On my 11.3 KDE if I leave the computer alone to download something and come back to check after a while I sometimes find that torrents or usenet downloads have been stopped long ago and kdeapplet displays the wrong time, anything from half and hour to ten hours late. I usually open NTP configuration screen, check if server is accessible and okay out of it and everything goes back to normal by itself, time is corrected and downloads resumed. What could be the reason for stopping downloads and how can I correct this problem? Is NTP the cause or just another symptom of a deeper problem? NTP is set to "now and on boot", interval is set to 5 min - I think those are all default settings.
I am running OpenSuse 11.2 on my desktop here in the office and when I download anything, other users are complaining over very slow internet speeds. My download speed seems to be the same as other users using Windows, but downloading from a windows machine does not cripple the network. So is there something in my network setup that can be tweaked so that I do not cripple the network when downloading ?
I'm experiencing complete system freezes when dowloading torrents with more than 800kb/sec (I think this is the limit, I've capped it at 750, and it seems to be running ok now). I had this same problem in Ubuntu aswell. But not in Win 7. The problem also appeared in ubuntu when streaming video through VLC with more than 800kbps.
As my connection gives me quite alot higher download speeds this kind of annoys me, and me being quite new to this whole Linux thing, don't really know what to do. I had a dialogue with someone at Ubuntuforums regarding this, but we pretty much got nowhere.
I use Ubuntu 10.04 server as a base for my media center, with rtorrent as my download program. I've had to move into a smaller place where I don't have direct control over the network, and where we have a vanishingly poor DSL connection. When I start up rtorrent, every computer on the network starts having dramatic slowdowns of internet speed, even when both my downloads and uploads are throttled to 1KBps, which is as low as rtorrent will go. Unfortunately, as I said, I don't have direct access to the router. The IT guy says my media center "is sending requests to all the computers on the network like crazy". How he knows that, I don't know, nor do I know exactly what he means.
But it is only when I have rtorrent running, even when it's only running 1k each way. It was my intention to test whether or not running utorrent on my Windows box had the same effect, but it's telling me "an attempt was made to access a socket in a way forbidden by its access permissions" on all trackers, which I've also been unable to resolve. It may or may not be symptomatic of the same issue, but the UI of rtorrent is painfully slow. As in, I push the down arrow, go make myself a sandwich and watch some telly, and maybe when I'm done it's selected the next torrent. I used to use Transmission, but it used more resources and interfered with watching shows.
When I start downloading torrent via transmission, utorrent, deluge every time I get disconnected network which can be fixed with restarting DSL modem, I've never had the problem in Win7 an WinXP.
i want to run a stable service for downloading file in fedora 14 in a network with 800 users. i want to whole of users can connect to server and download my files.
having upgraded two days ago to lucid studio from karmic studio, i have had recurring issues with either a total lockout of wireless connection, despite inputting IP and WEP etc correctly and telling me it has full connectivity. my other problem was i had wireless connection, but could not connect to the repositories for updating or downloading new software.
I tried changing the source to a few different ones and I picked "Select Best Server". Still getting the same msg. I am on a wired connection and there is nothing wrong with my connection.Anyone know the solution if not how do I install nvida drivers?
How do I stop YaST from downloading the repodata every time I open the software manager?Even if I have opened it 5 minutes before, YaST still downloads the repomd.xml again.This is also a real pain if I am offline and trying to install an rpm, because I have to wait for it to realise that it can't access the data before it allows me to skip the auto-refresh.By the time that happens I could have installed the software already if I was using a debian or windows based system.
My KPackageKit is not downloading any update, it shows updates, I click apply, I authenticate, then it asks me to accept an agreement, after which it returns to an empty KPackageKit (as if there were no updates). If I open it again, there are the possible updates again (naturally, since it didn't download anything).
By default, when zypp does an update, it downloads a deltarpm and applies it immediately, during which time the internet connection is open and unused. Can I make zypp apply the deltarpms all at the end, only after it has downloaded all of them? I'm used to this sort of behavior on Fedora/yum, and it reduces the window for which I must keep my internet connection open.
I though i would try out Clamav. After installation and a reboot, As su I issued freshclam.ClamAV update process started at Mon Apr 18 22:29:22 2011Downloading main.cvd [ 72%] the time at that point is 23:32 for 19 MB The download is so slow that I wonder if Clamav is really meant to be used.
I have removed IcedTea packages but I am unable to run Sun Java after downloading the recommended version from sun website as per the instructions at Installing Sun's Java on openSUSE - openSUSE.I do a lot of web games and need sun java installed.In addition, I need help with -
1. Installing fdisk or similar. 2. Read and write for ntfs partition on same hard disk. I've Samba but SUSE can't see 2 ntfs partitions on same hard disk. 3. Gnome/ LXDE desktop install. 4. Testdisk install. 5. Gparted install. 6. Convert .deb packages to .rpm and install those. I used to convert .rpm to .deb in Ubuntu with alien tool.
