OpenSUSE Multimedia :: Image Mounting Program To Alcohol 120%
Dec 12, 2009Could someone give me the name of a program similar to alcohol 120%
View 4 RepliesCould someone give me the name of a program similar to alcohol 120%
View 4 Repliesis there a way to mount a bin image file? The bin image file contains video files, it's not an executable file.
View 3 Replies View RelatedI expect this the right forum although I don't hope anybody will answer the post. Nonethelesss, here it goes: what is the best chemical agent to rubber the pcb with? I know. Get a new keyboard. They're cheap. Yes, cheap and bad. What exactly do I mean by 'bad'? Mainly, the mechanical response of the key to a pulsation by the finger. In this sense, and as far as I know, the spring mechanism of keys is much better than any other one, except for piano keys. I'm thinking of IBM data entry machines of the eighties. And may be there ARE high quality kbd's out there... but a high-end products are likely to be expensive.
Please notice this pcb is not like the flexible ones nowadays in use. I'm speaking of a kbd from the nineties so, it is a hard board with the copper tracks and pads on one side of it (phenolic, I think). And it is the pads I need to clean (meaning rubber with a cloth, not brushing, humidified with the chemical) in order to resurrect the kbd. I've done this, using isopropyl alcohol, a couple of times and with acceptable results. But isopropyl seems to me kind of a universal recipe. I was wondering about the action of other solvents in relation to my kbd pcb.
I'm trying to use the most-base install of opensuse 11.4 and so i'm using the text-only interface. I looked up some guides on using the 'mount' command but I'm encountering problems. I tried doing.
mkdir /tmp/flash
su
mount /dev/sdb /tmp/flash
but first off, I don't even know if sdb is my flash device, there's ~60 things in my /dev/ directory, and ~10 things that look like 'sdb' but I try anyway, and I generally get an error telling me that either /dev/sdb is busy, or /tmp/flash is busy but I wanted to check here and clarify first, how do I even know which /dev/ item is my flash drive? When I plug in my flash drive, no less than 3 new entries appear in /dev/ so, I'm a little confused. What do I do?
I want to mount a (.iso) CD-image under Linux (I am using Ubuntu). I know that I can do it with mount using the loopback device, but for that, I need to be root. Is there any way to do it with user privileges?
View 3 Replies View RelatedI have a dedicated server that Ubuntu 9.04 operating system has been installed on it. Before this dedicated server, I had another server that according to some reasons, it was put aside and I requested my datacenter support team to attach previous server's HDD to my new server in order to transfer its information to the new server's HDD. On the disks of previous HDD, Ubuntu 8.04 LTS OS had been installed and most of its capacity was full, but while I mounted that HDD on the new server, the contents of the primary partition were visible but the contents of the extended partition weren't visible. After some inspectings, I observerd that the extended partition type is converted to LVM. Before this, I didn't deal with this kind of partition. I tried to mount this partition but I failed. I read many articles about this problem and implemented instructions on the HDD but the LVM partition was never mounted that returns many different errors and even I pursued the reasons of this errors but non of these remedies didn't solve this problem. Since the datacenter had determined a specifies time for transfering information. then I had to return the SCSI HDD on the specified time, so I was forced to make an image of the hard disk by "TestDisk" software. I've made that image from the LVM partition which its capacity amounts to 150 GB but still I'm not able to mount the image according to instructions on the different related websitres. Since I'm really dummy in Linux Fle System field, I request you to help me to mount this image or extract its contents.
View 1 Replies View RelatedFor instance, using dd, you create an image of a whole hard drive, all partitions. The script then comes and mounts the partition located at offset 63 (or whatever the user picks).I do not see this option in the mount command.No other searches turned up anything meaningful. So I am bowing to the gurus.
View 4 Replies View RelatedI wanted to know if it is possible to mount an ISO image to a partition and boot from that instead of a CD or DVD. I know it is easy to do it from a CD but I would like to know if I can also do it this way.
