I use openSUSE-11.2 one application seems to reserve the jack device hw:0When I try to start qjackctl, I get this dump-out:
21:59:42.928 Steckfeld deaktiviert.
21:59:42.930 Statistik zurckgesetzt.
21:59:42.940 Schaubild der ALSA-Verbindungen gendert.
[code]....
eror I : Failed to open a session for the virtual machine win. Virtual machine 'win' has terminated unexpectedly during startup
eror II: Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Re-setup the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.
I have an M-Audio Delta 44 sound card and I can't get jackd to start. It worked fine under SuSE 11.1 but under 11.2 it seems to be missing something. Here's the error messages I get when I try to start it code...
View 1 Replies View Relatedi have installed VLC and when i ckuick nothig happens.?
View 1 Replies View RelatedVLC had been working well, but after some updates, it crashes after trying to start. When starting from the menu, it puts a slot in the taskbar and has the bouncing pylon for a few seconds, then those disappear. When starting in console, it immediately returns"VLC media player 1.1.7 The Luggage (revision exported)
Floating point exception".VLC starts correctly from console with "strace vlc".I deleted the configuration files "vlc-qt-interface.conf" and "vlcrc" in ~/.config/vlc/, but this made no difference when trying to start VLC.
The system is OpenSuSE 11.3, 32 bit; KDE 4.4.4 release 3; NVIDIA 260.19.29.The problem exists with both VLC versions 1.1.7-1.pm.2.2 from Packman, and 1.1.7-3.1 from Videolan.I suspect this is similar to an Amarok problem described at Amarok Keep Crash and Amarok opens and crashes immediately
suddenly I just could not get it to run. The coloured startup came up but nothing else. So I ran it as su from a terminal and this was the result:<unknown program name>(6552)/:KUniqueApplication: Cannot find the D-Bus session server: "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." <unknown program name>(6551)/: KUniqueApplication: Pipe closed unexpectedly
View 9 Replies View Relatedi use kde 4.4when i try to start amarok (2.2.90) i get:
amarok: symbol lookup error: /usr/lib64/libamaroklib.so.1: undefined symbol: _ZN6Plasma7WebView10itemChangeEN13QGraphicsItem18GraphicsItemChangeERK8QVariant
This is the output when I run it from the console "can't open file '/usr/lib/exaile/exaile.py opensuse 11.3". I'm using opensuse 11.3.
View 4 Replies View RelatedNow everytime i start amarok it keep crash. This is the terminal output:
ari@linux-2tny:~> amarok
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110109 2:47:25 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
InnoDB: Reading tablespace information from the .ibd files...
[Code]....
I don't have idea what's the problem. FYI, I installed nvidia driver before this happens but donn't know if that is related to this problem.
Running openSUSE 11.3, installed a month ago, and the only change I did from the default install was to update to kde 4.5 (along with usual updates).Since the upgrade, kmix doesn't start. When I click it, I see the bouncy kmix icon, and a new slot is opened on the task bar which reads 'kmix', but it shows nothing, and after a minute or so it disappears, along with the kmix bouncy icon.No error is given, so I tried to run from shell. This time when I try 'kmix' it does nothing at all (doesn't appear in 'jobs').
View 4 Replies View RelatedWith OpenSuSE 11.2, I would have a guest account running skype, and a media account running mythtv (both users logged in at the same time using switch user). I had skype on auto answer incoming calls, and I remember watching a movie when I suddenly heard my Dad's voice appear calling my name. That was cool!
Now that I'm using OpenSuSE 11.3 (both were using KDE), skype only plays audio when that user's session is active. Switching to the media account will prevent skype from starting to play any sound. Switch back, sound is normal. If I remember correctly, now the skype audio cuts out as soon as I switch user.
I also have a tv capture card which only STARTS to captures analog audio when the media session is active, mythtv being run by the user media. Once the show is started to record with sound, we can switch users and the show continue to record with sound.
The only thing that should be configured differently from the default install is that I compiled mythtv (it wasn't available as an rpm when I upgraded to 11.3, and haven't bothered to check since).
I have installed Hydrogen with the add & remove software which seemed to install fine in OPenSuse11.3 but when I click the icon nothing happens at all
View 6 Replies View RelatedJust updated WinFF to version 1.3.2-1.1. Since then it won't start up any more due to a floating point exeption. System: OpenSUSE 11.4 (x86) + KDE 4.6.0 Debug info:
WARNING] Out of OEM specific VK codes, changing to unassigned
[WARNING] Out of unassigned VK codes, assigning $FF
ERROR in LCL: TLRSObjectReader.SkipValue unknown valuetype
Creating gdb catchable error:
$080D1568
[Code]...
I had the same error with earlier versions of WinFF in earlier versions of OpenSUSE. Then I could fix it by changing the KDE window styles. The error also occurs with the WinFF qt-version.
i want to start apache and ktorrent on the systems start up, is there a program that will do it for me or do i need init scripts?
