I have configured connection properly through mobile phone (SonyEricsson C510) by bluetooth. I get dynamic IP address and can ping everything but can't ping my IP adress which was automaticaly granted, from outside. SuseFirewall is stopped.
View 6 Repliesi installed opensuse 11.2 but the network is still not running. On startup the dhcp client does not recive an adress. Here is the output from the boot.msg
Code:
Setting up (localfs) network interfaces:
lo
lo IP address: 127.0.0.1/8
IP address: 127.0.0.2/8
[Code]...
I setup my computer to use dyndns. I can ping my computer from another computer and I get thisping vielma-server2.dyndns-server.com
PING vielma-server2.dyndns-server.com (71.237.223.228) 56(84) bytes of data.
64 bytes from c-71-237-223-228.hsd1.or.comcast.net (71.237.223.228): icmp_seq=1 ttl=53 time=24.8 ms
[code]...
This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies View Relatedjust installed ubuntu in 1 of my boxes is an old compaq presario v2000. Is running dual boot with XP, the problem is i dont have internet connection(wireless and wired) with Ubuntu but i do with XP. I read like hundreds of posts from diferent forums and i wrote all crazy commands in terminal but aint working. I tried directly trough the modem (motorolla 2210)and with the router(netgear wgr614) via wired and wireless and aint working either. For some reason ubuntu doesnt request an ip adress from the router or the router dont asign an ip adress to my linux box.
View 7 Replies View RelatedI just installed open Suse 11.3, and I cannot SSH my school. Upon further investigation I could not even ping any machines outside my local area network. Ironically I could nmap machines outside my local area network.
View 4 Replies View RelatedI am using opensuse 11.3 64 Bit Gnome. The problem is the network manager & the bluetooth icon takes unnecessarily long time to load (2-3mins) & until it loads I cannot connect to the internet.
View 1 Replies View RelatedI installed openSUSE on one of my work system. The network port wasn't working when I was installing, but works fine now (checked in Windows). But for some reason, I am not able to configure the network. I used both Dynamic and Static IPs (both work fine in Windows) but still no go. I am using Yast Control Center for this purpose. I can't even ping the default gateway when I am using custom settings. When I use dynamic settings, it says Unreachable Network.
View 7 Replies View RelatedI'm new to SuSe and lateley I was trying to establish a Network, when some weired problems occured. I was able to establish the network and i have connection to the internet. The suse-machine is rechable by ping from all the other computers in the network. If I'm tryiing to ping the other computers from the suse-machine, nothing happens. The router responds without packet loss, but every other ping occurs in:
From 192.168.2.6: icmp_seq=2 Destination Host Unreachable
From 192.168.2.6: icmp_seq=3 Destination Host Unreachable
From 192.168.2.6: icmp_seq=4 Destination Host Unreachable
From 192.168.2.6: icmp_seq=5 Destination Host Unreachable
I've been searching for some ideas to solve this problem but couldn't find any.
how can I allow a non-root user to do ping?
View 6 Replies View Relatedi am doing a project in which i have to use xen to create virtualised environment.I have already done this.
now i am using the following setup
host os :- opensuse 11.1with ip 192.168.9.19 and with aliasing ip 192.16.9.14
guest os1:- opensuse 11.1 with ip 192.168.9.107
guest os2:- opensuse 11.1 with ip 192.16.9.13
[code]....
Basically i want the opensuse firewall to stop responding to pings-how do i do this?
View 2 Replies View RelatedI just switched to Ubuntu from Win7 and want to setup VPN connection to my office network. On windows I was using SonicWall Global VPN client using details:
Host: <myname>.dyndns.org
User: <user>
Pass: <pass>
I read in DynDNS.com that simple VPN connection from network manager will not work here and ddclient need to be installed.
I did a shields up test and it told me that 1056 ports were stealth but that my pc responded to ping and was visible on the net. How do i fix this?
View 4 Replies View RelatedI have recently installed open suse 11.2 on my hp hdx18 laptop replacing windows 7. trying to use my phone as a bluetooth access point so i can connect to the internet when im out and about and there isnt a bt openzone network around. my phone is a sony ericsson w910i. i can connect to my phone via blue tooth and use it as a remote control and browse, send and receive files. but cant figure out how to use it as an access point to the internet. win7 had an option to connect via access point giving me instant internet access over the vodafone mobile phone network, but i cant find an option like that in open suse, if there even is one.
View 2 Replies View RelatedStep 1 : In Hyper-v Machine i have created two Virtual Ports.
Step 2 : Now for these two diff ports two ip address with different subnet mask(e.g 192.168.9.19 and 192.16.9.20)have been assigned(and have checked using ifconfig).
