OpenSUSE :: Saving In YAST2 - Host Name And Domain Server Config
Jun 1, 2010
While in YAST2, everything seems to save fine except for the information in the "Host Name and Domain Server Configuration" screen. I have two servers side by side, the one works perfectly fine, the one does not. I can save the IP address and changes to DHCP and Static, but when I enter in the information for the Domain Name and Host Name, I click next, it saves, but when I go back in to it, the items I set are blank again. The boxes are not greyed out, you can type information in without error. When entering YAST, it requests the root pw which also works fine. I am not using any strange characters other than letters/numbers. I am going in to the screen by clicking network devices-->Netword Card-->Host Name and Name Server.
View 1 Replies
ADVERTISEMENT
Mar 16, 2011
I have unexpected problem with yast2 in xen kernel!
My system is
MB Asus p8h67-m evo
CPU Intel i7 2600k cpu
RAM DDR2 8gb
Ive install clean minimal server config (11.3 x64), make all updates from yast2, than reboot, than from yast2 start installation of XEN (in Virtualization, not in software management), reboot, set Xen dom0 to boot and than, after login, starting yast2 and got on blue screen with text "Loading modules,
sbin/yast2: line 399: 5427 Illegal instruction $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
and return to promt
[Code]...
View 9 Replies
View Related
Sep 3, 2011
It's been a while since I've use linux (specifically suse). But my wife and I are expecting our first child and our office/second bedroom is now being converted into the baby room. I built the computer that is currently in there and it is a really nice one that I do not want to get rid of. Two 500GB Sata2 drives and 8Gigs of RAM (not to mention my quad-core Phenom AMD processor and sweet asus motherboard) -- I just can't get rid of it. So what I planned to do was turn it into a small home server. I did some research and kept coming back to using opensuse as the server. I read this article The Perfect Server - OpenSUSE 11.4 x86_64 [ISPConfig 2] | HowtoForge - Linux Howtos and Tutorials and it seemed to have just about everything I'd like to do (maybe some extras that I don't really need, but might in the future). Everything was going fine until I got to a certain point. The install went fine, and I was starting to customize some of the settings for my own home setup. Now, the problem...
I've gotten to page 3 of the tutorial The Perfect Server - OpenSUSE 11.4 x86_64 [ISPConfig 2] - Page 3 | HowtoForge - Linux Howtos and Tutorials
and I am installing packages through yast2, and all the packages installed fine except for 'compat-readline4'. I think this is a form of command line editor or something to do with that. I am sure I am going to need it to finish the server set up, but I can't get it installed anywhere. I've tried to install it by pointing directly to the mirror found at rpm.pbone.net and still I get nowhere.
Yast2 auto refresh seems to fail everytime I run it. Even though I installed all the other packages, I get an error message that says it can't get the medium. When I look at the details of the error it says it can't resolve the host for downloads.opensuse.org.
View 9 Replies
View Related
Jul 28, 2010
I want to install opensuse 11.3, and I get a newer computer to install it(X64), but every time I install, I have been stop at "saving bootloader config" (96%). I have waited for a long time, but no use.
View 9 Replies
View Related
Mar 4, 2010
I am new to Linux and I am trying to set up a mail server using postfix. I have done all the configurations(hopefully correct) and all the test seems to work except 2 things.
1) Postfix is running but when I try to restart the service it always fails. I checked the /var/log folder and there are no error messages.
2) When I try sending e-mails using outlook, outlook fails to connect to my server.
I am wondering if I have done the configurations properly. I am a little confused in regards to hostname and domain name. When I do a hostname on the terminal I see the hostname that I gave my server. When I do the domainname command however, domain is none. Is it necessary to have a domain to configure postfix? I have myhostname = my.hostname.com what should my domainname = to if there is none. If I do require a domain name how to I create one? I need to be able to access e-mail from external clients.
