OpenSUSE :: Remove Entries From KDE Startup?
Sep 23, 2010For some reason, Skype starts up in two instances. How can remove one of them in KDE (4.4.4)?
View 5 RepliesFor some reason, Skype starts up in two instances. How can remove one of them in KDE (4.4.4)?
View 5 RepliesI have to hide Unix partitions to succeed in installing Linux and the winner is Ubuntu 10.10! I had to remove whole partitions entries. DOS based primary/logical partitions are now called (hd0,msdos1), (hd0,msdos2), etc. And BSD slices would have been (hd0, bsd1) (hd0,bsd2). I guess I saw those names during installation. update-grub failed in three attempts in a row on 2 machines (32 and 64 bit). Everything went fine after I removed the Unix partitions (which are going to be restored by openSUSE legacy Grub)
View 9 Replies View RelatedThe only MS program I need on my computer is Word 2007 for the equation editor to write/edit files from work. So after installing Wine I installed MSOffice2007. Excel worked OK (although I don't need it - I am perfectly happy with the Libre Office spreadsheet). Word however froze each time so I tried to uninstall and reinstall it. However I always got an error message when trying to uninstall with Wine. So I followed the advice of some strands in this forum and deleted the Program Files folder from the ~.wine directory. However the menus are still in Wine/Programs/Microsoft Office even though they lead to nowhere. I tried to reinstall but still I nothing happened. I presume the old entries still lead to the position where previously the .exe files were located. Now my question is either how can I remove these menu entries and try installing again - or even better - is there a Linux programme that can read/edit the equations written in Word 2007?
View 4 Replies View RelatedI have Googled this one and I have tried several fixes so far nothing has worked. All I want to keep is these entries in my grub menu:
"Ubuntu, Linux 2.6.31-19-generic-pae"
"Ubuntu, Linux 2.6.31-17-generic-pae"
"Microsoft Windows XP Professional"
1st - Through Synaptic I removed:
linux-headers-2.6.31-14
linux-headers-2.6.31-14-generic-pae
linux-headers-2.6.31-15
linux-headers-2.6.31-15-generic-pae
[Code]...
In Xubuntu, the xfrun4 dialog (alt + F2) doesn't have auto-completion for every command, only for those commands successfully called at some previous point in time. My question is: where are these entries located, and how can I remove some of them?
I'm just curious because I'd like to keep my entries uncluttered. I was experimenting earlier to see whether xfrun4 would retain an invalid command, so I tried the inexistent (so I thought) command "terminal", but lo and behold, it opened a new tab in Firefox and brought me to www.terminal.com. Now I have the useless command "terminal" saved in xfrun4, and I'd like to get rid of it.
we have a variable LIBS:
LIBS='-lpq -lmysqlclient -lssl -lpthread -lresolv -lssl -lpthread -lresolv'
I'd want to get:
LIBS='-lpq -lmysqlclient -lssl -lpthread -lresolv'
Bear in mind that LIBS can be variable, I mean I need to drop any duplicate and only retain the last one of each different entry. And we must keep the order as is, I must not sort out them.
So, if LIBS is:
LIBS='-lpq -lmysqlclient -lpthread -lresolv -lpthread -lresolv'
I need: LIBS='-lpq -lmysqlclient -lpthread -lresolv'
I'm trying to automatically remove some of the old GRUB entries that pile up after a few updates and just want to leave live 2 or 3 there along with my Win7 entry. I was looking and saw that there is a utility for Ubuntu but I couldn't find anything for Fedora.
View 7 Replies View RelatedHow can I remove entries manually that were automatically generated by grub 2? I have the scripts I need to add my entries, but I don't want the osprober to keep adding new entries. Even if I make the 30_osprober script non-executable, the entries are still there. Can I do this without "breaking the rules" and editing the grub.cfg file?
View 2 Replies View Relatedi have an entry in grub that i don't use at all "Windows recovey " and i want to know if there is a way to remove it or just hide it i have an other problem is grub confuses some partitions names so is there a way to rename them
View 3 Replies View RelatedI am not good with the X, How to remove/add entries to the "Application" menu? I am running lucid. BTW, I do not find "/usr/bin/application". Also I do not find "Application menu Editor" under Application -> System Tools. I searched with aptitude and could not find a package relevant for "Application Menu Editor", may be I used wrong keywords.
View 1 Replies View RelatedI am trying out Xubuntu 10.04 but after I installed "Gnome-desktop" package to include gnome support I now have duplicated entries on my start menu. Does anyone know how to purge these duplicates? (a terminal based de-duplicating command would be very handy).
