OpenSUSE Network :: Appropriate Directories To Monitor For Pci Compliance
Apr 19, 2011
There is no "security" forum so I figured I'd post this here.
Because of PCI compliance requirements, we are going to begin using the built-in audit utility that comes with SuSE to monitor file/directory changes. The utility comes pre-configured to monitor many system files but I was curious as if there is a standard list of files/folders that should be monitored for PCI compliance? I've scanned the web but haven't come across anything yet.
View 5 Replies
ADVERTISEMENT
Mar 10, 2011
After installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).
Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.
So I need to reboot again.
When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.
Now my wifi works fine.
View 1 Replies
View Related
Dec 31, 2010
Using a SUSE server, what's the best method/tool available to mount existing shared directories? I have defined shares on a Window 2008 server and am attempting to configure the SUSE server.
View 8 Replies
View Related
Mar 9, 2010
I have a fileserver running openSUSE 11.2 and samba services for file access from MS Windows based workstations. My question relates to changing default permissions on files and directories created from the windows clients.
Following are extracts of the /etc/samba/smb.conf file :
Even with the above entries, sometimes there are files and directories created by the windows clients having permission
Probably my lack of understanding in ACLS.
View 9 Replies
View Related
Sep 15, 2010
I'm working with a vendor on getting a web site certified for Payment Card Industry Data Security Standard for processing our credit card transactions. The vendor's running Centos 5 (which we also run at my business). The current issue has to do with sendmail, which the required PCI security scans say should be upgraded to 8.14.4. However, the vendor points out that latest version packaged for yum on Centos 5 is 8.13.8.
I'm still somewhat of a newbie at this, but from my reading, it seems that installing the 8.14.4 sendmail means using 3rd party repositories and potentially breaking the system. I browsed through "Installing RPMforge" on Centos wiki, which notes that a complete listing of the over 4000 RPMforge packages is at [URL]. Scanning that link shows sendmail packages with lower numbers than what's currently installed, 8.13.8. All I see on sendmail.org are tarballs of the latest verson, 8.14.4, available 2009-12-30. I presume this means you must install from source; I'm not sure the vendor's comfortable with this, especially for such an essential service.
View 2 Replies
View Related
Mar 29, 2011
When you need to change something on the server you can hook up a monitor and a keyboard and do it through the console.
I would like to hook up an external monitor in this fashion for a desktop. The current video card can only support a single display. So I was hoping there was someway to use a second monitor as just a permanent console since simple text shouldn't require a video card?
View 9 Replies
View Related
Jan 14, 2011
Updating my install of OpenSUSE from 11.0 to 11.3 and notice that the Nagios network monitor can no longer probe servers with self signed certs.It appears to be any monitor that used openssl 1.0.0 has an issue. If I install the openssl 0.9.8 libraries and use old plugins linked against it, they work fine.
View 9 Replies
View Related
Sep 24, 2010
Basically, out of the box, is SUSE hardened to meet DISA STIG compliance? along with the question came a 500 page UNIX Security checklist I am not looking forward to reading through nor typing 5000 commands.
View 1 Replies
View Related
Nov 8, 2010
I would like to be able to monitor which programs are allowed to access the internet, but a search for programs to do this has turned up nothing. Preferably, I would like a notification to come up every time an application uses the internet. Is there any (n00b friendly) software available to do that?
View 2 Replies
View Related
Oct 22, 2010
This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
View 3 Replies
View Related
Jan 15, 2011
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
View 9 Replies
View Related
Jan 21, 2011
I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
View 4 Replies
View Related
Mar 26, 2011
Though File Manager allows me to browse Windows network directories ( Ctrl-L shows a path like smb://diskstation/mikeother/Web/Alta_Vista ), I can't figure out how to browse to them in applications like Firefox, which doesn't show "Network" as an option when doing File > Open. How can I browse to the Windows network within FF?
