OpenSUSE :: SeaMonkey Crashes Computer On ABCGo Website?
Jan 22, 2011
When using SeaMonkey to view the following website, the whole computer "crashes". It crashes in the sense that it no longer accepts input(via keyboard and mouse), and the screensaver does not activate when the laptop screen is closed. The screen does not go black and the Caps Lock key does not flash as in a kernel panic. This is the only time in my entire lifetime of Linux that an application actually crashes the system and has effects similar to that of a kernel panic.
This is the website:No Ordinary Detention Full Episode - No Ordinary Family - ABCThe video plays for some time, but after a while the computer just stops responding to input and the video(unfortunately) stops playing.Unfortunately, I can not say much looking from the kernel log(/bin/dmesg), because each time I restart my computer, it is erased. Also, I checked the System Log(/var/log/messages), and nothing seemed out of the ordinary.I watched a previous episode of the show on the same website using Opera, and all fared well. However, what could be the problem with watching it using SeaMonkey?openSUSE 11.3 64-bitSeaMonkey 2.0.11Adobe Flash 10(10,0,45,2)KDE 4.5.5X.Org X Server 1.8.0
View 9 Replies
ADVERTISEMENT
Sep 17, 2009
Trying to put some java stuff on my website, well intranet first to test them. What do I need got java 6 jdk and java 6 plugin. Java script is turned on. No joy on ubuntu jaunty.
View 6 Replies
View Related
May 20, 2011
This problem started a few days ago. Whenever I attempt to connect to a wireless connection via network manager, my computer completely crashes, going to a black screen with no input from keyboard or mouse. It forces me to reboot using the power switch. Everything works fine when I connect to an ethernet cable, so I am sure it's a problem with my wireless driver.
I already tried (successfully) reinstalling the ath9k driver via compat wireless as was the advice from other forums, but this had no effect. I'm currently running opensuse 11.4, and haven't had this problem until a few days ago
This problem seems a bit ridiculous for a task as simple as connecting to a wireless network, so I'm convinced that either there is some sort of relatively simple way of fixing it, or windows really is the only decent operating system out there..
View 9 Replies
View Related
Oct 19, 2010
I have a strange problem with my browser(s), even Epiphany....when I go to my music site [URL] then log in, go to my page and click on link to play a song the browser Crashes. It never did this before and I dont know what I could have done to cause this. It only does this on this website. Could it be that they use a Quicktime plugin to play the music? I don't know cause I used to be able to play music on there before. It doesnt do this on my Reverbnation site page, just Icompositions. If I click on the icon to restart browser a box comes up saying "we're sorry"...your browser crashed for no apparent reason.....and offers a choice to either reload the page (that repeatedly crashes) or start new session. It isn't a big deal but this never used to happen before. Could it be some bad code on that website?
View 1 Replies
View Related
Mar 18, 2010
I'm Dual-booting XP with Ubuntu Karmic Koala, heres my other specs:
CPU: Intel Pentium D 3.0Ghz family(15) model(4) stepping(4)
GFX: Geforce 7800 GT (had problems with GFX when I first installed Ubuntu, I had to update my drivers)
2 GB RAM
This is a nearly fresh install of Karmic Koala, I've only installed whatever updates I needed, graphics card drivers, KPlayer, and Google Chrome. Because I prefer Chrome over Firefox I immediately went to download Chrome, and Firefox would get to the Chrome page and then crash. I then got the Chrome install file from another computer and installed it. Chrome will not even launch, so I go to search the problem in Firefox and it crashes on ANY link I click in Google Search. I also tried to directly type websites into the URL box: it loads the pages title (Ex. "Yahoo! Mail"), and crashes before displaying the page at all.
This is a very odd problem to me as I used the same disc to install dual-boot with Win7 and Ubuntu on my laptop which works perfectly, and now this happens to my desktop.
View 6 Replies
View Related
Aug 26, 2010
i am running RHEL 5.1 with mozilla firefox 3.6.8 and default runlevel is 5. The problem is whenever i am visiting facebook.com or some regional websites (url) my X server crashes and its taking me to the login screen. while visiting, its displaying some unwanted images across the screen. please look at the attachment
VGA controller is
[Code]...
View 7 Replies
View Related
Apr 22, 2011
I've just updated my system from SuSE 11.2 to 11.4 (I'm using KDE desktop environment) I like to install SeaMonkey myself. I use the installer from the Mozilla site. When I try to run SeaMonkey, this is what happens:
Code:
./seamonkey-bin: error while loading shared libraries: libdbus-glib-1.so.2: cannot open shared object file: No such file or directory
Where do I get the missing library? I've tried searching for it on the rpmpbone site RPM Search and even they couldn't find it.
