OpenSUSE :: Yast2 Not Working On Clean Minimal Server Config With XEN?
Mar 16, 2011
I have unexpected problem with yast2 in xen kernel!
My system is
MB Asus p8h67-m evo
CPU Intel i7 2600k cpu
RAM DDR2 8gb
Ive install clean minimal server config (11.3 x64), make all updates from yast2, than reboot, than from yast2 start installation of XEN (in Virtualization, not in software management), reboot, set Xen dom0 to boot and than, after login, starting yast2 and got on blue screen with text "Loading modules,
sbin/yast2: line 399: 5427 Illegal instruction $ybindir/y2base $module "$@" "$SELECTED_GUI" $Y2_GEOMETRY $Y2UI_ARGS
and return to promt
[Code]...
View 9 Replies
ADVERTISEMENT
Jun 1, 2010
While in YAST2, everything seems to save fine except for the information in the "Host Name and Domain Server Configuration" screen. I have two servers side by side, the one works perfectly fine, the one does not. I can save the IP address and changes to DHCP and Static, but when I enter in the information for the Domain Name and Host Name, I click next, it saves, but when I go back in to it, the items I set are blank again. The boxes are not greyed out, you can type information in without error. When entering YAST, it requests the root pw which also works fine. I am not using any strange characters other than letters/numbers. I am going in to the screen by clicking network devices-->Netword Card-->Host Name and Name Server.
View 1 Replies
View Related
Jan 9, 2010
I did a fresh installation of openSUSE 11.1 i586. Everything worked fine. Then I used YaST2 Software Management to add a package. Worked fine. Then I did the Online Update to get the Installation up to date. Worked fine so far. I had to restart the Machine because of the Kernel Bugfix Update. Since then, the YaST2 Software Management is not working any more.
When I do start it, it starts the software manager, shows the "Search Phrase" and so on but when I enter a word and press "RETURN" the software manager immediately closes and takes me back to the YaST2 start screen. No messages, no warnings, nothing. With zypper I am able to install software but no longer within YaST2.
View 9 Replies
View Related
Feb 17, 2010
After a long time I tried ubuntu(9.10) again on my fileserver, I have some remarks; why does a minimal server installation include X/openoffice? I don't need document conversion on a fileserver and I bet a lot of people don't. Wouldn't it be better to create a new server package and leave minimal minimal? low memory installs (64mb) don't work unless you configure swap by hand in between things, 64mb ram is a lot in my eyes. I mean, not to be rude but if I wanted all this I could've better installed Solaris.
That said it's stable and running fine. Since it's my home fileserver I tried to convert my previously created raid10 mirror on an adaptec 1200 card to a softraid 5 solution. This is wat I did:
[Code]...
View 6 Replies
View Related
Sep 23, 2010
I have to wonder how much testing Opensuse has done with yast-dns-server package. After adding zones to the dns server - the system loses the ability to perform name resolutions. I can copy a named.conf file from a system that does work, except everytime the system is restart the named.conf file is rewritten trashing the updates done and again rendering the system to perform name resolutions.
Anyone have suggestions on how to get yast-dns-server from interferring with the configuration file? I tried just uninstalling the package, but then bind doesn't even start up on boot up.
View 3 Replies
View Related
Oct 23, 2010
This is my second day trying to learn opensuse. My lack of terminology makes it very hard to google for the answers. I need to do this:
opensuse:~ # yast2 install postgresql-server apache2 perl texlive perl-DBD-Pg libapr-util1-dbd-pgsql
I know about yast, however this looks like something that needs to ran from terminal.
View 9 Replies
View Related
Nov 6, 2010
I've been running a SuseStudio-built VM for a few weeks with no issues. I built a new one recently, and now I can't configure a new vhost in Apache using the http-server module. It gives me this error. Screen shot 2010-11-06 at 11.42.24 AM.png. Why YaST suddenly decided that my hostnames aren't valid?
View 1 Replies
View Related
Aug 18, 2010
I have a clean installation of Ubuntu Server 10.04 x64 on an HP Proliant DL380 G3. It has two Broadcom NICs in addition to its ILO. During the installation, both NICs were listed... but neither was able to pull DHCP, nor did they function with manual settings. The first NIC is currently connected and is known good. So I left it alone and figured I'd troubleshoot it later (which is now). This server is going to be a VMware Server host. I wanted to install ESXi on it, but it doesn't like the old server's cheap ICH RAID controller.
[Code]...
