OpenSUSE Wireless :: Cannot Connect To AP - Cant Get Wireless To Work
Jun 22, 2010
Suse on an (old even) laptop is even more fun that it is on a desktop. BUT, I still cant get my wireless to work! I have the Encore ENUWI-N3 USB adaptor. Suse sucessfully detects my USB device, recognize its a Wireless lan network adapter, installs it as such (gives it its driver) and adds my wireless menu under network manager. (it gives it the rt2x00) I can enable / disable the USB device from there (its light corroborates that.
So all in all, suse installs my wireless. But I CANNOT find any AP when I scan. Under the "scan" tool (under connec to wireless > A wireless network ect ect) I find no APs. Adding the SSID of the AP manually is of no help either. And the command sudo /usr/sbin/iwlist scan merely gives - "wlan1 Scan completed" and nothing else. Check ifconfig - not a frame sent/received.
I recently got a lenovo w510 laptop and I installed openSUSE 11.3 KDE on it. the wireless works fine at home (802.11g WPA2) when I go to work I have tried to set up the wifi for the 802.1X PEAP network but it doesn't look like it even tries to connect.
The work network set up is as follows. non-brodcasting SSID (do I need to tell network manager of this? I manually enter the SSID no problem)
Dynamic WEP 802.1X PEAP blank anonymous identity no CA cert (I suspect this might be the problem) PEAP v 1 MSCHAPv2
I have verified my username and pw several times, as well as the SSID. Just yesterday I helped a co-worker get on the network under ubuntu and it worked like a charm.
The Hardware profile displays the wifi card as a "WiFi Link 6000 Series" It is an intel card.
at start, knetworkmanager detect wireless network, but doesn't automatically connect - I have to restart it to make it work properly. Instead, it gives that error:
On Opensuse 11.2, I would like to connect my ipod touch to a wireless ad-hoc network of my laptop. I have no wireless WIFI-router at home, so I have to use the laptop as a router to the internet. I know I have to enter a static IP adres and my router's address, but where ? I haven't found any place under network tools to do this, only saw some fields with SSID's and MAC addresses to fill in.
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
I just upgraded and then re-downgraded kde and wireless has stopped connecting (it still seems to be working, just not the way it should). Here's some info:
I can connect to my wireless router while logged in as root, but not under my user account. I went into YAST and the user maintenance area and gave myself every permission (Add, Edit, Delete Users or Accounts), but kde network maanger will not allow me to connect to my router.
I'm moving from other distros. and I'm currently loving openSUSE and I'm probably going to stick with it for a long time.I have already googled for this, but I found no solution, but I figured this should be a common problem... Does google searches inside this forum?Now... for my problem, whenever I hibernate (suspend to disk) or sleep (suspend to ram) I can't resume my wireless connection nor connect to another.I don't know if this is an issue if I use cables, because I simply don't with my netbook:The hardware in question is an ASUS 1005HA eee pc, running openSUSE version is 11.3 fully updated. Didn't mess with wireless connections, nor kernel or hibernate settings
I have loaded the latest version of opensuse and I have everything working but I cannot connect to my wireless WPA2 network. I have downloaded the bcm43xx firmware using the method /usr/sbin/install_bcm43xx_firmware I then restarted the network. The computer will now read the network card and will find networks but I cannot get it to connect at all. At first it would connect using ifup in yast but would disconnect after a few seconds. It would never connect through NM. I have a usb network card that works just fine. I am lost as to how to fix this problem.
I recently bought Dell Studio 15 laptop, installed OpenSUSE11.2/64 in addition to Win7 64 bit. I am trying to connect it to my wireless network at home and at work, but without much luck.
1)Found out that Dell 1520 WLAN adapter has Broadcom 4353 chipset. 2)saw that b43-fwcutter installed 3)installed broadcom-wl and broadcom-wl-kmp-desktop
After that can see many wireless Access Points at home,selected one via NetworkManager (eth1), configured it (incl. security same as in Win7), it goes from Activating to Active, but I still can not connect - I mean, in the FireFox - "page not found"
One of the biggest issues i have at the moment is that my network based plasmoids on my KDE desktop load before my wireless network connection is established, so i'm thinking it would be best to start up the wireless connection at boot time. On previous distro's, I did this with netcfg but I can't seem to figure out how to do so in OpenSUSE 11.2. Is this the best way to manage this issue or is it possible to set a delay before the plasmoids load up?
I read the thread about the b43-tools but the git command on there fails.
git clone [URL] Initialized empty Git repository in /sbin/b43-tools/.git/ fatal: [URL] not found: did you run git update-server-info on the server? I am assuming the server is them not me? I have installed the firmware per my dmeg request. And the firmware is installed correctly.