View 4 Replies
View Related
Jun 28, 2011
I just updated Java and when I checked in my plugins for SeaMonkey, Java is not listed, not even IcedTea. When I looked at FireFox's plugins, the only Java listed was IcedTea.
How can I get SeaMonkey to know that Java is installed? I looked for the 32 bit Java from within YaST but saw none, just the 64 bit.
Anyway, these are the java's installed:
I'm running SuSE 11.4 and my browser of choice is SeaMonkey 2.0.14.
This is a list of my ~/.mozilla/plugins folder:
Code:
View 9 Replies
View Related
Jul 23, 2011
How can I upgrade seamonkey 2.0.14 to 2.2 in terminal opensuse 11.4?
View 5 Replies
View Related
Jun 25, 2010
I just wanted to know which Browser would work better with Java, Flash etc. I've heard good reports that SeaMonkey has alot more to offer, but firefox is more..."nice"
View 5 Replies
View Related
Feb 17, 2011
1- How can I prepare my own website in my own pc at home? I have had used Nvu in the past, but it looked to me very unstable (it disappeared from my screen at simple use, despite re-installing it again and again), and I think the Kompozer was also not very far from it, my experience.
2- How can I prepare my pc to run that website? What Linux software I need to download for? Do I really need to have a great cash to transform my poor pc into it? I think that because it is Linux-Ubuntu, not Windows, the situation can not be any worst or more expensive... uh?
3- In theory, if I have that website in my own pc... how I know that hackers can only see my page (in a separate-isolated folder from other folders, right?) and can not take a tour of my entire pc, documents, photos, etc, including copying or stealing archives or Ooo documents? It is not that the same way when (by example) a hacker can steal the next Stephen King book or script and sell/display it worldwide without even his knowledge?
View 5 Replies
View Related
Oct 2, 2010
Imagine my surprise when, after accepting the proposed upgrades posted for OS 11.1 today, that my SeaMonkey email client shows NO messages from Sept. 2010 in any account, sent or received.
More info: Upon checking for messages, an unusually large number were seem to download (POP server) but few appeared in the in boxes. Old messages from August appeared for the first time.
View 4 Replies
View Related
Jun 12, 2011
Today I did the Seamonkey 2.1 update. I found out that some of the add-ons or extensions did not work. They were disabled, due to incompatible versions. I found out a simple solution. I hope this helps some. This helped me with the Webdeveloper, fxif and Novell Moonlight extensions. In the file install.rdf is an element called MaxVersion. Change this to 2.1.* and the extensions work again.
The file install.rdf is to be found in ~/.mozilla/seamonkey/user-thingies.default/extensions/{extensioncode}
The changed code for Moonlight looks like this:
Code:
<Description>
<em:id>{92650c4d-4b8e-4d2a-b7eb-24ecf4f6b63a}</em:id>
<em:minVersion>2.0b1</em:minVersion>
<em:maxVersion>2.1.*</em:maxVersion>
</Description>
Good luck if you are a Seamonkey user.
View 6 Replies
View Related
Aug 17, 2010
openSuSE gurus, after several weeks I've finally managed to get aMule to listen external calls from Mozilla browsers. To make it quick: In Seamonkey or FF do about:config and add
Code:
Key: network.protocol-handler.external.ed2k
Tyoe: boolean
Value: true
Key: network.protocol-handler.expose.ed2k
Type: boolean
Value: false
[Code]...
View 3 Replies
View Related
May 6, 2010
So I forgot how to do something in Compiz and I quickly Googled it to find the answer. On the first or second link I clicked, a pop-up box opened from Firefox saying that I should scan my computer. Immediately, I pressed the X button, but a page started to load that tried to "scan" my computer. I closed out Firefox and re-opened it. I did the exact same search again on Google, but I clicked on the cached view of the site. It was harmless enough--a blog with some ads on the side of the page. I'm assuming that it was one of the ads that somehow must have taken over the page.
Anyway, I know that the discussion of anti-virus programs is not anything new, but I would like to know if this virus may have affected Ubuntu. What would you guys recommend in this case?Also, after running the update manager, I received a pop-up box asking if I would like to update Grub. Is this a normal part of the update, or could it be a virus? I'm a bit paranoid, being from the land of Windows.
View 6 Replies
View Related
Aug 29, 2010
I absoultely cannot figure this out... No matter which browser (FireFox, FireFox4, Seamonkey, etc) I try to use, I always get this error message:
Replace "seamonkey" with whichever browser stated previously.
