Server :: Service Postfix Restart Fail / Domain Name Config
Mar 4, 2010
I am new to Linux and I am trying to set up a mail server using postfix. I have done all the configurations(hopefully correct) and all the test seems to work except 2 things.
1) Postfix is running but when I try to restart the service it always fails. I checked the /var/log folder and there are no error messages.
2) When I try sending e-mails using outlook, outlook fails to connect to my server.
I am wondering if I have done the configurations properly. I am a little confused in regards to hostname and domain name. When I do a hostname on the terminal I see the hostname that I gave my server. When I do the domainname command however, domain is none. Is it necessary to have a domain to configure postfix? I have myhostname = my.hostname.com what should my domainname = to if there is none. If I do require a domain name how to I create one? I need to be able to access e-mail from external clients.
View 2 Replies
ADVERTISEMENT
Jun 7, 2011
Tearing my hair out on this one a little bit, having problems sending message from web based PHP form to user inbox.I keep getting: Undelivered Mail Returned to Sender<me@mydomain.co.uk>: Host or domain name not found. Name service error for name=mydomain.co.uk type=A: Host not found.Running these commands:
$ hostname = mydomain.co.uk
$ hostname -f = mydomain.co.uk
$ postconf -n =
[code]....
View 6 Replies
View Related
Dec 23, 2010
rhev-h starting NFS service why occur under issue message?
[root@RHEV ~]# /etc/init.d/nfs start
Starting NFS services: exportfs: can't open /var/lib/nfs/rmtab for reading [OK]
Starting NFS daemon: [FAILED]
[root@RHEV ~]# tail /var/log/messages
2010-12-23T09:32:20.507146+00:00 RHEV exportfs[7834]: can't open /var/lib/nfs/rmtab for reading
2010-12-23T09:32:20.562458+00:00 RHEV modprobe: WARNING: Could not open '/lib/modules/2.6.18-194.3.1.el5/kernel/fs/exportfs/exportfs.ko': No such file or directory
2010-12-23T09:32:20.562508+00:00 RHEV modprobe: FATAL: Error inserting nfsd (/lib/modules/2.6.18-194.3.1.el5/kernel/fs/nfsd/nfsd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
2010-12-23T09:32:20.563344+00:00 RHEV nfsd[7838]: nfssvc: No such device
View 5 Replies
View Related
Nov 24, 2009
I have a postfix relay running in RHEL 5. It serves as an SMTP server. Mail traffic is delivers to the exchange server/Active directory system that is handled by another admin. So far postfix serves [URL] I am asked if it's possible to configure the same server to relay inbound and outbound email for the domain [URL]
View 4 Replies
View Related
Feb 17, 2010
I have linux server which 6.2 very old which was installed long back. CVS is running there . problem is sometime the port doesnot listen sometimes listen if i do netstat -an.It is weired. not sure how to restart the CVS service in the 6.2 server
View 1 Replies
View Related
Jun 23, 2010
i compiled and install postfix, and i using relayhost that point to my ISP. but my "DNS server" is on the same server where is installed postfix. and there is running apache with vhosts so i have domain that hosted on same server and in zonefiles of my domain my MX records points to Google Apps, to google's MX servers. But when i try send E-mail via sendmail to mail@mydomainonsameserver.com it not deliver mail to Google Apps totally, if i try to send to another E-mail everything fine it deliver it. so finally i done research this problem in Internet. And find that need to disable deliver mail to localhost(localdelivery)as i think postfix understand that the domain point to the same server where postfix have itself. and try to deliver mail local. but zonefile MX record even the domain on same server can point to another server outside. So i disabled localdelivery in postfix. and problem not fixed
View 2 Replies
View Related
Apr 20, 2010
I am newbie to postfix. I added a new domain to my postfix server in the main.cf under mydestinations variable and the relay_domains file. Also, added this domain to my backend exchange server. When I send a test message from the new domain, my messages from that domain appear to be stuck in the "queue active". What does it mean when you are stuck in this queue? Does this mean that my backend email server (exchange 2003) isn't allowing messages from this new domain OR that the POSTFIX server still needs configuring.
View 2 Replies
View Related
Jul 1, 2010
I have a problem with my mail server on zimbra. postfix service does not start and displays the following error:
[root@ns ~]# /opt/zimbra/bin/postfix start
postsuper: fatal: scan_dir_push: open directory defer: Permission denied
postfix/postfix-script: fatal: Postfix integrity check failed!
View 3 Replies
View Related
Oct 26, 2010
I'm configuring a postfix server for the company I work for and have a question about limiting access by IP address.
First off, we're not using this for SPAM. We're a manufacturing/direct marketing company and will use the email server to contact our salespeople. We do not send UCE. That said, we have had problems in the past with our legitimate email being labeled as spam by a few carriers. This email server is being setup specifically to avoid future problems on that type.
