I'm trying to set a PHP script on my http server. The Script is "Gen2". I Follow All the instruction of the script and set up in the server but when i open it on the web browser this error happen.
Free Image Hosting
I try others script and works correctly
I don't Think is a script error because it was tested in a web server.
*** I dont write the script I download from the internet
here is the script gen2.rar
I need to have Opensuse 11.2 use my proxy server here in the office and it is by hostname/ip:8080 only not HTTP. The problem is using Yast2 I don't have the option of using the proxy that way it wants http. I've been using opensuse on and off since 9 (great flavor BTW my favorite) Easy as you need it to be and just as complicated as you want it to be, a perfect mix.
View 8 Replies View Related* a router/gateway. The external interface have the public IP, an other the DMZ, a third the internal room* a DMZ with the web server* an internal network (internet public room)I redirect the http port 80 to the web server. You should see him there.But I can't see this web site from the internal room. From the public IP /URL I have some sort of non existent message (sorry forgot to copy it). If I call for the private IP, I get the home page (but not the CSS files)the gateway nat's the networks.What is the trick to see the web site from the internal network?
View 4 Replies View RelatedI've been running a SuseStudio-built VM for a few weeks with no issues. I built a new one recently, and now I can't configure a new vhost in Apache using the http-server module. It gives me this error. Screen shot 2010-11-06 at 11.42.24 AM.png. Why YaST suddenly decided that my hostnames aren't valid?
View 1 Replies View RelatedI've been attempting to setup PXE/HTTP network installs so we can better handle deployments for new systems. I have a test CentOS 5.4 VM running, and another test VM that I want to deploy 5.4 to. TFTP, DHCP are all working correctly. Apache 2.2.3 config "seems" OK. When I kick off the VM which I will install to, DHCP discovery and IP allocation works, the TFTP server is found, I am presented with a menu option of OS selection.
I choose #1, for my 5.4 but then it immediately tells me:
"Invalid or corrupt kernel image"
/var/log/messages doesnt show anything other than the DHCP OFFER/ACK process and that TFTP client doesn't accept options
/var/log/httpd/error_log doesnt show anything either
Not sure where else to look for diagnosis.
My Apache config directory: /var/www/html/CentOS
Content listing:
[root@CentOS-test CentOS]# ls -la
total 4515700
drwxr-xr-x 4 root root 4096 Jul 9 10:38 .
drwxr-xr-x 3 root root 4096 Jul 8 16:46 ..
-rwxrwxrwx 1 root root 4619468800 Jul 6 15:54 CentOS5.4.iso
-rwxrwxrwx 1 root root 932 Jul 6 17:37 initrd.img
-rwxrwxrwx 1 root root 70 Jul 6 17:37 ks.cfg
drwxr-xr-x 2 root root 4096 Jul 9 10:38 msgs
-rw-r--r-- 1 root root 13100 Jul 9 10:37 pxelinux.0
drwxr-xr-x 2 root root 4096 Jul 9 10:38 pxelinux.cfg
-rw-r--r-- 1 root root 932 Jul 9 10:33 vmlinuz
pxelinux.cfg contains:
0A000000
default
pxeos.xml
My Apache DocumentRoot: /var/www/html/CentOS
Directives:
<Directory "/var/www/html/CentOS">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
Forgot to add this line from my pxelinux.cfg/default file:
label 1
kernel 5.4/vmlinuz
append initrd=5.4/initrd.img ramdisk_size=16000 method=http:/10.37.129.3/CentOS ip=dhcp
(I think I have found my problem.. 5.4 was in the TFTPBOOT directory, but now that I'm using HTTP, I changed this to be:
kernel CentOS/vmlinuz and append initrd=CentOS/initrd.img) -- question is, will just changing this work?
In Network Settings in OpenSuse 11.1 while using "Traditional Method with ifup" I am able to set up a box as a server and connect via http over the net BUT Firefox cannot browse. If I switch to "User Controlled with NetworkManager" I can run Firefox but my server is not contactable. How do I do both?
