Ubuntu :: 10.04 Startup Crashes Using LiveCD On Computer
Apr 13, 2010
Whenever I try to start up using a liveCD on my computer, it crashes on me and dumps the call trace to me. This happens both on Ubuntu and Kubuntu 10.04 with similar results. I am using a Gateway(tm) GT5408 machine with a default Intel(R) BIOS built-in. At first, the booting screen shows up and seems to load, but then I find that it took too long. Whenever I pressed an arrow key, it showed a bunch of text. Most of it was talking about memory, and from what I've read, it seems like I have a bad BIOS, but I'll let other people decide on that issue. The call trace is as listed below:
Code:
- WARNING: at /build/buildd/linux-2.6.32/arch/x86/kernel/check.c: 134 check_for_bios_corruption+0xcb/0xe0()
- Hardware name: T5088
- Memory Corruption detected in low memory
- Modules linked in: sqashfs aufs nls_cp437 isofs dm_raid45 xor fbcon titleblit font bitblit softcursor vga16fb vgastate usbhid hid nouveau tta drm_kms_helper drm usb_storage e100 mii intel_agp: 2c_algo_bit agpart
- Pid: 9, Comm: events/0 Tainted: G D 2.6.32-19-generic #28-Ubuntu
- Call trace:
[<c014c342>] warn_slowpath_common+0x72/0xa0
[<c012a9bb>] ? check_for_bios_corruption+0xcb/0xe0
[<c012a9bb>] ? check_for_bios_corruption+0xcb/0xe0
[<c014c3bb>] warn_slowpath_fmt+0x2b/0x30
[<c012a9bb>] check_for_bios_corruption+0xcb/0xe0
[<c012a9dd>] check_corruption+0xd/0x30
[<c016360e>] run_workqueue+0x8e/0x150
[<c012a9d0>] ? check_corrupt+0x0/0x30
[<c0163754>] worker_thread+0x84/0xe0
[<c01676b0>] ? autoremove_wake_function+0x0/0x50
[<c01636d0>] ? worker_thread+0x0/0xe0
[<c0167424>] kthread+0x74/0x80
[<c01673b0>] ? kthread+0x0/0x80
[<c0104087>] kernel_thread_helper+0x7/0x10
---[ end trace 5341fe8e1ae197b2 ]---
View 3 Replies
ADVERTISEMENT
May 22, 2011
I can boot off of the Natty LiveCD, run it for days fine. Install, everything's smooth. Boot up and run some updates. That's where it hung the first time around. Display froze, cursor and keyboard would not respond, audio was stuck looping. This was a pain because it corrupted some stuff with apt. Any point from power-on onward is "eligible" for a crash. It seems to be random, but there also seems to be a trend of it crashing earlier on as time proceeds. This is a custom built computer, and I've tried other Linux distros like Debian and 9.04 UNR, they all crash somewhere in the install. Leaves me thinking it's a hardware fault, but why would it run perfectly fine off of CD but die when installed then?
[code]....
View 5 Replies
View Related
Dec 27, 2010
I was trying to fix gparted (it was crashing whenever it started) and then when I would type my password in the login screen, the screen would flash back and then the login screen would come back. If I logged in in a terminal and then did startx, it would just show a black screen. I figured it was broken. I made an Ubuntu 10.10 liveCD and booted it up and clicked on the installer thing and then it froze and an error thing popped up saying Parted crashed.
Essentially what I need to do is install Ubuntu without using the partition GUI.Can I try to find a thing that will let me make an empty EXT4 partition and then a thing to let me install Ubuntu to it?
View 9 Replies
View Related
May 1, 2010
I tried installing Gwibber on Ubuntu 9.10, but when I start the program, it just goes grey and requires a force-quit.Running it in the terminal produced the following errors.
Code:
/usr/lib/python2.6/dist-packages/gwibber/microblog/support/facelib.py:47: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[code]....
View 1 Replies
View Related
Oct 10, 2010
DISCLAIMER: I know I should go to the gparted forums for this question. I'm at the ubuntu forums though because I think the reason is that Ubuntu is somehow conflicting with my BackTrack linux installation; it worked fine before I installed it.Reinstalling did nothing. Trying to run from Terminal gives:
Code:
matt@Matt:~$ gparted
Inhibit all polling failed: Only uid 0 is authorized to inhibit the daemon
[code]....