Because of the nature of our business we operate several domains. We want to be able to limit outbound email for a given domain to a single IP Address. For example, say we have have 3 domains - a.com, b.com and c.com - and 3 IP addresses - 1.2.3.1, 1.2.3.2 and 1.2.3.3. We want to set things up so that a.com can only send out email on 1.2.3.1, b.com can only send out email on 1.2.3.2 and c.com can only send out email on 1.2.3.3.
My first impulse is to set these up as virtual domains on the Postfix server but I'm not sure that's the best method. Are there alternatives? What are your recommendations for doing this?
View 7 Replies
View Related
Jan 16, 2010
I neded to make some changes to the httpd.conf file. Afterwards I tried restarting,but it won't restart.It's saying port 80 is already in use. after checking via lsof -i :80 I get this result:
[Code]...
View 1 Replies
View Related
Mar 15, 2010
I am looking at setting up a multiple postfix SMTP servers for a single domain. Below is my requirement, I would appreciate if someone out there could guide me to achieve this using postfix..
1. Want to setup 2 postfix SMTP Server with 1 POP3 Server.
2. Server1 will host POP3 & SMTP services for domain "metallica.one".(IP: 1.1.1.1, MX: mx1.metallica.one)
3. Server2 will host only SMTP services for domain "metallica.one" (IP: 1.1.1.2, MX: mx2.metallica.one)
4. Server1 & Server2 will be used as load balancing for sending mails. (either manual settings in email client, or auto-loadbalancing is still preferred).
5. Mail received for domain metallica.one on Server2 should be pushed/forwarded/relayed to Server1 where POP3 services are running.
6. Outgoing mails for other domains from Server2 should be sent directly to the other-domain-recipients without relaying to Server1.
View 2 Replies
View Related
Mar 15, 2011
I am re setting up a server of mine running red hat enterprise Linux server 6 and I had all of this working befor but for some reason I had troubles getting sasl to work and now when I login my smtp server I get an error stating that my username or password is incorrect though I am sure I am entering both correctly. Would anyone know what could be happening? I have been spending days on the web looking for the solution and only went from sasl not working when started as a service to this. For some reason I can't use Pam with saslauthd and had to use shadow instead of which from what I hear I get to use better methods of secure authentication with smtp
View 2 Replies
View Related
Oct 14, 2010
I am running the following on CentOS 5.5 (Final)
dovecot 1.0.7
saslauthd 2.1.22
When I send an email via TLS I see the following log entries.
Code:
Oct 14 11:53:06 ns2 postfix/smtpd[11372]: connect from unknown[172.16.1.159]
Oct 14 11:53:06 ns2 postfix/smtpd[11372]: setting up TLS connection from unknown[172.16.1.159]
[Code]....
What I'm really curious about is there is an intial TLS connection with a 256 bit cipher, but then.. The last entry states "sasl_method=PLAIN" - so surely this is not encrypted? Or am I misunderstanding how it works?
View 2 Replies
View Related
Feb 16, 2010
I'm trying to change some configurations but when I change it from the default options in main.cf, it doesn't actually update the running configuration. I've even restarted the server all together but it still doesn't update it.In main.cf, here is the configuration I've added:
bounce_template_file = /etc/postfix/bounce.cf
bounce_queue_lifetime = 4h
maximal_queue_lifetime = 4h
delay_warning_time = 1h
View 1 Replies
View Related
Jun 17, 2010
Im trying to get postfix to filter my outgoing mail and basically drop everything that is not in my hash table.
So far I managed to get this going
Code:
Code:
Unfortunately those rules also apply to incoming messages. My goal is to disallow users on my host to change their "MAIL FROM" to anything they like and restrict them to domains I specify. I'm aware that the local part still is variable and a user of domain "foo.com" could use a email of domain "bar.com", but still some of my troubles would be solved if I get this running.
View 2 Replies
View Related
May 13, 2011
I'm using Ubuntu Server 10.04 and I can successfully relay mail generated by php scripts through an Exchange server.What I want to do is accept incoming mail from the Internet through postfix and relay it to the Exchange server but I want all mail that is not addressed to ...@mydomain.edu to be discarded.
View 3 Replies
View Related
Jun 1, 2010
While in YAST2, everything seems to save fine except for the information in the "Host Name and Domain Server Configuration" screen. I have two servers side by side, the one works perfectly fine, the one does not. I can save the IP address and changes to DHCP and Static, but when I enter in the information for the Domain Name and Host Name, I click next, it saves, but when I go back in to it, the items I set are blank again. The boxes are not greyed out, you can type information in without error. When entering YAST, it requests the root pw which also works fine. I am not using any strange characters other than letters/numbers. I am going in to the screen by clicking network devices-->Netword Card-->Host Name and Name Server.
