OpenSUSE Install :: Can't Resolve Host For Yast2 In Console?

Sep 3, 2011

It's been a while since I've use linux (specifically suse). But my wife and I are expecting our first child and our office/second bedroom is now being converted into the baby room. I built the computer that is currently in there and it is a really nice one that I do not want to get rid of. Two 500GB Sata2 drives and 8Gigs of RAM (not to mention my quad-core Phenom AMD processor and sweet asus motherboard) -- I just can't get rid of it. So what I planned to do was turn it into a small home server. I did some research and kept coming back to using opensuse as the server. I read this article The Perfect Server - OpenSUSE 11.4 x86_64 [ISPConfig 2] | HowtoForge - Linux Howtos and Tutorials and it seemed to have just about everything I'd like to do (maybe some extras that I don't really need, but might in the future). Everything was going fine until I got to a certain point. The install went fine, and I was starting to customize some of the settings for my own home setup. Now, the problem...

I've gotten to page 3 of the tutorial The Perfect Server - OpenSUSE 11.4 x86_64 [ISPConfig 2] - Page 3 | HowtoForge - Linux Howtos and Tutorials

and I am installing packages through yast2, and all the packages installed fine except for 'compat-readline4'. I think this is a form of command line editor or something to do with that. I am sure I am going to need it to finish the server set up, but I can't get it installed anywhere. I've tried to install it by pointing directly to the mirror found at rpm.pbone.net and still I get nowhere.

Yast2 auto refresh seems to fail everytime I run it. Even though I installed all the other packages, I get an error message that says it can't get the medium. When I look at the details of the error it says it can't resolve the host for downloads.opensuse.org.

View 9 Replies


ADVERTISEMENT

OpenSUSE Install :: Error Message: Couldn't Resolve Host 'download.opensuse.org'

Apr 20, 2011

This is an example of the error I receive when trying to do an update via YaST, YaST2, or zypper. Basically, curl is broken. With out it functioning normally, I can't use openSUSE's update mechanism to fix my system. Need to find a way to manually fix / upgrade curl.There was an error in the repository initialization.'Updates-for-openSUSE-11.4-11.4-0': [|] Valid metadata not found at specified URL(s)History:

- Unknown error reading from 'http://download.opensuse.org/update/11.4/'
- SKIP request: User-requested skipping of a file
- Download (curl) error for

[code]...

View 8 Replies View Related

OpenSUSE :: Saving In YAST2 - Host Name And Domain Server Config

Jun 1, 2010

While in YAST2, everything seems to save fine except for the information in the "Host Name and Domain Server Configuration" screen. I have two servers side by side, the one works perfectly fine, the one does not. I can save the IP address and changes to DHCP and Static, but when I enter in the information for the Domain Name and Host Name, I click next, it saves, but when I go back in to it, the items I set are blank again. The boxes are not greyed out, you can type information in without error. When entering YAST, it requests the root pw which also works fine. I am not using any strange characters other than letters/numbers. I am going in to the screen by clicking network devices-->Netword Card-->Host Name and Name Server.

View 1 Replies View Related

OpenSUSE Install :: Unable To Upgrade To 11.4: Can't Resolve Host / Error Code: Connection Failed?

Apr 1, 2011

I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):

Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'

With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!

Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).

View 9 Replies View Related

OpenSUSE :: YaST2 Failing To Install RPMs?

Oct 6, 2010

I've been trying for awhile to install the restricted formats, but when in the download & and install process, YaST2 pops up saying that such and such RPM has failed. I hit ignore, and it happens again and again to all the other packages, bar the odd few that work.

View 9 Replies View Related

OpenSUSE :: Can't Install LXDE/YaST2 Isn't Responding

Jul 3, 2011

Whenever I tried to install LXDE using the 1-click install, YaST2 just freezes and doesn't respond and doesn't install anything. In fact, YaST2 always freezes whenever trying to install a program with the 1-click install.

So my question is, How do you abort YaST2 from installing because obviously the Abort button doesn't even work! And lastly, how can I install LXDE through the terminal as I always never have a problem installing something through the terminal.