View 2 Replies
View Related
Dec 6, 2010
I install Banshee 1.8 on Kubuntu 10.04 from a PPA but it will not start up now I've ran it from a terminal and this is the output
Code:
[Info 14:04:45.208] Running Banshee 1.8.0: [Ubuntu 10.04.1 LTS (linux-gnu, i486) @ 2010-09-30 23:38:39 UTC]
[Info 14:04:46.711] Starting collection of anonymous usage data
[Code].....
View 1 Replies
View Related
Jan 18, 2010
I have used a few versions of ubuntu now and each one seems to encounter the same problem loading ubuntu.
I am using a Samsung x05 laptop.
If I have a mouse, printer or even wired internet connection plugged in at any point during startup I will not be able to get past the login screen. I can login fine but the system freezes at the beige screen before the desktop appears.
I recently partitioned and installed Windows xp, which doesn't have the same problem, so I presume it is some kind of incompatibility between Ubuntu and my laptop?
View 2 Replies
View Related
Jan 28, 2010
I am using Ubuntu 9.10 and having trouble with Amarok. It crashes on on startup. I have read that the issue is not with Amarok but rather phonon. Is there a solution? Application: Amarok (amarok), signal: Segmentation fault [Current thread is 1 (Thread 0xb68cb950 (LWP 13047))]
Thread 5 (Thread 0xb527bb70 (LWP 13054)):
#0 0x003e9422 in __kernel_vsyscall ()
#1 0x07fcb142 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /lib/tls/i686/cmov/libpthread.so.0
#2 0x037168d4 in pthread_cond_timedwait () from /lib/tls/i686/cmov/libc.so.6
#3 0x075519ff in ?? () from /usr/lib/libxine.so.1
[Code]...
View 2 Replies
View Related
Jul 16, 2010
I am having some trouble with RhythmBoxt runs fine until I install the package (Synaptics) Rhythmbox plugins 0.12.8-0. After I install this package and then open RhythmBox, the applications opens for a few seconds and then closes (terminates). I get a segmentation fault.I tried reinstalling but this does not help. From previous posts, others were also obtaining segmentation faults, others had success with uninstalling the rhythmbox-ubuntuone-music-store package. I do not have this installed on my system. My problem is related with the plugins package.If I run rhythmbox from the command line in sudo mode it starts without crashing but with a warning:Rhythmbox-WARNING **: Unable to grab media player keys: Could not get owner of name 'org.gnome.SettingsDaemon': no such name But when I select one of the plugin sources it then terminates and closes down
View 6 Replies
View Related
Jul 30, 2010
The program crashes immediately after displaying the splash screen with the following error:
File "/usr/bin/ubuntu-tweak", line 109, in <module>from ubuntutweak.mainwindow import MainWindowFile "/usr/lib/python2.6/dist-packages/ubuntutweak/mainwindow.py", line 148, in <module>File "/usr/lib/python2.6/dist-packages/ubuntutweak/modules/__init__.py", line 27,
[code]...
View 3 Replies
View Related
Nov 17, 2010
Title really says all, I installed KVPNC in Ubuntu 10.10 but I can't use it. It keeps crashing on startup. Who can help me out with this?
View 6 Replies
View Related
May 12, 2011
I have upgraded from Ubuntu 10.10 64bit to 11.04 64bit. When trying to launch Firefox 4 it crashes the moment it tries to start.Here is the message I get when starting Firefox from the terminal:
Quote:
(firefox-bin:11649): LIBDBUSMENU-GTK-CRITICAL **: dbusmenu_menuitem_property_set_shortcut: assertion `gtk_accelerator_valid(key, modifier)' failed
*** NSPlugin Viewer *** WARNING: unhandled variable 18 (<unknown variable>) in NPN_GetValue()
ubuntu@arsubuntu-Aspire:~$ *** NSPlugin Viewer *** ERROR: NPN_InvalidateRect() invoke: Conex�o fechada pela outra ponta
View 3 Replies
View Related
May 1, 2010
Yesterday, I upgraded my Ubuntu system from 8.04 to 10.04. The installation process went smoothly, and the first boot of 10.04 was very smooth. However, after I selected 10.04 from my boot screen, the start-up process went very slow and then froze at a black screen. I shut it down and restarted it, only to have it load normally.
This happens on and off and I don't know why it's doing this.Does anyone have any idea what this could be or has had the same problems?
