I have a A7V8X-X motherboard with VT6102 [Rhine-II] on board network device. Internet connections work fine for long time on openSuse 10.3, 11.1 11.2 and 11.3. But since a few weeks ago, internet connections began to fail: several times when I want to open any Internet site with Firefox, it answers:
[Code]....
I have no Internet Access with Firefox
I first tried an upgrade from 11.3 to 11.4 and lost Internet Access, so i re-loaded 11.4 from scratch on clean partitions.
I am connected to my wireless WPA2/PSK connection, have an IP, am able to see the network.
I turned off and disabled the SUSE firewall.
I tried setting Firefox proxy settings to auto and to none, i dont use proxy.
I am currently posting this through an SSH connection to my 11.1 server from the new install of 11.4 on a Dell latitude D600 laptop (not using the on-board Broadcomm that is an issue for a later date).
I am running out of ideas anyone got a clue.
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies View RelatedI have troubels with internet, on different Linux x64 systems on my laptop(Lenovo ThinkPad sl510), but if I load WindowsPE all is OK ( what coud it be? where to search?There is an hardwere firewall/nat/gateway in my local network, it allows only connections to dst ports tcp 80 (http), udp 53 (dns) and no frags, no icmp, deny in and etc. But Windows Internet (the same Firefox) works fine , and under Linux sites doesn't loding full or "connetion timed out"...But if I have can start downloading any file it would be downloaded full (I have downloaded DVD iso of SuSe)Dns throu nslookup responce not evry time...Decreasing of MTU to 1372 didn't help (( Deactivating ip v6 also....What coud it be? What is different betwin Windows and Linux in DNS clients is any alternative dns client in SuSe? Is the trouble only in DNS?
View 1 Replies View RelatedI want to share my WiFi internet connection over LAN, so I'm trying to set up IP forwarding. An old tutorial tells me to go to Network Settings in YaST to do this, but that applet says that NetworkManager is now handling all of that stuff.How do I enable IP forwarding while NetworkManager handles my internet connections?
View 2 Replies View RelatedI have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedDoes anyone know how to permanently enable X connections from all machines on my local network. I keep having to enter 'xhost +' to allow X connections.
View 2 Replies View RelatedI had a google of this but can't find anything useful. I use networkmanager to configure my wireless card. Currently this only works when I'm logged in to KDE. If I log out the system loses the network connection. Is there a way to make it persistent using NetworkManager?
View 9 Replies View RelatedI just finished a fresh install of 11.3 on an HP 7900 small form factor and have no network connectivity. In Network Tools eth0 shows the state as inactive. Network Connections didn't have a connection, so after letting it create one there is no MAC address. I copied and pasted the MAC address from Network Connections eth0, set up a static address with default gateway, netmask, etc. all set appropriately and rebooted. Still no joy.
I want this to get an address via DHCP, I just set up a static address for testing.11.2 sensed the NIC without issue, but 11.3 doesn't seem to like me right now.I wanted to get this deployed on 40 machines today. Oh well.
network manager isnt showing any network interfaces. ifconfig shows wlan0 and eth0 and internet is working. how can i get network manager to manage those connections?
View 8 Replies View RelatedI remember when using openSUSE 11.3 with KDE 4.5, the network connections started to show the last date used for my "NIC".I am using the plasmoid-networkmanagement plasmoid and KNemo.After I downloaded and installed openSUSE 11.4 64-bit, the network connection no longer shows the last date used. I have set up my card via Yast and Iam connected directly to the Internet. No proxy.To find where this is located, navigate to:Configure Desktop --> Network Settings --> Network Connections --> Wired tab.
View 2 Replies View RelatedFirst a warning that I'm so clueless it hurts. Initially I entered the Linux world as a solution to my blue screening Alienware Aurora desktop (which later fried anyway ironically enough). I decided to give up on Windows for everyday use cause you can't strangle an operating system. My first and there after Linux experiences have been fantastic. Internet works without prompting through various distributions of Ubuntu, Mint, and KDE with the exception of enlightenment.