View 2 Replies
View Related
Mar 29, 2011
I have a server which runs postfix. The same physical server is running web and mail services for several (3) domains, which I have reserved for future use (nothing serious or valuable, just freetime activities). Server "physical" address (also static IP) is myhost.domain.com. Lets say the other domains it serves are first.fi, second.net ad third.com. I can receive mails OK sent to all of these, I have added those 3 "extra" domains to the mydestination line in main.cf. Sending e-mails also works fine, but the sender is [URL].. I want the sender to be firstname@first.fi
I tried setting sender_canonical_maps = hash:/etc/postfix/sender_canonical in main.cf, and sender_canonical contains:
user1 Firstname1@first.fi
user2 Firstname2@first.fi
and I run postmap /etc/postfix/sender_canonical, and e-started postfix. But if I send e-mail as user1, the sender becomes [URl].. so it re-writed the username part, but hot the hostname/domain part. I also tried setting smtp_generic_maps = hash:/etc/postfix/generic but the results were similar. What do I need to do to re-write sender for user1 (regardless of host/domain) to Firstname1@first.fi?
View 10 Replies
View Related
Apr 14, 2010
i am trying to get postfix to relay through my isp's smtp server, but i am getting an error.Host or domain name not found. Name service error for name=mail.grandecom.net type=A: Host not found, try again...i can send mail inside my domain, but when i try to send an email to a test gmail address i find the above error in the log.
View 10 Replies
View Related
Apr 26, 2010
I am managing a Fedora dedicated server with Plesk 9 and just recently moved the email for one of the domains on the server to Google Apps for business. Unfortunately, I cannot get email messages from the website forms to deliver to addresses on this domain. For anyone familiar with Plesk, I have disabled mail in the hosting settings by un-checking the "Activate mail service on domain" checkbox and there are no accounts in the domain. (Other readings have indicated that this should be enough to allow mail to be directed to the appropriate server). My MX records correctly point to the google apps mail server.
I'm quite comfortable with command line, but I know almost nothing about the sendmail program or its alternatives and my attempts at researching how to set up this relay has been futile. I'm pretty sure I'm using sendmail and not qmail or anything else from what the red-hat style "alternatives" symlinks point to. I've also checked the /etc/mail/access, domaintable, mailertable, sendmail.cf, virtusertable, local-host-names, sendmail.cf, and submit.cf and most of these files are empty (except the .cf files), and the sendmail.cf and submit.cf make no reference to the domain in question.
Here is the output from a sendmail test that was was not received. (Private data omitted of course).
sendmail -v xxx@yyy.com
test email from yyy.com webserver. please ignore.
xxx@yyy.com... Connecting to [127.0.0.1] via relay...
220 my.server.com ESMTP
>>> EHLO my.server.com
250-my.server.com .....
Closing connection to [127.0.0.1]
>>> QUIT
Performing the same test and sending an email to a non-hosted domain works fine.
View 12 Replies
View Related
Jun 7, 2011
Tearing my hair out on this one a little bit, having problems sending message from web based PHP form to user inbox.I keep getting: Undelivered Mail Returned to Sender<me@mydomain.co.uk>: Host or domain name not found. Name service error for name=mydomain.co.uk type=A: Host not found.Running these commands:
$ hostname = mydomain.co.uk
$ hostname -f = mydomain.co.uk
$ postconf -n =
[code]....
View 6 Replies
View Related
Jan 18, 2011
I have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.
[code]...
I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.
View 9 Replies
View Related
Sep 23, 2010
I have to wonder how much testing Opensuse has done with yast-dns-server package. After adding zones to the dns server - the system loses the ability to perform name resolutions. I can copy a named.conf file from a system that does work, except everytime the system is restart the named.conf file is rewritten trashing the updates done and again rendering the system to perform name resolutions.
Anyone have suggestions on how to get yast-dns-server from interferring with the configuration file? I tried just uninstalling the package, but then bind doesn't even start up on boot up.
View 3 Replies
View Related
Oct 23, 2010
This is my second day trying to learn opensuse. My lack of terminology makes it very hard to google for the answers. I need to do this:
opensuse:~ # yast2 install postgresql-server apache2 perl texlive perl-DBD-Pg libapr-util1-dbd-pgsql
I know about yast, however this looks like something that needs to ran from terminal.
