I have a samba share that was previously hosted by and accessed by Windows operating systems. As a result the filenames of all the files are not very command-line/linux friendly. I need to get a script or app that can go through the samba share recursively and change all file names to lowercase and replace spaces in the names with a ".", "_" or something.
View 9 RepliesOn one of my Samba shares on my server I have a folder of mp3 files of my CDs. The one I am having an issue with is "Clarence Carter/Dr. C.C." (yes, the one with the ULTIMATE party song). The "Dr. C.C." folder name is normal locally on the server, but across Samba it comes out "DMOU3A~H". It's definitely Samba doing it, because I get the same result whether accessing the share from Linux or Windoze. I can still access the folder this way, but it would be nice to not have Samba mangle the folder name this way. I am using Samba 3.4.2 on an Athlon64 X2 system running Slackware64.
View 1 Replies View RelatedI would like to use the command line to compare two directories against each other. I have two folders called music collection that have evolved over the last year on two separate computers. 90% of the two folders are the same, but there are small differences. I would like a solution that will print out all the differences so I can analyze them and choose what I want to do with them, before merging the two folders. for example.I would like some kind of output that shows the differences and where its located.
comparing MusicCollection1 and MusicCollection2
dif1.mp3 located in MC1/folder1 (this one I might want to keep and merge over)
dif2.mp3 located in MC2/folder3 (while this one I might realize does not exist in both folders because I deleted it for a reason)
I've looked at sort, uniq, and even tried scripting my own solution, but haven't come up with an elegant solution thus far. Its important that it is recursive because there are about 15 folders in Music collection and more folders under those 15.
I have to rename a group of machines in my little samba domain (tbd backend) but there is an ugly bug that makes this impossible. have set 'rename user script' variable corectly, also checked all configurations.When i change computer name in my windows box, it shows an error saying something like "Error calling remote procedure"Looking on server side, username for the machine gets correctly changed in /usr/passwd, and also in samba database.But samba log says:
===============================================================
[2009/10/08 11:10:32, 0] lib/fault.c:fault_report(42)
INTERNAL ERROR: Signal 11 in pid 11052 (3.0.33-3.7.el5_3.1)
[code]....
I have an openSUSE 11.1 (64 bit ) machine file sharing with samba in a mixed os enviroment [ linux , winxp , mac ]and the share appears in network nghborhood on pcs ok , and the sharing is ok .But-- ther is 1 matter that i would like to change.in network neighborhood the machine name appears asSamba 3.2.7-11.7.1-2373-SUSE-CODE11 (NameMyMachine)the NameMyMachine is just fine but the 1st part --Samba 3.2.7-11.7.1-2373-SUSE-
View 3 Replies View RelatedAfter upgrading my ubuntu server from 9.04 to 10.04, the window computers couldn't resolve samba shared names anymore, the error code displayed by Windows was 0x80070035.
I was using the ubuntu server as a samba server, using 'share' as the security authentication method, it has been working very well under previous ubuntu versions but, after upgrading to 10.04, the windows computers can't access the server shares anymore; the linux computers don't have any problems (I can access the shares from linux).
As a workaround, I've added the name of the server in c:windowssystem32driversetchosts; but I'd like to know how to fix the problem without modifying every windows computer.
I just installed a CentOs 5.2 Linux server and I'm trying to configure Samba. The file names of files created from the windows workstation are ok, but the file names of files created from the Linux server appear with different names than them are supposed to have. I've checked the Samba configuration file but I can't find options for fixing this trouble. Samba version 3.033375
View 6 Replies View RelatedI need to allow my Windows users to be able to check off "Read-Only" or "Hidden" attributes on our Samba share. Currently its not allowing me to do so.
After searching online, I set the map readonly, hidden and archive option to "yes". Then my entire files were hidden.
I'm having a hard time understanding the concept of the "map" option in smb.conf
Attempting to set up a Samba network from my SuSE 11.2 desktop to a windows laptop. Using YaST, a Samba server has been created, and allow users to share has been clicked. Identity is not a domain controller. no trusted domains have been set, and no LDAP settings have been set.
Right now, each computer can see the other over the network. When clicking on the network from windows, a window pops up requesting a user and password.
