After ripping a dvd I removed the large file succesfully with rm command. since then I get a message "trashcan full, empty manually" when I want to trash a small file. Can is empty and has a capacity of 500 MB How to get the can operational again?
View 9 Replies
I'm on Debian 6.0
and 4 TB of HDD
Compaq Presario 9000
My problem is all of a sudden get a message on deleting files that the trashcan has reached its full capacity and needs to be emptied manually. After emptying the trashcan in Dolphin I still can't delete the files I want and get the same message again and again. I have shut down the computer before, but today that didn't seem to help at all. Also it seems a bit drastic to shut down the machine everytime this happens. Is there perhaps another 'manual' way of emptying the trashcan? I have found a post recommending to rm -in my case- the directory in question in the terminal, which worked, but it doesn't solve the trashcan problem.
On my home test 5.5 VM, after converting to ext4, moving items to the trashcan in Gnome results in nothing showing in the desktop Trashcan. Looks like a bug in gnome-vfs' support (or lack of it) for ext4, or have I got some other more subtle corruption going on? It's of little importance to me as I'm rarely in the GUI, but it would be nice to see confirmation or otherwise.
View 7 Replies View RelatedRecently I moved to trashcan a big amount of data to be erased, but when I tried to erase the data it refuses to do it and keeps telling me I have to manually clean the trashcan, so anyone can tell me how I do it? opensuse 11.4 KDE 4.6!
View 1 Replies View RelatedI finally upgraded my P4 3ghz to a dual core and replaced the onboard Intel video with a nice new Nvidia, all fine except my trashcan icon has vanished from the desktop, its enabled in gconf-editor, Ive tried disabling it, re-booting etc, but it wont come back!
View 6 Replies View RelatedWell I'll start off with the recent changes I've made. I have three hard drives in my PC, two of which are formated NTFS. I recently installed Storage Device Manager and changed a few options around so they auto-mount of start up. Well when I did this, and wanted to delete files off those drives, I suddenly was being promoted that I must delete them permanently or not all at (wouldn't go into the trash)
I added the lines to FSTAB: uid=1000,gid=1000 0 1
So for example my secondary drive is:
nls=iso8859-1,umask=000,uid=1000,gid=1000,0,1
And also added .Trash-1000 folders in each of the two NTFS drives.
When I delete items off one of the two NTFS disks they go to the trash... I don't get the "delete forever" prompt and I can actually see them in the trash bin.
But when I empty the trash the icon remains that of the "full" trash, despite when I open it there being no trash in it.
I got this error message when i tried to delete a video. i have cleared my trash bin but i still get this error message.
View 2 Replies View RelatedI've been getting this error message:"The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."a few times, and it turns out to be because of low disk space. No worry, I empty the trash uninstall unneeded programs and clean out the downloads folder that filled up my disk. And all is ok. But not this time.Since I can't use X, I delete stuff from the terminal, and also make sure to clean out the .Trash in both /home and /root. But still the disk is full. I delete more stuff, but it doesn't even seem to go to .Trash. It disappears, but no more disk space.
View 8 Replies View RelatedWhen browsing my external hard disk I noticed that Nautilus' side pane marks directories that contain files as empty. Is this a bug or a misconfiguration on my part?
View 1 Replies View RelatedUsing Fedora 14 with Gnome 2.3 Desktop utilizing Compiz and Emerald theme manager. When I empty the trash, the icon is still the FULL Trash icon. I tried using different Emerald Themes, and different Icon sets, but still the Trash Icon stays full. I checked the trash folder in $HOME/.local/share/trash and found nothing, no hidden files.
View 3 Replies View RelatedI have the following problem since yesterday.
Trying to update manually provides the following error message
I can't access fedora.project.org any more!
All other web access runs fine as usual.
It reads dpkg was interrupted you must run sudo dpkg manually to correct problem. I tried the terminal options and still nothing.. The thing is I am trying to install other packages and it says have to close that one out first.
View 1 Replies View Relatedim trying to update some software in ubuntu using the update manager. i type my password in CORRECTLY but then get this error message.
E: dpkg was interrupted, you must manually run 'dpkg --configure -a' to correct the problem.
E: _cache->open() failed, please report.
what does it mean and how do i fix it?