Step 3 : In Host machine i have added one subnetmask for one machine next one for another machine,however i m not able to ping both the ports from either of the machines having static ip 192.168.9.13 or having ip 192.16.9.107.
Step 4 : If i add same subnet mask for both machine it is pinging properly between 2 machines.
I'm running openSUSE 11.2 (Linux piura 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 x86_64 x86_64 x86_64 GNU/Linux) and have a network problem. At work, ethernet works fine. When I plug it into my DSL router at home (which works with other computers), I encounter the following behavior: ping can resolve host names, however, traceroute and Firefox and Thunderbird cannot.
It happens for both wired and wireless connections.
unreachable computer's ifconfig reports xxx.xxx.xxx.37 but when I ping that address from another computer it says "Destination Host Unreachable" (all the other computers on the LAN can ping each other except this one particular computer)I can ping other computers from the unreachable computer just fine...
View 9 Replies View RelatedOriginally after an installation of openSUSE 11.4, I had no internet connection at all, even when connecting with ethernet cable. But then I tried switching back to YaST and then back to Network Manager, and restarted a couple times, and now I have internet connection. DNS is also working, for Ping. The problem is that firefox does not use DNS and cannot resolve host names. I can use Firefox with IP numbers.
View 3 Replies View RelatedI am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
When installing, I was not prompted to enter root password, but I was prompted to enter root name, user name and user password. Now it seems Terminal opens with admin permissions for user. This is not good.
View 9 Replies View RelatedI have a Suse 11.2 machine named "susepc" on a network with some other windows machines. From the Suse 11.2 machine, I try ping winpchere winpc is the name of a windows machine on the LAN but the name resolves to an odd ip address:PING winpc.HOMENET (72.215.225.9)he "HOMENET" is the correct name of the windows workgroup, but the ip address is completely wrong. My LAN is based on 10.20.x.x and the winpc ip address should be 10.20.0.100. I can "ping 10.20.0.100" and it works correctly.Some things:- DHCP server is on the router- pinging from winpc to susepc works perfectly ("ping susepc" resolves to the correct IP address 10.20.0.101 and the pings respond)- "net view" on winpc lists the susepc - SAMBA is installed on susepc- the Netbios name is set to susepc- I have a shared folder on susepc that I can see, create files in, etc. on winpc with no problems.- IPV6 is disabled on susepc- I have tried setting up susepc as a WINS server (Wins Support)
- I have tried setting up susepc as a Local Network Browser
I have a problem with the activation of routing under fedora. The problem lies exactly in the file ip_forward who I didn't not change the value to 1. When I use the command echo 1> / proc/sys/net/ipv4/ip_forward. They appears not granted permission. Knowing that I use the root account.
View 1 Replies View RelatedI've tried hardy to grab URL adress from my firefox "address bar" with bash. Is there any way to capture current url adress(or current url location, or current domain) from any decent browser (or by listening to own traffic.)
View 3 Replies View RelatedI would like to save the input of gtkterm ( what is displayed from its window) to a file, and this iautmatically. Because from GTKterm you can rsave raw file by clicking "save every to raw file manually". As it's say on the readme file, you can use "gtkterm -f filename.txt", but i tried and any file is created on the current directory.
View 1 Replies View Relatedi setup a localhost in my system. but am not getting access to the phpmyadmin by entering the user name and password i entered at the time of set up. the /etc/phpmyadmin/config-db.php file is shown below.
<?php
##
## database access settings in php format
## automatically generated from /etc/dbconfig-common/phpmyadmin.conf
## by /usr/sbin/dbconfig-generate-include
[code]....
when i access http://localhost/phpmyadmin/ , the login screen appears but entering the username and password as in the file gives the error #1405 cannot log into mysql server.
I would love to auto-start tomboy at startup. How can I do this ? [Moderator edit: fixed Subject so nobody would expect an automatic Lunch. Is that the same as a free one? ]
View 2 Replies View RelatedWhat are the differences between base address and I/O address?
View 1 Replies View RelatedOkey I have a good start i know there is something I'm missing. After Following this great help tutorial.[URL]..And kinda guestimating and messing around with my Linksys creating a new router assigning a static ip "Lan and wireless" address. configuration for the router looks like this.
[Code]...
I think I might be messing up the interface config file at the "NETWORK" section but i don't know.
it�s been several years since i played with iptables. I have setup like this:eth0 is the only physical device on box and eth0:0 is aliased. Traffic going out of the box to internet uses eth0eth0 116.55.58.1eth0:0 116.55.58.2I have a service listening on port 80 on 116.55.58.2Lets say my client connect to 116.55.58.2:80 through 116.55.58.1 , how do I force (mangle you name it) with iptables that the outgoing source address will be always 116.55.58.2?
View 1 Replies View Related