Everything is a breeze with xen and opensuse... but one thing... I CANNOT make it run, which means whenever i tried to create a new vm or guest OS... it will logout.... and then when i log back in... the guest OS or DomU has been created in the virtual manager... however if i try to open the guest machine to view the graphical console... it logouts again.... i reinstalled too many times now...
View 9 RepliesI have been running kernel-2.6.33 (gentoo) with a graphical console which appears after the grub screen. My kernel parameters include `vga=0x317'. Since I upgraded my kernel I have only been able to get a 80x25 text console. If I use `vga=0x317' I get a black screen after the grub prompt. I have tried using `vga=ask' and choosing a number of resolutions - with no luck.
I've tried a "vanilla" 2.6.34 config and also a bootable Sabayon Linux disk with 2.6.34 - with the same result. Interestingly Sabayon Linux eventually fired up X successfully - after a black screen while it was booting.
Its looking like 2.6.34 doesn't like my hardware.
Here is some info about my hardware:
# lspci
Here is my kernel config (relevant bits):
I have a web server that hosts multiple websites. Am looking for an application that can be run on my workstation and makes it possible to watch Apache logs live.
It should have a tabbed interface. When I launch the application, it has to connect to my server and should automatically open all access.log and error.log files and display all changes in real time (similar to tail -f command).
Does anything like this exist?
I'm tired of logging in many times in Konsole and executing tail -f commands to see parallel logs.
I need to let a second user configure a part of my server and I wish to both log what the user is doing with terminal and view it in realtime so that I can react if something goes wrong.
View 1 Replies View RelatedI just installed Presenter Console 1.1 extension for oofffice impress. I would like to view notes while showing the slide show. I think I should be able to do this even when my CPU is not connected to a projector. However, I do not know how to activate the mode for viewing notes. I can see that the extension is installed by going to tools-Extension Extension Manager (the extension is locked and the disable and activate buttons are grayed out?).
View 1 Replies View RelatedI just installed 10.04, and its taking me to the console login, rather than the graphical login. When I tried the live cd, the graphical environment was good. But after installation, I dont get the graphical login , so that I can get into the desktop.
I have a ATI Mobility Radeon X1400 card on ThinkPad T60. Everything was working on 8.10, and I decided to install 10.04 and now it doesnt work.
I know how to manage them from a commandline but I was wondering if there are any graphical partition editors that understand and work with lvm2?
View 1 Replies View RelatedI ma new in OpenSuSe and I want to create virtual Machine using the graphical interface Xen of Opensuse 11. I did'nt find a good tutorial ton use it or a gut getting started with xen in Opensuse.
View 1 Replies View Relatedi was having problems with filesharing with virtualbox, so in another thread someone told me to uninstall the OSE additions and install the vbox additions on virtualbox. I have uninstalled the OSE additions and now i can't get graphical login, it is all on runlevel 3.
View 3 Replies View RelatedI used (openoffice, firefox, vlc) my acer 5920g this afternoon without any problem and without making any strange operations.When I tried to restart it an hour ago it didn't start correctly: i get a screen full of commands like
Code:
Start Unicode mode done
Starting brld done
[code]...
When I run graphical applications as root (on KDE4), they inherit my window decorations setting, and use the default widget style. I know that, obviously, I can configure root's widget style to match mine, but I do like the visual distinction. I just don't like it using my window decorations, because I have that nicely configured to match my widget style (and therefore clash with anything else). Is there any way to tell KWin to decorate root windows differently, or even run a separate window manager for root windows?
View 9 Replies View RelatedI was reading /usr/share/kde4/config/kdm/kdmrc and see this 3 lines:
# Allow root logins?
# Default is false
#AllowRootLogin=false
this doesn't mean that root can't login in a graphical mode? (I can login as root)
[Code]...
I have updated 11.3 to 11.4 with downloaded iso (64 bits). I have a ATI hd2400 card that in 11.3 had no additional or other drivers. Now after install of 11.4 the systems reboots in the splasscreen everytime I am now in failsafe mode to get graphical.
Output of /sbin/lspci -nnk
00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
Subsystem: Dell Device [1028:01c4]
Kernel driver in use: agpgart-intel
00:02.0 Display controller [0380]: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller [8086:2582] (rev 04) .....
Main desktop upgrade no problem. Laptop upgrade no problem. With my Media machine I had a problem the the ATI build-in graphics hardware. During install it did not ask to remove the ATI driver. no graphical UI. Since all the data where backed up anyway and the original install lacked some partitioning, I did a fresh install. Had some problems with sound, which I could fix via the KDE multimedia "phonon".
