While compiling one of my programs I am getting this error: Undefined symbol:_gfortran_internal_malloc64My program actually gets completely compiles and linked and this error is shown in run time.Does anybody have any experience about getting around this ? May be using some different version of GFortran ?I am using Centos 5.4 64 bit and GFortran 4.4
View 1 Repliesundefined symbol: _gfortran_internal_malloc64?
View 2 Replies View RelatedI performed a yum update and now my yum is not working and I am unable to start my apache processes (in a dmz configuration).This is the error I am getting from yum.
yum clean
Traceback (most recent call last):
File "/usr/bin/yum", line 4, in ?
import yum
[code]....
Apache doesn't start with libedit.so.0.0.34 ( from libedit0-3.0.snap20090923-4.1.x86_64 ).
Code:
[Tue Dec 15 16:20:51 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache]
PHP Warning: Directive 'register_long_arrays' is deprecated in PHP 5.3 and greater in Unknown on line 0
/usr/sbin/httpd2-prefork: symbol lookup error: /usr/lib64/libedit.so.0: undefined symbol: tgetent
Solution: I copied /usr/lib64/libedit.so.0.0.27 from a previous install and symlinked /usr/lib64/libedit.so.0 to it.
ive made a slight mistake on my Ubuntu 9.10 64bit. I was trying to get Voodoo Motion Tracking software to work, and it was having trouble locating some Qt Libs, so I decided it was a good idea to move its included libs into /user/lib32 directory. Voodoo now works, but Skype instead comes up with:
Code:
skype: symbol lookup error: /usr/lib32/libQtDBus.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv Skype was installed using their own provided 64bit .deb - it was previously working fine.
The most recent update impacted my thunderbird-3.0. When launched I get these error messages
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: Symbol `SSL_ImplementedCiphers' has different size in shared object, consider re-linking
/usr/lib/thunderbird-3.0.3pre/thunderbird-bin: symbol lookup error: /usr/lib/libnssutil3.so.1d: undefined symbol: PL_ClearArenaPool
I can only assume the libnssutil3 library was upgraded and this broke the library call in the thunderbird-3.0.
I'm running Ubuntu 10.10 and was looking for software to mix mp3's. I want to try mixxx (found here) I installed the most recent package by using the ppa of the project (as described here) Install seems to be ok (no error messages)But when I try to run mixxx from the menu nothing happens. Nothing. Running it from the terminal with the command
Code:
mixxx
I get this error message:
Quote:
mixxx: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN16QIODevicePrivate4peekEPcx
Previously after doing aptitude upgrade, my pidgin seems broken with no gui shown. So I decided to download the latest source from pidgin website and build it from source, but I think I made situation worse because it then complained that ssl lib was needed. Then I removed the libpurple (e.g. aptitude purge libpurple0 libpurple-bin libpurple-dev) and reinstalled pidgin (aptitude install pidgin). Now it shows the error
pidgin: symbol lookup error: pidgin: undefined symbol: purple_media_element_info_get_type
I searched on the internet and can not find a solution. The clues on the internet says that's because the piding I use is the older version of libpurple. But I think I've removed all with purge and reinstalled it. Maybe some legacy binary is referenced. What or where it might be? Or where there may contain related information.
I am trying to setup the wlan access for my Fedora 9 system. I installed ndiswrapper. But when I run
Code:
ndiswrapper -l
i am getting the error
Code:
/usr/bin/perl: symbol lookup error: /usr/bin/perl: undefined symbol: PL_use_safe_putenv
Anyone else having problems installing Skype beta (direct from Skype) on 11.3 x86_64? Error is:
Code:
skype: symbol lookup error: /usr/lib/libQtNetwork.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv
I've been through the forums and Google and made sure I have all the 32-bit libs required by skype. For example:
Code:
6930p:~ # rpm -qa | grep -i libqt4
[Code]...
I am using Ubuntu 10.10 I get the following massage. Admin@Ubuntu21:~$ skype: symbol lookup error: /usr/lib/libQtDBus.so.4: undefined symbol: _ZN14QObjectPrivate15checkWindowRoleEv I have tried reinstalling it but still the same problem.
View 1 Replies View RelatedSlightly odd one.On a clients server yum seems to be completely broken, i.e :-
------------------------------------------------------------------------------
[root@tvsmedia noarch]# yum
There was a problem importing one of the Python modules
[code]....
