when trying to play songs purchased off of iTunes I don't want to be limited to having to watch them through Virtualbox.how to get vlc or mplayer to play .mp4 videos in Ubuntu 9.10? I've got vlc 1.0 and trying to convert them using ffmpeg didn't work, I keep getting the following error.
swScaler: Unknown format is not supported as input pixel format
Cannot get resampling context
This is true for .flv, .avi, .mov, and .mp4, at least. This is true in both vlc and movie player. Thumbnails generated from frames in the videos appear correctly in nautilus. Videos play fine in firefox, on ....., but I downloaded one as an .flv and then it had the same problem. I have restricted extras freshly installed. My "Ubuntu 9.10 - the Karmic Koala" system is fully updated. I've found several other forum posts about the same kind of problem, but I couldn't find anything helpful in them (like that the contrast setting might be WAY out of whack, which it wasn't, or that nvidia drivers needed to be updated or reinstalled, which I don't have anyway, etc).
View 2 Replies View RelatedI have to use Chromium to play videos on youtube and other sites. Using iceweasel i have video but no sound. If I hit F5 (refreshing site) then I have sound, but nov video.
I made a alsa-base.conf following the instructions in this topic [URL] .... without success
Code: Select alllspci |grep -i audio
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
01:00.1 Audio device: NVIDIA Corporation Device 0fbc (rev a1)
Code: Select allaplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: NVidia [HDA NVidia], device 3: ID 60 Digital [ID 60 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
the movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies View RelatedI have installed Fedora 14 and have problems with the sound i have an Realtek ALC662 6-Channel HD Audio chip and ALSA should be loading by Fedora but no sound not over the speakers and also the headphone doesn't produce sound, while playing video or dvd no sound.
View 5 Replies View RelatedPlaying a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
How to enable sound while playing multiple video ?
View 2 Replies View RelatedWhen i try to play HD (even with 720p) video the CPU load is almost 100%. I'm using vlc player and the movie is barely watchable. If i switch to Movie Player, the CPU load is slightly decreased, but after 2-3 minutes the audio goes out of sync, so no solution there. I have an nvidia 8600gt graphics card and the proper driver installed, every compiz effect works flawlessly without the slightest increase in CPU load and a dual core 2,1 GHz AMD processor. It shouldn't be a hardware issue.
View 4 Replies View RelatedI am trying to burn a video DVD created from "Devede" with K3B. The video DVD successfully burns, and plays in my computer, but does not play in any of the DVD players in the house. I used to user "ConvertXToDVD" when I was on Windows, but am trying to find a free/open source alternative on ubuntu. I am using all default options. I have looked in the settings for both programs, and I fail to see the problem here. Even the ISO created from devede seems to match up to the Video DVD (that works in the players) I had burned with ConvertXToDVD.
In Devede I have it so that the menu is disabled and it automatically plays the first title. Apparently this is not good enough.. I thought this program was supposed to be easy to use? What am I doing wrong here? I am using the same DVD-R I have used before on my Windows machine to great success. I am getting frustrated as I have went through 2 DVDs,
If I try to download a video for later use Ubuntu streams the video instead. How can I get around this?
View 8 Replies View RelatedI'm not getting audio when I play a video file.
Code:
mplayer Naruto/Naruto Shippuuden - 185 v2.mp4
MPlayer 1.0rc4-4.4.5 (C) 2000-2010 MPlayer Team
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing Naruto/Naruto Shippuuden - 185.mp4.
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 1: audio (aac), -aid 0, -alang und
[code]...
I bought an LG external cd/dvd unit (model: GP08 ).
The problem is that I have no sound when playing DVDs. Everything else works fine. I installed libdvdcss (followed this link: https://help.ubuntu.com/community/Re...ts/PlayingDVDs) but still no sound on DVDs (the DVD works fine on a windows machine).
I have an Acer Aspire One with Karmic Koala.
When I play some video file, like some series (.avi), my system often freezes, the image become static and the sound starts looping. Ctr+Alt+Del does nothing and the only way to shut the computer down and restart the system is by holding the power button down for a long time. I've already searched the web for this problem but I find nothing. I have a Asus UX-30 with an Intel GMA X4500MHD.