View 3 Replies View RelatedI installed Fedora 12 in a virtual environment using VMware workstation, I am learning a Linux book. 1. The book ask me to change my directory to Fedora 12 DVD's RPM file directory under terminal. It assumes the mounting point for the disk image would be e.g. '/media/dvd/packages/', but if I type in 'cd /media/dvd/packages/' it obviously won't find the directory. So how do I navigate to the directory using CD command, but I guess put it more accurately I will need to find out what is the mounting point of the Fedora 12 DVD image in my VM.
2. I have another question with my root password, I cannot login as root when the VM first boot up, at the login screen where you are asked about your account name and password screen, So I have to use my normal user account (made up by my first name and last name) when I installed Fedora. But I know exactly what my root password is. The weird thing is I can still access to the root account in the desktops windows environment no problem. e.g. if I go to the top bar 'system-administration-authentication' program, it will let me in after I typed in my root password. In other words, I have access to all the admin tools in the desktop environment.
I downloaded an raw SD card image that has two partitions. It caused some file system errors when I tried to dd it directly into an SD card. I am not sure if the card is defective or the image. Is there a way to examine this image without writing it to a physical card? Like trying to mount the partitions separately or checking the tables?
View 2 Replies View RelatedI have a gziped dd image backup of my entire hda drive (osx and ext4 partitions) that I created with the following command:
dd if=/dev/sda |gzip > image032810.gz
Can I mount this image file to pull off individual files from individual partitions?
I'm trying to mount hg2.iso, the Heavy Gear 2 iso image that I converted from hg2.nrg using nrg2iso, and this is what I keep getting:
Code:
bash-3.1# mount -o loop -t iso9660 hg2.iso /mnt/iso
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try demsg | tail or so
I use Lenny, and was trying to mount a .iso image, supposedly a cd imagem.
[code]....
This is what I get from dmesg | tail:
debian:/home/zac/cscd# dmesg | tail
[ 1811.505199] floppy0: disk absent or changed during operation
[ 1811.505207] end_request: I/O error, dev fd0, sector 0
[code]....
I did a little research on the web and it seems that this file is not really a cd image, but simply data in a .img file. What do you think of that?
debian:/home/zac/cscd# file cscd3.iso
cscd3.iso: data
Some people recommend to extract the data via the dd command, but it didn't seem very safe for me to do that!
[URL]
is it possible to extract the data into a directory (instead of a device) using dd? This file is supposed to be a software. I wanted to run it on wine by keeping it mounted on a mount point in my file system. Does it make any sense to try to do this if the file simply isn't a cd image?
When playing dvd's, vob files and wmv files, the image comes with high contrast colors ,very intense red/green/blue. very dark too. I have vlc 1.1.4 installed, using ubuntu 10.10, libdvdcss2 installed. for the rest of the video formats it seems to work fine. any ideas on what should I start debugging?
View 5 Replies View RelatedWhen K3B is creating an .iso image to file and fails to read a sector even at the very end of a DVD it issues you a warning and removes the file from the destination folder, regardless of what choice you made in the "remove file when completed" dialog.
I want it to leave the incomplete .iso image there so I can play with it, any suggestions cause I've searched scratched and dissected, trying to do my homework but doggone if I can figure it out,
I have recovered a whole dying hard drive using the command ddrescue, only 8192 byte out of 4.3 gigabyte are unreadable.I have used the command (gnu) ddrescue /dev/sdb DiskImage.img..But unfortunatly this way i have a full-disk image that is not mountable... ( or at least i don't know how to mount it ), and the disk doesn't seem to work anymore that good... ( crack crack crack... ).To see the partitions inside the "big" file, i have used fdisk -l, and damn there is only one partition, but how can i mount the content???
I know i could use photorec foremost or similar software, but since the disc image is almost perfect, i would be able to preserve file names, paths and dates...The last idea would be to mount it as a full-drive image with Virtualbox... But transferring data would be quite annoying.