I'm having the following errors:
# yum clean
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:
/usr/lib64/libnssutil3.so: undefined symbol: PL_ClearArenaPool
install a package which provides this module, or verify that the module is installed correctly. It's possible that the above module doesn't match the current version of Python, which is:
2.4.3 (#1, May 5 2011, 16:39:10)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-50)]
If you cannot solve this problem yourself, go to the yum faq at:
http://wiki.linux.duke.edu/YumFaq
#rpm -qf /usr/lib/libnssutil3.so
/usr/lib/rpm/rpmq: symbol lookup error: /usr/lib64/libnssutil3.so: undefined symbol: PL_ClearArenaPool
[code]....
If i start shotwell i get this message.shotwell: symbol lookup error: /usr/lib64/libgee.so.2: undefined symbol: g_malloc0_n
Not sure if i killed something, but would like to get it going again.Can not really figure it out, but i reinstalled shotwell. Did not solve the problem.
Yesterday my gnome gui locked up during startup. there is a problem with the "gnome power manager" package.
I get a pop-up saying "The configuration defaults for GNOME Power Manager have not been installed correctly. Please contact your computer administrator."
Tried:
When trying to reinstall the gnome-power-manager package, I get the following error: gconftool-2 symbol lookup error: gconftool-2 undefined symbol gconf_schema_set_gettext_domain
Only the terminal works>
This is the error I receive when I try to install a library. I really do not know If I could do something to skip this error message.As you might see below. I receive the following error message Error in dyn.load(file, DLLpath = DLLpath, ...):unable to load shared library '/home/apa/R/x86_64-unknown-linux-gnu-library2.11/RandomFields/libs/RandomFields.so': /usr/lib64/R/lib/libRlapack.so: undefined symbol: _gfortran_concat_string
This is the full error log
Bash | [CODE]* installing *source* - Anonymous - d4DH09Wx - Pastebin.com
When I tried to boot up this morning I receive the following errors: init: plymouth main process (302) terminated with status 127.mountall: symbol lookup error: /lib/libm.so.6 undefined symbol: , version GLIBC_2.0
init: mountall main process (323) terminated with status 127 I am using Ubuntu 10.10 and things have been fine until now. Can someone explain the errors and suggest how I can fix them. Right now I am using the trial version on the install cd to get up. I do have access to my main hard drive so I can make corrections.
I just installed the latest updates from Slackware-Current, The update went fine, did a reboot, installed the nvidia driver (NVIDIA-Linux-x86_64-195.36.08-pkg2), started X successfully. Now, whenever i open an X dependent application it gives me the following error:
Quote:
symbol lookup error: /usr/lib64/libXi.so.6: undefined symbol: XESetWireToEventCookie
I am running a Multilib setup, i have the latest toolchains from AlienBob installed. the ldd output goes like this:
Code:
linux-vdso.so.1 => (0x00007fff9ebd2000)
libXext.so.6 => /usr/lib64/libXext.so.6 (0x00007f8daef94000)
libX11.so.6 => /usr/lib64/libX11.so.6 (0x00007f8daec5b000)
libxcb.so.1 => /usr/lib64/libxcb.so.1 (0x00007f8daea3f000)
[code]....
I have been trying to install lmms on my Slackware 12.1 system.I have installed QT, cmake in order to compile the source.
It seemed to install correctly (after a bit of reading about how cmake works....) but gives me this on run:
Quote:
bash-3.1$ lmms
Notice: could not set realtime priority.lmms: symbol lookup error: lmms: undefined symbol: _ZN8QPainter10drawPixmapERK7QPointFRK7QPixmap
bash-3.1$
So my understanding is that it is missing a file or command associated with the program, through it not being linked or not existing. Is there any way I can find out where it thinks this file/data should be, so as to ascertain what libs/packages have it? As far as I can tell, I have all dependencies satisfied.....
I'm trying to use mencoder and get these errors:
Code:
/>mencoder
mencoder: /usr/local/lib/libavformat.so.52: no version information available (required by mencoder)
mencoder: /usr/local/lib/libavutil.so.49: no version information available (required by mencoder)
[code]....
I've compiled a program on ubuntu with python(make python) but the problem comes when I try to use it and exactly after the command line "from libpy import *", the message that appears is such
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "libpy/knit.py", line 28, in <module>
import _knit
ImportError: libpy/_knit.so: undefined symbol: _ZTVN10__cxxabiv120__si_class_type_infoE
I cannot seem to get VMWARE workstation to run on SUSE 11.3. I am getting the following error message: /usr/lib/vmware/bin/vmware-modconfig: symbol lookup error: /usr/lib/gio/modules/libdconfsettings.so: undefined symbol: g_settings_backend_get_type
This is happening with version 6.5 as well as 7.1
I am using Suse 11.3 and Adobe Reader9, all updates are installed. However, trying to print an pdf results in:
/usr/bin/acroread: symbol lookup error: /usr/lib/libssl.so.0.9.8: undefined symbol: EVP_camellia_128_cbc
I recently wanned to use my vmplayer installation and I got the following error : /usr/lib/vmware/bin/vmplayer: symbol lookup error: /usr/lib/vmware/lib/libvmwareui.so.0/libvmwareui.so.0: undefined symbol: vmodl_vmomi_key_any_value_get_type
I try to reinstall vmplayer. It didn't help.
