I need to let a second user configure a part of my server and I wish to both log what the user is doing with terminal and view it in realtime so that I can react if something goes wrong.
View 1 RepliesDoes anyone know how to enable realtime scheduling for users without having to install PAM?
View 3 Replies View RelatedI have inherited a RedHat 5.4 server that is having an odd issue. Root and all of the user accounts can log in via SSH. Not a single account can log in via the console (sitting in front of the server). If I bring it up in single user made, I can log in with root all day long.
I want to say that this has something to do with PAM, but this is when I play my "Noob" card. Could anyone possibly steer me in the right direction to figure out what is going on?
Everything is a breeze with xen and opensuse... but one thing... I CANNOT make it run, which means whenever i tried to create a new vm or guest OS... it will logout.... and then when i log back in... the guest OS or DomU has been created in the virtual manager... however if i try to open the guest machine to view the graphical console... it logouts again.... i reinstalled too many times now...
View 9 Replies View RelatedI just installed Presenter Console 1.1 extension for oofffice impress. I would like to view notes while showing the slide show. I think I should be able to do this even when my CPU is not connected to a projector. However, I do not know how to activate the mode for viewing notes. I can see that the extension is installed by going to tools-Extension Extension Manager (the extension is locked and the disable and activate buttons are grayed out?).
View 1 Replies View RelatedI have apache installed on my server. Is there a way to view how many users are on my site?
View 3 Replies View RelatedI am currently tinkering with my SMB configuration in my home server. My purpose is to enable users in the network to view, browse and edit files I decided to share. However, I would like them to do just plain old connect and open the folders without the server asking them for a username and password.
View 4 Replies View RelatedSitting at the console, I log in with any user name and NO PASSWORD IS REQUESTED. I get logged in automatically without entering the user's password.
I did:
passwd joeuser
To change his password and still he goes right in without being asked for a password!
Possibly related- 10 days ago, my smtp server was breached as a spam relay. The username they cracked was deleted. I added fail2ban for postfix. The logs show no further intrusion.
I have several local users on a F11 box. I want to keep one of those users from getting to the network. I could upgrade this machine to F12, if it offers a better solution.
View 1 Replies View RelatedWe are setting up virtual Ubuntu 10 machines that will just be used to launch a portal to our servers. I have the stripped down image created, but would like it to launch the VMware View Open Client software so it took users directly to what we want them to see.Is there a way with Ubuntu to set that to auto deploy on start up? If I could do that it would greatly improve security on keeping users from getting to places we don't want them into
View 2 Replies View RelatedMy squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedI am attempting to mount my Direct TV DVR (HR22) SATA Drive using Fedora 12 x86_64 using the following command:
The output of BLKID is:
I am able to mount this using MSFLive.org LIVECD/USB: [url] and knoppix
I have been working in macromedia dreamviewer for editing html and php files, Just now I moved to linux system by installing xampp , my question is that I need a best html and php editor that supports both the design view and code view as like in dreamviewer.
View 7 Replies View RelatedWhat command to show MAC and IP of any computer conected in realtime?
View 9 Replies View Relatedi need to use the realtime kernel because i use jack audio connection kit so i tried to install the realtime kernel from the install/remove software program. I've found 2 kernels : Kernel-trace and kernel-rt i tried both of 'em but i cannot boot up suse. The first one gets to 3/4 of the loading bar , i hear the welcome sound and then it won't do anything else. The second won't do anything, black screen.
View 9 Replies View Relatedis there a realtime or low-latency kernel in a repository somewhere for OpenSUSE 11.4? I know I can just compile a rt kernel, but that's a bit tedious and I'd like to avoid it if possible.
View 9 Replies View RelatedJust got Studio 9.10 running and the RT kernel installed. I have a Prescott P4 3.2ghz (hyperthreading) and i encountered what looks like a common freeze problem. I am guessing my cpu will not be supported in the RT kernel since it is pretty old now.I added nosmp acpi=off during boot at the Grub2 menu and it booted fine and I was able to capture some video great.
My questions is, if I remove the smp support by using the nosmp option, do I still benefit from the RT kernel or would I do just as well with the generic kernel I have installed?Eventually I will upgrade do a new system board and processor but for now I just got some life back in this one by switching to Linux
I have investigated loads and loads of options and haven't really yet come across what I need.
I wish to stream the microphone input from a PC using Lucid to another PC also using Lucid on the same network. I don't care about the quality, however, latency is really important. I hope to use it to monitor the cries of my baby daughter, so the lower the latency the better.