View 9 Replies View Related

OpenSUSE Install :: Yast2 Does Not Work After Some Time Using VNC

Dec 5, 2009

I have problems with running Yast2 under Gnome when I connect via VNC to the computer. The first 20-30 times it worked, but then it simply stopped to work. When switching to another VNC-Server (instead of :1 to :2) it works again for approx. 20-30 times. The behaviour is very much similar to the one described here:

Yast2 startet nicht unter VNC (SUSE 11.1/Gnome)

I use OpenSUSE 11.2 with german language set. The VNC server I use the one that is installed "by default".

When I try to run Yast2 from a terminal under Gnome as normal user I get the following output:

./yast2: Zeile 30: ./lib/YaST2/bin/yast2-funcs: Datei oder Verzeichnis nicht gefunden
./yast2: Zeile 267: set_lang_from_sysconfig: Kommando nicht gefunden.
./yast2: Zeile 192: check_qt: Kommando nicht gefunden.
Qt GUI wanted but not found, failing back to ncurses.

[Code]....

View 4 Replies View Related

OpenSUSE Install :: Bind /Dns Not Showing Up In Yast2

Sep 14, 2010

11.3 ; looking to play with DNS; nothing of the kind is showing in Yast networking menus. Checked, and BIND shows as installed. Also, while I'm crying for help: cant see the windows box next to me; can ping it, and could browse to it with File Manager yesterday, but not working today ! Also; I tried KDE desktop (like new things) but it's driving me nuts (menus too small, I lose the choices as I move through submenus) and I'd like to go to Gnome ; how to ?

View 1 Replies View Related

OpenSUSE :: YaST2 Wanting To Install 250MB Of Extra ****?

Oct 2, 2010

Whenever I try to install anything from YaST2, it decides to include a lot of extra stuff I don't need. It says it's just added dependencies, but I hardly think the Russian translation for the open office help files counts as a dependency for WINE. This also happens when I try to install the amarok mp3 codec.

View 3 Replies View Related

OpenSUSE :: Yast2 Install PostgreSQL Server (Apache2)

Oct 23, 2010

This is my second day trying to learn opensuse. My lack of terminology makes it very hard to google for the answers. I need to do this:
opensuse:~ # yast2 install postgresql-server apache2 perl texlive perl-DBD-Pg libapr-util1-dbd-pgsql
I know about yast, however this looks like something that needs to ran from terminal.

View 9 Replies View Related

OpenSUSE :: When Try To Open Yast2 Or Install/remove Software Nothing Happens

Apr 19, 2011

When i try to open yast2 or install/remove software nothing happens! i tried to restart-logout-install a package from console but it still not warking!

View 9 Replies View Related

OpenSUSE Install :: YaST2 Says 15GB Of Disk Is Too Small?

Jan 12, 2010

I'll get to the point straight away... I'm trying to install OpenSuse 11.2 on a HD that already has Win 7 on it.I left out 15.52 GB of space just to install Opensuse but when I select that partition (which of course is empty) and tell YaST2 to install OpenSuse there it tells me there isn't enough space. Is 15 GB not enough!?inimum requirements where supposed to be 3GB I think...S this is how the disk is devided... Primary partition of 50GB for win 7, 400 of Logic partition for Programs, and supposedly 15GB for OpenSuse...

View 6 Replies View Related

OpenSUSE Install :: YaST2 Started As Root - No Index For Key

Jul 28, 2010

I am wondering (in the light of all 11.3 problems I am having) When I start yast2 (as root) it works but I always get the message
No index for key: "Name" value: "" on the xterm

View 1 Replies View Related

OpenSUSE Install :: Error Messages For All Options In Yast2

Mar 13, 2011

Yesterday, after I reinstall suse linux enterprise 11 in my note book. I got some error messages. They are :
From Suse linux installing processedacroread-9.3.2-0.1.1.i586.rpm
yast2-pkg-bindings-2.17.45-0.2.10.i586.rpm
After installed suse linux.
error messages for all options in yast2.

The story is when I started installing suse linux, I checked first the live cd and I got message that live cd is okay. But, when the installation process was running, I got 2 messages error. But, the messages were informing me to verified from software management module.