But now I come to openSUSE 11.4 and as my title suggests I'm having a hard time connecting to the internet. I've got a wireless card and router and all that jazz but I can't even select the options for wired or wireless connections under Network Connections in the Network Management Settings. Everything is greyed out except for VPN. I even have the desktop wired to the router and it still is not giving me any indication that it will connect.
I'm wary of trying to enter ip addresses and things of the like because I honestly don't know what i'm doing here.
My router is a Netgear N150 Wireless WNR1000 and in the Kinfocenter under Device Viewer I found my wireless card to be a RaLink RT2561/RT61 802.11 g PCI and my wired device thingy to be an Intel 82540EM Gigabit Ethernet Controller.
I am trying to find someone that can perhaps assist me with the following.
I have installed my notebook with Ubuntu 10.0.4 and need to setup various VPN connections to clients.
After setting up the microsoft VPN connections according to the normal procedures, I try to connect to one of the clients to test connectivity, but the connection fails.
This happens for all the MS vpn's so far.
I had a look at the daemon.log file and found the following message which I can't seem to find a solution to:
<WARN> connection_state_changed(): Could not process the request because no VPN connection was active.
Is there anyone that could perhpas assist me with this as I am not able to work without VPN.
does opensuse 11.2 come with IPv6 enabled by default? where in the gnome gui can i access these settings?
Edit-i went into the gnome network manager applet and i cant find any IPv6 settings for any of my used connections-ethernet, wireless and VPN connections all seem to only IPv4. Can anyone else confirm that opensuse 11.2 uses only IPv4 on its network connections?
My server SUSE 10.2. I am already working with one pppoe connection, I need to configure the second on the same server? How I do this?
View 2 Replies View RelatedI've been searching for a couple of hours and have not found any threads that solve my situation... hope I'm not repeating something here.
Setup: Notebook with openSUSE 11.2 using KDE 4. Using Network Manager to manage network connection (although I've tried configuring this using ifup as well with no luck).
I need to be able to connect to client networks via a network cable (Ethernet) and connect to the internet via my MiFi 2200 Mobile WiFi. Both cards/connections are active with the following:
I have no problem mounting drives from the client's network. But, can not reach the internet. If I disconnect the ethernet cable, the browser will immediately connect to the internet and load web pages.
I'm assuming the ethernet connection is taking precedence over the wireless connection?
I can't imagine that there is not a way to set this up. If Windows can do it, I'm sure openSUSE can!
Just wonder is there any command that blocks all connections?
I am aware about RedHat #sudo /sbin/services iptables panic
and wonder is there something with similar effect in opensuse?
I have a DNS server with 3 zonesone is dynamic with an associated reverse and one is static
Everything was fine until I added a single host in the staticzone then the server stopped resolving names in that zoneThe only way I could get it to work again was delete the whole zone and re enter the zone and hosts
I'm running suse 11.1 which is configured as a router. Configured are two DSL connections with static IP's and one LAN connection (3 NIC's all together).
Problem: suse firewall will only port forward connections from one of the DSL connections and not the other.
Because I'm running two DSL connections is there something special I have to turn on/enable on the firewall?
My question is simple - is there any linux app or applet which is able to show (monitor) incoming and outgoing connections assuming it's a direct internet access? I was using a firewall on a system off Redmont which was able to show every connection, listening ports of services if some were opened etc.
View 1 Replies View RelatedMy home computer has 11.3 and SuSEfirewall enabled. It connects to the net over the wireless and SuSEfirewall has this connection in the external zone.
I can successfully ssh into this computer from remote (the work computer) but none of the ssh port-forwarded connections work. I'm trying to tunnel VNC over ssh. I also tried setting http on the home computer to serve pages on a high-numbered port (8090) and tunnelling that but it also didn't work - proving that it's not a VNC problem.
Here are the relevant messages from the firewall logs on the home machine:
Code:
I don't understand why this isn't working now, I had the same setup on 11.2 and it worked fine.
The 95.91.92.92 is the public IP address of my home router, I don't understand why a connection would appear to be coming from there when I use ssh-tunnelling?
Just for information in case if it is important to start dhcpd and named: Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable Sep 16 20:26:44 LINUX-SRV named[2417]: nss_ldap: could not search LDAP server - Server is unavailable
Secondly Both config files in /etc/sysconfig set parameters to start in jail root but
[Code]....