I noticed here it says they're disabled. so I thought perhaps this was a 64-bit driver issue. So, I booted my trusty Ubuntu desktop 10.04 32-bit live cd, and the NIC works fine. Now, here's where it gets weird. Seeing that, I booted it to Ubuntu server 10.04 32-bit installation from a flash drive, expecting to see the NICs working fine during the installation.
View 2 Replies
View Related
Jul 12, 2010
I have minimal server installation suse 11.2 and i m trying to configure PPPoE through terminal windows but without any luck. I have DHCP activated on mine network card eth0. Mine gateway is mikrotik router board its working fine. I get an ip adres regular from dhcp server. Did someone do something like this.. does not have to be mikrotik as gateway just step by step configuration through terminal window cos i have minimal server installation... I dont use GUI cos its a web testing server on network
View 2 Replies
View Related
Apr 30, 2010
I had put in a broadcom 4318 (airforce) card and it showed up in network tools as wlan6 with multicast disabled, inactive, and etc. the bf cutter tool also showed up in hardware drivers.
However, after trying to get the card functional - it no longer shows up in network tools nor is bf cutter in the hardware section.
I tried installing broadcom's proprietary driver among some other solutions. I'm running karmic 9.10.
How to start with a clean slate and get my wlan6 to appear again, so I can install this proprietary driver or use driverloader?
View 2 Replies
View Related
Oct 11, 2010
I configured cron to clean my /tmp directory, should I also add other locations to clean and especially /var/tmp.
View 4 Replies
View Related
Mar 17, 2011
I am trying to add a second vhost to my once working apache config. Now I have things really bollixed up and cannot access anything. I am getting a error 400. The access log shows this:
192.168.0.2 - - [17/Mar/2011:11:24:41 -0400] "GET /" 400 951
192.168.0.2 - - [17/Mar/2011:11:24:41 -0400] "GET /" 400 951 "-" "-"
I have a default (I think) httpd.conf file and put all my config stuff in files in vhosts.d. I have 3 files there:
[Code]...
View 14 Replies
View Related
Aug 7, 2010
After I used Ubuntu Tweak to clean up ALL the config files, I retsrated and Grub won't show the menu anymore. I'm still able to get to the latest kernels though but I want to log in to my windows.
View 2 Replies
View Related
Apr 13, 2010
I am using Fedora 12. I have the following problem, when i working with system-config-samba dialog:I add the new user on the server:as following:
Unix username: vova
Windows username:test
As described in Customisation Guide for Red Hat 9: "If the user has a different username on a Windows machine and will be logging into the Samba serverfrom the Windows machine, specify that Windows username in the Windows Username field."So i logged from the Windows machine not under test(Windows username) but under vova.And i logged in without the problem. However it seems that samba should check windows username=test (as have written in samba-config) and ask an password for different users. And additionally, if samba check the currect user in Windows itself and verify it with Unix user, what for we need write the Windows username in samba config? I don't understand
View 6 Replies
View Related
Sep 7, 2009
I was tryin to deploy svn on centos 5 with respect to [URL] I am stuck understandin the location svnpath parameter on svn config
[Code]...
View 1 Replies
View Related
Aug 13, 2010
I have a minimal lucid install to run XBMC with only xinit x11-xserver-utils installed no GUI. I'm trying to get my Logitech Dinovo Edge working via bluetooth. I've install bluez-utils and can do an hcitool dev and see my bluetooth dongle, and I if I use hcitool scan, and press the connect button on my keyboard, the keyboard shows up with it mac address. It won't connect at this point though, so I have to issue a sudo hidd --connec00:11:22:AA:BB:CC and get it to connect.Unfortunately, if I reboot or turn off the keyboard, it doesn't work again without SSHing in and redoing the steps above. Does anyone have an idea to get my keyboard working at startup?
View 2 Replies
View Related
Aug 1, 2011
after starting over with ubuntu minimal (now on maverik , 10.10) i've been strugling to get lirc to work.
[Code]...
View 1 Replies
View Related
May 23, 2011
the following message appears after I enter the root password.
/usr/lib/YaST2/bin/y2controlcenter: symbol lookup error: /usr/lib/YaST2/bin/y2controlcenter: undefined symbol: _ZN9QListData11detach_growEPii
It doesn't launch from the root console, either. But, the text-based YaST works fine. I assume that something went wrong after my last system update. which package I need to downgrade, to get things working, again?
View 1 Replies
View Related
Mar 23, 2011
I'm using openSUSE 11.4 64bit (KDE). I enabled Index of /source/distribution/11.4/repo/oss repository through YaST2 but it is empty and I can't see any source rpm file in YaST2. I even delete that repository and add it again but still empty. I open the link in firefox and it's not empty or invalid link.
