Can one do something like ls|wc on a ftp-server? The ftp command set does not include wc.
I have uploaded lot's of stuff to a net drive and I would like to check the completeness of the files uploaded without counting them by hand.
been searching google and forums for about 5 hours now, and can't figure this one out, I have a server running opensuse 11.2 sharing various NFS directories, I have one laptop that is running 11.2 and I have no problem getting my NFS shares from the server.On my other laptop that is running 11.3, I had the shares working at one point, but changed things around and added a new HD to the server, now I can NOT get this thing to work, I have tried everything I could find to read on it. Started and stopped the NFS server and exportfs -a, and checked /var/logs/messages on server and nothing about this laptop (192.168.0.102 suse 11.3) trying to connect.On this laptop, I have deleted all the shares, and tried to re-add them but still get this error everytime.on server /etc/export:
/home/kryptic/ *(rw,no_subtree_check,sync)
/backup/Media/ *(rw,no_subtree_check,sync)
/backup/Dales_Backup/ *(fsid=0,crossmnt,ro,root_squash,sync,no_subtree_check)
[code]...
I am getting this error when trying to mount my client on the directory I exported in Yast2 NFS Server
View 9 Replies View RelatedThis continues a thread started in the applications forum:mc hangs temporarily when network is downmc (Midnight Commander) hangs on my desktop but not on my laptop. When I compared desktop and laptop configurations, I found the following differences:
/etc/hosts files:
Code:
Laptop: 127.0.0.2 linux-4xt8.site, linux-4xt8
[code]....
I want to compare zone file counting and same name, not records etc of master and slave dns server so that i sure both server contains same copy of the files at a time. Any utility to compare such files in linux?
View 5 Replies View RelatedIs there a way I can count inbound/outbound mails for a particular user? I'm using sendmail as MTA and dovecot for POP3.
View 1 Replies View RelatedI have change my mail server previous when i open my domain [url] it goes to [url].Now i have change my Mail server from openwebmail to Zimbra Server .so when i again open to it mail.mydomain.com ,proxy server takes to [url].
If i bypass proxy server then it open mail.mydomain.com(My zimbra Page).i have also updated internal DNS addresss But Squid not updating it
How to update Squid DNS Entry ? how to Update Squid Cache records?
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
I have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedI have an opensuse 11.3 install which I want to set up as a network boot server to install Solaris 10 on a Sun Ultra 10 client. According to what I've read, this requires rarpd and tftpd which I've set up on opensuse, but also bootparamd which I can't find for 11.3. It seems it was last included with opensuse 9.2. Does anyone know if it's available, if I could use the suse 9.2 version, or any alternative?
View 3 Replies View RelatedI am trying to network a drive which is a USB drive. The directory is /media/My Book and I am at a loss on how to network it properly. From my laptop that has linux mint, I click on network and I see SFTP File Transfer on linux-8m03 but it can never seem to mount.
View 1 Replies View Relatedhow to create network policy and system policy in opensuse11.4 and domain policies also???
View 1 Replies View RelatedI am working on Red Hat Linux since last six months and learning it steps by steps. like configurating ftp server,NSF ,DNS and then email server. I want to learn squid server but technically before going into it what you suggest me that may I first learn to configure Linux as a router,Firewall machine or do IP masquerading on a server. Because all these things are directly or indirectly involve in squid.So guide me because going to start squid i may understand Linux IP table ,how to add entries in it,how to delete entries ,I think you understand my point which i want to ask for guidence.
View 4 Replies View RelatedI've a question about how work dhcpd. I'm on CentOS 5.6. I has a dhcpd server on it. His configuration:
authoritative;
ddns-update-style none;
deny declines;
deny bootp;
option domain-name "mydomain.domain";
option domain-name-servers IP;
option routers IP;
option time-offset -18000;
#option ntp-servers IP;
subnet IP netmask MASK {
range IP START IP END ;
default-lease-time 86400;
max-lease-time 172800; }
And now in the /var/lib/dhcpd/dhcpd.lease file, there few entrie for the same IP. Sometime I've ten same entries for the same IP. Can I have only one entrie by IP? Is there any problems in my configuration of my dhcpd.conf file?
When I installed OpenSUSE 11.1 on my server, at some point, I gave the server a description. Whenever I connect to any of the shares on the server, this description appears. For example, on one Windows workstation, there is a share which appears in Windows Explorer as "Midwest on 'Cincinnati Corporate ISS Server (ISS0042)' (T:)".
For the life of me, I cannot find where this description, "Cincinnati Corporate ISS Server", is stored. I've search through /etc, and poked around ad nauseum in YAST, but I am missing it. Where is this description stored? What is the YAST function to change it?
How do you count the traffic on the interface, friends ?
I have a router for a medium-size LAN. HTTP-traffic goes through the transparent proxy, logs are parsed with Sarg, so that's the way I look how much megabytes my users 'do' daily.
Now I want to get rid of proxy, just to do sNAT. But I still want to know the daily traffic of my users (even in general, not for each user).
The router is run by Slackware 12.2.
I am loading variables for cXtXdXsX disk names into a script, and at present I have only accounted for there being 3 characters from c to t. I need to change it to a variable recognition so that it can count any number of charcters such as c1t , c10t , or c100t.
I can then take that information and use it with the following string to strip off the lead characters so as to make the 3 in $substr either a variable or redirect to multiple occurrences of raw based on the count returned.
sub raw {
$substr = substr ($_, 3);
$raw1 = substr ($substr, 0, -4);
$raw = lc($raw1);
}
how to count from the c to the t inclusive so I get 3, 4, 5, etc ...
For some reason, Skype starts up in two instances. How can remove one of them in KDE (4.4.4)?
