Using Ubuntu 11 64 bit. I tried to install a netgear driver, it didn't work so I deleted it, now every time I try to run Wireless Network Drivers the program hangs and I can't do anything with it. I have to force quit. I have removed and installed it a few times now to no avail.
View 1 RepliesI recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
I installed the b43 drivers to enable the monitor mode for using kismet. but after installing, it shows "Device not Ready".
The dmesg | grep b43 output shows:
[ 86.449430] b43 ssb0:0: firmware: requesting b43/ucode15.fw
[ 146.449335] b43 ssb0:0: firmware: requesting b43-open/ucode15.fw
[ 206.448146] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[ 206.448153] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[ 206.448158] b43-phy0 ERROR: You must go to [URL] and download the correct firmware for this driver version. Please carefully read all instructions on this website. How to re-enable my wireless connection.
How I can open files through wireless network .
View 1 Replies View RelatedUsing my laptop, I'm trying to get onto the local library's wireless network, with zero results so far.Basically, I can see the network, but when NetworkManager tries to connect it just spins for a few minutes and then rejects the connection. (Or the connection is rejected by the router) My wireless connection works fine when connecting to my WPA home network.
View 4 Replies View RelatedI've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies View RelatedI have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies View RelatedI'm having problems beyond my knowledge with a Toshiba Satellite C655D-S5133. The system hard hangs at various time **Unless** it is connected to an Ethernet connection. In particular, it always hard hangs when either:
1. It associates with a wireless Access Point
2. I attempt to execute:
sudo modprobe -r atl1e (hard hang *before even asking for password* -- Not on module removal) Other hangs are frequent, and seemingly random activities cause them, but they are bad enough that the system is unusable even when used off-line. With a wired Ethernet connected the system is stable, and I don't think it has ever crashed. Even if that Ethernet connection is not up, or has no IP addr. As long as I am connected to Wired Ethernet, Wireless works fine. I can associate/disconnect from AP's all day long.
[Code]....
I've been trying to get online for the better part of a week now with no luck. I can't get my network up to download drivers for my hardware - without the drivers I have no GUI so I'm stuck trying to do this in text mode.
View 14 Replies View RelatedI'm running Ubuntu 10.04 Server x86 64-bit and installed likewise-open, which I think is version 5.4. I can authenticate with Active Directory credentials, but it seems to hang when I log in. I can press Ctrl-C and break out of the hang, but was interested to see what was causing the behavior. I noticed lsassd was taking up about 99% of CPU while in this hung state. I then did a
Code:
tail -f /var/log/syslog and discovered lsassd was doing some type of query for what appeared to by every user in our Active Directory as I saw hundreds of entries like this being added to the syslog:
Code:
May 25 14:21:27 coe-web lsassd[1225]: 0x7f5bc72c1710:The user attributes in the cache data for 'domainjohndoe' are invalid. The cache database or user data in Active Directory could be corrupt.
Is there some setting I can change so it doesn't do this?
i installed ubuntu along side of xp, and i cannot get my wireless to work. the drivers that are installed in xp work great, and i can access the internet, but do not work in ubuntu.
View 3 Replies View RelatedI have Fedora11 running in my machine and it has no LAN port (RJ-45). I have a wireless PCMCIA card.The model of the wireless card is NL-2511CD EXT2(ETSI).When I insert that card to the PCMCIA slot a window pops up and ask for a WEP key. My wireless router is configured with WPA but above pop-up has no WPA option. I suspect my fedora installation does not have the necessary driver for my wireless card.I want to install that driver. I can transfer that file to the machine via thumb drive since it has no network connection yet. How do I install this? Please refer below images as I'm still a newbie at linux.
View 13 Replies View RelatedI cant get openSuse to find my wifi adapter or it does not have the driver installed.
My wifi adapter is the Realtek RTL8191SE 902.11b/g/n
I found a linux driver on the internet, but it asked me to run make in the console and when I did so it said that it couldn't find make.
how to install make from openSuse without the internet (I'm using my windows partition).
Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
I have been having a lot of problems trying to get my wireless card working. I am running ubuntu 10.04 and ever since the install, the wireless detects the network, asks me for the password, then, hangs for a while and asks me for the password again.
Its a fresh install.
Here are some outputs i got from the terminal. There are a lot of outputs i just put into a few text files.
This is a brand new install of 11.4. While trying to set u p for wireless, when I click on network manager it does not open. Do I need to re-install? I am using a Toshiba Satellite , dual booting with XP. The install was seamless, and picked up all my files from the previous distro. Now the big bugaboo, wireless, but I can't seem to get oout of the starting gate if I can't get to network manager?