So, my questions are :What are acroread-9.3.2-0.1.1.i586.rpm and yast2-pkg-bindings-2.17.45-0.2.10.i586.rpm and what are they fungtions? If my guess is not wrong, acroread means acrobat reader. Is it true? Where is others place I can download them (no.1,2,3) beside the live cd? Or, if the easyest way is live cd. As yast2 got error, is there an other way I can installed them (no.1,2,3)?

View 1 Replies View Related

OpenSUSE Install :: 11.4 - Yast2 Error In Repository Initialization

Apr 19, 2011

I just installed 11.4 and was adding a new repository which I entered incorrectly. Yast2 complained and did not add it to the repository list. Now when I run Yast2 Software Management.

I get the following error message...
"There was an error in the repository initialization.
Error refreshing service Packman 11.4 (vaval.com - Islam Resources and Information. This website is for sale!
Parse error: repoindex.xml[3] Opening and ending tag mismatch: meta line 2 and noscript"

Since this line does not show up in my repository list I cannot remove it. How do I edit the data file directly and where is it located?

View 2 Replies View Related

OpenSUSE Install :: Yast2-firstboot Scripts Not Executing At First Boot?

Dec 31, 2009

I was running openSUSE 10.3 using yast2-firstboot and everything worked perfectly. I have since upgraded to 11.2 and after a post on this forum I was able to get yast2-firstboot to run. The control file was moved to touch /var/lib/YaST2/reconfig_system instead of touch /etc/reconfig_system. All is well there and firstboot does run. I have a script that basically sets up the hostname, IP addresses, etc on the machines. This worked in 10.3 but in 11.2 it doesn't execute. I can manually run the script which I have defined in the /etc/sysconfig/firstboot file. The SCRIPT_DIR="/usr/share/firstboot/scripts" I noticed a new entry this file labeled - # Action that should be done after the firstboot sequence finishes.

FIRSTBOOT_FINISH_ACTION="" Should I place my script here? I read the doc and you can use reboot but need my script to run first. To I just put the name of the script or the entire path to the script if that is the place to put it. On a side note. Does anyone know where the default FIRSTBOOT_FINISH_FILE="" is located? I want to use that as a template but change and add a few lines to this. I just can't locate it anywhere on the system.

View 3 Replies View Related

OpenSUSE Install :: 11.1 - Yast2 Software Management Not Working After Update

Jan 9, 2010

I did a fresh installation of openSUSE 11.1 i586. Everything worked fine. Then I used YaST2 Software Management to add a package. Worked fine. Then I did the Online Update to get the Installation up to date. Worked fine so far. I had to restart the Machine because of the Kernel Bugfix Update. Since then, the YaST2 Software Management is not working any more.

When I do start it, it starts the software manager, shows the "Search Phrase" and so on but when I enter a word and press "RETURN" the software manager immediately closes and takes me back to the YaST2 start screen. No messages, no warnings, nothing. With zypper I am able to install software but no longer within YaST2.

View 9 Replies View Related

OpenSUSE Install :: YaST2 Update Conflicts And Inferior Architecture

Jan 22, 2011

When I ran YaST | Software Management | Package | Update if newer Package Available this morning I get this message:

Code:
#### YaST2 conflicts list - generated 2011-01-22 09:40:42 ####
libxine1-codecs-1.1.19-2.pm.48.15.i586 requires libpostproc.so.51, but this requirement cannot be provided
uninstallable providers: libpostproc51-0.6.26387svn-1.pm.2.1.i586[ftp.uni-erlangen.de-suse]
[ ] break libxine1-codecs by ignoring some of its dependencies
[ ] Following actions will be done:
install libpostproc51-0.6.26387svn-1.pm.2.1.i586 despite the inferior architecture .....
[ ] do not install libxine1-codecs-1.1.19-2.pm.48.15.i586
#### YaST2 conflicts list END ###

What is it telling me? What should I do? What are the implications?

