OpenSUSE Network :: Using TP-link Wn422g Usb Wifi Key?
Nov 22, 2010how can i use my TP-link wn422g usb wifi key?
View 9 Replieshow can i use my TP-link wn422g usb wifi key?
View 9 RepliesI need to know that how should I install my usb Wireless adaptor , it's a tplink tl-wn422g v 2 , is there any way to install it ?
View 3 Replies View RelatedFor some reason I don't understand SUSE tells me there are no network devices available. I've checked for any 'firmware' and 'kill' in both boot.msg and hardware information. I've got an ACER Aspire 8935G with WiFi Link 5100 (Intel). The only info I found that could point to the reason is:
[Code]...
There is one more thing that could be related: I've got some touch-buttons to the left of the keyboard that turn wifi and bluetooth on/of. The bluetooth one works, but nothing happens if I press the wifi one.
I also know that this hardware worked on fedora 11 and 12, so it's probably only a matter of settings/additional packages. If you respond, please keep in mind I can't use any internet connection-based commands, as the system doesn't accept the hardware responsible for cable connections either. I can download files if needed.
I'm trying to get my Dell Latitude work with wifi speed >54Mbit/s, and up to now without any success. The router is a Dlink DIR-635, it has 'n' enabled and working (got an apple laptop connecting at 130Mbit/s, can't test the actual throughput though, since it's the only high-speed device).
Here's the device data:
0c:00.0 Network controller: Intel Corporation WiFi Link 5100
Subsystem: Intel Corporation WiFi Link 5100 AGN
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
[Code]...
I'm running 11.4, added the compat-wireless recently to be able to run the newes firmware (iwlwifi-5000-5.ucode , firmware version 8.83.5.1 build 33692), but still all I get is 54Mbit/s. I'd like to know if ANYONE ever got the 802.11n speed on linux, and in particular with these intel cards.
I moved to Berlin recently and I got wireless internet through an access point. I'm supposed to use the laptop's built-in wireless netcard to access the internet. This usually works in windows (connection falls out from time to time), but I have yet to make it work in linux. I'm using OpenSuse 11.3 64-bit and the Knetwork manager. Most of the settings in the network manager are correct, but it keeps wanting to use system certificates for the server. By that I mean it keeps checking 'Use CA System certificates'.
So I can't choose the CA-certificate supplied by my internet provider. I keep removing the check-mark and pointing it to the 'hotzoneCA.der' certificate. I also got a 'personal' certificate, in lack of a better word. Its called 'jacob_collstrup.p12'. The Knetwork manager seems to accept the 'jacob_collstrup.p12' certificate, but not the other one.
I just put the certificates in a folder like this /jacob/home/hotzone/zertifikate/ I can see the network fine using the Knetwork manager, and the signal strength seems ok. Not too good, but it shouldn't be a problem. I might have messed up the system, since I first tried this guide, prior to experimenting with Knetwork Manager:
1. (had to run this one as su)
Code:
wpa_supplicant -w -i wlan0 -c /etc/wpa_supplicant.conf -Dndiswrapper -dd �t
2. (This was supposed to be put in a wpa_supplicant.conf file)
Code:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
opensc_engine_path=/usr/lib/opensc/engine_opensc.so
pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
[Code]...
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
I often use an Ethernet cable to connect my computer to another computer for various purposes. But when I do that, I cannot use the internet even though I'm still connected to a WiFi access point. I'm presuming that's because openSUSE is trying to reach the internet through the Ethernet cable, which has precedence over WiFi.Is there a way to enable internet usage via WiFi while I'm connected to another computer over Ethernet?
View 9 Replies View Relatedim having problems installing TP-Link TL-WN851N on suse 11.3, no internet activity at all
View 4 Replies View RelatedI am a Linux Distro user from 2006. Last year till i am using openSUSE 11.3. Recently i get a problem, When i enter a link My Firefox redirect to iwsearch.net (Infoweb). I install it few days ago. I this its my Browser (Firefox) problem! But I install Opera, Chrome no change same problem. This is very annoying. Too much pain for me. How to remove iwsearch.net.