I upgraded f13 to f14 and X fails to start. I compared the newest Xorg.*.log with what I get booting from the live CD (successfully) and the problem seems to be here:
Code:
[ 62.408] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 62.408] dlopen: /usr/lib64/xorg/modules/drivers/nouveau_drv.so: undefined symbol: miEmptyData
[ 62.408] (EE) Failed to load /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[code]....
In the meantime I will try and force an upgrade to fc14 packages. I really have to get this working before using the target machine at work tomorrow!
I was using audacious happily, but after the dist-update last week I can't get is working anymore. The error message is:
audacious2: symbol lookup error: audacious2: undefined symbol: index_new
Version: audacious-2.2-1.pm.5.1
uname -a output is: Linux linux-9b84 2.6.27.39-0.2-default #1 SMP 2009-11-23 12:57:38 +0100 x86_64 x86_64 x86_64 GNU/Linux
Deleting .config/audacious, .local/share/audacious, and .cache/audacious doesn't help (it did with a similar problem before). how to get this program working again?
Having installed samba4 and smbfs I am trying to share my documents directory into my home network. But when try to do this I get the following error -
Samba's testparm returned error 1: Traceback (most recent call last):
File "/usr/bin/testparm", line 43, in <module>
import samba
[code]....
I am using 10.10. I want to use ubuntu machine as my backup.
I have Slackware r13.0 32 bit installed, and I'm interested in getting SNORT installed with Barnyard and BASE to learn about IDS using my own home network. I'm following a guide found here:
[URL]
I'm having trouble getting past the "create the BASE tables" section. Everything up to that point seems to have been functioning properly. When I attempt to login with my username/password, I get rejected.
The httpd error log reports the following:
[DATE] [error] [client] user snort not found: /frontend
I can manually get into the mysql database with this username/password combination. I've been working on this on and off again for the past few days, and I forgot what led me to the mod_auth_mysql.so module, but I remember reading some posts elsewhere that pointed to this module. I found the source, and used apxs to compile and install it. However, when I insert the "LoadModule mysql_auth_module modules/mod_auth_mysql.so" line into the httpd.conf file, I can't restart the httpd service, and I'm given this error:
httpd: Syntax error on line 117 of /etc/httpd/httpd.conf: Cannot load /usr/modules/mod_auth_mysql.so into server: /usr/modules/mod_auth_mysql.so: undefined symbol: mysql_select_db It seems that the frontend URL on my server is attempting to use php to authenticate to the mysql database. Am I on the right track here? I've seen other posts with similar problems, but they recommend re-installing either mysql or php from the slackware site, but the Slackware package browser site (http://packages.slackware.it/) is down until a new one is written from scratch.
I've recently installed a RedHat Enterprise Linux server and am attempting to get PHP/MySQL installed on it. It cannot load the dynamic php mysql module, giving me an error (in /var/log/error_log) that reads as follows:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mysql.so' - /usr/lib/php/modules/mysql.so: undefined symbol: executor_globals in Unknown on line 0
(In fact, it fails to load ALL of the dynamic php modules, either with the "undefined symbol: executor_global" or "undefined symbol: core_globals" I DO NOT WANT to compile anything -- I want to stay with stock RedHat released software.
[root@hostname-suppressed httpd]# uname -a
Linux hostname-suppressed 2.6.18-194.17.4.el5PAE #1 SMP Wed Oct 20 13:13:33 EDT 2010 i686 athlon i386 GNU/Linux
[root@hostname-suppressed httpd]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
[code]....
I had installed PHP using yum install php. I am trying to use the pdf_new function to create pdfs from existing text files, but I get this error PHP Fatal error: Call to undefined function pdf_new()I have noticed that when I run the phpinfo() command, I cannot find the PDF phrase at all. My php.ini file does not even have these two linesextension=php_pdf.dll extension=php_cpdf.dll kind of command I should use if I need to build PDFs using PHP on Centos 5?
View 1 Replies View Related