Konqueror sees both computers under smb://. It also has a window that pops up requesting user name and password. Where do I set up these user names and pass words?
I have a bunch of files on a Ubuntu box, which have various characters in their filenames that Windows doesn't accept (mostly ":" and "*", but possibly others).What's the simplest way to get these all renamed and moved to a Windows machine? It's OK to replace these characters with something like "[colon]" and "[asterisk]".
View 1 Replies View RelatedI use amarok 2 and I have a lot of files that are titled "Track #.mp3", in Amarok I have changed them to see as the real songs but the actual files are still the same. Is there a way to change the actual file names using amarok to match the tags I have inside of amarok? The reason why I'd want to do this:
1. If my home folder becomes corrupt I don't have to redo 100's of songs (I have a backup but none the less
2. If I ever decide to use another program or if I'm in W7 using Windows Media Player classic it'd be nice to have it recognize the correct files without having to double up on the tag editing
If this isn't possible I'm going to wishlist it because I think it's functional and having a bunch of Track# files is a pain but impossible to get around when you have a lot of mix cd's.
I have a problem with file names changes. I have a hundred of file with same names and different subdirectories. I want to change that file names by their subdirectery names.
Currently is:
file name------------------------subdirectory name
1_km_16_days_EVI_s2_01200_01200.img --> MOD13A2.A2000049.h23v03.005.dir
1_km_16_days_EVI_s2_01200_01200.img --> MOD13A2.A2000065.h23v03.005.dir
1_km_16_days_EVI_s2_01200_01200.img --> MOD13A2.A2000081.h23v03.005.dir
...
I want to
MOD13A2.A2000049.h23v03.005.img
MOD13A2.A2000065.h23v03.005.img
MOD13A2.A2000081.h23v03.005.img
I am trying to copy a large number of files from a Linux server to a Windows file share. Unfortunately, all of the files and folders I have to copy have 10 numbers followed by 2 colons "::" in the name (example: 1234567890::WordDoc.doc) which of course is invalid in windows naming conventions. So now I'm trying to come up with a way to change the file and folder names on the fly to replace the colons with a dash "-" or space " ". I'm even willing delete the frist 12 characters in necessary. I have tried cp, mv, tr, and several -bash scripts but get no positive results.
View 4 Replies View RelatedI would like to change file names in two ways
1)
1.jpg -> 0001.jpg
2.jpg -> 0002.jpg
...
x.jpg -> 000x.jpg
...
xy.jpg -> 00xy.jpg
2)
5201.jpg -> 5001.jpg
5202.jpg -> 5002.jpg
...
5xyz.jpg -> 5(x-2)yz.jpg (where x >= 2)
I had a connection to my other Windows computer the other day automatically in the Places-->Network-->Windows Network folder but it now seems to have disappeared. I tried going to Place connect to server and typing in the WIndows computer name but it won;t connect and errors out. I also tried the IP: Cannot display location "smb://%5C%5C192.168.1.36/"
View 1 Replies View RelatedI have set up a computer to use as a file server using Samba. I attached a 1TB hard disk to it and had the system to mount it automatically. I have 4 user accounts which will be able to access this network share. An administrator account is called "server". I'll call them user1, user2 user4. This is the folder structure:
+-/mnt/FILES
+-BACKUP
backup files (accessible only to "server" user)
+-MUSIC
music1.mp3 (read only files for all users)
music2.mp3
[Code]...
I don't know which groups I should create. I'm having a hard time setting file/folder permissions. And I wanted to know how to set Samba so that it won't ask for a password when accessing public/group files, but asks for it when accessing private user files.
I am trying to compile a LaTeX document using pdflatex on a CIFS/SAMBA network share.
The file compiles fine on the local drive.
Then if I copy it on to the network share and run pdflatex foo.tex I get:
Code:
This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian)
entering extended mode
! I can't find file `foo.tex'.
<*> foo.tex
I can view the file with less, so it's not permissions.