View 3 Replies View RelatedI'm having trouble removing entries in gconf-editor (GUI).
I have searched everywhere: manpages, internets, forums, can't find anything related.
Here's the situation: I installed Avant Window Navigator and it naturally created entries in gconf-editor for interface, applets etc. The thing is that when I uninstalled it the entries are still there, and yes I have deleted the corresponding folders in home/.gconf/apps. Also did a search of my filesystem for awn, avant widow navigator, avant-window-navigator etc and nothing came up. Looked in /etc, nothing. Looked in /etc/gconf, also nothing.
I am trying out Xubuntu 10.04 but after I installed "Gnome-desktop" package to include gnome support I now have duplicated entries on my start menu. Does anyone know how to purge these duplicates? (a terminal based de-duplicating command would be very handy).
View 1 Replies View RelatedI have a huge (over 10 gb) file with a list of IP's each followed by a corresponding number like this:
Code:
12.32.34.23 10
143.32.34.543 11
232.32.45.65 12
54.23.5.232 13
143.32.34.43 14
and so on..
I'm trying to sort this file numerically and weed out any duplicate IP addresses. How do I do this on bash? I have come up with this but obviously it does'nt work.
Code:
$sort -n myfile.txt | cut -f1 | uniq -u
Take a look at the "screen shot attachment" you will notice that I have multiple listings for the HD - WIN_XP, WIN_7 and GAMES. I was checking out both NTFS CONFIGURATION TOOL and MOUNTMANAGER. I Removed MOUNTMANAGER but the multiple listings remain? I would like to have the ability to Mount and Unmount any drive from the File Manager except ARCHIVE this drive I need to mount as Ubuntu Boots up.
keivn@kj-desktop:~$ sudo fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
[code]....
I'm running Ubuntu 9.10 dual booted with Windows XP. Ever since I installed 9.10, I get a long list of OS's (actually, multiple repeats of what appears to be the same Ubuntu install), and I can't get rid of them.I've looked through various tutorials and the GRUB 2 Community documentation (https://help.ubuntu.com/community/Grub2) but I still can't get rid of the menu items.I edited the 40_custom file and was able to add the entries I wanted to see, and then chmoded 644 all the other files in the /etc/grub.d directory and run update-grub.The custom entries do appear at the end of the menu now, but the old entries are still there as well. This is what I get when I run the update-grub:
Code:
yoodle@HANSOLO:/etc/grub.d$ sudo update-grub
Searching for GRUB installation directory ... found: /boot/grub
[code]....
I've got a dual boot PC with windows 7 & Ubuntu. I had installed Ubuntu 10.04 & recently upgraded it to 10.10. Now I have these entries in the boot menu.
Ubuntu with linux 2.6.35-22-generic
Ubuntu with linux 2.6.35-22-generic (recovery mode)
Ubuntu with linux 2.6.32-21-generic
Ubuntu with linux 2.6.32-21-generic (recovery mode)
Memory test (memtest 86+)
Memory test (memtest 86+, serial console 115200)
Windows 7 (loader) (on/dev/sda1)
First & second entries listed above don't work. How can I remove them safely?
I have so many entries in GRUB and have to actually scroll down so much to see windows entry. How do I remove unwanted entries in GRUB? Also How can I make a background picture appear when grub manager comes up?
View 9 Replies View RelatedI installed Ubuntu in a dual-boot with Windows 7, and installed the bootloader (GRUB? However, I have some weird Windows XP Embedded entry! I also have a lot of different boot options for Ubuntu. All I want is my Windows 7 entry (picked up as Windows Vista) and my main Ubuntu entry. How can I edit the bootloader entries (remove some existing ones, not adding any) so I have only two on there?
View 4 Replies View RelatedI have a grub menu with a ton of old kernel entries that I want to delete. I've scoured this forum, and haven't found anything that works. I've tried:
Code:"the easiest way to get rid of old kernels from grub is to uninstall the package, the post-install scripts will update grub
for example my current kernel is:
uname -a
Linux hemma 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:02:15 UTC 2009 x86_64 GNU/Linux
then remove older kernels found in /boot like this:
sudo aptitude remove linux-image-2.6.31-15-generic" When I tried that, the output showed the package being removed, but nothing was removed from the grub menu. I tried running the kernel I supposedly removed, and it wouldn't start, which is promising, but how do I get it out of the grub menu? I've also tried using Synaptic, but that didn't work either.