Also another request to openSUSE Network Manager developers, Please add a options on Wired Connection. The options is Original MAC and Cloned MAC like Ubuntu 10.10 (Gnome), But i need it on KDE, because now i fall in love to KDE. So, i need (i think most of users need) MAC cloned systems, My ISP conection is MAC systems. Pain for change from Command mood I don't like to change from Konsol. We have two Wimax provider- banglalionwimax.com and qubee.com.bd , We are whole Linux user in this Bangladesh can't using USB modem, only Support Gigaset Modem. Its Indoor modem. But USB modem is portable and flexible. Please its hard request do something for USB modems.
i only need localhost for testing some phpnow i get[Wed Apr 28 18:44:57 2010] [error] [client ::1] Symbolic link not allowed or link target not accessible: /srv/www/htdocs
View 9 Replies View RelatedI have an HP notebook DV9760ed but I have no idea what I should use wlan driver. and I am a layman with Linux.
I tried with ndiswrapper and the driver of Windows XP bcmwl5 use only the wifi still not working.
I'm running opensuse 11.2 on a Dell laptop with a intel wifi card.
I'm at a hotel with wireless protected by the MAC address. My MAC address is already registered and allowed to connect. However when I connect, the connection hangs just a few minutes and I got disconnected.
I tried to id some problem by scanning it with wireshark, but I did not found anything.
I wonder if there's some kind of MDNS problem...
I've been searching for a couple of hours and have not found any threads that solve my situation... hope I'm not repeating something here.
Setup: Notebook with openSUSE 11.2 using KDE 4. Using Network Manager to manage network connection (although I've tried configuring this using ifup as well with no luck).
I need to be able to connect to client networks via a network cable (Ethernet) and connect to the internet via my MiFi 2200 Mobile WiFi. Both cards/connections are active with the following:
I have no problem mounting drives from the client's network. But, can not reach the internet. If I disconnect the ethernet cable, the browser will immediately connect to the internet and load web pages.
I'm assuming the ethernet connection is taking precedence over the wireless connection?
I can't imagine that there is not a way to set this up. If Windows can do it, I'm sure openSUSE can!
I Have an HP Pavilion G6. I recently installed openSUSE after having no luck with another linux distribution. I was told openSUSE is more compatible with laptops, so I figured I'd give it a try. I am now facing the same problem I had been facing w/ the other distribution (Ubuntu). My Network Adapter doesn't seem to be recognized by any linux operating systems. It is a Ralink 802.11b/g/n WiFi adapter. When I open the "network" tab, my home wifi is not listed, nor are any around me. In fact, I can't even open the "wireless" tab.
I've installed any recent drivers for my adapter, and I went to extensive lengths to try to solve the issue on my previous linux distribution. I don't know what output to give you from the terminal, nor do I really know any commands to look for anything. On a side note, I had been messing with my touchpad application, trying to set my preferences. I check the boxes for horiz. and vertic. scrolling with two fingers, and apply. They don't work. I check the boxes for using two finger tap to do something, and three finger tap to do something else.
I'm running 64 bit openSUSE 11.4 with KDE. I would like to install Wi Fi Radar. where I can obtain the RPM for it? I have looked but can only find older versions of it for older versions of SUSE..
View 5 Replies View RelatedI currently have a WiFi network at home that serves two PC's, a Laptop (all SUSE 11.3) and a couple of WiFi radios. I also use IPCop as the Firewall. The system currently uses 802.11g, but the PC's and Laptop really struggle to achieve any reasonable internet data speeds, particularly as their RF range to the Wireless Router is very disappointing, so I have a couple Wireless Access Points. Unfortunately, whilst these WAPs might slightly improve RF coverage, connecting to the Router via one of them only serves to slow down the internet upload and download speeds even further. (Not much point in paying for expensive 4M internet access if I am only achieving a typical download of 500-600k!)
I want to completely replace my 802.11g with 802.11n - to both improve range and throughput. I'm looking at the 'Netgear Range Max Dual Band Wireless-N Gigabit Router' as this also has 2.4GHz (my WiFI radios are only 2.4GHz compatible). Unless, of course, anyone has any good reason to recommend I DON'T purchase it? My problem is that I am struggling to find up to date, accurate information that can advise me on which 802.11n (2.4GHz and 5GHz) PCI cards, PCMCIA and USB Adapters are compatible with SUSE.
i've been looking into OpenSuse for a while now, and finally got around to installing it, so far so good however i can't get my Laptops' wifi card to work, i can use my Eth0 chord but thats all. My laptop model is:Toshiba Satellite L755 with a intel pentium processorMy Network card is:02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)Please get back to me on what i need to do to fix this, so i have a flawless installation
View 1 Replies View RelatedI have a Sony Vaio with built-in WiFi. I deemed the built-in WiFi to be flaky, so I installed a WiFi PC Card.bOpenSUSE 11.2 stock GNOME install out of the box, is there a way to disable just the flaky WiFi interface with Network Manager? It seems I can disable all WiFi or enable all WiFi but not individual interfaces selectively. If I connect to my router, the flaky interface wants to act as the dominant interface and makes my connection slow and unreliable.