View 4 Replies View RelatedMy box has to connect to internet using specified http proxy.I have set proxy in both kde control center and yast2 control center. They both tell me the proxy works fine. But when I really try to use yast2 to update my system, it report an error:
Code:
Failed to download ./repo/repoindex.xml from [URL]
History: - [AbstractCommand.cc:195] URI = [URL]
Even I try
Code:
export http_proxy=http://XXXX
yast in command line,the error still exist.
In debian apt-get and slackware slackpkg,my proxy works fine. So I am sure it is not my fault and maybe it is a bug of yast2.
My computer shares an internet connection using an ADSL router.There are other three machines.I have set up a Apache server for learning purpose and I want it to be inaccessible from anywhere else including the PCs in the network.When I enter my ip-address assigned in the network (192.168.1.1xx) from other computer,I get my ppages and I dont want that.
How can I block HTTP requests from other computers?
Problems with launching data files of the nas and saving to them is a kde problem. The dot desktop files have to contain access rights for smb/http etc and even when given these it still will not work. I have mainly concentrated on getting the VLC video player to work as it is capable of playing from just about any source, comes with codecs etc etc. Amazing package really.
Pure K apps such as kwrite at least work fine. I tried setting up samba but to no avail.
As dropping a file into VLC's focus didn't do anything I created a vlc desktop icon and dragged the nas file onto that. It plays and a kde error message pops up from plasma shell - can't find file!
I enable kde automount. The content of that when it starts is disturbing. It shows my system disks a detachable and not attached! No need to worry though. I selected mount on log in and attachment where the server was shown. VLC still wouldn't work.
Next I enable NFS file transfers on the NAS. This has allowed me to use open with directly onto an avi file on the nas. I can also click launch them. Remaining problem is opening files on the nas from within VLC. Up pops the kde message "you can only select local files". The file manager here seems to be an instance of dolphin. This suggest that there is going to be a problem saving files to the nas as well. Looks to be the case. VLC can convert formats and all sorts of things. If I select a file locally and try and convert it and save to the nas up pops the "you can only select local files" as soon as I select ok having set the path and file name.
Strange thing is that working transfers seem to be using CIF even though it took an NFS enable to get it partly working via KDE's automount. Dolphin only allows a CIF set up which has a distinct advantage as a direct ip address can be entered. The automount has introduced a very very long delay before kde is up and running following a log in. Samba is even worse in this respect and both seem to lack a method of direct ip input which means they have to find the server.
One other aspect. As far as NFS is concerned from a very recent post elsewhere nautilus works. Pass on CIF. And of course it's all instantaneous and ok on windows even on vista. Enabling the TV protocol on the nas has confused Vista as it only wants to connect like that and needs drivers. Might also be down to having NFS enabled though. MS might not like that.
I have filed all of this on bugzilla if anyone would like to vote - bug number 695648. Seems to me that the CIFs route should be the default for ease with many users on home networks. I'm also sure that the problem is basically KDE preventing aps from accessing the nas.
I installed Nagios on my Ubuntu 10.04 server using apt-get and when I accessed the web console, everything was OK. I made some changes to apache (creating some new virtual sites) and since then Nagios gives me a warning message for HTTP with the message, HTTP WARNING: HTTP/1.1 404 Not Found. The sites that I created are working perfectly. I noticed that the attemps are 4/4. Does this need to be reset or does Nagios automatically reset that once it detects the issue is resolved?
View 1 Replies View RelatedI have troubels with internet, on different Linux x64 systems on my laptop(Lenovo ThinkPad sl510), but if I load WindowsPE all is OK ( what coud it be? where to search?There is an hardwere firewall/nat/gateway in my local network, it allows only connections to dst ports tcp 80 (http), udp 53 (dns) and no frags, no icmp, deny in and etc. But Windows Internet (the same Firefox) works fine , and under Linux sites doesn't loding full or "connetion timed out"...But if I have can start downloading any file it would be downloaded full (I have downloaded DVD iso of SuSe)Dns throu nslookup responce not evry time...Decreasing of MTU to 1372 didn't help (( Deactivating ip v6 also....What coud it be? What is different betwin Windows and Linux in DNS clients is any alternative dns client in SuSe? Is the trouble only in DNS?
View 1 Replies View RelatedI have a normal user (sites:users) and the usual http user (wwwrun:www).I'm hosting several sites and I want to be able to upload stuff via ftp, so I'm using the "sites" home (/home/sites) to keep the sites I'm hosting. Giving read permissions to all inside /home/sites makes it accessible and readable to the wwwrun user. Problems come when I need to upload something. The easy way is to give 777 permissions to the folder that's going to receive the file, but I don't feel comfortable at all with that.
What do you recommend? Is there any group configuration that could help me (like adding "sites" to the "www" group)? Or any other configuration at all that might be according the the best practices?
I installed WordPress 3.x on my localhost/Apache server, but I can neither install plugins nor update anything.This happens with both the stable WP3.0 version and the 3.1 beta. When I try to search the Plugin Directory from the WP dashboard, I get this message: An Unexpected HTTP Error occurred during the API request.When I run an update, I get a page asking for the login credentials for the ftp user ("To perform the requested action, WordPress needs to access your web server. Please enter your FTP credentials to proceed. If you do not remember your credentials, you should contact your web host."). Since I'm part of the 'ftp' group on the system, I enter my system login information, click Proceed -- and get a blank page that does nothing.
I've gone to YaST, and I see that the system ftp user has a 6-character password (which may or may not be mine). I'm afraid to change it and risk screwing up other ftp-related functions. I'm running openSUSE 11.3, and am obsessive about updating. I will note that I have an old 2WIRE router that often requires me (including Zypper repos) to enter IP addresses instead of DNS-based URLs to successfully download stuff. Not sure if this is related, but just in case...
How to create the virtual web site (name based) accessible on http and https simultaneously ?
Example
server have ip address: 192.168.251.22 and virtual IP address=192.168.151.22
Target: create VirtualWebSite(name based) accessible on http and https simultaneously. ?
I can create a virtual site(name based), but he will be accessible ONLY on http or ONLY on https.
Is there a tool or way to find out how much http or ftp data is going through network?
View 4 Replies View Relatedhow do i able to allow some users that are able to create content in directory of http server. For example: i have configured a web server which have default document root /var/www/html, now i want to extend my web server through virtual hosting , i have enable virtual hosting, but i want that user sumit is able to create content in /var/www/html/secret. which is the document root for my virtual site?
View 5 Replies View RelatedSomebody know anyway to install Centos with http install into a vlan network? I need to tag interface during ip-confgiration.
View 1 Replies View RelatedI'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedI have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View RelatedI have been beating my head for the last few weeks on this problem, (although I have been taking the wrong approach, it seems).
I need a gateway to direct web traffic to three separate servers/domains. I have been trying to do this with both a dns server and , (seperatly), apache server to forward requests. The dns server was a no go, and <i can only get apache to redirect http and ftp.
After Googling this ALOT, I believe that what I need is a gateway server to redirect my traffic to the 3 different servers. I have been reading about using using nat and iptables for this and was wondering if anyone had any advice/suggestions on this. The other thought I had was to use something like pfSense to create the gateway, but I am still reading the documentation, and I am unsure if this approach will work.
I have a debian box running Apache2 and PHP5.2.6 lenny.
When a request is made via https, php displays the content fine. If the request is made over HTTP the file is offered for download, rather than displaying it.
I know its probably something trivial but I've never seen this issue.
The plot thickens, I can display PHP over HTTP in some directories but not others (which offer the file for download)?
Here is my query:
Squid document says that Squid accepts only HTTP requests but speaks FTP on the server side when FTP object are requested.