I installed WINE, and decided to remove it after installing something, I was unable to uninstall, so I just removed WINE, now, I have the program stuck in my main menu. I deleted the path and stuff, but it's still there. How do I get rid of it?
View 2 Replies View RelatedIs there any risk to deleting program entries from gconf-editor? It's very busy with software I'veuninstalled, which makes it fractionally harder to find entries when I want to edit them.
View 1 Replies View RelatedOne of the default entries in the list of Startup Applications is "GSettings Data Conversion". Do I want it or can I turn it off and leave it off?
View 2 Replies View RelatedI've searched for specific entries, bluetooth, Bluez, etc. with no luck. Minor detail but...
View 1 Replies View RelatedTheres two main things im trying to remove. First, Wine which I need to keep, has about 15 different entries which I want to remove. Second I installed OpenMPT, a music tracking program through Wine. This added about 10 duplicate open with entries.. I uninstalled OpenMPT, because I decided I didnt want it, but all the entries remain.
When I highlight one of the entries, the remove button is still disabled. Its disabled for Wine, OpenMPT, and every other program in the list.
How can I remove these?
Okay, two packages in question here: sshd and xrdp.
In the /etc/rc.d/rc5.d directory there is a K??sshd link, I'm not really sure why the default is to kill sshd in graphical mode, but it's there. I saw it coincidentally when I went to add an S??xrdp link so that I could have xrdp run when the computer starts. I restarted the computer, and of course, couldn't connect via my Windows Remote Desktop client. A quick ps -e | grep xrdp in a terminal window showed me that xrdp had not, in fact, started.
I hop back in to ??/rc5.d to see if I messed up creating my link and poof. there's no more S??xrdp link, furthermore, the K??sshd link that I had removed was back.
Okay, so Fedora doesn't like you messing with the init links manually... I can dig it, cause there's this nifty gui tool to manage startup items... I go in to that and add entries for sshd and xrdp, calling them via their init scripts so I can make sure everything plays nicely... then restart.
Oh, wait, still no xrdp or sshd running.
If I manually start these servers using their init scripts from a terminal they run fine, no issues, but I don't want to do that, and I think we can all agree that I should't have to. What am I doing wrong? What is the 'proper' way to add servers to the startup process and since entering runlevel 5 apparently kills sshd, how do I prevent that?
Karmic - When I start up and log in, a window for KDE Desktop Sharing Invitation automatically pops up.
Closing it doesn't prevent it from popping up on next startup.
There doesn't appear to be any option to "Don't show on startup."
When I go to System -> System Settings -> Advanced -> Autostart, it does not appear under Desktop File. The only thing that appears under "Script File" is gtk-2-engines-qtcurve.rc.sh gtk2engines... which does not appear to be the issue.
I'm guessing there's a shell command that will give me a more in-depth look at what should and should not run upon startup? Would really like to startup with a clean screen!
I have installed mysql server on my Ubuntu Lucid AMD64 desktop. I need to run this service only on need. So I prefer not to have this in startup. So I did the following -
1. Deactivated the row entry by name "mysql" from application BootUp-Manager.
2. Run the application sysv-rc-conf and unchecked the checkboxes for all run levels.
3. Run the command "sudo update-rc.d -f mysql remove". Execution completed successfully.
4. Run the command - "sudo service mysql stop". In return I got a message "mysql stop/waiting".
5. Restarted the desktop.
Now when I read through the task manager, I still see a process by name "mysqld" running. I ran the command as mentioned in # 4 above and got the same response. I wanted to know how do I turn off mysql service running from startup permanently. But I still need to run it as and when required.
I am running Unbuntu 10.10 on a HTPC, and also XBMC. With some effort it worked ok, sounds, remote etc. Via systems>preferences I managed to add XBMC to the startup. It now starts when I start the PC. However it sort-of hijacks the PC, so the WiFi does not start among other things. Also I am no longer able to log into the desktop, so I am not able to emove XBMC from the start-up of the computer. If I exit XBMC I get to the log-in screen for the desktop, but when I log in it starts XBMC directly.
How can I remove it via the terminal? I cannot find a .config directory, any autostart, any .xsession, .xinitrc or anything else that looks like startup-script. How can I get access to my desktop again?
when I start my redhat 4, there are always two xterm prompts. i just want to see a clean desktop when I start up. I checked my rc.local and .cshrc file. there is no clue on it. remove these two xterm?
View 9 Replies View Related