View 9 Replies
View Related
Nov 14, 2009
I have installed CentOS 5.4 machine named test.example.com (192.168.1.1)File /etc/hosts contains:127.0.0.1 test.example.com test localhost.localdomain localhostI have read that the loopback addres should not be assigned to host name,only to localhost and the host name should be assigned to 192.168.1.1, like this:127.0.0.1 localhost.localdomain localhost192.168.1.1 test.example.com testIs there any reason why it should be one or another way?
View 6 Replies
View Related
Nov 6, 2010
I've been running a SuseStudio-built VM for a few weeks with no issues. I built a new one recently, and now I can't configure a new vhost in Apache using the http-server module. It gives me this error. Screen shot 2010-11-06 at 11.42.24 AM.png. Why YaST suddenly decided that my hostnames aren't valid?
View 1 Replies
View Related
May 15, 2011
I have a triple monitor setup, that works fine in Windows (either using Eyefinity, or just extended desktops) I HAVE been able to get all three monitors working as extended desktops in Ubuntu, but when I set it up, I usually get "Not enough allocated memory to enable this monitor".....OR by some weirdness, all three will work. but when I reboot or shut down and then come back, only two monitors are working, and I get a message saying that 'the configuration couldnt be saved, or there was a white line in line 1' or something to that effect.
Either get extended desktop working, or Eyefinity.
System info:
Mother board Asus M4a78T-e
6 gig RAM
AMD Phenom II x4 965 Black
ATI Radeon HD 5770 Graphics CArd
View 2 Replies
View Related
Aug 21, 2009
I've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.
View 3 Replies
View Related
Nov 9, 2010
After an automatic update from Debian I get the following error while starting a root terminal:
An error occurred while loading or saving configuration information for gnome-terminal. Some of your configuration settings may not work properly.
Failed to contact configuration server: the most common cause is a missing or misconfigured D-bus session bus daemon.
View 6 Replies
View Related
Sep 8, 2009
Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
View 2 Replies
View Related
Feb 23, 2011
Domain name which is registered on the DNS for an IP and the name of the host with that IP need not be the same. am i right? I mean domain name and host name need not be the same. Is this correct?
View 2 Replies
View Related
May 4, 2011
I have a domain I have never used for some years, the registrar put some adds in it, now I have hosted and configured this domain as a VPS and have started to put files in it but when I enter the domain in the browser, it still displays the adds index of the registrar although I have my own index file in /var/www/. I thought the domain was automatically "taken over" (I do not know the correct technical expression) by the hosting company when my hosting is accepted by the host after they install a bare distro. Obviously, my expectation was incorrect and there is something else I need to do.
View 2 Replies
View Related
Mar 24, 2010
I have a Ubuntu Server that is correctly set up and has been working for awhile. It currently has a domain (Registered by GoDaddy) and it is used as the main. I just bought another domain (From GoDaddy) and I want it to connect to the same server but a different section to host a second site completely separate from the first.
So this is how I want it to be setup:
Domain1 = /var/www/
Domain2 = /var/www/website2
When I put Domain1 in the url like www.domain1.com it will connect to /var/www/
When I put Domain2 in the url like www.domain2.com it will connect to /var/www/website2
View 2 Replies
View Related
Jul 7, 2010
I'm running CentOS 5.4 with sendmail. My computer hostname is bob.domain.com. Whenever I would nc -v 127.0.0.1 25 into sendmail I would get bob.domain.com on the banner. Whenever I send out email the emails would be user@bob.domain.com. I wanted the email to show up as user@domain.com. So in the etc/mail/sendmail.cf file I changed the line
Code:
Dj$w.hostname.com
to this
Code:
Djhostname.com
Now when I enter sendmail I see domain.com in the banner so I know the change took place. However, when I send email using
Code:
mail -s "test" xxx@xxx.com
then email still goes out as user@bob.domain.com. What other changes do I need to make?