View 9 Replies
View Related
Apr 13, 2010
Whenever I try to start up using a liveCD on my computer, it crashes on me and dumps the call trace to me. This happens both on Ubuntu and Kubuntu 10.04 with similar results. I am using a Gateway(tm) GT5408 machine with a default Intel(R) BIOS built-in. At first, the booting screen shows up and seems to load, but then I find that it took too long. Whenever I pressed an arrow key, it showed a bunch of text. Most of it was talking about memory, and from what I've read, it seems like I have a bad BIOS, but I'll let other people decide on that issue. The call trace is as listed below:
Code:
- WARNING: at /build/buildd/linux-2.6.32/arch/x86/kernel/check.c: 134 check_for_bios_corruption+0xcb/0xe0()
- Hardware name: T5088
- Memory Corruption detected in low memory
- Modules linked in: sqashfs aufs nls_cp437 isofs dm_raid45 xor fbcon titleblit font bitblit softcursor vga16fb vgastate usbhid hid nouveau tta drm_kms_helper drm usb_storage e100 mii intel_agp: 2c_algo_bit agpart
- Pid: 9, Comm: events/0 Tainted: G D 2.6.32-19-generic #28-Ubuntu
- Call trace:
[<c014c342>] warn_slowpath_common+0x72/0xa0
[<c012a9bb>] ? check_for_bios_corruption+0xcb/0xe0
[<c012a9bb>] ? check_for_bios_corruption+0xcb/0xe0
[<c014c3bb>] warn_slowpath_fmt+0x2b/0x30
[<c012a9bb>] check_for_bios_corruption+0xcb/0xe0
[<c012a9dd>] check_corruption+0xd/0x30
[<c016360e>] run_workqueue+0x8e/0x150
[<c012a9d0>] ? check_corrupt+0x0/0x30
[<c0163754>] worker_thread+0x84/0xe0
[<c01676b0>] ? autoremove_wake_function+0x0/0x50
[<c01636d0>] ? worker_thread+0x0/0xe0
[<c0167424>] kthread+0x74/0x80
[<c01673b0>] ? kthread+0x0/0x80
[<c0104087>] kernel_thread_helper+0x7/0x10
---[ end trace 5341fe8e1ae197b2 ]---
View 3 Replies
View Related
May 25, 2010
So whenever I turn on my EeePC with Ubuntu 10.04 on it, the network crashes after like 10 minutes to 45 minutes. Every time. Of course I have that horribly <snip> bug where the WPA and even WEP on my laptop are buggy because of 10.04, but it did the same when I was on 9.10 (but like 3-4 times a day instead of many times an hour).
Yeah, so when I connect to the network with my laptop, the network crashes. The wifi still works, I can detect the wireless network on all my computers (my Ubuntu one, Windows 7 and my girlfriend's Mac), but internet does not work. I then have to turn off router/modem, and it starts to work again. Then, a couple of minutes later, if the Ubuntu laptop is on, it stops again.
That's annoying because I can't really use my laptop on the internet because I'll have to restart everything soon. I've tried setting to WPA and to WEP and it happens with both. Same goes if I set my laptop to a manual IP address or an automatic one. I did some tests to be sure, and the network works without crashing for days if my laptop is closed, so the problem really is with Ubuntu, and as I said, it kind of always did that, but it was tolerable before.
View 3 Replies
View Related
May 31, 2010
I have a Lenovo T400 and I upgraded from 9.10 to 10.04. After the upgrade I am not able anymore to start ubuntu.
I get the Grub boot manager. After that I only see the a black screen and sometimes a few pixels.
I tried already to remove 'quite' and 'splash' in the boot options. And I added 'nomodset' and 'fb=false'.
View 3 Replies
View Related
Jun 14, 2010
We've had a very big problem with our computer chrashing for a while, and I'm not sure if it's Linux Ubuntu that's the problem or not be we'd like some feedback from the experts of this forum. I hope I'm posting this in the right place. So, a while back we had Windows XP on our machine, and it had been running well (as well as XP is capable anyway, ), but for some reason it wouldn't boot XP properly and would only allow us to open it in Safe Mode.
We opened up the computer to take the memory chips out and back in, just in case that would help, and the inside was terribly dusty. Also, we have a loose heatsink, and the chip underneath is filled with dust. Not sure what the chip is I'll try to get some picture of it pretty soon. Anyway, the inside of the machine obviously wasn't too good.
