system:
Opensuse 11.1 with custom kernel from Kernelorg and KDE3.5
Code:
uname -a
Linux linux-2c5j 3.0.4-41-desktop #1 SMP PREEMPT Sun Sep 4 18:51:01 CEST 2011 i686 i686 i386 GNU/Linux
The device is correctly visible:
Code:
lsusb
Bus 002 Device 003: ID 05c6:9204 Qualcomm, Inc.
Bus 002 Device 002: ID 8087:0020
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 046d:c012 Logitech, Inc. Mouseman Dual Optical
[Code].....
The modem responds with O.K if interrogated in kppp but the response on AT are not there. It does not dial. The modem has been installed as dev/tty/USB0I did compile Gobi loader 0.7 and it did run make and make install without error. The gobi rules are correctly installed and I did copy the firmware in the respective directory. The problem is: did I copy the right firmware? Is there some other problem. How can I diagnose if the firmware is the correct one (I unpacked the windows ones on a windows machine and there are 6)? I do not see usb0 offered by networkmanager (the network traffic is regulated through networkmanager).
How can I set the outgoing port for the socket? In wireshark, my outgoing port is 1024, and i want to set it to 6800 (or a similar port) I see the outgoing broadcast-message in wireshark, but no answer. There are three ECU's in the LAN, which should answer. The following code is a mixture of C/C++ and jointed from different articles:
[code]...
In wireshark I can only see the outgoing message. But the "recvBuffer" (in the lower part of the code) contains the same content as the sendBuffer. Is it right, that I need a sender and further more a receiver? Or should I receive the broadcast-answer on the same socket on which I send the bc?
When I try to connect to my PC with sftp, the connection closes right away. Connect with ssh works flawlessly, and so does fish:// ! I run openSUSE 11.1
I've been googling around and can't seem to find my answer. I've got an old ATI 9700 pro that I'm removing from my system. I'm replacing it with an Nvidia GeForce 6200. What do I need to do to switch these in Karmic? I tried switching the cards, but I only get a white screen with the pointer on the new card. I can't do anything else. I'm guessing I have to uninstall the open source ATI driver first. How do I do that?
When I connect to ssh server ( server running Redhat ) from debian it takes a long time to give me the prompt, while I receive the prompt rapidly when I connect from slackware or solaris?
I've done a bit of googling, but can't find a clear answer on this. If I format a USB drive using NTFS, so I can store copies of files from my Win 7 machine and my Lucid machine, will it work.
My test box is running 9.10 desktop,bind,dhcp,LAMP. Everything is working good, except for one thing. How do I configure the DNS to answer the IP of eth3 (192.168.0.2), no matter what the client asked for? If you ask my DNS for google.com, I want it to return 192.168.0.2. I know this can't be that hard, I just can''t figure it out.
I wanted to know how can I make fsck automatically fix HDD errors when it needs to check HDD during boot up and do not ask user for it . I found some of fsck related scripts in /etc/init/ and /etc/init.d/ but I don't know what to do with them.
I am having issues getting the modem it the dial-in server I have set up to answer on the correct ring. I have the /etc/inittab set:
Code: S1:2345:respawn:/sbin/mgetty -n 7 -x 6 -D ttyS2 yet I have to play with 'init q' and minicom to get it to answer on ring 7. Then a reboot destroys the setting and I have to go through the whole hassle again and it goes back to answering on the first ring.
This is not acceptable. This dial-in server is only a very back door into my network. It is only turned on when needed. Most of the time it is not powered up. When it is turned on it is by a non-tech person with out the ability to jump through the hoops to get it to answer on the correct ring.
Ideally I want this modem to just listen to the line after it stops ringing to check for a data signal and if it does not find it just hang up. If it finds a data signal then establish a connection and all that. That way it does not interfere with answering machine on the line. Google has yielded very little info about setting up dial-in servers. Modems are not used very much any more.
i m using atoi() to convert char value to int. and then passing that int as a swtich variable.switch goes in a case and exectuing that particualr function but returning 0 value....for example: i am finding no of process() and system up time().when switch program goes in system up time it gives right values means correct no of days, hrs , min and sec but when it goes in no of process() it gives 0 answer.