Code:
# zypper lr -d .....
View 3 Replies
View Related
Apr 4, 2011
For the past several days I have been getting a notice to update but then when I try to, get the following notice of a dependency problem:
I am running 11.4_64 with KDE 4.6.1 update. How do I clear this?
View 9 Replies
View Related
Apr 26, 2011
Is there a way to know the size of a package in YaST2?I only have 50MB left in my root partition / (Btw, my /home is in a separate partition.) and I'm looking for a way to selectively delete package depending on it's size. Also, when we "remove" a package in YaST2, is it "completely" removed? or is there some residual rpm left? (of course /home/configs would be kept as it is an expected behavior).
View 5 Replies
View Related
Aug 22, 2011
11.4-KDE4.6.5 32bit install,,,perhaps it is the normal way now, but it was new to me: Opened Yast2 Partitioner module, and attempted to set up an extended partition on space unallocated of sdb. Went thru the steps to create and hit finish, immediately i get a kdesu authorization dialog and yast2 Partitioner disappears/crashes. entry in var/log/messages:
Aug 22 09:08:25 blkdragon polkitd(authority=local): Operator of unix-session:/org/freedesktopConsoleKit/Session3 FAILED to authenticate to gain authorization for action org.freedesktop.udisks.filesystem-mount-system-internal for system-bus-name::1.38 [kdeinit4: kded4 [kdeinit]] (owned by unix-user:blkdragon) so, does this mean I have to set up udisks/polkit rules for using the Partitioner? Yast2 was not considered in the default polkit rules for the install?
View 2 Replies
View Related
Feb 2, 2011
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies
View Related
May 27, 2011
trying to enable the nvidia drivers because i wanted to use Gnome 3 and had zero luck. So once i read that suse was a better bet i installed that. the nvidia drivers have installed fine and i can get my required resolution of 1440x900 if i use an old saved xorg.conf file i managed to randomly cobble together a few years ago .. this is it ..
Code:
File generated by XFdrake (rev 247269)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
[code]....
View 5 Replies
View Related
Feb 8, 2010
When I start yast2 it seems to hang at around 50% (the lower progress bar) while refreshing the repositories. It can sit there for a minute before moving on. Once yast2 has started and I add / remove repos the refresh happens very quickly. It's only when starting that it gets stuck.
This is something that really only started after I upgraded to 11.2. In 11.1 the progress bar would move cross quickly and you could see the various repos flashing up above the progress bar. I didn't bother with it too much but it's starting to annoy me now. It also sometimes just hangs there permanently and I have to abort it.
I've tried unconditionally updating the yast stuff but it hasn't helped. My network connection is fine and I have now problems or speed issues with browsing the repo urls from a browser.
View 9 Replies
View Related
Oct 6, 2010
I've been trying for awhile to install the restricted formats, but when in the download & and install process, YaST2 pops up saying that such and such RPM has failed. I hit ignore, and it happens again and again to all the other packages, bar the odd few that work.
View 9 Replies
View Related
Nov 20, 2010
I'm using the yast2 gui interface to configure apache. I think its called yast2_http_server. I added one website with *:80 set as the virtualhost ID. When I go to add a second website with the same thing, it errors out with: The IP address is already configured on another virtual host: *:80/mydomain.com. I have another opensuse box with many websites in apache configured this way.
View 1 Replies
View Related
Mar 5, 2011
if I open Yast2 via SSH I see the garbage (code page related issue; similar to this). If I set some other than UTF-8 in PuTTY (KOI8-U, iso-8859 etc) Yast looks good, but then the same problem appears with Midnight Commander. How can I have Yast to use 'right' UTF-8 instead of any legacy code pages? Or how better deal with the situation?
View 2 Replies
View Related
Jul 3, 2011
I'm trying to get yast2 to default to the QT interface. I have used these instructions but each time I run yast from the KDE launcher it still uses the GTK interface. I have also checked that the Yast2-qt package is installed. And have rebooted after setting it up, but it has still not worked.
I know it can work as if I run in konsole /sbin/yast2 it uses the correct interface?
View 9 Replies
View Related
Jul 3, 2011
Whenever I tried to install LXDE using the 1-click install, YaST2 just freezes and doesn't respond and doesn't install anything. In fact, YaST2 always freezes whenever trying to install a program with the 1-click install.
So my question is, How do you abort YaST2 from installing because obviously the Abort button doesn't even work! And lastly, how can I install LXDE through the terminal as I always never have a problem installing something through the terminal.
View 9 Replies
View Related