View 2 Replies View RelatedI set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I have an 1TB hard drive, half of it for Windows XP SP3, another half for OpenSUSE 11.4. After installing OpenSUSE, it didn't take me much time to notice that there was something wrong with KDE: sometimes it loaded quite fast, as expected, but most of the time I'd have to wait around 1 minute in that loading screen. Then I updated the kernel, as well as KDE itself, but that didn't solve the problem.
After that I tried to start the system using Enlightnment, and it was lightning fast compared to KDE, however, I didn't quite like its interface, and for some reason GNOME refused to start. All that was too frustrating to me, so I gave up and have been using Windows for the last few weeks. Got sick of it now and here I am on OpenSUSE again. Oh, it feels sooo much better! BUT, I'm still with the same problem.
My specs are as follow:
Motherboard: Gigabyte MA78GM-S2H (with updated BIOS, version F11)
Processor: AMD Phenom X3 8450
Memory: 2GB
Videocard: Nvidia Geforce 8500GT (using NVIDIA proprietary drivers)
OpenSUSE 11.4
KDE 4.6.0
Did I forget anything important?
Ps.: I didn't have these problems with Mandriva 2010.2, which, if I'm correct, used the same KDE version.
I have installed the package "Web and LAMPP Server" with the YAST2 installation manager on my openSuse 11.1. The installation runs well without any error messages. When I try to start Apache2 in the YAST2 runlevel manager or from the command line it fails.The start problem seems to me simular as amavis configuration. I have to configure /etc/amavisd.conf before a was able to start amavis in the YAST2 runlevel manager.
How can I make Apache2 to start? Do I have to configure a special file before I am able to start Apache2 in the YAST2 runlevel manager or why doesn�t Apache2 start?
When I login in the kde login in screen starts, but then I hear a beep and it freezes. If I hit ctrl-alt-f2 and log in and then type startx, a blinking curser appears and nothing happens.I am trying to set up VirtualBox to run Windows 7 and I am having trouble getting some usb devices to be recognized in Windows. I tryed following the advice of this link URL...After I added the group vboxusers to my user account and restarted the computer, this problem started.
I ran the command Code: Select alldeluser jrchristophel vboxusers, and I get the response back Code: Select allyou may not remove the user from their primary group.
The other things I did that might have caused this problem was that I installed virtual guest additions for VirtualBox, and one other addition that was needed for the USB functionality with in VirtualBox. I can't remember the name of that which I installed.I have looked at some of the logs in /var/logs.
I am running this Debian wheezy: URL... on my BananaPro.
I installed Gnome and tried startx but command not found. I installed Xinit but then I get :
Xinit:unable to connect to x server.
My room mate is trying to use an old Dell he has as a print server. After much twisting his arm, I was able to convince him to go with Debian, which, I would install. I used a 5.0.4 Net Install CD I had, and included Desktop Environment (he needs a GUI), and Print Server. Basically, as usually happens when I install Debian, I am having trouble getting X to work. Heres what the errors look like after X fails:
Ring End Space: 24 wanted 32
Fatal server error: lockup
Waiting for X server to begin accepting connections giving up.
xinit: Connection reset by peer (errno 104): Unable to connect to X server
xinit: No such process (errno 3): Server error
$ padevchooser WARNING: Unhandled message: interface=org.freedesktop.DBus.Introspectable, path=/, member=Introspect $ uname -a Linux householdone 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 i686 GNU/Linux I did this already: http://ubuntuforums.org/showthread.p...ght=pulseaudio I also removed and re-installed padevchooser
View 3 Replies View RelatedI'm trying to use Openshot video editor but it doesn't start, I have tried to uninstall all other video editor (kdenlive, cinelerra) cancel and re-install libraries (mlt, melt, ffmpeg...)
View 7 Replies View RelatedI recently downloaded JAMin and whenever I try to start the program it doesn't start. It will show the tab saying "Starting JAMin" and then it will go away after a while and nothing happens.
View 1 Replies View RelatedI have been trying to install Squeeze from the 6.0.1a KDE CD-1 plus the Debian repos. I just cannot get X to work. I get similar bad results to those mentioned by other users having similar problems, but none of the suggested fixes works.
Basic hardware information:
Desktop PC, whole 40 GB disk used for install
Graphics card: none Video controller on motherboard: VIA Technologies S3 UniChrome VGA controller (about 8 years old)
Monitor: Samsung Syncmaster 1280 x 1024 (about 8 years old)
Some things I've already tried: in rescue mode, as root, in /etc/X11X -configuremove file to /etc/X11/xorg.conf basically everything mentioned in threads in past two months regarding users who cannot get X to work reinstalling 100x with every choice for the installer I can think of
What happens: when doing the install, contrary to expectation, I am never prompted for any of the hardware information which the documentation at debian.org says I should have on hand (is that a good sign or a bad sign?)
