OpenSUSE Network :: Start MySQL Automatically When The Server Reboots?

Mar 20, 2010

I installed and configured mysql 5.0 on my opensuse 11.1 box. But I have no idea how to get it to start automatically when the server reboots.

View 3 Replies


ADVERTISEMENT

General :: Server Automatically Reboots / When Plug In Network Cable

Jul 14, 2010

Linux Server automatically reboots when i plug in the network cable.it was working fine till 2 days back and no changes were made to it.any light on this note pls? kindly confirm if any logs are required for the discussion!

View 1 Replies View Related

OpenSUSE Network :: ERROR 2002 (HY000): Can't Connect To Local MySQL Server Through Socket '/var/mysql/mysql.sock

Jun 7, 2011

I think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:

Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory

[Code]...

View 6 Replies View Related

OpenSUSE Network :: Automatically Start Knetworkmanager?

Oct 14, 2009

I'm configuring a computer for someone and I don't know the wireless network they will be using. (They are not technical.) I've setup networking to use NetworkManager. It works just fine.However, Knetworkmanager won't startup at boot/login. Therefore, the network doesn't startup automatically. I have to click on the icon in the menu to start it.That works well, but it should be configurable to startup automatically.I've searched this forum for answers and don't find any good ones. It seems there isn't an answer or there is a bug in KDE 4.x. (I'm using KDE 4.3.x)

View 9 Replies View Related

OpenSUSE Network :: Can't Get Squid To Start Automatically

Mar 25, 2010

I have just installed squid and sarg, both are working well. I cannot get squid to start when the machine boots. I installed webmin and configured the setup through the webmin interface where I checked the "start at boot option". I think the problem is that my network card responsible for the web connection is wireless so when squid tries to load during boot it is trying before the Wireless card is up and so it fails. I have tried multiple methods of adding a script to the "dispatcher.d" folder in "NetworkManager" to load squid after wlan0 is up but all have failed to bring up the squid proxy without my interaction. I have not found any two sites that describe the syntax for "dispatcher.d" alike so I may have the command wrong but I have no what to do.

View 9 Replies View Related

OpenSUSE Network :: NetworkManager Will Not Start Automatically

Apr 15, 2011

Installed opensuse 11.4 and wireless network started automatically. Then I changed the name of the computer in YAST, and restarted. Now I cannot get NM to start automatically at boot. The red X shows up on the panel app Network Management and settings buttons do not activate the wireless device. I have to start NetworkManager from the command line. After about 30 seconds the wireless hardware symbol turns on and then I can connect to the network.

HP Pavilion Dv7
opensuse 11.4 64bit AMD
RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
KDE desktop

[code]....

View 7 Replies View Related

OpenSUSE Network :: Knetworkmanager Is Not Starting Automatically On Start Up?

May 23, 2011

kde knetworkmanager is not starting on startup.i am starting this manually every time on login to connect to network..how to make it start automatically?

View 9 Replies View Related

OpenSUSE :: How To Start Stop Mysql Server

Feb 25, 2010

i am using putty to connect to my server and wanted to restart mysql server. searched the internet and found thatcommand is /etc/init.d/mysqld start or stopbut it did not worked.then tried /etc/init.d/mysql stop or startthis also did not worked.

View 6 Replies View Related

OpenSUSE :: The KDE Network Monitor Requires 3 Reboots Before Being Able To Connect To Wireless Network

Mar 10, 2011

After installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).

Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.

So I need to reboot again.

When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.

Now my wifi works fine.

View 1 Replies View Related

OpenSUSE :: MySql Won't Start / No File Mysql.sock?

Feb 5, 2009

I thought that the problem is in the phpMyAdmin not in the mysql. But now i think different. It seems that the problem is right in the mysql. I think that there was no root user, when mysql was freshly installed. Unfortunately i did everything i can find on internet (some tutorials) but they don`t helped me at all, maybe i fu**ed up the mysql service. So i reinstalled it, and when i want to start it there is no file mysql.sock and i get the following:

linux-nepg:~ # service mysql restart
Restarting service MySQL
Shutting down service MySQL done
Starting service MySQL warning: /var/lib/mysql/mysql.sock didn't appear within 30 seconds

View 9 Replies View Related

Ubuntu :: Start Synergy On Startup Wont Start Automatically On Server

Oct 13, 2010

Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:

[code]...

but still no dice.

View 9 Replies View Related

OpenSUSE Network :: Configure Firewall To Allow Remote Access To The Mysql Server?

May 31, 2011

I have a server machine that is running SUSE Linux Enterprise Server 11. I set up a mysql server there. Now I want to access this mysql server from my laptop. I used the following command,

> mysql -h 12.246.5.70 -u davidehs -p

I found if the firewall on the server machine is running, I can not connect the mysql server from my laptop. If I stop the firewall first, and the do the connection, I can access the mysql. how to keep the firewall running and allow the remote mysql incoming requests?