So, we installed Linux Ubuntu LTS 10.04 on it from a CD to try to fix the booting problem, and this worked -- but now, our computer crashes constantly after turning on. It crashes whatever we're doing -- we can do something light, like Google Chrome, or something heavy, like video editing, and have it crash on us. So it doesn't seem to be a problem with the programs or anything -- I'm guessing it's either an issue with the computer itself or an error with the operating system. Sometimes we're lucky and can be on the computer for half-hour to and hour and a half, but it's still really bothersome, and will get in the way of any projects that require saving or recording. I'd guess it crashes around 10-20 times a day.
I included a video of it crashing and what it does just in case that could be of any help. Link: [URL]... The screen goes blank for a moment -- shows oddly colored, fragmented bars in the center of the screen (sometimes red, sometimes silver), shows this text:
Code:
* Speech-dispatcher configured for user sessions
* Starting the Winbind daemo
winbind [ OK
* Starting Common Unix Printing System: cupsd [ OK
* PulseAudio configured for per-user sessions
[Code]...
View 9 Replies
View Related
Sep 1, 2011
As the title says, running folding@home always crashes Ubuntu when it gets to working the steps. This occurs when using the smp flag on the client. I tried removing smp and it worked, however it is slow and i can't take advantage of all 4 of my cores. My hardware specs are in my sig. At first i though it could be the memory, but after running memtest i get no errors. This does not occur on windows vista, however that is 32bit not 64bit
View 9 Replies
View Related
Aug 11, 2009
My Fedora 11 installation was a breeze but i have been experiencing crashes sometimes. the computer hangs and i have to do a hard reset.
Here is what /var/log/messages say before the crash:
View 5 Replies
View Related
Jan 30, 2010
I've installed Fedora 12 64bit, but the computer crashes while booting, basically after the irqbalance or rpcbind steps.
Here are photos of the error messages:
Here are my hardware specs:
MB: Biostar TF560 A2+
CPU: AMD Athlon 64 X2 Dual Core 5000+
RAM: DDR2 800 Dual 128 bit, 2T (4GB)
GPU: ATI Radeon HD 3870
The sound and network cards are integrated but I've tried disabling them from BIOS and the problem persists.
Note that I've tried Ubuntu (32bit and 64bit) and it also crashes about 30 seconds after loading the graphical interface (either installer or login screen). Fedora's graphical installer worked flawlessly, tho. I've also tried SLAX (using it right now) and it works without any problems.
View 5 Replies
View Related
Feb 22, 2010
I am using an HP dv6 series laptop. The wireless works fine in Ubuntu 9.10 (must install the Broadcom STA wireless driver). When I try to use Kubuntu 9.10 my computer crashes when I try to install the driver. Is there any particular reason why it works in one and not the other?
View 6 Replies
View Related
Apr 28, 2011
Like the title states my computer will crash when running fullscreen games and Unigine heaven 2.5 on 1920x1080. I'm using 10.10 64 bit os. I'm fairly new to Linux.
In windowed mode it runs fairly well without crashing.
I would really love to run crysis on this at some point(if you know how let me know)
My system is comprised of the following hardware...
asus M4a78lt-m MB
2 x WD Caviar Blue 500GB HDD in RAID 0
AMD X2 Athlon 3.2ghz Regor (OC'd stable at 3.75ghz)
8GB Ripjaws 1600mhz and 2GB 1333mhz super talent memory = 10gb @ 1333
Nvidia GTX460 SE 1G running a single Acer X203H 1600x900 (270.41.03 Driver)
Dual 480W PSU's
One dvd-rom
View 1 Replies
View Related
Apr 16, 2011
I use openSuSE 11.4 with semonkey Version 2.0.13 andsmplayer Version 0.6.9. I tried to play a .mpg file by using
the "Helper Application" smplayer. But nothing happens, onlythe following hint was put on the screen: "Use Enqueue in
View 3 Replies
View Related
Mar 23, 2010
I need to copy over my friend's asp website. I just installed the mono module.But I have no idea how to use it. I found a website that directed me to do the following within httpd.conf:
[Code]...
View 3 Replies
View Related
May 19, 2010
Is it possible to download media from any website? An option of converting between formats and between video to audio is also helpful.
View 7 Replies
View Related
Sep 20, 2010
Is it possible to develop my websites locally before uploading them to my host? I need PHP and MYSQL. I'd like to have basically http access to my websites locally on my hard disk but restrict access to only me. No access outside of this machine. How to do this?
View 9 Replies
View Related
Mar 9, 2010
I've grown accustomed to using konqueror, and i like it's speed. Firefox on kde is slightly sluggish and consumes much more memory.If i type a website address in konqueror, for example, Google, it comes up with an error message. It expects me to put in Google.Is there any way to make this default in konqueror? For example, in firefox i just type in google or Google.
View 9 Replies
View Related