I removed gxine and got this message.
Code:
Continue? [y/n/?] (y): y
Removing gxine-0.5.905-0.pm.2.9 [done]
There are some running programs that use files deleted by recent upgrade. You may wish to restart some of them. Run 'zypper ps' to list these programs.
what program can i use with opensuse to broadcast live music , i was using IDJC with suse 11.3 after updated to 11.4 IDJC will not work .
View 4 Replies View RelatedFirst of all, in whether I have interpreted this correctly: [url]
Where we want all users to be able to restore backups. This involves nfs exporting and mounting the backup directory ON THE SAME MACHINE, no...?
I have been trying to fix this all day, and can't figure out why its not working.
All my /etc/fstab /etc/exports /etc/hosts.allow /etc/hosts.deny must be correct as the file mounts (after booting, but NOT ON booting) with:
All the necessary (I think) services are starting on boot:
On bootup I receive the error:
Code:
I have other filesystems mounted from another server which all mount fine. Its just this one.
is there any program to see video without X as mp3blaster to listen music without X?
View 4 Replies View RelatedTried kungfu ripper, is supposed to rip dvd's to theora. Great. Program hangs and stops. This is from Packman repo, not factory.
[Code]...
How to get image from webcam by linux c or c++ program? I have a netbook which comes with a webcam, however, how to identify it to be which device file in /dev? Is there any bash command to detect this?
View 3 Replies View Relatedi have recently learned how to make backups of my psp games but for some reason they won't play them in iso format only cso (not suprisingly since everyone encourages the use of this format) is there a program out there thats easy to use, can someone show me how to use it i downloaded and installed ciso but haven't figured out what makes it tick
View 1 Replies View RelatedI am trying to install Fedora 12 x64 on my 27" iMac 10,1. I have tried both the installation dvd and the gnome live cd (both x64 i did not try the x86). On the installation dvd I get as far as the menu giving me the boot/install options - I have tried to install both with a basic video driver and the regular install/upgrade option - both times it begins loading components for the installer program (/sbin/loader) etc. After it loads sbin/loader and mounts the partitions it freezes with half the screen being the terminal txt beforehand and the other half being just a standard fedora logo w/blue background. It is not much different when I try the live-cd the only different is it does the exact same thing when the timer for automatic login is done. Any possible command line arguments that I could use to stop the graphical corruption?
View 2 Replies View RelatedI am looking for a program just to film and eventually save (this is not very important) from my webcam.
View 3 Replies View RelatedLooking for jpeg image manipulation program
I was wondering what is available in the Linux world that would allow me to combine two or more jpegs into one grid-based image. I want to upload some images to an online auction and would like to combine them beforehand.
Haven't looked through Synaptic Package Manager yet.
I am having a problem finding a piece of software. I've searched a lot and still have not come up with an answer. My situation is as follows: I have an image file the I wish to restore to my USB flash drive but so far I've had no luck doing this. I was wondering if there was a program/command that could help me restore the disk image.
View 4 Replies View Relatedthere i have a computer running ubuntu 9.10 set up as a server in my classroom. I have ftp http and an internal mail server set up on it as well as other settings. I really want to make a copy of the system so i have a back up of the os. i have figured out that i can attach a hdd to the computer and copy the os via the command line with an ubuntu live cd but this only works as long as the computer that is receiving the backup is exactly the same or the same computer. I would like to transfer the image to a portable hdd then install the os onto virtual box ( a virtual machine). Is there a way to do this without buying expensive software.dose ubuntu 9.10 have a product similar to Norton ghost.
View 5 Replies View RelatedWhat is good program and that is easy to use to make a image of a linux partition
View 3 Replies View RelatedJust purchased a webcam and it worked immediatelly with kopete. This was in the configuration dialog, a small window showed me moving around in all my gloriousness. Now realise why those horror films show this sort of footage.
Thing is: how to make the image bigger, fill the screen? Is there a program? Don't say rtfm, I don't know enough to do that.