View 2 Replies View RelatedI'm about to chuck my Ubuntu Dell Mini Laptop in the trash, have tried everything and read everything, but there seems no easy way to install the wireless drivers.
View 9 Replies View RelatedWhen using the b43-pci-bridge driver for my broadcom card I can't get the wireless to work while if I use the wl driver it does. This is the only problem that I have that I can't use the wl because it doesn't allow me to change the mode of the card to monitor where as the b43 is compatible with mode change as well as with aircrack.
This is what lspci -nnk shows:
Code:
06:00.0 Network controller [0280]: Broadcom Corporation BCM43XG [14e4:4329] (rev 01)
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
and neither network manager or iwconfig show blank while using the b43 driver but using the wl they do work....
i have ubuntu 7.04 and i have wireless driverAtheros Hardware Access Layer (HAL)but i cant get it to work in restricted drivers it's checked as enabled but status is not in use how do i fix this
View 9 Replies View Relatedi have installed ndiswrapper, and the correct drivers for the wireless card.
Code:
ndiswrapper -l:
bcmwl5a : driver installed
device (14E4:4320) present
I seemed to be having a conflict with the generic drivers which loaded for my wifi device 'b43-pci-bridge' and the ndiswrapper drivers i installed.
So i ran the command 'rmmod ssb' and now my broadcomm wireless device is "unclaimed"
Code:
lshw -C Network:
*-network:0 UNCLAIMED
description: Network controller
product: BCM4306 802.11g Wireless LAN Controller
vendor: Broadcomm Corp.
[Code]...
Just upgraded to Lucid from Karmic. First thing I notice after restart is that I have no wireless. No big deal, I probably just need to re-install the proprietary drivers. I go to do this, and it gives me an error message, saying that the installation has failed. This has never happened before, and didn't happen when I upgraded from Jaunty to Karmic. I have an HP dv6 1230us and a Broadcom STA card.
I really need the internet to be working, and didn't anticipate that an upgrade, of all things, would screw it up...
I have just completed a clean install of 10.04 and my wireless is not working.It detected my hardware and installed the drivers. It is activated in the hardware Drivers section and the wireless button light is lit.When I click the connection icon in the panel the wireless has nothing to connect too and says disconnected. The Ethernet connection is working fine.BTW the wireless worked just fine in 9.10.
View 2 Replies View RelatedNo wireless networks can be recognized in Ubuntu, and now after several attempted fixes, my wireless toggle button won't switch from orange to blue. My wireless card is Atheros AR5001. I posted in the absolute beginners forum, but I've played around so much that I think I can move on to this one I'm so sorry if posting another thread is bad etiquette, but I need to have wireless access by Friday morning, and am slightly desperate.
Attempted fixes: First, I installed the backport modules using Synaptic. Then, I installed the madwifi driver. After those failed, I used ndiswrapper to install the Windows driver (linked from the ndiswrapper page). I made sure to disable the madwifi driver and restart first. My output all looks normal--I blacklisted everything mentioned in google searches. Here is the current output of ndiswrapper -l:
Code:
ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in
[code]...
I cannot get my Sabrent USB wireless adapter to work, please help me as I am a beginner in Linux! In their readme, they have two methods:
1.) Compiling a driver from the source code, but they do not give any instructions and I am lost on how to do that.
2.) Copying the firmware files directly to the lib/firmware folders. I did that but when I ran sudo ./wlan0up and sudo .wlan0down, but everything I do results in a "Could not get interface for wlan0"
installing the proprietary Broadcom wireless driver for my desktop computer. I have attached this to a LAN and the proprietary driver doesn't load.
View 1 Replies View RelatedI'm going to install ubuntu on my computer, currently it has windows XP installed.
I'm trying to locate the wireless drivers because I will use them for NDIS wrapper when I have ubuntu installed.
But i'm not sure where I can find them and what the names of the files are.
I installed Maverick earlier today on a Dell XPS M1210, and everything works beautifully, except for one thing: the wireless card. It is an Intel 3945ABG wireless card, and I've tried searching around and have found nothing,
View 7 Replies View RelatedI just re-installed Ubuntu 10.04 and was trying to install the Broadcom STA wireless driver. It worked for me before with no problems, but now when I try to install any proprietary driver (using System >>Administration >>Hardware Drivers) I get an error message that says: "You are not authorized to perform this action". I am the only user and I have administrator privileges, so I do not know why I am getting this.
View 1 Replies View RelatedI am looking to reinstall Ubuntu on my desktop computer, in a dual-boot configuration. The system I am installing to should prove no hassle, but my biggest concern is my wireless card. It's a D-Link DWA-510 wireless card. Checking the D-Link website, they do not seem to have Linux-specific drivers available for that model, so I am wondering if there are compatible drivers available in Ubuntu?
View 4 Replies View Related