View 1 Replies View RelatedAfter messing up with gnome3-branding(gfxboot),I removed itow grub is back to minimal.There is no graphical bootloader anymore.I tried reinstalling opensuse-brandingt it says "message not found"
View 9 Replies View RelatedI am having a very strange problem with GRUB: it refuses to boot from certain partitions, and in a very strange way. This is what I've noticed so far:When using GRUB in the default OpenSUSE 11.3 graphical interface and trying to boot it, GRUB almost always gives me Error Message 16: Inconsistent filesystem structure. The GRUB manual says that "This error is returned by the filesystem code to denote an internal error caused by the sanity checks of the filesystem structure on disk not matching what it expects. This is usually caused by a corrupt filesystem or bugs in the code handling it in GRUB. " I've ran fsck on all the partitions and neither of them has any corruption. When I switch to the non-graphical GRUB window, the message changes to Error Message 18: "Selected cylinder exceeds maximum supported by BIOS".
The GRUB manual says that "This error is returned when a read is attempted at a linear block address beyond the end of the BIOS translated area. This generally happens if your disk is larger than the BIOS can handle (512MB for (E)IDE disks on older machines or larger than 8GB in general). " However, I haven't touched any BIOS settings when the problem started to appear, and the BIOS is brand new anyway so it doesn't have such limits. When I try to boot directly from the command line, it roots to the boot partition just fine, but refuses to load the kernel, giving me the error 16 again.
When I try to boot Windows from the non-graphical GRUB list, it gives me the error 18 again, but it always succeeds when I do all the booting directly from the command line. One time I was able to boot Linux from the command line by using rootnoverify instead of root, but never again since then. One time it didn't boot Windows even from the OpenSUSE graphical interface, error 18 again. Sometimes it boots even Linux just fine, but it happens quite rarely now. The problems started appearing just recently, and without any reason that I could think of. I also ran setup again in order to reinstall GRUB, and it worked for one boot, but not any more...
My partition list is like this:
(hd0,0) Windows 7 boot, NTFS, primary
(hd0,1) Windows 7, NTFS, primary
(hd0,2) Windows XP, NTFS, primary
(hd0,3) Extended
(hd0,4) /root, EXT3, logical
(hd0,5) /home, EXT3, logical
(hd0,6) swap, logical
(hd0,7) /boot, EXT2, logical
After installing Opensuse 11.3 i get massive graphical errors after reboot. Those errors directly start after the first resolution change after grub. So i used nomodeset from now on and installed the drivers from nvidia.
After this X11 only flasht up very shortly and i got this logs:
Code:
I had an old SuSE installation (v9 or 10, I forget) on which I used to remotely login to a kde session using xdmcp. I blew this away and installed 11.3, and I just can't get it to work. I'm pretty sure I've enabled all the things I should have. there a bug?(Incidentally, I had the same problem with Ubuntu 10.10 (with Gnome), and eventually found I needed an updated version of gdm. With X tunneled through a PuTTy ssh session I can display individual X windows no probs. Also, a VNC session is rejected out of hand.)
View 9 Replies View Relatedafter a upgrade via DVD (11.3 -> 11.4) which shows no errors, i can't start the Xserver. During Startup in Grub i have an graphical enviroment.
xorg.log says:
Code:
(EE) Failed to load /usr/lib64/xorg/modules/drivers/radeon_hd.so
(II) UnloadModule: "radeonhd"
(EE) Failed to load module "radeonhd" (loader failed, 7)
(EE) No drivers available
but the file /usr/lib64/xorg/modules/drivers/radeon_hd.so is there.
[Code]...
I'm not a Linux noob, but I am far from guru. I'm running a single board computer with a slightly customized Debian Etch (customized by the SBC vendor). No Gnome/KDE/X installed. My application is a control application which uses SDL (Simple DirectMedia Layer) to paint some basic graphics on the VGA. I need to run it as root because the application calls iopl() to access an IO port.If I run my application manually from the command line, life is sweet. From Googling around, I found http://www.debian-administration.org/articles/28, and hence I:1) Created a script in /etc/init.d2) Executed "update-rc.d scriptName defaults" to link the script into the boot sequenceAll very straightforward. My application starts at boot. But when I try to SSH/SFTP into the SBC, I get "Connection refused". So I can't manage the SBC anymore, and this is a big problem. I am not sure if it's relevant, but my application starts before the SSH daemon.My script looked like:
case "$1" in
start)
echo "Starting my application"
[code]...