View 1 Replies
View Related
Oct 25, 2010
I have a lightweight admin background, but good enough to set up most servers. I have switched from sendmail to postfix for the first time, but I keep going around in circles on the following...
In sendmail, I used to maintain a table (mailertable) where I would redirect email like this
Quote:
View 1 Replies
View Related
Jul 30, 2010
I have a mail server taking care of mail for my 4 domains; the first is used for virtually all mail, the second rarely used anymore, the third is virtually 100% spam the past year(?), and the fourth isn't in use (and never has been, so no spam). What I'd like to do is to reject all mail to the third domain. Right now this is what I get (I tried to send to a nonexistent address from gmail):
[code]....
Since my username (xyz@) is the same for all domains, I could (or so I hope) change the reject message to give a hint to replace [URL] with [URL] and try again.
View 2 Replies
View Related
Dec 25, 2009
will the command service httpd restart the apache service if i enable httpsd service in graphical mode
View 12 Replies
View Related
Nov 24, 2009
I'm running VNC Server on CentOS5 on a brand new installation, this is for some of my students to use specific software via VNC on their machines from home that they otherwise don't have access to on their Windows machines. This has been working fine on our previous server for a few years but the hardware is now outdated so I have upgraded and put a fresh install of CentOS 5 on. This works fine for about 24 hours and then eventually one of the session ends up freezing where the user then can see everything on their session, the cursor can move but they cant click a single thing.
View 1 Replies
View Related
Aug 16, 2009
I've setup postfix using mysql tables and all works except for sending to an alias. The mysql logs show that postfix is only looking at the mailbox table for where to deliver the mail for the alias. However it is not looking in the virtual alias maps table. There are no complaints from postfix on startup to indicate that there is anything wrong, and if I send to a virtual domain listed as a relay on the server it does look up the virtual alias table... even though the domain is not hosted on the server....
So the question I have is where to look next? The mysql log shows the expected lookups from postfix EXCEPT for the virtual alias map queries.... why would it not be checking the table? Since it is not looking up the virtual alias it bounces the addresses back to sender complaining that the user doesn't exist... It does deliver to a virtal mailbox, however again it never checks the vitual alias table.... so it only delivers since there's a mailbox for it rather than needing an alias...
View 2 Replies
View Related
Feb 28, 2010
i can smb in centos 5 and i run service smb restart, it shows :smb: unrecognized service..... i run rpm -qa |grep samba,it shows
samba-common-3.0.33-3.7.el5
samba-client-3.0.33-3.7.el5
.....
View 2 Replies
View Related
Mar 13, 2010
I have a suspend problem in my laptop. Sometimes, when resuming from suspend, the network adapter is down (that is, the network does not work and the light of the network adapter is off). Restarting the network service doesn't work, because I think that the system forgot about the hardware, and probably the driver should be reloaded.Does anyone knows how to do that?(ps. /etc/init.d/networking restart does not work, because the hardware driver is not being recognized anymore).
View 5 Replies
View Related
May 15, 2010
the mail server itself will receive mail, that part works. i'm using dovecot imap to grab my mail, that works. but if i try to send mail from my iphone using an account on that server it doesnt work. this is what i see in syslog: May 15 07:14:52 coax postfix/smtpd[1432]: NOQUEUE: reject: RCPT from mobile-166-137-139-003.mycingular.net[166.137.139.3]: 450 4.1.8 <eppo@customconnexions.com>: Sender address rejected: Domain not found; from=<eppo@customconnexions.com> to=<xxxxxxx@aol.com> proto=ESMTP helo=<[10.25.15.47]>
View 1 Replies
View Related
Oct 11, 2010
whats the difference between restarting/stopping apache using 'service httpd restart/stop' and apachectl restart/stop. I know that using 'service httpd restart' is actually a script in /etc/init.d/httpd but what about apachectl?
View 1 Replies
View Related
May 24, 2010
I'm trying to figure out how to access the local part and the domain part of an email address in postfix's main.cf. For example, myname@mydomain.net has myname as the local part and mydomain.net as the domain part.I get the whole email address with %s. I want to speed up the lookups by writing better database queries.I've had no luck finding this in the otherwise well documented postfix.
View 2 Replies
View Related
Apr 2, 2011
[root@itsupport ~]# service httpd restart Stopping httpd: [FAILED] Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down Unable to open logs [FAILED] Iam facing the above error when i restart the service httpd
View 9 Replies
View Related
Aug 21, 2009
I've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.
View 3 Replies
View Related
Mar 14, 2010
My dhcpd service get failed every time when I try to start it
1) Actually I have a lan connection which has a static ip network 192.168.10.0/24 and the pc to which is using the dhcpd has a ip address 192.168.10.1/24
2) And I have a internet connection wirelessly which has a network 192.168.2.0/24
Now I want to problem ip address in the network of 192.168.10.0/24
Here below is the configuration file of dhcp server:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none; .....
View 3 Replies
View Related