I have tired various options:
- FFserver and FFmpeg - latency of over 30 seconds
- VLC - couldn't get it to work with my mic and maxes out the CPU
- ssh server 'cat /dev/dsp > /dev/dsp' - latency of around 5 seconds by audio keeps breaking up with huge delays
- icecast2 and darkice - latency of around 7 seconds but no audio breakups
I've been reading on maybe using PulseAudio to stream the input, but I am not sure if it will work or not...
how to get near real-time streaming audio? As I said, it is the realtime, not the quality that is important...
I am not able to start JACK in realtime mode. This is a bummer. here is the error message I get:
p, li { white-space: pre-wrap; } 11:58:20.745 Patchbay deactivated.
11:58:20.746 Statistics reset.
11:58:20.812 ALSA connection graph change.
[code]...
This might be a very stupid questions, but I'm wondering if anyone can tell me if there are any antivirus software for Linux?I know that it normally is not something that is needed, but in the company where I work they have a policy saying that every OS must have a realtime anti virus program installed on the pc's with automatic updates.
View 14 Replies View RelatedI succeeded with the 2.6.31.12-rt20 on the Slackware 64 13.0.Kernel config seems fine, i use PAM.I can launch jackd as user with the realtime flag, BUT...Using top and htop, i can see that /etc/security/limits.conf or /etc/security/limits.d/limits.conf or wherever i put this file, priorities and nice are not set.Of course i added this to this file :
@audio - rtprio 99
@audio - nice -10
@audio - memlock 500000
[code]....
I cannot start jackd in X with realtime scheduling:
[Code]...
I was listening to some Chopin today and I thought how cool it would be if there would be a way to put the sound output of Amarok (or anything else, maybe line-in or microphone) through some effects that would make it sound like being read from a vintage vinyl disk. Or when listening atmospheric folk songs about forests, it would be really cool to add some echo or reverberation, so it would sound like a large forest, ooor... But you get the idea. Is there any nice way of putting Amarok's sound through JACK, and from then on through a sound effector?
View 1 Replies View RelatedNormally i use "arecord" to capture and dump in a file (.wav). If i want to play the file then i use "aplay". But, is it possible that, insted of capturing to a file and then playing the file offline, if i want to play it realtime
View 1 Replies View RelatedI am trying to install vmware server on CentOS: In vmware installation guide it says before intalling:
Before you begin, read the following notes and make adjustments to your host system: The realtime clock function must be compiled in your Linux kernel. The parallel port PCstyle hardware option (CONFIG_PARPORT_PC) must be built and loaded as a kernel module (that is, it must be set to m when the kernel is compiled).
I have been using parts of the MRG (kernel-rt, qpid[dc]) package for some time; thanks to Johnny Hughes (hughesjr) for providing the initial binaries. Recently, I discovered that CERN builds MRG for their ScientificLinux distribution, which is a derivative of CentOS.
You can view the package list from their repoview or browse all the packages they support here. I have found these packages to be compatible w/ CentOS. Perhaps something can be done to leverage this work to make MRG available as part of CentOS?It's straight forward to setup a .repo file to pull MRG directly via yum, including updates.
How can I start a program from tty1 console text mode to be executed in tty2 console text mode? Actualy I would like to start a program (chat client cli program) in tty8 automaticaly when linux PC boots.
View 6 Replies View RelatedI can be granted permission, and I'm in the proper groups, but pulseaudio tells me I can't get permission.. I wanted to see if anybody else had this problem / knew of a solution / isolate whether it is a pulseaudio, policykit, whatever problem, before I post a bug upstream.
Code:
[Sun 07:25 AM] ~ $ rpm -qi pulseaudio | awk '/Version|Release/ {print $1$2$3}'
Version:0.9.13
Release:3.4
[Sun 07:25 AM] ~ $ groups
[Code].....
I just installed Maverick Studio on a new hard drive, and am using an NVIDIA GeForce 7300 LE GPU. If I boot into the 2.6.35-22-generic kernel, everything runs fine, but if I try to boot into either the 2.6.35-20-Low Latency, or 2.6.33-29-Realtime kernels (installed from Synaptic), the computer boots straight to a command prompt instead of the desktop. Does anybody know what causes this? I need to be able to use one of these kernels for doing music production.
View 1 Replies View RelatedI am striving to setup OSSEC to monitor some specific files for realtime changes! Is this possible? I can't really find a lot of info from their Documentation
Some Examples:
/etc/myfile.txt is deleted. I need this to be reported.
/etc/myfile.txt is created again so I need this to be reported again!
This has to happen instantly though, because the file might be deleted and created again many times in a short period of time.. Another one...
/etc/passwd is touched (accessed) even if there is no changes! Can this be reported as well?