I put my skype chat on another workspace so I can focus on my school work and I have two windows on my first workspace so that i can alt tab easily but every time someone talks on skype it comes to my first work space and ruins my alt-tabbing comfort. How do I make it stay in its workspace and leave me alone? I rather something in the taskbar blink or if that's not possible, I just want no blinking at all. This is frustrating me since I need my laptop for my homework.
I am trying to write little quiz to give different answer when given yes or no reply, however I got stuck with this. I am very very new to Python so please have patience. Can someone give me a sugesstions?
This is my code so far: name = raw_input(" What is your name") print " Hello, " + name + "."
Code: tupe=("File",("Open","Open a file"),"Edit",("Cut","Cut a file"),("Paste","Paste a file"),"About",("About","About the program")) menutitle="" menupos=0 for items in tupe: if type(items)==str:
[Code]...
I'm trying to understand how to make "File" be the parent information for "Open","Open a file" and "Edit" to be the parent of "Cut, Cut a file" and "Paste", "paste a file". Does anyone have a suggestion for accessing the a nested tuple in this manner? The above code does not quite do what I want it to. The above code is for visual purposes, but I'm learning how to refactor for wx.python.
My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
I'm trying to create an SSL certificate and answer the questions inside a bash script. The command used to create the SSL certificate
Code: openssl req $@ -new -x509 -days 365 -nodes -out /etc/apache2/apache.pem -keyout /etc/apache2/apache.pem The first question asked is. Country Name (2 letter code) [AU]:
Im a bit stuck with a simple script that im practicing with... im trying to get my head around some simple scripting. Basically i want to write a script that will work as below: It will ask the user to enter their userid. If its correct it will say 'Correct' If its the wrong id (But the ID exists in /etc/passwd) then it will say 'incorrect' If its not a valid userid it will say 'doesnt exist'. What i have so far is:
[Code]...
# If the user enters their own userid they will get a comment saying 'correct' $LOGNAME) echo "Correct";;
# If they enter another users ID (That exists in the /etc/passwd), then they get a message to say 'incorrect userid used'. Im not sure what i need to do here to get it to check the /etc/passwd to see if the input exists in there.... im guessing some kind of simple 'if' statement to say ---- "if 'input' exists in /etc/passwd then echo "incorrect userid used"
# If its entered incorrectly and not a valid ID then they will get this comment. Again, im guessing this part would be similar to te above option..... *) echo "not a valid ID";;
Ive managed to work out how the basic Case staements work, but to add a conditional statement based on the input, i just cant figure out. I have tried looking on google, and found some help but it doesnt really explain how i check the input against the /etc/passwd.
How can I add a network card to Network Manager? I have installed a new usb dongle and iwconfig shows it, ifconfig -a shows it and iwlist shows my SSID. Network manager just does not list it. A side note: It is weird if I use my old bulky Zonet (rt2870sta) on reboot it is wlan0 but if I plug in my new Edimax (rt3070sta) it will not show up unless I reboot with it and only it plugged in. Then I can plug in my Zonet again and they show up as ra0 and ra1.
I have a problem in my shell script. I try to control an installation.During the installation there are a few questions which have to be answered.Like: "Enter your Choice [1-3]: "I want do something like this:
--> It's my first script <-- #!/bin/bash echo "--> Install packages <--"
The last few bugs I have reported on launchpad have met the response "submit it upstream". What's the point of submitting bugs on launchpad if the bug has to be reported again upstream anyway? Why not just report upstream in the first place and forget launchpad?
It seems like unnecessary duplication of effort. So can anyone give me some genuine reasons to bother reporting in launchpad?
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error: