I want to share my WiFi internet connection over LAN, so I'm trying to set up IP forwarding. An old tutorial tells me to go to Network Settings in YaST to do this, but that applet says that NetworkManager is now handling all of that stuff.How do I enable IP forwarding while NetworkManager handles my internet connections?
View 2 RepliesI had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?
View 9 Replies View RelatedI'm running suse 11.1 which is configured as a router. Configured are two DSL connections with static IP's and one LAN connection (3 NIC's all together).
Problem: suse firewall will only port forward connections from one of the DSL connections and not the other.
Because I'm running two DSL connections is there something special I have to turn on/enable on the firewall?
How can I enable the network with Networkmanager WIHTOUT logging in in OpenSuse 11.2?
If I define a connection for ethernet the System connection is greyed out. I want to use Networkmanager because I have also wireless connections...
Does anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.
View 2 Replies View RelatedI have no Internet Access with Firefox
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am running out of ideas anyone got a clue.
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies View RelatedI have troubels with internet, on different Linux x64 systems on my laptop(Lenovo ThinkPad sl510), but if I load WindowsPE all is OK ( what coud it be? where to search?There is an hardwere firewall/nat/gateway in my local network, it allows only connections to dst ports tcp 80 (http), udp 53 (dns) and no frags, no icmp, deny in and etc. But Windows Internet (the same Firefox) works fine , and under Linux sites doesn't loding full or "connetion timed out"...But if I have can start downloading any file it would be downloaded full (I have downloaded DVD iso of SuSe)Dns throu nslookup responce not evry time...Decreasing of MTU to 1372 didn't help (( Deactivating ip v6 also....What coud it be? What is different betwin Windows and Linux in DNS clients is any alternative dns client in SuSe? Is the trouble only in DNS?
View 1 Replies View RelatedI have a A7V8X-X motherboard with VT6102 [Rhine-II] on board network device. Internet connections work fine for long time on openSuse 10.3, 11.1 11.2 and 11.3. But since a few weeks ago, internet connections began to fail: several times when I want to open any Internet site with Firefox, it answers:
[Code]....
Ubuntu desktop 9.04 Whenever I try to copy files to any machine on the network, the transfer stops and I no longer have access to the network or the internet. This happens whether I'm doing scp, copy with the gui, when copying to windows machines, and when uploading database files with phpmyadmin. I have been able to successfully transfer large amounts of data outside of the network via ftp, but not to any on the network. I've discovered that I can re-enable network access by restarting NetworkManager.
View 1 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View RelatedI remember that I did configure my desktop PC for wired and wireless connections since openSUSE 11.2, 11.3 and 11.4. Currently I have openSUSE11.4 x86_64 KDE. Today I happen to notice that the icon for NetworkManager in the taskbar has been replaced with a red X. I discovered that Network Manager only shows VPN tab, whereas Wired and Wireless tabs are greyed out. The strange thing is I still have Internet connection with the CAT5 cable being plugged in. I can still configure wired and wireless connections via YAST but I cannot fix Network Manager settings.
View 9 Replies View RelatedWhen logging in to a remote server and starting Nautilus, I then want to add and bookmark an ssh connection to another remote server. I get an EM 'cannot find the location' and when going to 'network locations' EM 'Nautilus cannot handle network locations'. I 've been googling for a few hours, and found a lot of threads that point to gvfs, to samba and to rebooting and reinstalling. Rebooting I did, reinstalling is not possible,the gvfs thing is very unclear. There was an Em on the command line when starting Nautilus: "share extensions disabled", I got rid of that by uninstalling nautilus-share-extensions. Opensuse 11.2 fully updated, running as Kiwi-Ltsp server.
View 2 Replies View Relatedsince a few weeks I have a problem connecting to other hosts when I'm using another wireless network, which has a different DNS IP than I have in my network. I have to change /etc/resolv.conf to change the nameserver. Can NetworkManager control the nameserver? If yes, how?
View 3 Replies View Relatedi would like to know how many connections per sec/min/hour, xampp can handle. I'm going to run SMF forum on my box, because i'm not ready yet with real server solution. System stats are: G31M-S2C; 2x2GB Kingston@920Mhz; E5200@3500Mhz; 500GB@7200 Seagate, all powered by Lucid x64. In a time i will migrate to a quad, mobo with raid support, etc. but at that point i'm want to know how much connections can xampp handle. Because of the forum nature, i think of auto deleting topics witn no new replys in 5 days for saving place (there will be minimum 1 and maybe max 5 photos per thread, maximum size 2Mb for each).
View 4 Replies View RelatedI currently have a home network setup so that my main machine shares it's external hard-drive via NFS. This has been working perfectly for months, however I just got a new laptop, installed openSuse 11.3 x64 and set everything up. Now there is two folders on the external network mount that won't let me do anything and always just return Networking: Stale NFS File Handle. The system still works fine under my old openSUSE 11.2 x86 laptop. I have tried unmounting the drive from the laptop, restarting the NFS client, and restarting the NFS server on the main machine. None of these have made a difference.
It is only these two folders that are effected. Everything else works just fine.
i dont have networkmanager. what can i do?
View 2 Replies View RelatedI have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedI am experiencing troubles when connecting to my new private network under Linux (works fine with Windows). I cannot get an ip address and the logs tell me a bit more, but I would like to know how to proceed to resolve this issue. My network adapter is an Intel Wifi Link 5100 using the iwlagn driver. Connecting to other WEP APs usually works flawless, it's the first time my system won't connect at all to this particular WEP encrypted access point.