No matter how I try to do the install,I always seem to get a nongraphical installation, so I try this: as root:apt-get install xorg in /etc/X11X -configthen move generated file (which looks like X didn't try to create an actual configuration file) to /etc/X11/xorg.config as non-root user:startx I get black screen (or a tiny tiny konsole at upper left) and system hangs
How can I tell whether this an X misconfiguration? How can I fix it? How can I tell whether I simply need a driver? Where do I look? How can I tell whether my hardware is simply incompatible with Squeeze? What do I need to replace? Do I need to get a new monitor in order to use Squeeze? Do I need to buy a new motherboard with newer video controller? Do I need to buy a graphics card? Which?
X won't start (awesome WM) after upgrading to jessie. It seems to startup up, then just stops. I'm running startx from the command line after logging in. The xorg log (bottom) looks good and I see an exit code of zero.
I do see this in sysout:
Code: Select alldebian xf86TokenToOptinfo: table is NULL
Googled around but I can't find anything specific on this one.
I'm not using any xorg.conf, as booting into a linux rescue cd everything works ok
Code: Select all[ 2275.960]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 2275.960] X Protocol Version 11, Revision 0
[ 2275.960] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 2275.960] Current Operating System: Linux jj 3.14.25 #1 SMP Fri Dec 5 10:17:33 EST 2014 x86_64
[Code] .....
I installed libreoffice from the official Debian repository. Even after a clean installation of Debian Jessie, Libreoffice started and ran only once. After that, when LO was started, it gave an error message: "Gtk-Message: Failed to load module "canberra-gtk-module".I installed "canberra-gtk-module." From then on, LO never gave any error message in terminal. The banner flashes across the screen for a moment and then disappears.
I deleted ~/.config/libreoffice folder and started LO again. Each time the command "libreoffice" is run in terminal, it creates the configuration files in ~/.config folder.I created a new user to check if LO would run. It does run when a new user account is created. But the problem keeps coming back.
After uninstalling libreoffice, I tried installing openoffice 4. Even openoffice 4 wouldn't start. The banner would just appear for a moment.
I was able to start multiple X servers before. Now after the upgrade to rootless X, I had to add myself to the "input" group to be able to start X, but I'm unable to start 2nd X on a different vt.
Here are the errors and warnings I'm seeing:
Code: Select all[114940.404] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[114940.409] (WW) Falling back to old probe method for modesetting
[114940.409] (WW) Falling back to old probe method for vesa
[114940.409] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[114940.409] (EE) Screen 0 deleted because of no matching config section.
[114940.409] (EE)
[114940.409] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
I'm on Debian stretch/sid.
So, in all distributions that I test, I did not get working the Plymouth, if I try to fix, the system broke. Only me rest open the System with recovery mode and execute "chroot" and remove the changes.
I was following that tutorial >> [URL] ....
And everything goes normally, with no errors, but when I reboot the system, GDM not start, leaving me with a black screen with the processes that system start. So how i cant fix that?
My hardware is >> Core 2 Duo 8400, GT 740 GDDR5 and 2 Hd of 500GB.
I have been using bumblebee on my Optimus Laptop for a long time.I think I have this problem since the last Xorg upgrade, some months ago. The upgrade notes warned that Xorg now runs on userspace, and that configuration files are now read from the user (although I haven't noticed that).Then optirun ceased to work. As I'm using sid, I'm used to things being broken sometimes, so I simply let it go waiting for an upgrade that would fix it. Since this upgrade (either to Xorg or to bumblebee) is not coming, I have searched on the Internet, and I'm surprised that many people have had problems with bumblebee, but no one seems to be having the same exact error (see below).
I have tried everything (everything my limited knowledge and my internet searches allow me). I have tried with nvidia and nouveau drivers, but I get more or less the same result.
Code: Select all$ sudo systemctl status bumblebeed
● bumblebeed.service - Bumblebee C Daemon
Loaded: loaded (/lib/systemd/system/bumblebeed.service; enabled; vendor preset: enabled)
Active: active (running) since mié 2015-12-30 09:30:34 CET; 20min ago
[code]....
It seems Xorg is failing but is not giving any information about the failure, no message, which is different to the problems I have found in the Web.
I have purged bumblebee packages to assure I'm using default configuration files. I have added rcutree.rcu_idle_gp_delay=1 to GRUB_ CMDLINE_ LINUX_ DEFAULT as instructed on some howtos.
I asked the question on LQ, but since activity related to Debian there is smaller, it is here.
I can't start Openbox, using xinit or startx. I have a warning when using xinit:
Code: Select all***** Imlib2 Developer Warning ***** :
This program is calling the Imlib call:
imlib_context_free();
With the parameter:
context
being NULL. Please fix your program.
I don't have dbus, display managers, X is started on tty3 because I reduced the number of ttys. In xinitrc there is
Code: Select allexec openbox-session
I see a cursor appearing for a second, but then the screen goes back to tty.
The problem is new; I'd been using Openbox for a couple of months back then, and it was fine.
System is Unstable.