I am now at my 6th version of my opensuse build and I can't get it to start the graphical login.I am trying my build out on a VirtualBox using the live cd.This is what happens during installation :It will install properly. No error messages at all. I get the (graphical) options screen to select language and screen resolution settings, so far so good.I select the default (top) installation for my opensuse and hit enter.Then I will get the verbose progress and when it's finished, the verbose will ask me for my user name and password.Then I enter those correctly and the verbose will tell me to enjoy.I am then left with a blinking cursor, and don't know what to do next.
This is not what should have happened since in my build I had selected Configuration > Startup > Default runlevel > 5: Graphical loginI can find no reason for this failure since on my Windows system I have tried out several other Linux systems in the same way and never experienced this problem before.During the assembling of my packages I have payed close attention to select all packages required for a graphical login.An other problem is that although I selected the default language for my build to be Dutch, the default language during setup is still English.I hope there is someone who would be kind enough to be prepared to help me out, I am so eager to start trying out my self made OS.
I recently installed 11.3 from DVD Am using Ubuntu Lucid Grub2 bootloader as I have several OS's Updated Grub so that the new kernel version 4 would boot but it boots to a command line... What has happened to my desktop?
View 4 Replies View RelatedI have been working in macromedia dreamviewer for editing html and php files, Just now I moved to linux system by installing xampp , my question is that I need a best html and php editor that supports both the design view and code view as like in dreamviewer.
View 7 Replies View RelatedI used KDE3 with 11.0 with some KDE4 apps till I needed some applications from the KDE4 factory tree and mistakenly left the repository active. Next time the online update also updated most of the applications I would rather keep, and as a result the KDE3 disappeared from the KDM login choices. So I have two questions:1. how to enable users to select KDE3 at login (currently I have to select failsafe mode and run startkde manually)2. how to replay back an update I didn't want to have?
Perhaps a combination of the above: can I upgrade to OS11.2 and keep KDE3? (please don't tell me to switch to KDE4, I acknowledge and appreciate the effort and the improvements that KDE4 got, but it's still not a replacement for KDE3 - there are so many simple things which are impossible in the new version)
I have my first problem with drivers in Linux! I installed openSuSE 11.4 x86 on my computer (Intel Dual-Core 2,5 Ghz; Nvidia 7300 GS) and after installing graphical drivers (proprietary) I can't load the system. All I have is a progress bar of user's profile loading and playing the startup sound. I already installed openSUSE 11.4 x86_64 version on this computer and there was no problem with drivers.
View 8 Replies View RelatedI've been trying to get SELinux working in OpenSUSE 11.2. So far I can get to runlevel 3 with enforcing=0. Before I start tinkering with audit2allow, The 11.2 repository gives me these policy rpms:
[URL]
But that version of policy has some issues in OpenSUSE:
1) failure to allow the graphical desktop to load (even with enforcing=0) . The following message appears in the console during boot:
** (gdm:1073): WARNING **: Couldn't connect to system bus: A SELinux policy prevents this sender from sending this message to this recipient (rejected message had sender "(unset)" interface "org.freedesktop.DBus" member "Hello" erro name "(unset)" destination "org.freedesktop.DBus") startproc: exit status of parent of /usr/sbin/gdm: 1 Since enforcing is off, I'm surprised to see a message like that. SELinux shouldn't be preventing anything, so I don't see how modifying policy will solve that. Ideas?
2) Attempting to boot to runlevel 5 with kernel parms "security=selinux selinux=1 enforcing=0", I'm dropped off in runlevel 3 instead. I'm getting a couple of pages of AVC errors after boot (see below). I've tried several other versions of the policy without luck:
- the version included in Fedora 12 (refpolicy-2.2009117
- the latest release from Tresys
- the latest from the repository at Tresys
[Code]....
How can I start a program from tty1 console text mode to be executed in tty2 console text mode? Actualy I would like to start a program (chat client cli program) in tty8 automaticaly when linux PC boots.
View 6 Replies View RelatedI accidentally configured my desktop in KDE 4.4 to a netbook style interface and can not find a way to change back to folder view. In the netbook view it is impossible to right-click to configure the desktop. what command do i use to open desktop properties (the window where you change wallpaper, view type and so on)?
View 7 Replies View RelatedIs it possible to view and edit db3 files in linux? OpenOffice does not do it and dbview says it can't read version 83. Just wondering. I am not really firm with databases, but i remember that i did view databases in linux.
View 3 Replies View RelatedIn the folder view, when I point to an icon there isa + or - sign next to it. What does that mean?SuSE 11.3, KDE 4.4.4
View 9 Replies View Related