Im trying to instal Sun Virtualbox but when download completes and I click on install I get the following error>>Message did not receive a reply (timeout by message bus) I wont even bother with this software if there are others out there that are as easy to use. I used it on Windows and thought it was great ! (thats how I eventually switched to Linux, by using it virtually at first)
View 5 Replies View RelatedThis obnoxious bar has just appeared in Smplayer at the top of the screen. It stays there even when I go full screen. Now full screen isn't full screen and there are black edges on both sides of the screen. I have not be able to figure out how to hide it. I do not need or want this onscreen display. How can I configure Smplayer to make this go away? How can I get my 16:9 full screen aspect ratio back? I have done nothing to mplayer or smplayer as far as editing any or changing any configuration files. I tried several videos and it displays on all of them. It was not there last time I used Smplayer.
View 9 Replies View RelatedI got a hold of openSUSE11.2 recently, burned it, and booted the disc up.Now i got a problem.I ain't too experienced in partitioning, so i choose everything as selected in the installation(i downloaded the full DVD, not a live CD)and i got to the partitioning part.I have this:
500GB WD Caviar Blue SATA2
80GB ATA
I installed Ubuntu on the 500gb with wubi and partitioned 30GB for it.Well that one is easier, i have absolutely no experience in installing from a CD/DVD.I saw instlux, but it wouldn't run from Win7 Any guide on how to manually partition 30GB for openSUSE too?
Whenever i try to empty the Trash (As Root) it does so then gives me an error message saying that it can't delete a specific file. It's always the same file and it says:"The file or folder /home/.Trash-0/files/yesterday once more.mp3 does not exist."Having looked in this location logged in as root using both Dolphin and at the command line, this file doesn't exist.
View 9 Replies View RelatedI was copying an .avi file to an external hard drive and half way through the copy the drive reset and required remounting. Consequently I have an empty .avi file on the hard drive. I tried to recopy the file and overwrite, but I keep getting 'Could not write to media/harddrive/filename.avi'. I tried to rename to file to be copied but got the same response, I cannot delete the empty file either, as I get an error telling I cannot delete it. I have tried to do this as the user and root with the same result.Any other file I tried to copy onto the external hard drive is fine, just this one zero length file and the file I was trying to copy, the original of the file. I also tried to delete the file on another computer but couldn'tExternal hard drive is a WD elements ntfs, which works great except for this glitch.
View 3 Replies View RelatedI have some files in my user trash bin which don't get emptied. Can you please tell me where I can find my trash bin using Superuser Dolphin? Or how can I force empty it? I tried /home/.Trash-0/files but it's all empty.
View 9 Replies View RelatedWhen I say info, I get an empty document: nfo: (dir)Top, 1 linii --AllWhen I say info -f /usr/share/info/dir, I get the same.When I open /usr/share/info/dir in KWrite, I notice that there are tabulations in the Node: declaration.When I removed these tabulations, the directory suddenly displayed all right (info -f /tmp/dir).So I tried the same thing with the file extracted from the current package, and it contains tabulation characters, so I can see nothing there with info.
View 5 Replies View RelatedStarting Yast and then config. repos. gives this error: There were errors while restoring the repository configuration. Error refreshing service Packman Repo (http://packman.inode.at/suse/11.3/packman.repo):Parse error: repoindex.xml[1] Document is empty
If I continue my repo list and software management both come up okay and function as they should (nothing noted yet anyway). Is this just something that glitched when adding the Packman repo and the file repoindex.xml[1] should be deleted?
I have Win7. I partitioned my C: and made a empty F:(97gb). I want to install 11.2 on F:.
1) At Sys Ananysis I get; The partitioning on disk /dev/sda is not readable by partitioning tool parted... You can use the partitions on disk /dev/sda/ as they are. You can format and asign mount points on them. But you can not add, edit, resize, or removefrom that disk with this tool. I click OK
2) New Installation, Use Auto Config
3) Time Zone
4) KDE (same results with Gnome)
5) Partition Based. I go to Create Partition Setup.
6) In CPS I get
[Code]...
I have a mysterious filesystem issue with openSUSE on an old machine. Installation wasn't very pleasant but worked finally. It boots fine. However after 5 or 10 minutes, all filesystems vanish. Most programs (but not all) cannot be found anymore. "ls" output is empty everywhere. "top" used to work (it was working on a ssh connection that I just lost). Now it complains about unset TERM variable. I was able to set it again to xterm. Now "top" is working, displays the running processes : mysqld, Xorg, icewm (my WM), nothing strange there, nobody is eating up the resources. I have other linux installed on that machine : Ubuntu freezes occasionally, mostly with Gnome, but it seems to be a totally different problem (maybe related to the radeon driver) ; Mandriva works fine so far. The two IBM 120 GB harddrives are quite old but the manufacturer fitness test didn't find failures. I also checked for bad sectors before formating in openSUSE setup. It doesn't look like a physical I/O problem. In such a case, it would crash or at least complain about not being able to access the HD. Well ... I switched to console but I didn't get any login prompt and now I cannot switch back to X. I can still ping the machine but of course not ssh to it. SysReq keys (although enabled) doesn't work. I guess I will have to reboot brutally. Last time it took me about one houre of pressing 'y' tp repair the filesystem with Ubuntu. I'm sure I will be back soon. What do you guys think about that situation ? I suspect a kernel issue with that hardware. Have you heard about similar problems ? I'm afraid I will have to reinstall 11.1, which used to work fine, on that machine.