Whenever I do anything in Zypper, there is always a huge lag before it starts downloading a file, but then it downloads at normal speed. I think this has to do with the fact that it is now trying to download from multiple servers, and I would like to turn that off. Where do I go for that?
I currently mirror the updates repository to my computer using rsync. I was wondering if I could save space and bandwidth by only rsyncing the .delta.rpm files? Are there any disadvantages to this or does zypper/YAST handle updates just fine with it?
I'v downloaded the new versions of suse many times. I average 3 to 4+ times before it's successful, bad downloads(bad checksum) or download stops for no reason. I'v used direct link and bittorrent. Bittorrent takes 2-3 times as long. So, I usually use direct link. I can do the download in about 6-8 hours. The first time, it stopped at 334 megs, using direct link. Using bittorrent, it took about 16 hours. I got a bad checksum. Is there a way I fix the file without downloading it again? Suse 10.4
I am having a problem downloading the packman.inode.at/suse11.3/repodata/repomd.xml. I get an error: failed to establish connection, connection timed out. I cannot get any updates at all.
I just tried to install virtual box by downloading the RPM from their website running it with yast. It said install succesful but I checked the install log and this is the result that I got. The program will not start. I want to run opensuse as my host and install Windows XP to run on top of it for my wife.
My software is System Atom 2GB of ram ION Linux 2.6.34.7-0.4-desktop x86_64 openSUSE 11.3 (x86_64) 4.5.2 (KDE 4.5.2) "release 10" NVIDIA 260.19.12
[Code]...
I did try to run sudo /etc/init.d/vboxdrv setup it failed I than ran vim /var/log/vbox-install.log and this information was in the file /usr/share/virtualbox/src/vboxhost/vboxdrv/build_in_tmp: line 55: make: command not found
I searched the faq, I did a search online for this etc. The reason I ask is that suse on the download page of 11.3 states don't download directly since it is very slow and has no check sum. Therefore the iso may be flawed and you have spent 10 hrs trying to download the iso. My "fast" internet through qwest is at 1.5 mbps download so I assume that is why it is so slow to download the iso of 4.7 Gb.Now for the question the download page suggets you use bit torrent since it does the checksum but will download the iso no faster than the direct method. Second is to use check metalink with the addon in Firefox downthemall. I did this and had quite a time getting the iso link for 11.3 to start downloading. I would start downthemall from the Firefox toolbar and I thought wow!!! it downloaded that iso fast, how cool. Well it was not the iso but the website for the download page! At one point I got it to start downloading the iso but came in this morining and it was still going after 17hrs and showed several hours to go. I gave up and deleated it.
This afternoon I just gave in and started the download again using the bit torrent and I am waiting for the download to finish. I did eveything the site indicated but after and hour I noticed under logger it said **** openSuse-11.3-DVD i586 iso: PIECE 2206 FAILED HASH CHECK. It shows this same message from the begining of the download 7hrs ago to the last few minutes on each section. It states it is 75% complete? Is this normal or am I wasting 10 more hours? Sorry if this is not the place for this question but I never had trouble with downloading 11.2 and burning it to the disk. I think I just used the Directlink method and crossed my fingers. It did download ok!
I put a few Itunes songs into my music folder and tried to play them. It didn't. Then, I got to reading in the forums and noticed that there was a "one click" configuration for Gnome users. After doing some more reading, I saw a lot of references to restricted codecs and things of that nature. After beginning the one-click process and then aborting midway through installation, three questions come to mind:
1) Why all the warnings about legalities of downloading the codecs/files? If I bought the music and I use the codecs to listen to it, where does legalities come into play?
2) While installing some of the different files, etc in the one-click process, I received a few warnings that a particular file was not from a trusted source (I don't remember the info verbatim) and then it gave me an email address, presumably from the developer, and asked if I wanted to install it anyway.
3) If I do go through the one-click process, will I be able to listen to I-tunes or am I pretty much screwed on I-tunes on linux?
I am new to opensuse. I want to install multimedia codecs on my opensuse 11.4. Is there any way to download multimedia codecs as an iso file and then burn a cd to install them on opensuse? Now, I am downloading "NonOSS CD" in add-on downloads section, is this iso file containing multimedia codecs?
I dont have a internet connection and I want to install VLC. I want to create a local repo for a vlc by downloading all the required packages. I tried to do by downloading all the packages from from VLC repo and create a local repo but failed. Its say this dependency failed and that dependency failed. i tried to manually install each and every dependency but still the problem exists.
On Linux Mint (Gnome) i used to go to Network drive. that is on the right hand side of Nautilus there is a short cut for Network. in there i could see my network hard drive and other laptops connected to the network, and i could access my files. but on OpenSuse, when i open the network folder, nothing comes up. may be it needs some sort of configuration.
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