View 9 Replies
View Related
Jul 19, 2010
Currently I'm looking into implementing mod_security on all our apache servers. The installation on CentOS 5.5 comes directly with the "Core Rule Set" by the mod_security devs (curiously Debian and Ubuntu do not carry these) They also offer the Enhanced Rule Set for mod_security in a commercial package [URL] The main point there in their info link is the first point
Quote:
Tracking Credit Card Usage as required by the Payment Card Industry Data Security Standard However acc. to this wiki article ( http://en.wikipedia.org/wiki/Payment...urity_Standard ) that specific requirement isn't stated anywhere, as well as my colleague who's working on the PCI-DSS compliance for our code/servers/etc. mentioned that he hasn't heard of this specific requirement either. So my question would be if anyone has any experience with their ERS package and if it's needed for the PCI-DSS compliance compared to the requirements given in bullet points @ wiki article.
View 2 Replies
View Related
May 26, 2011
I want to sync several directories between my laptop and desktop both at home and away from home. It seems like the tool to use for this is unison (I use rysnc for backups, but union seemed, better for this sort of thing - let me know if I'm wrong).
I found several posts that appear promising, however I was little confused about the details as I don't have much networking experience up to this point.
[URL]
1) Is a reverse ssh connection the way to go? If I only wanted to do this on my home network I could just use ssh right, however in order to get around the router outside my home network the reverse ssh is necessary?
2) How do I handle changing IP address of my laptop?
View 1 Replies
View Related
Jul 9, 2010
I work on machines with different architectures, all of which share the same home directory(what is the technical term for it -- network mounting ?). Since I don't have admin privileges on these systems, I have installed programs in /home/<my_id>/bin. A program compiled for one architecture doesn't work when I login into another system. I'm thinking of creating architecture specific directories which would contain inaries/libraries specific to that architecture and creating a softlink to it t /home/<my_id>/bin. The only problem with this solution is that I can't work on two systems at the same time.
View 1 Replies
View Related
Feb 1, 2011
I use CentOS for the servers I am responsible for. This time, I inherited a piece of hardware that CentOS refused to boot up on, so I installed Fedora Core 14. I have NIS and autofs working -- mostly.The home directories reside on an EMC network storage device. The problem is that when I login as a regular user, all the files under the home directory are owned by nobody/nobody, instead of user/group. I believe this has something to do with NFSv3 vs. v4, but I have yet to find the right trick to fix it.
[Code]...
View 2 Replies
View Related
Dec 19, 2009
i am in need of linux help. iam at college and i need this back/restore script to pass this final part of an assessment. i require a backup script that will not only backup but also restore files to the relevent directories. e.g. users are instructed to store all wordprocessor files in a directory named wp. so i am needing to create a backup directory and 3 directories within that and some files within the 3 directories and then back them up ot restore them. l know i should/have to do this myself by been trying to get/understand info for the last few days and came up with zero.
View 14 Replies
View Related
May 15, 2011
I want to make a webserver with multiple users allowed to login through SFTP to a specific folder, www.Multiple users are added, lets say user1 and user2, and all of them belonging to the www-data group. The www directory has an owner www-data and a group www-data.
I have used chmod -R 775 on the www folder, but after I try to create a folder test through my SFTP server (using Filezilla) the group of the directory created has only r and x permissions, and I am not able to log in with the second user user2 and create a directory within www/test due to a lack of w permission to the group.
I also tried using chmod 2775 on www directory, but without luck. Can somebody explain to me, how can I make it so that a newly created directory inherits the root directory group permissions?
View 2 Replies
View Related
Mar 23, 2011
I am writing a script, in that my requirement is, if all the fill types stored in one directory from that we need to separate different different directories based on the file types.
for example in a directory(anish). 5 different types files
1- directory
2- .txt files
2- .sh files
like that and my requirement is the (1- directory is moved to one new directory(dir) which we are given in the script)and (2 .txt files are moved to another new directory(test) which we are given in the script)and ( 2 .sh files are moved to another new directory(bash) which we are given in the scrip)finally the directory anish should be empty..using bash script.how it is possible !!
View 7 Replies
View Related
Mar 24, 2011
I have openSUSE 11.3. I logged in as root in the konsole and I can't change the directories in the home folder, for example I write "cd /home/java" and I get "No such file or directory" (and the directory exists).Also I can't copy or paste anything in the folders in "Root" from the GUI.
View 9 Replies
View Related
Sep 14, 2010
In system info my ext4 /home directory shows total space of 51.7 gigs with 51.5 gigs available.