View 1 Replies
View Related
Nov 4, 2010
I've been having a bit of trouble with Nautilus for the past few days; as soon as I log in, Nautilus starts opening "Starting file manager" windows uncontrollably, and I have to 'killall nautilus' to stop it.
If I try and run nautilus from the terminal, I'm merely given the output code...
View 5 Replies
View Related
Dec 27, 2010
I'm running a dual boot Win7 and Ubuntu 10.04. I have them both partitioned on a 1TB drive and I also have 2 250gb internal hd's hooked up. So starting maybe yesterday, I was noticing that Win7 started crashing for absolutely no reason whatsoever where it freezes and the mouse and keyboard are unresponsive. Today I did a system restore because I was tinkering in the registry so I thought that could have been the issue. Crashed once since. But runs longer. I also checked the event log and doesn't divulge anything explaining the system crash.
And just now, I tried booting up Ubuntu and after grub, the purple splash screen flickers back and forth to the text based terminal startup. All I could make out once was "could not read partition table." that was really the only significant thing I could make out. It flickers too quickly for me to really catch what its saying.
View 1 Replies
View Related
May 3, 2011
I upgraded from Ubuntu 10.10 64bit to 11.04 64bit. When trying to launch Firefox from any area (launcher, menu and terminal) It crashes the moment it tries to start. This only happens in the new Unity UI. Switching back to Ubuntu Classic, Firefox runs just fine. Here is the message I get when starting Firefox from the terminal:
(firefox-bin:458: LIBDBUSMENU-GTK-CRITICAL **: dbusmenu_menuitem_property_set_shortcut: assertion `gtk_accelerator_valid(key, modifier)' failed
View 2 Replies
View Related
Mar 28, 2016
I am new to debian. I run debian on a laptop with nvidia geforce chip 740 m (optimus), it has been working great until today when i turned it on , the start screen did not show up and it went straight to terminal mode. Starting the kdm service manually does not do anything.
View 6 Replies
View Related
Jan 11, 2009
Just did a fresh install of Fedora 10 and install Banshee. The problem is it wont start. I get 'Banshee has encountered a fatal errorError details:
Code:
An unhandled exception was thrown: Could not load type 'Banshee.ServiceStack.ServiceManager' from assembly 'Banshee.Services, Version=1.4.0.0,
[code]...
View 14 Replies
View Related
Jan 22, 2010
i'm not sure myself running fed 12 kde dragon video player crashes when i try to open it.
View 1 Replies
View Related
Sep 18, 2010
Kubuntu Maverick Meerkat 10.10 says "Unable to contact KDED". This in return disables all of my KDE services. I have already freshly installed 10.10 2 times. Also when I first login it says KWIN has crashed, but I see it running in the service Manager. I have no internet service without KDE services.
View 2 Replies
View Related
Apr 24, 2011
When I am trying to start Tuxmath, it only show the initial screen for a second or two, and shuts down. From the console I get this error message:
[code]...
View 2 Replies
View Related
Apr 3, 2010
I just installed Fedora 12 on my pc and a few seconds after i boot the system, it crashes. Everything stops working.The keybord and the screen don't respond. I can move only my mouse
View 14 Replies
View Related
May 25, 2010
So whenever I turn on my EeePC with Ubuntu 10.04 on it, the network crashes after like 10 minutes to 45 minutes. Every time. Of course I have that horribly <snip> bug where the WPA and even WEP on my laptop are buggy because of 10.04, but it did the same when I was on 9.10 (but like 3-4 times a day instead of many times an hour).
Yeah, so when I connect to the network with my laptop, the network crashes. The wifi still works, I can detect the wireless network on all my computers (my Ubuntu one, Windows 7 and my girlfriend's Mac), but internet does not work. I then have to turn off router/modem, and it starts to work again. Then, a couple of minutes later, if the Ubuntu laptop is on, it stops again.
That's annoying because I can't really use my laptop on the internet because I'll have to restart everything soon. I've tried setting to WPA and to WEP and it happens with both. Same goes if I set my laptop to a manual IP address or an automatic one. I did some tests to be sure, and the network works without crashing for days if my laptop is closed, so the problem really is with Ubuntu, and as I said, it kind of always did that, but it was tolerable before.
View 3 Replies
View Related
May 31, 2010
I have a Lenovo T400 and I upgraded from 9.10 to 10.04. After the upgrade I am not able anymore to start ubuntu.
I get the Grub boot manager. After that I only see the a black screen and sometimes a few pixels.
