Ubuntu / Apple :: Windows 7 Not Showing Up Under Grub For Macbook Pro
Jan 23, 2011
I am trying to triple boot osx, win7 and ubuntu 10.10 on my macbook pro. This is the way I did it:
-Installed osx and created 2 partitions in disk utility, one for osx and another formated as dos fat to manually hybritized my drive and allow for windows installation (the new bootcamp is currently messed up, so can't do it that way).
-Installed win7 by bio booting the cd, and deleting the formatted partition (dos fat) and creating a new one via win installation.
-Installed ubuntu by bios booting the cd and creating its own partition in setup.
Now, when I turn on my macbook and press alt, 2 icons come up, mac and windows (so good so far!). But when I go into the windows option, grub loads and I see 5 entries:
-Ubuntu
-Ubuntu safe mode
-Memtest
-OSX 32 bit
-OSX 64 bit
Obviously osx is not going to boot under bios boot. But where is win7 that should be in the list?
View 2 Replies
ADVERTISEMENT
Mar 10, 2011
This seems to be a variant of a problem many people have had, but after several hours trawling through various forums, I haven't seen a reliable match for my situation.In brief:Adding a third boot partition (of Ubuntu) to my existing dual boot of OSX 10.6 and Windows 7 seems to have crippled the Windows boot from working, because Grub apparently takes over the process. Yet Grub does *not* appear to be on the Windows partition.
More verbose:I have an older MacBook Pro (3.1, running Snow Leopard) that I recently refitted with a new 240GB SSD HD. With the extra space (it was previously only 120GB) I decided to add a dual boot with Windows 7 using bootcamp. This all went swimmingly well.Encouraged, I decided to follow this Lifehacker article's suggestion and triple-boot the machine with Ubuntu (I'd never used Linux before):So I now have the nice rEFIt boot partition selection screen, and, indeed, I'm up and running in Ubuntu, and enjoying it.
Only one problem: I can't get into Windows any more. If I try to go in through rEFIt *or* by holding down OPT at startup and selecting the windows partition directly, the result is the same: I get thrown into Grub's selector, and selecting the Windows partition from there leads to an error message and a dead end.Having read through numerous postings, I get the impression that Grub is doing something or living somewhere that it ought not to be, but in most cases I've seen, people had accidentally installed Grub onto the Windows partition (or indeed onto EVERY partition). So far as I can tell, this isn't the case with me. Here's my boot summary:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 9 Replies
View Related
Jun 20, 2011
I am able to install 11.04 (64bit) on my MBP, but after installation I cannot boot into it.[URL]...
Quote:
This information will not work for iMac (11,1) users installing recent versions of Ubuntu (e.g., Maverick). The presence of the bios-grub partition that the Ubuntu installer creates by default (e.g., sda3) causes a conflict that prevents syncing the GPT and MBR partition tables. Deleting sda3 does not help since grub2 requires that bios-grub partition, nor will it use either sda or sda4 aborting with the error: "This GPT partition table has no BIOS boot partition; embedding won't be possible!". So installing Ubuntu with the bios-grub partition fails and installing without it fails. See "Single-Boot". And this seems to be the problem, as trying to re-install grub from the live-cd results in that error message. Looking at this forum there are a lot of people running ubuntu on the same laptop, so my question is: How??
View 5 Replies
View Related
Jul 11, 2011
I've just successfully installed Ubuntu 11.04 on my macbook pro, but when I boot, I just get a blinking cursor. I've tried the following to try to fix it, with nothing working:Press "Shift" to boot into GRUB (result: doesn't respond)Using liveCD, edit grub settings to allow for this (result: same as before).Chroot using liveCD to install required video packages (result: updates work, but installing new or upgradingexisting packages fails because it can't properly start jobs. I assume this is because it wants to use resources that would exist if the system were truly booted from the HD but the resources don't exist in the LiveCD environment)Chroot using LiveCD and try using jockey-text to install NVidia drivers as suggested on https://help.ubuntu.com/community/MacBookPro5-3/Lucid by command line instead of by GUI.Can't connect to certain sockets (the device files don't respond because they're not in the active system, I guess).