My fstab mounts the drive as:
Code:
//someserver/dir /mnt/mountpoint cifs user,username=****,rw 0 0
I'm swapping from an OpenBSD 4.5 DHCP server to using Ubuntu 9.10 I notice in /etc/samba on Ubuntu there is a file called dhcp.conf with the singular line "wins server ==" There is no corresponding file in OpenBSD so how do I configure this file
View 2 Replies View RelatedI have a folder on my linux server and I want to be able to share files to windows users in this manner :
1. Require login with username and password when accessing file share.
2. Files created by logged in users become owned by them (I can create local accounts for this matter to all the users).
3. Depending on permissions files created by other users can be read only by logged in user.
I thought of going in samba way for this but I'm not familiar with samba enough to make something like this. If any other sharing method is required I can go for it since I'm doing this from a scratch but that only if its not possible with samba.
I need to replace ":" from multiple files names, since I am going to copy those files from a linux partition, which admit the ":" to a FAT32 partition, which does not.
Example:
original name: eg06_ana_21-05-06_09:21:03.JPG
wished name: eg06_ana_21-05-06_09-21-03.JPG
I have googled a lot but I have not been able to adapt the examples given by people to my aim.
It seems that rename command is what I should use, but I have no idea to build the correct pearl expression.
I am having slight issue with setting up file sharing. I have a windows 7 pc and hp proliant microserver running. I have a raid array which I am using as a share for storing music, pictures etc. When I reboot the debian server I can't connect to the server from the windows 7 PC (I have mapped a network drive) until I go on to the server and restart samba with /etc/init.d/samba restart - then everything works fine. I can ping the server with both ip and hostname but the network drive does not connect - this is straight after a reboot. Is the /etc/init.d/samba restart doing something differently to when the server boots? I have read several posts relating to printer sharing issues which point to samba not starting before cups so I am wondering if samba is starting before some of the relevant networking services.
View 2 Replies View RelatedI am running Ubuntu 10.4 [64bit] on a AMD dual core with 4gb of RAM. My Problem: I am mounting to a Windows share from my Ubuntu box and everything is working as expected however, when a file is added, deleted, or modified the Ubuntu File browser does not reflect that change until the next refresh. The Windows users with Explorer will reflect the change immediately and automatically.
Is there a way to make the Ubuntu File Browser respond like Explorer when mounting to a Windows share? I call this behavior "maintaining state".
I'm trying to share a file via Samba on a Ubuntu server that is actually stored on a FreeNAS box. The FreeNAS drives are mounted via NFS and the Samba share contains a symlink to file on the FreeNAS drive.Browsing the Samba share I can see the file and size, but any attempt to read the file fails. It complains about authentication but all credentials across all machines are the same.So, is it possible to share a file this way or is there another way to do this?I know I could create all the profiles on the FreeNAS box but for convenience and ease of maintenance I was hoping to do this via the Ubuntu server
View 1 Replies View RelatedI feel ashamed for even asking this, since it seems like there's about 3 samba questions here every day. However after an hour of searching, I keep finding strange variants that aren't what I need.
My Goal: Create a single file share on an Ubuntu Server - share it via samba to Windows clients that are on a domain with active directory. It sure would be nice if AD authentication would work - so users don't have to type in a linux user/passsword each time they want to access the share.
In my adventures, I've found the following items (which may overlap)
1. Joining the server to a Windows Domain
2. Turning the server into a Windows Domain Controller
3. Authentication with LDAP (still not quite sure how/what this would do)
4. Stuff with Kerberos
5. Lots of people bickering about Samba 3/4 & how it's impossible to make Samba a PDC.
I'm not sure if I need to make the ubuntu server a domain controller or not...all I want to do is create a file share and share it on the domain...I don't need to make the ubuntu server a domain controller for that, right? Maybe just a member? Maybe nothing at all?
I guess if I want to authenticate stuff correctly (or forward authentication requests? Not sure), I probably need to join the ubuntu server to the domain...I think.
But let's say I do join it to the domain...then how to I create a file share that is authenticated via active directory rather than a local ubuntu server account? I see a dozen guides on joining the server to the domain, but nobody ever mentions sharing the folder over the domain.
The lines are also blurred between joining Ubuntu to the domain and making it a domain controller. What should I keep an eye out to avoid in these tutorials?
I get lost between the Kerberos/LDAP/Samba/WinBind etc...and I have a feeling I don't need all of these for something this simple.
System: openSUSE 11.3, Gnome
In the Windows network, there are 2 or more shares as follows:
I can access both shares in nautilus e.g. "smb://bla.bla.company.com/share $". The shares are mounted then in "home/user/.gvfs/". ok.