View 5 Replies View RelatedMy problem is that my computer plays MTS videos very bad (the videos get freeze, etc) in Ubuntu 11.04. I tested many players, but I didn't get good performance during the playback in any of them.
However, in the same computer, I use K-Lite Codec Pack in Windows XP and MTS videos are fine!
Is there any way to play MTS videos in Ubuntu very well?
Performance is excellent in both operating systems (XP and Ubuntu 11.04).
When I start my computer, my comp is set to require password everytime I start the computer. I am using Karmic with all the latest updates. One day, from the Login Screen itself, I selected the Power icon at the bottom right and selected Shut Down. But, from next boot, the login drum sound wouldnt play and even the african sound that comes after logging in wouldn't play. The african sound problem was solved when I noticed that my sound was muted by the GDM on shutdown. However, the drum sound still does not come. I think the solution it to change the volume before logging in.
View 5 Replies View RelatedI've tried to look up different programs for this but can't find anything. I'd like to be able to open my recorder on Myspace for instance and capture any sound playing through my speakers. I used to have a little program for this, but its windows based and won't seem to install correctly in Wine.
View 5 Replies View RelatedI've installed kubuntu 10.04 recently. I'm following the guide at [URL] to set-up the system. I've installed the kubuntu-restricted-extras package however I do not get any sound while playing mp3s. The sound system is working as I get the kde tune when I start up. I have tried playing mp3s in amarok, audacious, kaffeine and vlc. None of them work.
I opened system settings -> multimedia. It shows four devices and only the one which says 'ALC883(analog)' works in all categories (notifications, music, video, etc etc) when I click test. However sometimes I get a notification saying that the device doesn't work.
Another thing I noticed was that the mp3s play when Dolphin shows a preview of the file when it is selected. I mean that there is a preview part in the right hand part of the window. When I press play there, the mp3s play. But there is no sound when I play movies and mp3s in amarok, audacious, vlc or kaffeine
The motherboard I'm using is Gigabyte M61PME-S2P. Its an nForce 430 motherboard with integrated graphics and sound.
Just like the title says, when I use mpd with pulseaudio, I get no sound but clients appear to be playing (ncmpcpp and gmpc). Other players such as vlc or mplayer work just fine. If I go under the mixer, I get "no application is currently playing or recording audio" under the "Applications" tab when playing through mpd. In contrast, when I'm using mplayer or vlc, both show up in that tab. It behaves as though pulse is simply not configured to work with mpd.Here is my config (edited out any commented line for brevity):
Code:
$ cat /etc/mpd.conf | sed '/#/d'
music_directory"/media/data/DM/Genre"
playlist_directory"/var/lib/mpd/playlists"
db_file"/var/lib/mpd/mpd.db"
[code]....
I'm using Ubuntu 64bit 10.04 with FireFox and every video I've tried online has worked except the bp.com's oil gusher video streams. Does any one know what plugins to install to make this work?
View 2 Replies View RelatedI have an ATI 4650 HD and using flgrx via jockey, on 10.10.X becomes unresponsive when I play flash videos inside a browser. The image freezes, and the audio track loops, with a loop length of around 0.5 seconds. The only thing I can is reboot my computer. The xorg log file contains no indication that something went wrong. The last entries in it are the monitor display modes.
I cannot switch to the open source ATI driver, as my monitor screen goes blank after booting.I have tried a fresh system install, but that hasn't worked either.
I have lots of 720p MKV files which play fine on VLC and/or mplayer. These are the two players I know. Whenever I try to play a 1080p file, the video is sluggish and quickly desynchronizes from the audio (mplayer) or the sound is choppy (vlc). This is because one CPU cannot decode a 1080p x264 video. Not powerful enough. Now, I have a Q6600, with 4 cores. Options in mplayer and VLC to use more than one decoding thread don't seem to do anything at this date, as one core is only user (reported by TOP).
View 9 Replies View RelatedSo, I upgraded to 11.04. Everything seems to running okay, but when I go to play a video file, the colors are all screwed up. It looks like they're almost negative in the way that they are displayed.