I hate to make comparisons with Windows, but it's very obvious how to do it there. Is this something I can do with Network Manager or in GNOME? Or is this something deeper, changing configuration files with a text editor or recompiling kernel?
My WiFi can connect to internet without any problem, until I plug my ethernet cable ...then I lose internet.
So the question is : how do I configure my ip/dns and stuff to still have internet when I'm plugged by cable at the same time! it was working on windows ;-)
Running openSuse 11.2-64 on a DualCore / 2Gb machine.I have 3 nfs shares described in my /etc/fstabAll three were mounted at boot time when I was connecting to the network through the wired interface (eth0).I need to use the wireless interface, and even if that interface is up and running well (I use ifup), the nfs client doesn't start... if just after boot I do a mount -a or simply a nfs start, everything comes up and runs well.This machine will not be used by myself, and the users cannot just jump into a command line and type nfs start or even mount -a (they would need su privileges...)I have disabled the eth0, killed the eth0 config (with yast) edited /etc/sysconfig/nfs and setted the NFS_START_SERVICE to yes to force the gssd and idmapd to always start even if there was no nfs entry in fstab, but nothing changed.
View 7 Replies View RelatedI am wondering why I used to pull a much faster download and upload (approx 20 down 3 up). Now I only get 2 down and barely 1 up). I am not sure why this happened. Any ways to check on this? Just this one, dell d505 running suse 11.2. All other WiFi computers are pulling bandwidth as expected.
View 7 Replies View RelatedIs there a tutorial for how to set up a wifi connection for complete newbies to openSUSE? My laptop sees other routers, but won't let me connect to mine. I set WEP, HEX, type in the key, and then nothing happens. On the list it says this is unsecured, even though I have selected WEP.
View 2 Replies View RelatedI installed Gnome 3.0 with One Click install and after reboot KDE Network Manager shows all the wifi access points but clicking on them doesn't do anything seems like the click doesn't work on it.
I want to remove GNOME 3 completely from the system, what step should I follow?
I recently installed openSUSE 11.4 and the wi - fi conection doesn't work, but with Ubuntu worked without problem. What can I do to get wi-fi connection working on this distribution again?
View 9 Replies View RelatedI have 2 laptop with opensuse 11.2. One of them is connected to the Internet through a Mobile Connection with a CDMA/EDVO modem on the usb port. I want to share the Internet connection with the other laptop through the WiFi interface of each of them. How should I proceed?
View 3 Replies View RelatedI'm running opensuse 11.2 on my Asus 1000H, today I found the new kernel Kernek-Desktop 2.6.31.8 will cause system lock down when I try to connect to any wifi assess point. I updated to 2.6.31.8 from Opensuse-11.2-update days ago and today it's my 1st time to try to connect to wifi with this new kernel.
Downgrade to 2.6.31.5 will solve this problem.
my wifi and dongle usb modem both are not working doesn't work on dell laptop inspiron 1520 withn opensuse 11.2.
View 1 Replies View Relatedafter trying several pci and usb network cards none were able to have their ssid broadcasted. The question that i have is: Can a suse box be converted to act as an acces point without the use of atheros based hardware, without switching over to ubuntu and or debian, without the use of openwrt?
View 4 Replies View RelatedI have a problem: when I log in with my account NetworkManager doesn't connect to my home WiFi connection, cause it wait for authorization. No change if I try to retype the connection password, it still wait for authorization!
View 9 Replies View RelatedI've been in doubt weather to install Linux open SUSE or Mint on my Dell inspiron 1501 laptop. Having tried the latest SUSE live CD (not finding a way to use WiFi) I decided to install Mint (Katya release). Now it turns out there's a bug on Ubuntu/debian related linux distros in connection with Dell Laptops, specifically on WiFi cards by Broadcom. (If you want to know more, check this Ubuntu forum thread and my comment on it.) My question is: are there any known bugs on Dell with OpenSUSE? An additional question would be: is it at all possible to use WiFi with the latest SUSE live CD?
View 4 Replies View Related