[Code]....
The card works it just will not connect. I think I have that rev 3 issue where I need to edit the SPROM but I can not seem to get the b43-tools installed.
My wireless is a libertas 88w8335. Suse 11.4 just installed. For this one, I need a windows driver with ndiswrapper. ndiswrapper is installed, and the driver as well.
I can see my networks with iwlist scan my network is set up in yast with ifup (I can scan the networks and find mine), but I cannot connect to my Acces point : there is no SSID with iwconfig.
Sorry for repeating the same old complaint but there doesn't seem to be a common fix: Wireless does not work on my Presario R3000 although SUSE 11.x lists the hardware in the Hardware Information list and the hardware is turned on. Network Manager doesn't display any wireless networks in SUSE while Win 7 can see 4 of them on the same machine. Ubuntu has no problem either
i've installed openSUSE 11.2/KDE. Installation process finishes with fun. The first thing that i wanted in my laptop don't work. That's wireless internet. I've google and google. saw many thereds in openSUSE forms and check what i understand after reading thereds. Finally what i understand is i've to install firmware. I've downloaded the b43-fwcutter and broadcom-wl-4.178.10.4.tar. Installed b43-fwcutter. and copy broadcom-wl-4.178.10.4.tar. in to root. by using
I installed opensuse 11.3 succesfully on my acer aspire 5670 (5672) laptop. Everything works except wireless connection. Looking for a solution is follewed the " My wireless doesn't work - a primer on what I should do next" guide on this forum. These are the results i become: (2) Determine what device you have.: 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
I think I need wireless App. Its really frustrated to get wireless to work. I always a window user since window 3.1 came out. I am trying to learn new OS, but only to get stuck on getting my wireless to connect. Maybe I am not cutting out to be linux user?
I've just upgraded from openSUSE 11.2 to 11.3. In 11.2 everything worked fine: I've booted my laptop, logged in and turn my wireless card on using the hardware wireless button, the KDE Wallet opened up, I inserted the password and voil�, wireless connection was on.But after upgrading from 11.3, it doesn't work like that anymore. I need to have the hardware wireless button pressed to on during boot, otherwise Network Manager will not work. And yes, I do check the "Enabled wireless" option, but it doesn't work. When I tried to check it out, I found out that the wireless "Scan" button that scans and displays the available wireless connections shows nothing.So, if I forget to put the wireless on for boot, I must restart and put it on. I've tried log off and log on, and restarting some network services, but neither worked.I have an Intel Corporation PRO/Wireless 2200BG, as showed below, and I'm posting this message using it.
Result of /sbin/lspci:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) 00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 04)
I just can't get my wireless to work so I can get started with learning Linux. Here is a bit info about my setup, I have tried it both ifup and Network Manager version 0.8.2-15.20
I can't connect to any wireless network although my drivers seems to be working fine. I think it's somehow related to "Network connections" manager. Please see attached image.
My current wired network (eth0) works fine I can ping google.com or browse Internet.
My first problem is that when I open KNetworkManager the wireless tab is desibled,I don't know why! My laptop is HP pavilion dv6-1245DX. How to get connected to my wireless router?
I have just setup Ubuntu on my Dell Laptop a Lattitude C640 with a 3Com 3c905C Tornado Wifi Card. Well the wired and wireless do not work. They try to connect then bang no connection. I would be able to make some headway I think but I have no basic skills with Ubuntu. I have mastered how to get info from the terminal but how the heck to you edit a file? How do you get to that stage?
Currently I'm having trouble connecting to the guest wireless network at my work. I've read through a couple threads that seem similar to my problem. I tried going through the terminal window and following the instructions that was offered to others. I'm just wondering if my hardware is different, if I need drivers, if my permissions aren't correct.
1. I recently received a Sony Vaio laptop model # VGN-FE770G from a friend, and I'm enjoying running Ubuntu.
2. I followed another thread that suggested to change some lines in /etc/network/interfaces, but I don't have permission to edit this file. I don't really have the need to set up multiple users on my laptop, so how can I change my permissions to root? (Or is it a good idea even?) Should I log in as root?
3. How can I set my laptop up to be flexible with network selections, using hardware: (built-in camera and microphone for example), and useful applications?
Wireless card detected but cannot connect to a wireless network
I have install it suse 11, and everything went well until the wireless thing is not working, my card is Broadcom BCM4318, I see my card on the network settings but I cannot configure the card, and also I cannot connect to a wireless network, can someone tell me what to do here, I am loosing my patient....