View 4 Replies View Related

OpenSUSE Network :: Configure Firewall To Allow Remote Access To The Mysql Server

Jan 28, 2011

I have a server machine that is running SUSE Linux Enterprise Server 11. I set up a mysql server there. Now I want to access this mysql server from my laptop. I used the following command,

> mysql -h 12.246.5.70 -u davidehs -p

I found if the firewall on the server machine is running, I can not connect the mysql server from my laptop. If I stop the firewall first, and the do the connection, I can access the mysql. Do you guys have any idea how to keep the firewall running and allow the remote mysql incoming requests?

View 11 Replies View Related

Server :: Why Mysql Automatically Logging In Without .my.cnf Or My.cnf Sections

May 16, 2010

I've checked and double checked that there is no user and password directive in /etc/my.cnf and ~/.my.cnf but it seems that every time I issue mysql it will drop me into the command line without prompting for a password or giving any pause. Of course, the only table I have access to when doing this is information_schema with read only on most of it and no access on the rest, but I was just wondering where else an auto-login style authentication could be coming from.

View 11 Replies View Related

Ubuntu Installation :: Cannot Start Mysql - "Can't Connect To Local MySQL Server Through Socket:"?

Mar 15, 2010

I am getting the following error when starting mysql using 'sudo /etc/init.d/mysql start':

Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in
Mar 15 16:33:56 MoodFishDev /etc/init.d/mysql[18317]: ^G/usr/bin/mysqladmin: connect to

[code]....

View 1 Replies View Related

Slackware :: Network Manager Do Not Start Automatically

May 2, 2011

I have Slackware64 13.37 and I install NetworkManager from Slackbuilds. The only problem is that I have to run rc.networkmanager when I do startx to see the applet running. Isn't suppose to be automatic?

View 9 Replies View Related

Ubuntu :: 10.10 Reboots Automatically As Soon As Shutdown Completes?

Dec 7, 2010

I've been googling my brains out looking for a solution to this. So far, nothing.

As the title suggests, every time I attempt to shut the computer down it instantly reboots the moment the internal fans stop whirring.

So far I've tried:

-shutting down via the terminal (this actually makes the reboot happen instantly rather than waiting for the fans to stop)

-looking in the BIOS for any obvious settings which may be causing this

-performing a dpkg repair

-Allowing "Proposed" updates in the Updater

-installing (slightly) older Kernel (2.6.35-22 as opposed to 2.6.35-23)

-installing newer (2.6.36) kernel

I know others are having this issue, but other threads I've read seem to have fizzled out with no conclusion. Has anyone managed to find a way to make this work if they've had the bug?

Any advice at all? Is it worth trying an even older kernel? Or an even older version of Linux?

View 1 Replies View Related

OpenSUSE Network :: Can't Start NFS Server With GSS Option

Feb 24, 2011

I can't start NFS Server with GSS option.I've added [URL] (example) principal via kadmin with -randkey option as mentioned at "6.4.8. Creating Kerberos Service Principals".After executing rcnfsserver start, /var/log/messages shows:"do you have a keytab entry for nfs/<your.host>@<YOUR.REALM> in /etc/krb5.keytab?"

View 2 Replies View Related

OpenSUSE Network :: Machine Refuses To Allow VNC Server 1 To Start

May 24, 2010

I have one machine (out of a couple dozen) that continues to refuse to allow "vncserver :1" to start. It is perfectly happy with :2 - :9 but tells me :1 is already running - yet ps tells me that there is no running
Xvnc instance.
What have I done here and how do I get that session back? I've cleared the /tmp/.X11-unix entries but that did no good. Could I have checked something in Yast that is launching an invisible session?

View 4 Replies View Related

CentOS 5 Server :: Start Jboss And Tomcat Automatically, When I Do Reboot The Server?

Sep 9, 2009

I have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?

View 1 Replies View Related

OpenSUSE Install :: Dell Poweredge 6800 Server And 11.3 - System Reboots

Sep 29, 2010

Has anyone got any pointers on how to get 11.3 installed on a Dell Poweredge 6800 server? System starts to boot from Linux DVD, the screen goes screwy and then the system reboots.

View 1 Replies View Related

Server :: MySQL Move Database / Server Doesn't Start

Nov 3, 2010

I'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.

View 6 Replies View Related

OpenSUSE Network :: Help_no Interfaces Shown In Yast-firewall - Dns Server Won't Start

May 1, 2010

This morning I was configuring a DNS server through Yast at home, I've done it once before (in another wireless lan)and it works perfectly. But this morning, after I clicked "start dns server now", everything freezed, and caps lock light on keyboard kept flashing. I rebooted laptop,it couldn't boot into run level-5 and there were few "skipped" items and "failed" items displayed.... Sorry I'm new to linux so I re-installed it this afternoon, and kept /home partition, formatted / partition.