Some details about the hardware : The (onboard) Promise controller and the SATA controller are not used. The 2 HD are on the first IDE interface as master and slave.
|----------------------------------------------------------------------------|
| * Mainboard
[Code]....
I gave upon 11.3 M4.Tried installation by text mode but there's another screen showing various USB devices status superimposing on the Linux text install. Returned to Live installation via Live CD. Installation completed > restart >autoconfig failed. Tried live installation again but Suse kept suggesting installing into one of the empty 2 Gb partitions. Also had problems with Gparted Live 0.5.1-1 CD because somehow the keys froze. Had to replace it with 0.5.2-1. I am installing 11.2 on a laptop but right now I am stuck with frozen "Creating cache files for fontconfig". This has taken over an hour and nothing seems to be happening. I have successfully installed openSUSE 11.2 on an older laptop and a desktop. Also experienced installing Windows 7, Ubuntu and PC-BSD on both types of machines.
View 9 Replies View RelatedI have use Firefox most of the time, but I do not trust this application anymore. (too many straight modifications, and strange application behavior when using it). For some things i use Firefox, so I do not want to delete Firefox from my system entirely. I have installed the Opera Browser on my system, to use it as my main browser. Question 1. Where and How can I Set opera to be my default browser of my Open Suse O.S.
View 3 Replies View RelatedI'm supposed to migrate a website I'm working on from Windows to Linux, so I downloaded the whole site from its webserver to my Linux enviroment, but, although everything work perfectly under Windows, on Linux all the scripts just won't load, and I ain't got no idea of what could be the problem causing this - but I had installed phpMyAdmin and it worked fine. I'm using Apache 2.0 (2.2.17-4.5.1), PHP5 Module for Apache (5.3.5-5.14.1) and MySQL (5.1.53-4.7.1) under openSUSE 11.4 x86_64. Oh, I had the same problem when trying to load the page under Mandriva 2010.
So I tried to reinstall Apache as well as PHP and phpMyAdmin following the instructions in here step by step, but, after reinstalling these not even phpMyAdmin is working anymore, and if I call a(ny) php page from localhost in the browser, a download window pops up, which means Apache doesn't recognise the php ile as a script to be executed by php machine, or something like that.Looking at httpd.conf (apache configuration file) I noticed there's no reference to php module. I tried to manually configure it, but it seems there's also no libphp5.so in my computer (tried to find it using dolphin's search feature)... I guess I'll have to unninstall everything php related and then try to compile PHP from source and just thinking of that already gives me headaches
I am not the most computer savy, so bear with me. I have opensuse installed on my usb hard drive and recently had a windows crash that caused me to lose my opensuse boot menu/grub. Before the crash I had to have the usb drive plugged in in order to boot to windows or opensuse or I would get an error at startup....... I would like to avoid this. Is there anyway to make it so that when I turn on my computer It boots directly to windows, and if I want to go to opensuse then I can plug in my usb drive and manually boot to usb from my boot menu? I would run these two together on my computer but I share this computer and having to have my usb drive plugged in all the time kind of made them mad. So I guess my question is two fold..... Is this possible? And if so can I go into my hard drive through windows and place something in there to allow me to boot to it since my grub is back to the origional windows boot or do I need to use a live cd to access opensuse and do it that way?.
View 1 Replies View RelatedI have opensuse 11.2 with KDE installed and I changed the default File Manager to Konqueror. I cannot empty the Trash when right clicking on Icon in KDE4. If I try, then I get Icon Settings. Howto switch off these Icon Settings generally?
View 2 Replies View RelatedI just installed proftpd using webpin but when i tried to gonfigure it ,i figured out that the configuration file proftpd.conf is empty, is it about permission ?i just dont get it!
View 1 Replies View RelatedWhen I type dmesg, it returns empty output.any idea why this would happen?anyone has tried fixing this problem?
View 2 Replies View Related