We call Squid HTTP and FTP caching proxy server. Does it also caches FTP contents? Is it possible to configure FTP clients to use Squid cache? When we make an FTP request to an FTP site via Squid will it be bypassed?
I am trying to network a drive which is a USB drive. The directory is /media/My Book and I am at a loss on how to network it properly. From my laptop that has linux mint, I click on network and I see SFTP File Transfer on linux-8m03 but it can never seem to mount.
View 1 Replies View Relatedhow to create network policy and system policy in opensuse11.4 and domain policies also???
View 1 Replies View RelatedUsing netcat, nc(1), craft a valid http/1.1 request for getting http headers (not the html file itself!) for the main index page of www dot aalto dot fi. What request method did you use? Which headers did you need to send to the server? What was the status code for the request? Which headers did the server return? Explain the purpose of each header.
nc -v www dot aalto dot fi 8080
HEAD / HTML/1.1
host: www dot aalto dot fi
And it returns:
200 OK
Content-Length: 858
Content-Type: text/html
Last-Modified: Thu, 02 Sep 2010 12:46:01 GMT
[Code]....
I really don't know what does it mean. Question 2: Using netcat, nc(1), start a bogus web server listening on the loopback interface port 8080. Verify with netstat(, that the server really is listening where it should be. Direct your browser to the bogus server and capture the User-Agent: header "Direct your browser to the bogus server and capture the User-Agent: header" I don't understand this question.
I setting up a web server on my Linux (Centos) using "Apache" web server. And its working well, it will show my websites. But when i try to put my url in a internet browser (ie. only type "myweb.com" ) is only be [URL]. Usually as i know like the other websites (ie. google.com) it will go to auto replace the name be [URL]. But my url here it's not be replacing like that. How to do this configuration. I don't know where the services that i need to look. (ie; named (bind) or in Apache web server it self)?
View 2 Replies View RelatedI'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something.
Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.
I have tftpd-hpa and dhcp3-server up and running. I just want to install server edition via network, from the host machine (my laptop, running ubuntu 9.10) with an ISO file (ubuntu 8.04 32-bit server edition). I managed to boot the client machine with pxe-netboot technique, but instead downloading all the files from internet, I need to do this process directly from ISO. To transfer ISO from host to client, I also installed Apache. I unpacked ISO file into /var/lib/tftpboot/server/. I created a link to the Apache root: /var/www
Code:
ubuntu@ubuntu:/var/www$ ls
returns => index.html server
server folder is the place where I unpacked the ISO.
My dhcp3-server has this setup and it works well with netboot, but I don't know how to add Apache to the formula to transfer the iso file from host to client. Firewall is disabled. This is my edited /etc/dhcp3/dhcpd.conf file.
Code:
host pxeinstall {
hardware ethernet 00:06:29:DE:E3:CD;
fixed-address 192.168.2.4; (client IP)
next-server 192.168.2.2; (host IP)
filename "/server/install/netboot/pxelinux.0"; (relative to tftpboot)
} subnet 192.168.2.0 netmask 255.255.255.0 {
range 192.168.2.2 192.168.2.5;
option routers 192.168.2.1; }
When I pxe-boot the client, the process comes to a halt when tftp server is trying to access to pxelinux.0 file. I got thls error:
PXE-T00: Permission denied
PXE-E36: Error received from TFTP server
I have no experience with Apache... so I think there is a problem with my IP addresses.. Do I need to use 127.0.1.1 instead of 192.168.2.1 (my routers IP)?
When I installed OpenSUSE 11.1 on my server, at some point, I gave the server a description. Whenever I connect to any of the shares on the server, this description appears. For example, on one Windows workstation, there is a share which appears in Windows Explorer as "Midwest on 'Cincinnati Corporate ISS Server (ISS0042)' (T:)".
For the life of me, I cannot find where this description, "Cincinnati Corporate ISS Server", is stored. I've search through /etc, and poked around ad nauseum in YAST, but I am missing it. Where is this description stored? What is the YAST function to change it?