My ext4 / directory shows total space 19.7 gig and 7.7 gig free. Whenever I install anything it goes to the / (as guess root directory) In Dolphin it shows my /home directory but anything installed under that seems like it installs on the / directory.
If I have 51 gigs free where is it and how do I gain access?
View 9 Replies
View Related
May 11, 2011
I use "zip -r" to zip the following folder:
/root/Desktop/administration/backup
....My only grip is that when you open the zip file, the parent directories are there too.
So within the zip file I have to navigate through "/root/Desktop/administration" just to get to the directory called backup.
Is there a way for me to zip the directory backup, and not include the parent directories? I want to be able to open the zip file and see only the backup directory listed.
View 9 Replies
View Related
Mar 27, 2010
rm [non-empty directory's name] -r
....and not....
rmdir [non-empty directory's name]-i
..or..
rmdir [non-empty directory's name} -ir
backround:
I just downloaded and innstalled 11.2 about 6 weeks ago, and Have updated several times since... I was very frustrated and found that I did in fact have the proper pernissions to delete this directory. I checked multiple forums for much longer than I would like to admit, and they kept telling me to use (in the end) the same commands.....I finally stumbled upon a forum that again told me to use rm [nonempty directory's name] ...and viola
my /bash can't be outdated can it
View 2 Replies
View Related
May 5, 2011
Since I updated from 11.2 to 11.4 an annoying bug seems to have crept into the shell.
If I type the following and hit tab I get:
cd ~/.kde
.kde/ .kde// .kde4/ .kde4//
i.e. each directory has a / and // version for some reason. I have to enter a / and hit tab again to proceed.
If however I type the following and hit tab I get:
cd /home/tux/.kde
.kde/ .kde4/
i.e. correct as expected.
The ls command does not do this.
This seems like a bug.
GNU bash, version 4.1.10(1)-release (x86_64-suse-linux-gnu)
openSUSE 11.4 (x86_64)
VERSION = 11.4
CODENAME = Celadon
Linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 x86_64 x86_64 x86_64 GNU/Linux
View 2 Replies
View Related
Mar 4, 2010
I'm creating a backup scheme with rsync.
It is pretty clear not to include these:
/var/lib/named/proc
/var/lib/ntp/proc
[code]...
View 3 Replies
View Related
Mar 10, 2011
I recently bought scanner, the driver to which is currently in process and is not yet committed into the main repo, so I downloaded the new code and compiled it into /usr/local/ and openSUSE's YaST scanner configurer doesn't see the new versions and continues to work with the old ones.
View 9 Replies
View Related
May 19, 2010
I'm trying to mount some file systems in the /sys directory with the nosuid option. Upon executing the command:
mount -o remount,nosuid /sys/kernel/security
or
remount nosuid /sys/kernel/security
/etc/mtab will show that they have been applied, but upon restart of the machine, the nosuid option is removed.
Soooo, the question is why are they being removed? Can /sys files carry the nosuid option?
View 7 Replies
View Related
May 25, 2010
Here is the issue:I create saome variables to make shortcut to some directories I go frequently (so, I then I type, e.g. cd $P_DIR). Of Course before that I put a valid value into P_DIR variabe.Also, alias, asalias cls=clearSo, I type cls, and is the same as the commando clear (but shorter)What I want to do is that those variables as aliases stay in the computer when I reboot or turn off and turn on.So, I put "somewhere" (this is the place(s) maybe one for variables, and other for aliases, turn of the computer, and when I turn on, the aliases and variables are still there
View 9 Replies
View Related
Jun 1, 2010
I'm running OpenSuse 11.0 in a lamp configuration with Apache 2. I configured Apache with the .conf files instead of YAST because I am running virtual hosts (that's another story).
My problem is that my server will not render the pages unless the permissions are set to 775 which I know is not necessary. This is also causing a problem because I am trying to install WordPress onto the server. WordPress will run, but it unable to upload images because it cannot create the directories required.
Apache2 is running as 755 with root as owner and www as group. I changed the owner of the htdocs sub-directories to myself, and created a group that has permissions to write to the directory. WordPress runs as my user and has the same permissions (775).
View 4 Replies
View Related