I have an Atheros ar5007eg wireless card, and I haven't had problems with this card in GNOME. However, when I made the switch to KDE recently, I can't connect to any wireless networks. A wired connection works fine (that's how I'm writing this), but when I try to connect to any wireless network, it hangs at Acquiring IP Address, then asks me for my WEP key again, I enter it, and the process starts over. I tried using WICD, but I'm not sure if I set it up properly.
View 2 Replies View RelatedMy ISP has for a long time had a broken forward/reverese DNS so that my ADSL connection with static IP address resolves to a completely different IP address on a reverse query. This has not been a problem until I upgraded a remote server from 10.3 to 11.3 last weekend and now ssh connections from my ADSL connection to it using public/private keys are being rejected with the following message in /var/log/messages (IP addresses changed):
Aug 10 12:00:32 penguin1 sshd[1270]: Address 83.175.246.243 maps to 83-175-246-243.static.dsl.aupex.com, but this does not map back to the address - Possible Break in Attempt!
But if I log in interactively with username & password, the connection succeeds. I've changed the StrictModes setting in sshd_config to 'no' but this hasn't resolved the problem. Obviously something in 11.3 is being stricter about this IP mismatch than it was in 10.2 (and no, the server is not using a firewall). There must be something I can change to make sshd more permissive? I've tried before to get my ISP to fix their problem but no luck. This needs to be sorted as a server at my home (which does not run SuSE) retrieves backups from the remote OpenSuSE 11.3 server every night using scp and these are now failing.
Every single time I enter the network manager to edit connections is crashes on exit. I am running opensuse on an Asus eee PC 1000HE with an Atheros network card. The crash report follows :
Distribution: openSUSE 11.2 (i586)
Gnome Release: 2.28.2 (null) (SUSE)
BugBuddy Version: 2.28.0
System: Linux 2.6.31.12-0.2-default #1 SMP 2010-03-16 21:25:39 +0100 i686
[code]....
As an extra point. I wish I could disconnect individual networks instead of just disabling networking to disconnect. I think the newer version of the network manager does this.
I recently setup a new SUSE box for the purposes of acting as an ftp/sftp server. It's currently setup to run ProFTPD 1.3.3.rc3 and mod_sftp/0.9.7. The server has two internal network interfaces eth0 and eth1. eth0 is purely for internal use to accept ftp and ssh. eth1 is outward facing and receives connections from the WAN via SFTP over port 22. The problem I am facing is that after half hour to an hour eth1 stops accepting connections whenever there is no SSH connection present on eth0. I can't figure out why this is happening.
ProFTPD is setup as follows: SocketBindTight directive is on, default server and port are commented out.
[code]...
When the external interface is unreachable the proftpd and proftpd-sftp logs show no record of any connection attempt. I have noticed however if I leave eth0 down eth1 stays contactable without problem. Can anyone give me some pointers on what I can check to find out why this may be happening.
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
I installed Suse 11.2 on clean HD. I cannot connect to the internet. Seems like Suse didn't install drivers for on board ethernet card. It is a Marvell Yukon 88E8056. I'm new to this and don't know how to install the drivers.
View 3 Replies View RelatedI have SUSE 11.0 set up to act as a router/firewall for my home network to the internet through a cable modem attached to an Ethernet card. When I was laid off several years back, I found information that let me connect my network to an ISP via a standard serial modem. I am considering going to the Sprint U1901 4G USB modem and dropping cable internet. Sprint claims the U1901 is Linux compatible. My thoughts are that using the 4G modem should be similar to the old dialup modem. I had a script that connected to the internet whenever internet traffic was detected. Unfortunately, I did not save notes on what I had done to setup the modem to dial automatically, and I have been unable to locate information that seems good to set this up again. I already know that all I had to do to get routing working was simply replace the internet port in the firewall/routing script with the port for the modem. So I assume that is rather trivial.
Would you please point me to a doc, perhaps SuSE specific, that gives reasonable directions on how to set up a "dial on demand" ISP connection? I assume that the 4G modem will be very similar to my old serial modem so that a dial on demand script will work. I did find a dial on demand howto, however, it did not seem to apply.
In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.