View 2 Replies
View Related
Nov 20, 2010
I have a Macbook Pro 3,1 (2007, Santa Rosa) and I'd like to install Ubuntu 10.0.4 LTS which I downloaded from this site and burned to CD on an Intel iMac.urn seems fine, as CD appears as Ubuntu 10.0.4 on the iMac desktop. Upon trying to boot my Macbook Pro from the Ubuntu CD, whilel holding down the Alt key, my boot options are the Macbook Pro hard disk and a CD icon that says Windows. (Why does it say Windows?)After selectinghis CD as the boot device, the CD starts to load, the screen goes almost darkyou can faintly see the desktop), then after about a minute the screen goes black. Throughout this time I can hear the CD spinning up and down
View 1 Replies
View Related
Feb 11, 2010
I was foolishly messing around with Grub trying to get it so it only show my two most recent kernel versions of Ubuntu and Windows 7. The tutorials on how to do this were not clear, so I deemed it not a big deal and ultimately didn't end up making any changes. However when I restarted to boot into Windows 7 it was gone for Grub's boot list. I looked at the grub.cfg file and in it under os-prober, where i'm assuming Windows 7 should be there was only Vista (which wouldn't boot when I tried it, just a black screen). I had upgraded from Vista over the internet when Windows 7 first came out, then installed Ubuntu and it worked fine until this. I am using 64-bit Ubuntu 9.10, and have Grub 1.97 beta~4 installed, which was installed with Ubunutu.
View 9 Replies
View Related
Oct 21, 2010
I Currently am running Ubuntu 10.10 on a hard drive with three partitions. One with Ubuntu, a Media partition (Music, Videos, pictures, etc.) and the last is my Windows 7 installation. I can acess all of these partitions in nautilus as well. However when I start up my computer it automaticly loads into Ubuntu and when I manage to see Grub I only see 3 Entries Which are the Ubuntu kernel, Ubuntu recovery Kernal and memtest86+. How do I make Grub recognise my Windows 7 Installation?
View 9 Replies
View Related
Nov 26, 2008
I just installed OpenSuSE 11 and after it was done installing and i rebooted, Windows doesn't show up on the boot screen I only get the default OpenSuSE and Fail Safe options.
All i know is that vista is on sda3 when i partitioned my drive. Here is my menu.lst entry for windows:
###Don't change this comment - YaST2 identifier: Original name: windows###
title windows
rootnoverify (hd0,8)
chainloader (hd0,0)+1
View 9 Replies
View Related
Aug 3, 2010
First up, assume i know nothing about computers. I have a MBP 5,5, and choosing the logo for windows brings up the grub menu, as does choosing ubuntu's logo. I've read a lot saying i need to install GRUB natively under ubuntu, but I've had no luck doing so. can anyone essentially walk me through this step by step? or offer alternatives?
MBP 5,5
OS X 10.6.4
Win 7
ubuntu 10.04
View 3 Replies
View Related
Mar 20, 2011
I installed Fedora 14 alongside windows, overwriting my old Ubuntu 10 partition. Unfortunately, now the GRUB loader only recognizes my Fedora partition and the built-in windows recovery utility partition. I checked the disc utility and my windows partition still definitely exists, I just can't seem to boot into it.
View 7 Replies
View Related
Jan 20, 2010
After shutting down linux the first time on suse 11.2 the grub loader won't show me the option to boot windows. I tried using wine and dosemulator to get to windows and it doesn't work because I don't know the file name to open windows.
Their are certain programs that I can only run in windows and I need windows open to install them.
View 7 Replies
View Related
Apr 2, 2011
The highest I see is kernel_task at 362 mb.
I was running Cafe World with the latest Google Chrome and I doubt that Cafe World would use 7 gigabytes of ram.
View 1 Replies
View Related
Feb 20, 2010
I've got a Macbook Air and a verified 9.10 liveCD in the external superdrive. I can successfully boot to the CD, but when I choose "try ubuntu without installing", all I get is a blinking cursor in the upper-left of the screen forever. Any idea why it won't start? CD works fine on my Dell, that's why I say it's verified.
View 7 Replies
View Related
Feb 21, 2010
Is there any way to switch to the nVidia 9400 controller in Ubuntu 9.04 on Macbook 5,1?
When i run lspci i can't see the 9400 controller code...
View 9 Replies
View Related
Mar 27, 2010
Today i went ahead and installed ubuntu on my windows desktop pc. I tryed the live cd and tested it out and everything was fine i then installed it using wubi. I then wanted to install it to my macbook ( bought in june 2009 ) and i booted the live cd and chose try ubuntu without any change to your computer. It booted a black screen with a white _ at the top then the screen went white and did nothing. I tryed it several times and nothing happend. I then said ok il maybe just try install it through wubi on my bootcamp partition and it all went fine until i got to the windows bootloader and chose ubuntu, it camp up finishing linux installation and where its meant to change and show the ubuntu symbol after ( i know because i've installed ubuntu on the pc) the screen went white. Nothing.
View 9 Replies
View Related
Apr 30, 2010
I have a first generation Macbook that shipped with Tiger. I don't often use the os x partition anymore, as I installed Windows XP on a 15 gig partition back when bootcamp was still in beta and I normally use that when I'm on my laptop. Since Tiger is rather old and the only reason I would want to upgrade to leopard is to have access to bootcamp again (they disabled access to the bootcamp application in os x, but I can still boot into windows), I have been thinking about wiping out my os x installation and using ubuntu instead. Does anyone have any thoughts on the pros and cons of totally removing os x?
The main reason I hesitate to just jump in and do it is because if I decide to install os x again I won't be able to install bootcamp again, unless I buy leopard. If I wipe out os x and install ubuntu, will I still be able to access windows in the same way? Windows uses bootcamp drivers to run properly, so I have never quite been sure if it is pulling something off of the os x partition or if it is totally standalone.
View 3 Replies
View Related
May 4, 2010
I have a macbook5,1 with ubuntu 9.10 on it. Does anyone got wake-on-lan working on this type of machine (or any other intel macbook?)
At startup, ethool sets the wake on lan parameter. I tried sending the magic packet with the wakeonlan utility.
View 2 Replies
View Related
May 17, 2010
I have just installed the latest Ubuntu 10.4 LTS on my Macbook Pro and the one thing I cannot get to work no matter how much i try the fixes and suggestions they do not work. I have the volume controls, even the ones on the keyboard work but there is just no audio what so ever.
View 1 Replies
View Related
Jul 16, 2010
I would like to know, how could I install ubuntu on Mac. I've gone through the following guide, but there is no option for my machine MacBook Pro 6.2.
Code:
[URL].. BTW, i would like to have dual-boot option with Mac OSX pre-installed.
View 2 Replies
View Related
Nov 8, 2010
I get through the install just fine till the end Iv tryed twice. When i get to the "Who Am I" screen i fill out all the info the "Forward" Button doesn't light up, it keeps on installing till "Ready when you are" and then i'm kinda stuck.. I can go back to past screens and edit the info and stuff but thats it can't move on.
View 4 Replies
View Related
Nov 23, 2010
When I installed I noticed no sound was emanating from my computer and a red light coming out the headphone jack. s there any reason why there wouldn't be any working sound? Everything else seems to be working fine. I installed the additional drivers but the only ones listed were graphics and wireless.
View 3 Replies
View Related
Dec 29, 2010
Introduction: I wrote a very extensive and quantified tutorial and informational guide aiming to upgrade the latent information from the wiki's on MacBook Pro 5,2. An accidental toe tap ended with me bumping my head and pressing the X button on firefox. What happen had to be 1 out of a billionth of a chance. So this version will be simple and to the point, until I can muster enough patience to detail it all out again. Please correct any errors.
sudo apt-get install pommed - To get backlight keyboard working.
sudo apt-get install cheese - To get iSight working.
sudo apt-get install lirc - to get remote working (tested in XBMC)
sudo apt-get install bluemon - Pairs Mighty Mouse and Wireless Keyboard (optional)
[Code]...
View 9 Replies
View Related
Mar 15, 2011
I have installed it on my Macbook Pro 5.5 via rEFIt+ and the install works well except for the lack of sound. I've seen this issue posted about on the forums and I've followed the advice posted here as best I can with my limited knowledge. Terminal didn't recognise the aptitude (command not found). I guess that may be due to an older build of Ubuntu being used in the example?
View 5 Replies
View Related
May 1, 2011
I have downloaded the 64 bit iso and burned the CD-ROM per the instructions. The CD is verified. When I boot the mac, holding down the C key, I get a menu of options relating to Ubuntu. If I choose the trial run from CD then the CD drive starts up but the screen goes blank and I end up with just a blinking underline cursor in the upper left hand corner of the screen. Does anyone known if one can, and if so how, to boot the live CD on a Macbook Pro 5,2?