View 2 Replies View Related

OpenSUSE Install :: Yast2 - Bash Apache Command Not Found

May 3, 2011

I ssh to a remote server which is running in SUSE. And I want to install apache2.0 there. Then I used yast2 to install it. But after installing it, I go to the terminal and type" apache -version" to check if apache is installed there. And it said "-bash: apache: command not found". I don't if I haven't successfully installed it, or I have installed it but just haven't put it into PATH yet. So, my problem is that can anyone tell how to check if I have installed it? If I have installed it, then what is the path of the directory it locates? And if I haven't probably installed it, then can you tell me the how I can installed it? And I am asked to install apache mod_wsgi as well.

View 9 Replies View Related

OpenSUSE Install :: Login (Could Not Start Kdeinit4) Yast2 Error

Sep 8, 2011

I am using opensuse 11.3. I am encountering a problem while trying to log in. The problem message was
"could not start kdeinit4. Check your installation"
I tried to solve this problem by following the instructions given in OpenSuSE 11.0 Could not start kdeinit4... i.e., I opened yast2 and then I had to select "software management" from there in order to update all the packages in kde4. But I got another error when I clicked it.

/usr/lib/YaST2/bin/y2base:/usr/local/lib/libstdc++.so.6: no version information available (required by /usr/lib/YaST2/plugin/libpy2wfm.so.2)

The error list continues. I cannot type whole error list ending with similar wordings as above as am using different computer. I tried to solve this one too by following the instructions in Relocation Error but I could not understand its line "...fixed the problem by taking /usr/local/lib out of ld.so.conf, and then running ldconfig" as am new to linux.

View 5 Replies View Related

OpenSUSE Install :: Update Fails - Loop - Flash Player - Yast2-core

Aug 27, 2011

I am trying to update Flash-player and yast2-core as prompted by today's update icon.

I am now faced with a loop that goes like this:
1) click on icon
2) window pops up, "2 packages selected"
3) click on apply, subwindow pops up
4) click on continue, "waiting for authentication"
5) after minutes of waiting, click on cancel, nothing happens
6) click on icon killing subwindow
7) now back to 2)

Aborting the process, starting at 1) again, same mess

Conclusions:
a) No idea what was going on

b) Use Yast instead of clicking update icon

View 2 Replies View Related

OpenSUSE Network :: Cannot Resolve Host Names On Local Network?

Mar 9, 2010

I have a mac and an openSUSE box connected wirelessly to a router. From my mac, if I ping the Linux machine by both ip address and hostname "elmo.local", I get a response. If I ping my mac from the Linux machine using its ip address, I get a response. However, if I ping the mac from the Linux box using its name "kermit.local" - nothing!

This means in order to share files between them via the network, I have to use the ip address rather than name, but I'd rather not. When I had Ubuntu installed instead of openSUSE this all worked fine out of the box, so I'm assuming it's a problem with the setup of openSUSE rather than the router or the mac.

View 4 Replies View Related

General :: Not Able To Log Into Text Console / Resolve This?

Jan 7, 2010

I have just come over from the darkside (Microsoft) and am finding problems with a few items.

I am trying to configure the monitor/video card as I am having problems with the nvidia geforce 4 integrated video card. Some instructions I have sat to press ctrl alt and f1 to go to the text console. I do but it asks for a login and does not accept my user name and password.

What have I done wrong?

View 11 Replies View Related

OpenSUSE :: Install Emesene But YaST2 Stops Before Confirmation That Emesene Is Installed?

Dec 15, 2009

I installed openSUSE 11.2 successfully. I tried to install Emesene but YaST2 stops before i have the confirmation that Emesene is installed. I've the Emesene icon in the menu but it won't start, i just wait but nothing happened.

View 4 Replies View Related

OpenSUSE Install :: Install Gnome After The Minimal Server ( Console Based ) Install?

Feb 2, 2011

Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.

View 3 Replies View Related

Ubuntu Networking :: Could Not Resolve Host Name?

Apr 29, 2010

I'm having an issue where some of my machines hostnames are no longer able to be resolved after setting up a mythbuntu backend to allow netboot. Also it seems that which machines hostnames get resolved is not consistent. (ie sometimes one gets resolved and sometimes it doesn't) I suspect that it has something to do with the changes I made to "/etc/ltsp/dhcpd.conf" to get the netboot running.