View 5 Replies
View Related
Nov 26, 2010
I'm really new to this subject. Instead of purchasing hosting services from another party, what requirements are necessary to host a domain yourself, i.e.:
1. Minimal connection speed
2. Minimal hardware requirements, e.g. disc space
3. Effort to host domain and secure Slackware
4. Will an average ISP provide sufficient reliability, i.e. uptime, and bandwidth?
View 7 Replies
View Related
Apr 12, 2011
iam using centos5.2.configured qmail,vpopmail. while adding domain form vadddomain<domain.co.in> At first time domain folder get created in domains directory.and also postmaster user also get created by default.And also in mysql. Now the problem is after some times or rebooting system domain get erased automatic.also in /var/qmail/users/assign file domain name get erased.
View 1 Replies
View Related
Apr 7, 2011
i had created domain but not getting domain in /var/qmail/user/assign file.also it error /home/vpopmail/bin/vdominfo abc.co.inInvalid domain name
View 2 Replies
View Related
Apr 28, 2011
I just installed 11.04 32 bit (downloaded today) in Virtualbox (4.0.6), with host 64 bit Win7. I'm trying to get Unity working. I've searched and found references to the fact that the Host graphics card must support 3D, which I believe mine does (nVidia GeForce 7900 GTX). Also found some references to try the following:
After the OS install, I did this:
sudo apt-get update
sudo apt-get install virtualbox-ose-guest-utils
Then rebooted and did this:
killall -9 gnome-settings-daemon && gnome-settings-daemon
I also installed the latest Guest Additions. In the VM settings I have the "3D" tick checked, and have 32M RAM allocated to video. But no Unity shows up, just normal desktop.
Any ideas?
View 7 Replies
View Related
Jun 25, 2011
any1 know how to config apache so i can use ServerName at my web browser ?
here is what i am trying to do: i need to host a number of web sites at my mac, for example: hostone.com, hosttwo.com, hostthree.com and etc since i need to host more than one website at the same pc, i use name based virtual hosts so i have hostone at 192.168.0.1:1234 and a servername of "hostone" hosttwo at 192.168.0.1:1235 with a server name of "hosttwo" and etc
my question is , how do i config my local settings, so all of my local network computers can access "hostone" site by type "hostone" at their browser and "hosttwo" site by type "hosttwo" at their browser
View 3 Replies
View Related
Jun 4, 2011
I want to host 5 websites on my new virtual server so I have created 2 nameservers that point to my virtual server's IP addresses as a glue record. What confuses me is when I create a new domain on my server it gives the new domain it's own nameservers (ns1.thenewdomain.co.uk etc) do I need to change these records so they use the nameservers I created earlier? If I do? Which particular records should I change? I'm running a Unix virtual server with a Plesk control panel.
View 2 Replies
View Related
Jun 27, 2011
i need to allow window domain controller user to use file share of linux.windows DC user can see the share file and directories of linux file server but not able to access.
below is brief--
I have a Linux machine which is on my network but not on my domain. I have configured SAMBA FILESERVER for file sharing purpose. I have a Windows XP PC which is on the domain(windows server) that I am trying to connect to a share on the Linux box. I supply my credentials but regardless of which login I use I always get Logon Failure. I have created an account on the Linux machine with the same user name and password as my domain account but so far no luck. Can I connect from a domain PC to a non-domain Linux box? Is there something else I should be checking?
View 14 Replies
View Related
Dec 30, 2010
I'm working for a smallish non-profit that has gone through some recent growing pains. We have two sites that are currently without a domain controller, and no money for MS licenses, so I was thinking of trying to add a couple of additional Linux machines (we already run Linux for web services internally, and I've set up a test case previously to see if I could get a server to join the domain, which was a success) and was trying to find out if I can get them to act as Domain Controllers without replacing the domain. The main issue that I'm having at those locations is drive mappings are not happening correctly against our DFS file servers. The one other location that had this issue had it go away when we added a local DC. The domain is a Server 2008 domain.
View 2 Replies
View Related
