Ubuntu Multimedia :: Logitech C210 Built In Microphone Not Working?
Sep 22, 2010Logitech c210 built in microphone not working?
View 5 RepliesLogitech c210 built in microphone not working?
View 5 RepliesI am using a MSI GX630 Laptop with Xubuntu 11.04 installed. I am attempting to use a logitech H230 headset (here) which works fine on other computers running windows but is now not working in Xubuntu.
when plugged in, the headphone work, but skype does not record any sound from the microphone.
I am happy to provide any additional information I can, hopefully someone can help me.
I am studying abroad in Sweden and need my microphone working to speak with my family in the states. I also have an internal microphone which is does not seem to be working (thread here)
I have a problem with my built-in microphone in ubuntu 10.04, its not listed in mixers like other notebooks that have anologue microphone 1 / 2, I have only Analogue microphone (that works only with external mic), analogue line-in and analogue input. Also I updated Alsa drivers to 1.0.23, but nothing changed.why my built-in microphone is not listed by mixer, is not view at all?
Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02), Packard Bell EasyNote MX67-P-023, Adi1986a
I recently installed GUVCView to record videos via my webcam but my built-in microphone isn't working. Is there a driver for mine? The computer is an HP G60-530US, and the sound card is a Conxenant audio card and the webcam is a Chicony HP Webcam-101.
View 2 Replies View Relatedwant to use it with skype. Didn't see a driver online; followed instructions for making changes in vol ctl, didn't see anything wrong.
View 3 Replies View RelatedJust found my old Logitech webcam again, and tried to get it to work on 10.04. Somehow this doesn't work. I tried searching the forum, but did not get an answer to my situation.
Here is what I can see:
After connecting (or rebooting), dmesg shows the following lines
uvcvideo: Found UVC 1.00 device <unnamed> (046d:08cc)
input: UVC Camera (046d:08cc) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input5
usbcore: registered new interface driver uvcvideo
And that's it. No message that cam was registered to /dev/video<x>. I should add that I already have another cam (Philips) that works and is registered to /dev/video0, and I also installed a Hauppauge PVR350 card that also gets registered to various /dev/video<y> files. Why the Logitech cam won't register? I'm guessing I can't do anything until this cam has its own /dev/video<x>, right?
I upgraded recently to Ubuntu 11.04 and have been trying unsuccessfully since to use an old webcam: Logitech Quickcam Messenger. The system doesn't recognize it at all as far as I can tell, which it did on 10.10 (I didn't really use it then, I just remember I could get a picture at some point.
View 1 Replies View RelatedI have a Dell system with a Dell SP2309 monitor. I have been told it's supposed to have a built in webcam and microphone. How can I chek to see if this is true and if so...how do I get them to work?
View 3 Replies View RelatedI have kubuntu 10.10 installed on my laptop (kernel 2.6.35)
My laptop model: VAIO-VGN-AR870NB
My previous problem with my webcam just solved .
but now I have a new one ....
I cant use my microphone in skype
and I don't know how I can test it whether it works or not ... you know ... to see it's a driver problem or not code...
It has been a long time i dreamed to get ubuntu and now i have my ubuntu 10.04 installed. I found similar posts in the forum but no one helped me out. i have a webcam Logitech quick cam pro 9000 and i tried to use it with skype 2.1 beta 2 i installed this morning. Well i can see the video but the microphone (build in the webcam ) does not work at all and it worked fine with windows. This is the lsusb command in the terminal :
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 046d:0990 Logitech, Inc. QuickCam Pro 9000
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
So i think the webcam is connected well.
I am running Fedora 10 on my laptop. Recently I installed Empathy to use voice chat on Linux, however, Empathy does not detect the laptops built in microphone! I have checked the audio settings and found that the mic is enabled. I know that the mic is working as it works fine when I am booted onto my Windows partition.
View 9 Replies View RelatedI can't seem to get my microphone working. All the levels are maxed, nothing is muted. I've checked pavucontrol, alsamixer, and sytem-preferences-sound, but according to all that, there is nothing muted, and all the levels are maxed. I'm running ubuntu 10.04. My mic works fine in Windows vista, but not in Ubuntu. I am thinking I may need to update my drivers or something. Also I've gone over the forums but haven't found a solution that works, many of them involve changing the levels in system-preferences-sound, but again, that doesn't work. I've posted the results of aplay -l [URL].
View 1 Replies View RelatedI have on my Asus x59sl laptop webcam with built-in webcam. Here is the lsusb output:
Code:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b012 Chicony Electronics Co., Ltd 1.3 MPixel UVC Webcam
Bus 001 Device 005: ID 0bda:0116 Realtek Semiconductor Corp. Mass Storage Device
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code].....
I have a asus g50v laptop with a built in webcam and microphone running ubuntu 10.04 32 bit and its not detecting the webcam / microphone
View 12 Replies View RelatedI've been trying to get my webcam microphone working in flash on Kubuntu 9.10.I have a Logitek Pro 9000, and video and audio work in other applications (skype), but video is all that works in flash (I have flash 10 installed). In the flash settings, it lists the only microphone option as "Linux Microphone", which does nothing. This seems to be a common problem, with a few solutions offered.
One I've tried, which seems fairly straightforward for gnome users, is here. However, whenever I run pavucontrol, I get an error reading "Connection failed: Connection refused".Does anyone know how to either get pulseaudio open, or how to get the microphone working in flash without it?
I Have a mike that will not work. Period. I have tried to record audio with both Sound recorder and Audacity.
View 1 Replies View RelatedI had difficulty getting my internal microphone -
p { margin-bottom: 0.08in; } card 0: SB [HDA ATI SB], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
I was able to get it to work in the Sound Recorder Application and in the System Testing function, but when I do the Skype Test Call, or call someone with Skype, while I can hear the other person perfectly well, my microphone does not appear to work at all, so it is a strictly one way conversation.
I've made sure with the ALSA Mixer that everything is turned on, and all my sound settings are fine, but microphone won't work in Skype.
Mp3s are playing nicely, so does the test sound with Yast. I copied some outputs which you might need to help me figure out whats wrong with my settings.
The motherboard has an onboard sound chip (which I do not use), and I am actively using the PCI sound card (Aureon 5.1, CM8738).
The microphone is coming with the webcam Logitech E 3500 (which worked under 11.1, but updating to 11.2 keeps me without skype functionality).
I have had trouble with my sound since installing. I have been able to get output sounds to work by setting my sound output to:Internal Audio Digital Stereo (IEC95 instead of:However, my microphone does not work. I know it was working earlier on but I can't figure out what the settings were at that time.Are there any ideas on what I can try to get the input and output audio working correctly?
View 1 Replies View RelatedI'm running 9.10 and I've being using skype for months with no issues, but today my microphone isn't working. I've tested the physical microphone on another machine and it works fine. I've tried skype, sound recorder and neither gets any input. I also have webcam and the microphone on that isn't working either.
View 2 Replies View RelatedI have a HP Pavillion dv4 1313dx that has been running Ubuntu Lucid Lynx 10.04 wonderfully, but I am getting nothing out of the microphone.
I am a VERY beginning user (All I really know how to do in terminal is copy/paste, cd, ls, and, chown) and if I can fix this easily, I'd love it.
I already know to check the sound preferences, and nothing is picked up on the microphone, but I think it's there.
The microphone of my laptop doesn't work, I'm on a HP Pavilion dv7 and neither the build-in or a microphone plugged in works.
I tried many things (like this: https://answers.launchpad.net/ubuntu/+question/78574) to get it work, but none has worked. But I'm quite sure it worked in some earlier ubuntu version.
I'm running kubuntu so it's not a problem in pulseaudio.
Can anyone please help me with this, because I really hate it I have to restart in windows every time for the mic. code...
I updated my ubuntu today from 10.04.1 to 10.10 and my microphone stopped working. There is no connector option in the input tab to choose the microphone. I checked everything in alsamixer and still nothing. I had no problems in 10.04.1.
View 9 Replies View RelatedI'm running Xubuntu 10.10 on an ASUS Eee 1215T; the sound hardware on the system is a Realtek ALC259, and there's also sound output through HDMI with an ATI RS690/780 HDMI chip (both according to alsamixer). I was recently fiddling with the sound settings to try to get sound output through the HDMI port. I was successful in that, but I can no longer record sound using the built-in microphone. I'm pretty sure this is something I messed up, since sound recording worked correctly when I first installed Xubuntu, but I'm not sure what I need to do to fix it. I've tried all the promising-looking settings in gnome-volume-control and xfce4-mixer to no avail, and alsamixer also shows everything, both playback and capture, at 100% volume and un-muted; alsamixer also shows that the capture is turned on. I only used these tools (gnome-volume-control, xfce4-mixer, and alsamixer) to get the HDMI output working.
View 8 Replies View RelatedThe problem i'm having is that my microphone stopped working after the upgrade to 10.10. Ubuntu doesn't seen any sort of input device any more, no line-in , no mic ( front as back ).Own on to the specs of my machine:It has a realtek ALC861-VD audio chip.2 mic jacks, 1 line-in , 2 out (front and back) and a coaxial port thing .The os is a upgraded from 10.04 to 10.10 and everything except this and my tv card sound works.I have pulse audio tools and alsa mixer ( although it broke during upgrade ) installed.alsa info is available upon request, so is any other info may you need it.
View 7 Replies View RelatedI've tried to look for a solution for a few days now, and haven't had any results so far. I really hope you can help me so I can get to talk with my girlfriend.I'm running Lubuntu with 10.04 LTS, and alsa version 1.0.23 on Samsung NC10.Hardware works, soundcard is recognized by the OS, modules are loaded, alsamixer volume up and unmuted, sound output is ok, arecord or sound recorder don't get input.
- The microphone hardware works. Having the volumes up I hear the noise from the speakers when tapping the microphone.
- Soundcard is recognized by OS (and like I said, music and all other sound output is perfectly fine)
I just installed Ubuntu 11.04 onto a Toshiba L30-10W. The built-in speakers work and the headphone jack work, but I can't get the microphone jack to work. I've tried all of the ALSA options (e.g.- options snd-hda-intel model=laptop), but none of them work.
View 6 Replies View RelatedI have a Logitech ClearChat Stereo headset, and can hear music playing with the headset connected to the PC speakers (external Logitech). Have setup Empathy to be able to talk to someone using Google Talk. It seems to have been setup correctly, as I can see 2 contacts in the offline list. I don't have PulseAudio installed (I think ??), and can see only System | Preferences | Sound , which doesn't show me much. Here are the settings at present (inboard audio card) ..
Code:
:~$ sudo aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0 .....
How can I test that the microphone is working correctly?
I've just installed Ubuntu Karmic on a HP pavilion AMD 64 bit.I've a weird problem: the microphone works good, but using skype 2.1 beta, it stops working when te my webcam. Even after restarting skype, the microphone doesn't work. To make the microphone work, it seems to me that I've to reboot.
View 4 Replies View RelatedThe audio coming into the headset works just fine; however, the microphone stopped working after I rebooted a few days ago.I am running Ubuntu 10.04.
View 7 Replies View Related