Logs: NetworkManager: pastebin - collaborative debugging tool
wpa_supplicant: pastebin - collaborative debugging tool
I seem to have somehow messed up my repositories and now NetworkManager isn't working.
I have two errors happening, which I'm sure are related. First of all, when I try to load knetworkmanager, I get the error:
Code:
knetworkmanager: error while loading shared libraries: libkminterminals.so.4: cannot open shared object file: No such file or directory Second of all, when I restart my computer, upon loading I get a message from Akondi Server Self-Test saying several databases failed. I've never seen this before, so I think fixing these errors would be best? Some of the errors are MySql failed, akondi not registered at dbus, etc.
Lastly, I don't have a wired connection so currently my machine has no internet. I'm using a second laptop to get necessary files and I transfer them with usb.
I WAS using opensuse 11.1 with gnome networkmanager and vpnc. I am NOW using opensuse 11.2 with gnome networkmanager and vpnc.When vpn concentrators are configured, they are configured with 'split horizons' (or not). If not, a default route is required from the client to pass ALL client traffic through the vpn connection. (when the connection is established, the vpn client replaces the default route on the client machine to point to the host site) If 'split horizons' is enabled, only the traffic bound for the host site is passed through the vpn connection.
What I have noticed, is since I installed 11.2, the vpn client is NOT enabling split horizon on connections that call for it. In stead, it is putting in a default gateway every time. This is a big problem, because for those sites that are configured for split horizon, doing this means that no Internet traffic will pass unless you manually adjust the route table.
I was setting up a new 11.4 system and disabled ip6 as we don't use it. After that I couldn't get X11 forwarding working. After searching around for a while, I found this topic [URL] ssh-x11-forwarding.html which at the end mentions enabling ip6. Magically, after doing that and rebooting I can now do X11 forwarding again. Just seems strange that IP6 is needed for X11 forwarding.
View 1 Replies View RelatedI have heard the wpa_supplicant in roaming mode, although absent from the various Debian (and Debian-related) forums and wikis, can handle automatic connections to a variety of encrypted and open networks as well as network-manager does... and better when using the MadWifi drivers!
View 1 Replies View RelatedI find that the new KDE4 notification icon is not very easy to see.The "progress" indication is a microscopic vertical progress bar, that I find very difficult to interpret.OK, it is a minor annoyance, but I do find that I regularly try to use the network on my laptop before the connection has been established.It is also a regression over the icons in 11.1 or before, which were very clear.If people agree with me on this point, I will post a bug, with the aim of getting a clearer icon.
View 1 Replies View RelatedI installed OpenSuse 11.2 LiveCD. I'm currently running patch download and installation so maybe this will fix my problem. When I use NetworkManager, WPA or WPA2 are not an option. I'm give four encryption methods (WEP 40, WEP 128, LEAP and Dynamic 801.x) Is this a problem with my Thinkpad T23's 802.11b wireless card? Do I need to install a patch?
View 4 Replies View RelatedI have a successfully connected VPN connection. When hovering on the networkmanager applet it show beside the wireless connection also the connected VPN. The icon also changed from staircase-bar to staircase-bar with forelock. Oh yeah I'm using GNOME desktop.However when right-clicking on it and choose Connection Information I can only found tab for the wireless connection. How can I have the information tab also for the VPN connection, showing like IP address and gateway used?
View 1 Replies View RelatedI just tested Networkmanager on OpenSuSE 11.2. I tried with my wired connection and it works.
I thought I test to connect with network sharing with my Android phone. The Android phone connects according to Networkmanager, but I'm not sure if it actually works as the wired connection is still active.
I tried to figure out how to disable the wired connection, but eventually gave up and just pulled the wired network plug.
But surely, there must be a way to disable connections from Networkmanager?
On fresh install of 11.4 everything worked fine, but after some updates networkmanager stopped working properly on my netbook (intel atom n270 based).When I log in, network manager shows that networking is disabled and I can't connect. Checking/unchecking the checkbox does nothing. All settings in Yast are OK.To make it work, run "/etc/init.d/network restart" and then plug in the wire OR (in case of wireless connection) I restart network from console, unchecck and check the checkbox in networkmanager and only then it starts to work as it should.
View 9 Replies View RelatedInstalled opensuse 11.4 and wireless network started automatically. Then I changed the name of the computer in YAST, and restarted. Now I cannot get NM to start automatically at boot. The red X shows up on the panel app Network Management and settings buttons do not activate the wireless device. I have to start NetworkManager from the command line. After about 30 seconds the wireless hardware symbol turns on and then I can connect to the network.
HP Pavilion Dv7
opensuse 11.4 64bit AMD
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
KDE desktop
[code]....
I just finished a fresh install of 11.3 on an HP 7900 small form factor and have no network connectivity. In Network Tools eth0 shows the state as inactive. Network Connections didn't have a connection, so after letting it create one there is no MAC address. I copied and pasted the MAC address from Network Connections eth0, set up a static address with default gateway, netmask, etc. all set appropriately and rebooted. Still no joy.
I want this to get an address via DHCP, I just set up a static address for testing.11.2 sensed the NIC without issue, but 11.3 doesn't seem to like me right now.I wanted to get this deployed on 40 machines today. Oh well.