In one of shares, is a file-based repo, which I can access easily with svn.
Unfortunately when I try to checkout any normal folder from a share (as in MS$ with Tortoise), I fail...
What's more in the file-based repo, external references exist to other shares in the network, the name is as "file:///X:/folder/file.txt". SVN gives error messages about such references and does not access files (where "X:/" is also mounted, but as a "test$ to smb://bla.bla.company.com/test$" in "home/user/.gvfs/ ").
My questions:
- what is the best solution to mount shares, so I can access all the SVN repos?
- How can I access normal files and folders from a share with svn?
- How can the problem with external file references in a file-based SVN repo can be solved? without to checkout/commit files "manually"...
- Some checkouted scripts (Perl, etc.) use libs from shares:
"Use lib qw(r:/tools/perl/lib/). how to get around this as well?
- How can I change mount-names: "test$ on smb://bla.bla.company.com/test$" to something like "share-test$?
- How can I change the mount location? in "home/user/SAMBA/" instead of "/home/user/.gvfs/"..
I had tried to use "fuse-smb": installed, created config, but when I run "fusesmb /home/user/SHARES/", i get an error message: smb.conf is missing.. Where can I get this config?
And one last question: Can someone recommend me a svn-gui? i have tried tried rabbitcvs, esvn and some others .. but all either do not work or crash.
I'm not sure, but maybe I can use svn and tortoise in wine, and checkout/commit the necessary files from/to "home/user/project/"? there raises the questions whether it is possible to install tortoise in wine and how to mount the shares on the wine? How to manage the hard-coded lib-names in some scripts...
have a server here running opensuse 11.3 that I need to access via network using samba.
Samba is working so far and I can ping the serve and browse the shares from windows (WinXP) computers; but only via the IP.Now I've read up on samba on this forum and other sources, like the official samba documentation and compared my smb.conf with an older one on another server which works (and even copied this one over to the new one) - to no avail.I seem to be missing something and I just can't find it.Since the problem is probably not in the smb.conf (previously working one doesn't work on new server) - where else could I have screwed up?
I've got a samba share on a linux server, connecting to it with a windows 2k3 server via tools > map network drive. The goal is to be able to use windows to change the security of the samba share. The good news is it works! The bad news is it's not QUITE perfect:
The share is called /company. I started with the following to give everyone access to everything, set the owner of the share to administrator (my domain admin on the Windows domain), and set the group owner to domain users (group that everyone on the domain is part of):
Code:
chmod -R 777 /company
chown -R administrator /company
chgrp -R domain users /company
I then mapped the drive as a regular user, and of course, can access/modify/delete/rename/create anything I want. Then I picked a folder to lock down. Let's call it /company/myFolder. I did this on the Windows server by mapping the drive as administrator (the owner), right click > properties > security tab > advanced > highlight "domain users" and "everyone" and click edit > clear all (i.e. remove all access). Go back to Linux and
[Code]..
The only issue that remains is that I am able to rename/delete "myFolder" as a regular user. I thought this was coming from the "acl map full control = true" parameter in smb.conf, but I changed it to false and verified the change and it still happens. If I remove group and world write access to /company, I am no longer allowed to rename/delete myFolder, but then I can't create a new folder. If I add group write access back in I can create files but can also rename/delete folders within /company that have --- specified for group access. Any ideas what I need to tweak to make this right?
I'm having problem with the Samba 3.2.5 file share which host my MS-Word Document the user (user1) already restart her PC but still she cannot open the file from MS Word.
Here's the file and it's status on the samba drive:
Code:
How to reset the Samba file locking mechanism ?
I upgrade from 11.2 to 11.4 and now, my samba share does not mount at boot time. I see nothing in the log. What is changed in 11.4 ?
View 6 Replies View RelatedI have a samba server on my LAN. It can be accessed without any problems from Windows machines on the LAN without password. I have two computers that I have updated to OpenSuse 11.2 (both used to run 10.3). Since doing this upgrade I can no longer access the samba share from the Suse machines. Basically, both Dolphin and Konqueror ask for a username and password to access "avoca" (the workgroup).
View 9 Replies View Related