I tried already to remove 'quite' and 'splash' in the boot options. And I added 'nomodset' and 'fb=false'.
View 3 Replies
View Related
Jun 14, 2010
We've had a very big problem with our computer chrashing for a while, and I'm not sure if it's Linux Ubuntu that's the problem or not be we'd like some feedback from the experts of this forum. I hope I'm posting this in the right place. So, a while back we had Windows XP on our machine, and it had been running well (as well as XP is capable anyway, ), but for some reason it wouldn't boot XP properly and would only allow us to open it in Safe Mode.
We opened up the computer to take the memory chips out and back in, just in case that would help, and the inside was terribly dusty. Also, we have a loose heatsink, and the chip underneath is filled with dust. Not sure what the chip is I'll try to get some picture of it pretty soon. Anyway, the inside of the machine obviously wasn't too good.
So, we installed Linux Ubuntu LTS 10.04 on it from a CD to try to fix the booting problem, and this worked -- but now, our computer crashes constantly after turning on. It crashes whatever we're doing -- we can do something light, like Google Chrome, or something heavy, like video editing, and have it crash on us. So it doesn't seem to be a problem with the programs or anything -- I'm guessing it's either an issue with the computer itself or an error with the operating system. Sometimes we're lucky and can be on the computer for half-hour to and hour and a half, but it's still really bothersome, and will get in the way of any projects that require saving or recording. I'd guess it crashes around 10-20 times a day.
I included a video of it crashing and what it does just in case that could be of any help. Link: [URL]... The screen goes blank for a moment -- shows oddly colored, fragmented bars in the center of the screen (sometimes red, sometimes silver), shows this text:
Code:
* Speech-dispatcher configured for user sessions
* Starting the Winbind daemo
winbind [ OK
* Starting Common Unix Printing System: cupsd [ OK
* PulseAudio configured for per-user sessions
[Code]...
View 9 Replies
View Related
Sep 1, 2011
As the title says, running folding@home always crashes Ubuntu when it gets to working the steps. This occurs when using the smp flag on the client. I tried removing smp and it worked, however it is slow and i can't take advantage of all 4 of my cores. My hardware specs are in my sig. At first i though it could be the memory, but after running memtest i get no errors. This does not occur on windows vista, however that is 32bit not 64bit
View 9 Replies
View Related
Feb 22, 2010
I am using an HP dv6 series laptop. The wireless works fine in Ubuntu 9.10 (must install the Broadcom STA wireless driver). When I try to use Kubuntu 9.10 my computer crashes when I try to install the driver. Is there any particular reason why it works in one and not the other?
View 6 Replies
View Related
Apr 28, 2011
Like the title states my computer will crash when running fullscreen games and Unigine heaven 2.5 on 1920x1080. I'm using 10.10 64 bit os. I'm fairly new to Linux.
In windowed mode it runs fairly well without crashing.
I would really love to run crysis on this at some point(if you know how let me know)
My system is comprised of the following hardware...
asus M4a78lt-m MB
2 x WD Caviar Blue 500GB HDD in RAID 0
AMD X2 Athlon 3.2ghz Regor (OC'd stable at 3.75ghz)
8GB Ripjaws 1600mhz and 2GB 1333mhz super talent memory = 10gb @ 1333
Nvidia GTX460 SE 1G running a single Acer X203H 1600x900 (270.41.03 Driver)
Dual 480W PSU's
One dvd-rom
View 1 Replies
View Related
Aug 11, 2009
My Fedora 11 installation was a breeze but i have been experiencing crashes sometimes. the computer hangs and i have to do a hard reset.
Here is what /var/log/messages say before the crash:
View 5 Replies
View Related
Jan 30, 2010
I've installed Fedora 12 64bit, but the computer crashes while booting, basically after the irqbalance or rpcbind steps.
Here are photos of the error messages:
Here are my hardware specs:
MB: Biostar TF560 A2+
CPU: AMD Athlon 64 X2 Dual Core 5000+
RAM: DDR2 800 Dual 128 bit, 2T (4GB)
GPU: ATI Radeon HD 3870
The sound and network cards are integrated but I've tried disabling them from BIOS and the problem persists.
Note that I've tried Ubuntu (32bit and 64bit) and it also crashes about 30 seconds after loading the graphical interface (either installer or login screen). Fedora's graphical installer worked flawlessly, tho. I've also tried SLAX (using it right now) and it works without any problems.
View 5 Replies
View Related