Everything seems to be fine after re-installation, again I tried configuring a DNS server and clicked "start dns server now", but the same problem appeared, caps lock light kept flashing and I rebooted the laptop but fortunately this time it didn't fail on any items when booting

In Yast-Network Settings, I choose "use controlled with network manager", and I can connect to wireless router and browsing web, but there are no any interfaces shown in Yast-Firewall, and this time, after I clicked "start dns server now", nothing happens, dns server just won't start...

View 7 Replies View Related

Fedora :: F12: Can't Start Mysql Server

Dec 2, 2009

I've installed mysql server and starting it "service mysqld start"

I get:

Here is what get in "mysql.log"

View 2 Replies View Related

Server :: Cannot Start MySQL After Update

Jun 14, 2010

I cant start mysql of my server after the update. my operating system is centos. I get this error.
MySQL Daemon failed to start.
Starting MySQL: [FAILED]

View 4 Replies View Related

Server :: Start Squid Service Automatically?

Mar 14, 2011

When ever I reboot my server I always turn on the squid service. Is there any way that without giving command

Code:
#service squid start
my squid service should automatically start ?

View 7 Replies View Related

Server :: Trying To Get Radius To Start After Reboot Automatically

Sep 30, 2010

I have installed FreeRadius to a Debian Linux server.I have configured an account called Support to run the Radius as I didn't want Root to be the user to run this.I want Radius to start up automatically after the system is rebooted but I don't know how to do this. I am new to Linux so please bare with me. If the system is rebooted, is it possible for the Support account to be logged in automatically? Is there a script I can create to automatically login the Support account? This may not be secure but it has been requested. Also the main question is after a reboot can the Radius be configured to automatically start without the need for someone to login? So if the system is rebooted and then goes back to login prompt, can the Radius then be running?

I have had a good search about scripts but with my limited knowledge it isn't too easy.

After reading it also said something about using rc.radiusd which will automatically start Radius after a reboot, but again I cannot understand exactly what I need to do.Please can someone help out with this and let me know if I am on the right track? Will the start-my-radius.sh script work after the system is rebooted without someone actually login and how do I get it to work?Please explain clearly as this is all a bit technical for my liking and not understanding it well!

View 2 Replies View Related

CentOS 5 Server :: Set A Service To Start Up Automatically?

Apr 24, 2010

Ok, so I have installed apache 22, mysql5.0 and proftpd1.3. When I reboot my server, the above applications do not start up automatically, and I have been trying to figure out how with out much success. know that I need to make some changes inside the init.d directory on my CentOS Server.I am running CentOS 5.4 x86_64 build.I really am not sure how to accomplish the task or where to start.

View 4 Replies View Related

CentOS 5 Server :: How To Tell Qmail To Start Up Automatically

Aug 15, 2010

I am still pretty green when it comes to centos and linux in general. I have installed rpm and source packages before with little trouble by following the guides available on the support site and wiki for centos.I am running centos 5.4 on a virtual server.I followed the guide for installing vpopmail at URL...mailSince this is a VPS server I cannot install gnome and is why I opted for vpopmail + qmail.

The first issue I have is: I don't know how to tell qmail to start up automatically because after the install of qmail from source as the guide told me to, it did not place a startup files in the /etc/init.d, and I can't find any useful documentation on how to trouble shoot that.I try to use "chkconfig qmail on" and "chkconfig --level 345 qmail on" but both give me the error "error reading information on service qmail: No such file or directory"The version of qmail I am using is the latest 1.0.3, and the version of vpopmail is 5.5.

Vpopmail seems to be working just fine, as is the mysqlauth mod. I check the vpopmail database in mysql, and all the values I used for the domain and user show up there.The settings also show in the qmail configuration directory files for the domain.My first clue as to something being wrong was that when I send an email to the address I setup, I get nothing delivered on the server, but I also do not get any bounce backs or errors to tell me the details of what went wrong.At first I figured it was my firewall, so I disabled iptables.That did not fix it.I also tried disabling SElinux. That also made no difference.

View 10 Replies View Related

Debian :: MySQL Server Can't Start In Lamp

Jun 24, 2015

I installed LaMp 2 days ago. First everything works; But until yesterday, I can't start anymore mysql server : it failed each time.

When I look at the status :

Code: Select allsystemctl status mysql
Failed to get D-Bus connection: Erreur inconnue -1

It's like it can't generate mysqld.sock

Code: Select all/usr/bin/mysqladmin: connect to server at 'localhost' failed
error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)'
Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists!

I keep reading man and trying to find something I didn't configure correctly, but I can't find nothing.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved