Look for the right file and set the skin from there. (Didn't work)
2. Delete the skin file. (Nope.)
3. Reinstall yakuake. (Nope, same skin.)
Now okay kde4-yakuake is an option. However I feel like this is something I should be able to solve. My attempts this far have been a bit foolish, but usually something works.
Here's a screenshot: [URL]..
View 2 Replies
View Related
Apr 10, 2011
I've a little trouble: I reinstalled on my notebook OpenSUSE 11.3 yesterday and I'm unable to change the hostname. I modified it, but when I type on terminal
Code:
uname -a
it doesn't give the right answer but returns
Code:
host
I don't know where I wrong because I did this action many times with Opensuse 11.1 and 11.3 without any problem.
View 9 Replies
View Related
May 20, 2010
Command '/usr/bin/kcmshell4 kdm --lang en_US' not found
View 9 Replies
View Related
Jun 14, 2010
I've been using Thunderbird (2.0.0.24) with html attachments opening in Firefox.I just installed the new Chrome browser (5.0.375.70) and like it very much, enough so that I decided to switch from Firefox now that the Add-Ons I like are available for Chrome (Lastpass, Adblock, AutoPager). I've made Chrome the default browser in KDE's "Configure Desktop>Default Applications", but html attachments in Thunderbird still open in Firefox.I've tried most of the fixes offered on this and other forums as well as those offered by Mozilla's various help files, but nothing works. Most suggestions refer to fixes for 1.x versions of Thunderbird and no longer can be used.I just checked another OpenSUSE 11.2 PC with the newer 3.04 version of T'bird and saw no solution there either.
View 2 Replies
View Related
Mar 22, 2011
I have just recently found I have a problem under SUSE 10.3. History, I had my PC, an IBM Power Centre box with 4g ram and 2 hard-drives (80gb and 1Tb) fail to reboot after a power drop. Got an error message about the 80gb H/D losing some information. I was able tofix the issues by using "fsck". The PC was able to restart after this, and seemed to be working well.
However in the last couple of days I noiticed that the time was incorrect, it seems the sync for time has switched to normal time too early. Right mouse click to adjust this would not bring up the "adjust time" window. ?Why, unknown. I then decided I would go through "YAST" to do my changes, but now I am unable to load "YAST". I can load it through a terminal window, but there must be some reason why it won't load the GUI? from the menu.? There could be other programs that are also not loading that I have not found.
Q- could something have been lost when I had the H/D reboot issue? And if so is there any way of restoring lost or coruputed OS files?
I have the 10.3 OS on DVD, which is how I installed it, and note that there is a recovey prompt, but need some advise on how to go about it. A total reinstall is not an option at this time until I can get a backup unit running.
View 7 Replies
View Related
Sep 4, 2010
I'm having the following problem with SUSE 11.3 and my Nvidia Geoforce 7300 GT. I have the driver installed but am unable to change the resolution in the Nvidia configuration X-Server. It seems it is limited to the following 640x480 and 320x200. fix this as it looks awful and I know that I should have greater resolutions.
Please find my xorg.conf listed below
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder97.nvidia.com) Fri Aug 27 20:55:22 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
[Code]...
View 9 Replies
View Related
Apr 22, 2011
After I upgraded from KDE 4.5 to KDE 4.6 I ran into a problem with changing the the status of different repoes from enabled to disabled, and vice versa. As I only did a desktop upgrade it is perhaps just a coincidence and hence the problem may be related to something different. But in any case, if I tick or untick the 'enable' or 'disable' option within the Yast module Software Repositories for the repo I wish to activate or deactivate, nothing happens. Deleting and readding the repoes has no effect, neither has rebuilding the rpm db or zypper refresh. I'm not very familiar with the command-line for these operations so I am grateful if anyone could give me a hint on what to try next.
View 6 Replies
View Related
Mar 21, 2011
Fresh install of 32-bit 11.3 on my father's computer.He needs me to enlarge the mouse pointer and/or make it a different color. I changed it in the settings/themes thing like you are supposed to, but it appears to only take effect in Mozilla.needs the larger mouse pointer for the entire system. Evolution appears to completely ignore the mouse theme settings.
View 1 Replies
View Related
Sep 14, 2010
I want to change the image that is presented to the user when i choose operating system on startup eg back.jpg i have looked at tutorials and no luck
i am running gnome on 11.3.
View 7 Replies
View Related
Mar 21, 2010
Ok, I'm sick of Grub2. It's a total mess that is needlessly complicated in the worst fashion imaginable. (Yes, I've read https://help.ubuntu.com/community/Grub2, it doesn't help.) I can't understand Grub2 developers thinking (maybe they're aliens?) and, quite frankly, I just don't care anymore. how to change resolution for textmode terminals (tty1, tty2, ...)? I don't want to read any more [censored] about gfxpayload and how it's supposed to work. Please don't respond if you can't provide an example config that simply just works.
[Edit/SOLVED]: No longer an issue in Lucid Lynx for me. See this HOWTO. Note that 1280x1024 isn't the only option. You can use any resolution supported by VBE of your video card. Use vbeinfo command in Grub shell to see the list of available display modes.
View 3 Replies
View Related
Jul 27, 2010
when i try to change my resolution in 10.04 i get a msg saying"it appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?"
View 5 Replies
View Related
Oct 1, 2010
I have just installed Ubuntu 10.04 server on VM. Installation went well and now im trying to change the console resolution. I have changed the grub.cfg file and added the "vga=791", but after rebooting I get a black window (on the vm), nothing written nothing is happening.
View 4 Replies
View Related