View 7 Replies View RelatedWhenever I'm playing a video and bring another application to the foreground, the video window appears over the foreground application:
I'm running Natty Narwhal 64-bit. This didn't happen back in Maverick. The hardware is an Asus K42JR laptop. If there's any more detailed information that I can provide to help narrow this problem down, please let me know.
I've found a similar issue on the forums, but it seems a bit different. This guy also has foreground window problems, but in his case they occur with non-video applications and are not consistent (it only happens 10% of the time).
With me, it always occurs with only video playback. The choice of video application for playback does not appear to matter (I've tried Totem, VLC). Strangely, the problem doesn't occur when viewing flash videos from within Chrome.
when I use mpd with pulseaudio, I get no sound but clients appear to be playing (ncmpcpp and gmpc). Other players such as vlc or mplayer work just fine.If I go under the mixer, I get "no application is currently playing or recording audio" under the "Applications" tab when playing through mpd. In contrast, when I'm using mplayer or vlc, both show up in that tab. It behaves as though pulse is simply not configured to work with mpd.
View 3 Replies View RelatedWhen I try to play any music or movie file over my network....VLC or any other player gives me errors. I don't have any problems when I copy movie files directly to my hard drive from my network. This is on Debian 8 if that information is of any relevance here...
Here is the error I am faced with...
Code: Select allYour input can't be opened:
VLC is unable to open the MRL 'smb://gfstorage01/wolf/Torent%20Downloads/Olympus%20Has%20Fallen%20(2013)%20%5B1080p%5D/Olympus.Has.Fallen.2013.1080p.BluRay.x264.YIFY.mp4'. Check the log for details.
I am using open suse 11.4, and have been trying to play video files from a web site, but when I click on the play link all that happens is that it goes to the page where the video should be but it doesn't load or play, not sure if it is a flash or java problem. the file plays without problem in Ubuntu 10.10 and also Win 7. it is a video file from [URL].
View 8 Replies View Relatedi have a intel video card (laptop)when i try to watch movie, i get a blackscreen..... but i listen the soundMPlayer2 2.0 (C) 2000-2011 MPlayer Team
Playing_game.avi.
Detected file format: AVI format (libavformat)
[lavf] stream 0: video (mpeg4), -vid 0
[code]...
I recently switched to Ubuntu 9.10 from Fedora 12 because it was giving me problems, but now I've run into some problems with Ubuntu. I really only use my computer for internet and music, and I'm not really able to listen to my music.My computer is an HP Pavillion dv7-3060US laptop, AMD 64bit processor, 4gb ram, ATI Mobility Radeon HD 4530 graphics chip and an ATI chipset (not sure which).
I have an altec lansing speaker configuration, with a built in subwoofer on the bottom. My problem comes that the sound is coming out of the subwoofer, not the actual speakers themself. When I try plugging in an external set of speakers, nothing happens, the sound still plays. Switching the device from "Interal audio analog stereo" to the other choices in my list does nothing (system>preferences>sound is the list im talking about)I'm able to hear music through my subwoofer when using totem music player, but neither rhythmbox nor amarok play any music. amarok doesn't play at all, and rhythm box shows the music is loaded but no sound comes out and it looks like its playing it at 2x speed.
I've attempted to follow the comprehensive audio problems guide here but I get to step 3 and the website isnt the same, so I can't continue.These are the outputs from the first few steps:
Code:
aplay -l
root@kadar-laptop:/home/kadar# aplay -l
[code]....
I am getting horrid sound distortions whenever I try to play a dvd. The video will play, but there are frequent popping and squeaking sounds. This problem does not appear when playing saved avi files. I have tried both movie player and vlc, getting the same effect. It does not seem to be a hardware problem, as it does not appear when running windows on the same machine. Nor was this a problem on this hardware using earlier versions of Ubuntu. Changing dvd's, using a different dvd drive, even ripping a dvd to an iso and playing the iso with vlc did not help.
View 1 Replies View RelatedI'm having sound problems. I get sound but it sounds horrible. It seems to be worse when i'm playing something in xbmc. When i type this command
[Code]...