View 5 Replies View RelatedI currently have an LDAP database on my Suse 10.2 server for managing authentication and controlling emails for my Cyrus email server. I use this setup to provide email functionality to my web and email hosting clients, as well as DNS functionality, and it uses the default LDAP database that was setup when OpenLDAP was initially configured. Email support is working wonderfully, I might add. I also tested and verified the use of an email lookup directory in two different email clients (Outlook and Evolution) so that I can tell one of my clients how to lookup the email address of users who are setup in the LDAP server, and it works beautifully.
However, I'd also like to be able to allow my clients to build a shared contact database that can also be used in their email clients so that they can share them among all of their users. Ideally, I would need to be able to allow each client to have their own database of shared contacts, and I assume this would be done by creating a new LDAP database for each client company (i.e. group of users) that can contain the list of shared contacts for any of that client's users. When they configure their email client directory settings, they would enter the base path to their database in order to retrieve their shared contact database entries.
In my web searches, I've found plenty of CRM solutions on the web that claim to provide this type of functionality, but I believe that OpenLDAP contains everything I need to make this work without adding another layer of software to the server solution. (I subscribe to the "Keep it Simple, Stupid!" approach whenever possible.) Essentially, I need to have People entries in a client's LDAP database that are NOT email users on the system. The fields in the standard people schema are all the fields they would need - as long as I can figure out how best to add these non-user entries in the LDAP database. Are there any potential difficulties in creating additional LDAP databases expressly for this purpose?
Are there any tricks to adding contact entries into a client's LDAP database without them also being current email users on the server, so that those entries can be retrieved through an Email Client directory lookup? I will also want to provide an easy method for my client users to add new entries to their LDAP contact database, most likely through a web interface for them that could then issue LDAP commands on the server based on the input fields for the new contact. (I don't believe this is possible from within the email client itself.) Is there any reason this could not be done with the proper configuration? What should I be aware of as I setup this contact management web interface? Is there a better way for non-technical client users to manage this list of shared contacts?
I want to set up the following server in open suse:dhcpopenldapnfs (to allow users to mount their home directories from the serverI started off with the openldap server. I configured it with dc=localdomain,dc=local as its domain. As the server machine has no internet. Though when I go to add a .ldif file with the following command
Code:
ldapadd -x -D 'cn=Administrator,dc=localdomain,dc=local' -f /home/base.ldif -W
It returns this
[code]....
I would like to write a shell script that displays the number of days, hours and seconds left until a certain date and time. What commands would I use?
View 6 Replies View RelatedI have done some searching around the internet and this site, but I haven't found a good way to count the context switches on a thread in a c++ program I am running. I need to know if it get swapped off of a CPU for correct timing.
View 4 Replies View RelatedIf I read in variables entered by the user, how can I check to make sure the correct number of variables were entered? For example, after reading in a data file and making it into an array, I have:echo "To check the data, enter the first element number, last element number and step size as x y z:"read x y z.It then goes on to start a loop, but what I would like now (before the loop) is a check to see if three variables have been entered, before the rest of the script continues.
I've tried specifying the variables as $1, $2 and $3, but if I echo $#, the value comes out as zero, so it's obviously not working.
how do i count the total number of cfiles in the project.My project is on a solaris machine what is the command that I have to run to know the total count of cfiles in the .pj folder.
View 1 Replies View RelatedI'm setting up a logging script to track utilization on our deployed systems. I'm running it every minute using cron. Each time it runs, I get an entry in /var/log/messages telling me it ran. That is a lot of useless information. Is there a way to prevent the creation of these log entries?
View 1 Replies View RelatedI have to hide Unix partitions to succeed in installing Linux and the winner is Ubuntu 10.10! I had to remove whole partitions entries. DOS based primary/logical partitions are now called (hd0,msdos1), (hd0,msdos2), etc. And BSD slices would have been (hd0, bsd1) (hd0,bsd2). I guess I saw those names during installation. update-grub failed in three attempts in a row on 2 machines (32 and 64 bit). Everything went fine after I removed the Unix partitions (which are going to be restored by openSUSE legacy Grub)
View 9 Replies View RelatedSince I updated from 11.2 to 11.4 an annoying bug seems to have crept into the shell.
If I type the following and hit tab I get:
cd ~/.kde
.kde/ .kde// .kde4/ .kde4//
i.e. each directory has a / and // version for some reason. I have to enter a / and hit tab again to proceed.
If however I type the following and hit tab I get:
cd /home/tux/.kde
.kde/ .kde4/
i.e. correct as expected.
The ls command does not do this.
This seems like a bug.
GNU bash, version 4.1.10(1)-release (x86_64-suse-linux-gnu)
openSUSE 11.4 (x86_64)
VERSION = 11.4
CODENAME = Celadon
Linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 x86_64 x86_64 x86_64 GNU/Linux
Somewhere out there there has to be someone that can help me set up my lamp server to send automated emails using my cable providers SMTP server
View 2 Replies View RelatedI am working on building a customized ISO image of a server based on linux. The thing is after the server is installed and run for the first time, three users have to be created for the various services to run properly. I want this to be automated. To achieve this what is was thinking is automatically enter the user entries in the /etc/passwd and /etc/shadow files through init scripts when the server starts for the first time after the installation. I tried creating user and assigning password in one of my machine, and the /etc/passwd and the /etc/shadow entries of this user I copied it into the other machine and tried login in on the other machine and everything worked fine. How I am trying to achieve this.
View 1 Replies View RelatedI am trying to find the word count of a specific word in a collection of documents, in Linux.
I have tried with grep and ack-grep in combination with wc but I can't seem to come up with a valid combination of pipes :)