View 6 Replies
View Related
Jul 25, 2011
The wiki says there is a way to install from usb but I can't get it to work on my Macbook Air 3,2 (the Nov 2010 revision, not the one from last week).
My goal is to dual-boot OS X and Ubuntu, but I can't get the Ubuntu installer to boot. I've tried a lot of variations on the instructions I've found, so I get the feeling I'm probably missing something fundamental.
I installed refit and used BootCamp to partition the drive. I downloaded desktop/alternate and i386/amd64 isos. I tried to follow the instructions to use unetbootin on OS X to install the ISOs to my USB drive, but neither drive that I connect appears in the "Drive:" selector when on OS X. I used usb-creator-gtk and unetbootin on an Unbuntu machine to try each of the four ISOs.
When I try to boot the Air from the USB drive, I got a few different types of failure:
gpt, single fat partition, unetbootin -> alternate amd64
result: "Non-system disk" "Press any key to reboot"
mbr, single fat, unetbootin -> alternate amd64
result: black screen, fan runs at 100% after a minute or two
[Code].....
I tried dd'ing a disk image to my new partition as described here and here with the desktop amd64 and i386 images, got a few different errors - once syslinux complaining "Error: No configuration file found" when the drive I dd'd from wasn't properly unmounted before bringing it to the Air, once I chose the drive in refit, refit displayed the single logo, and it never booted, and once I got an error I didn't copy down about needing a boot floppy.
Has anyone successfully booted Ubuntu from USB key on the Air? Exactly how did you prepare which image?
View 6 Replies
View Related
Aug 10, 2011
I've been trying to install 11.04 on my MacBook Pro for the past couple weeks, and I'm getting pretty frustrated with it. When I try to boot from a DVD, I either get a blank screen with just a flashing cursor, or it will ask me if I want to try, install, or verify the disc, after which I will get a bunch of different-colored blocks all around the screen.
I have installed past versions of Ubuntu on this computer with no problems, so I'm pretty stumped now on why I'm having this problem. Also, I've tried the Ubuntu Wiki and sticky thread on this forum, but nothing in either seems to help. Additionally, I have installed Mac OS X 10.7 Lion. I don't think it'd effect anything, but I thought it was worth mentioning.
View 2 Replies
View Related
Jan 20, 2010
I recently bought a macbook pro 5,5 (unibody) and I'm running both OSX and Ubuntu 9.10. I love the laptop, but I've been having some issues with the touchpad in karmic.
In OSX, I can keep my thumb on the bottom of the touchpad as if it were a button and operate the rest of the touchpad as normal. With my thumb on the bottom of the pad, I can still click and drag and use two finger scrolling.
In ubuntu, I've used the instructions from[url]
If I have a thumb on the touchpad, it always assumes I'm two-finger scrolling. I've tried synclient BottomEdge=600, but it doesn't make any difference.
View 4 Replies
View Related
Feb 3, 2010
I'd like to find a way to control the fan's activation threshold in ubuntu (i use SMCFanControl in OS X.
View 4 Replies
View Related
Apr 11, 2010
I have a Macbook Pro with a b0rked DVD drive, and want to install Ubuntu on it.
I have followed the instructions here: [URL]
But when rebooting and holding ALT, I don't get the option of booting from USB.
Possibly related, when I view the USB drive in Disk Utility it's marked as "Bootable: no" :
I've tried this with two different USB sticks.
I've also burned a Ubuntu install disk from the original ISO, loaded it into another mac and started that mac in Target Disk Mode. Then I connected them with Firewire, rebooted the mac *without* the disc drive, held ALT and chose the shared disc as the boot device. Though weirdly it was named "Windows". Sadly, I then got a message on a black background saying it was not a bootable device.
View 7 Replies
View Related
Apr 28, 2010
As described here (https://help.ubuntu.com/community/MacBookAir2-1/Karmic) I've got Ubuntu 9.10 running on my Macbook Air 2,1 but the only things that don't work are the speaker and the built-in microphone. I can get sound using the line out though. I am mainly looking for a way to get my microphone working (I can live with sound only via line-out).
View 6 Replies
View Related