I have a Verizon DSL modem/router as 192.168.1.1. Up until playing with the "/etc/ltsp/dhcpd.conf" I saw hostnames of all of my machines show up in its network map. Now, some of my machines still get network access but their hostnames are no longer resolved. What did I do wrong? Here is my dhcpd.conf file:

Code:
# Default LTSP dhcpd.conf config file.
authoritative;
subnet 192.168.1.0 netmask 255.255.255.0 {
range 192.168.1.2 192.168.1.250;

[Code]...

View 4 Replies View Related

General :: 'sudo -i' And Resolve Host

Mar 10, 2011

why does a machine try to resolve host when I issue 'sudo -i' or some other command prefixed with sudo.What is happening in the background?

View 11 Replies View Related

General :: Host Key Verification Failed / Resolve This?

Mar 29, 2011

I know that there are multiple threads with problems like this, but still i didn't found my answer.

The situation is like this:
I have a local server and a remote server, i did a ssh key swap so i can log on to the remote server with no problems (automatically logging on, no need to enter pass or login).
I've made a script that copies (with SCP) a file FROM the REMOTE server TO the LOCAL server (NOT FROM the LOCAL server to the REMOTE server !!!!), and then i get an error like code...

View 2 Replies View Related

Slackware :: Php Curl Can't Resolve Host Getting Error?

Jan 26, 2011

I have a strange problem with using curl function in php on slackware machines. So far I tested this on 2 PCs. I din't test it on any other distributions, so I don't know if it's only slackware problem.

Problem is that I can't use php curl in normal way. It can be tested wit simple code:

Code:
$ch = curl_init("url");
$content = curl_exec($ch);
if (curl_error($ch)) {
echo(curl_error($ch) . "<br>");
}
echo($content);
When I'm opening this php script in browser I'm getting error message:

Code:
Couldn't resolve host 'google.lv'
but I can use curl command in terminal, also it works when I run this php script in terminal like:

Code:
php ./curl_test.php
So problem is not in curl or php itself, but in apache, because this happens only when this script is running in apache.

Searching google a lot, I got to conclusion that apache can't read /etc/resolve.conf file during startup. Strange thing is that it happens only when httpd starts during system startup, but if I'm stopping httpd and starting it again manually, it works as it should until I'll reboot my PC. Restarting httpd also do not work, I need to do start -> stop.

I think that apache reads /etc/resolve.conf only when it starting up and as I have DHCP, maybe network is still not ready at the moment of httpd startup.

I didn't try to configure php as php-cgi instead of apache module, I think then it would work normally because each php script would be separate process and it would read dns information each time, so the same like starting php script in terminal with command:

Code:
php ./curl_test.php
I think there are some ways to workaround it, e.g. delay somehow start of httpd during system startup, or something like that, but I want to find reason of this problem and make it work without any workaround.

View 1 Replies View Related

Debian Configuration :: When Open A Web Browser - Can't Resolve The Host Name

Mar 29, 2011

I've just installed Debian Squeeze from a live CD. When I open a web browser (be it iceweasel or epiphany) and try to go to google.com, it tells me it can't resolve the host name. [Edit: They do, however, allow me to go anywhere on debian.org, minus the search feature] I also get the same error when I try to go to my website running on a local server. However, when I type the server's IP address (192.168.0.10), it goes to the website fine. Basically, any program I run that needs to resolve a host name returns an error, with the exception of the host command:

I've tried changing my DNS server IP from 192.168.0.1 (my router, configured to provide DNS) to 192.168.1.254 (my internet modem, also configured to provide DNS). That didn't help any. Then I changed my DNS server IP to the same one used by the modem, and now everything works.

I've tried googling my way out of the issue, and I've found where someone had the same issue as I've got and fixed it by adding "blacklist ipv6" to their /etc/modprobe.d/blacklist.conf file, but that didn't work for me.

So, recap: Why does resolving domain names fail for certain applications (except the "host" program) when the DNS server IP is that of my router or modem (which works fine for all of my other computers), but suddenly works when I point the computer straight to my ISP's DNS servers, and how can I permanently fix the problem?

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved