I've had openSUSE for a week. The update says that there are 10 updates. When I run it, first I get a flag saying that something can't be removed. Then when I run the rest of the up date, it loops back and starts over. I need a patch to fix the patch that fixes the patch that...etc.
View 8 Replies
i have noticed that if vista is not the active partition, hybernate does not work. it just goes black and then back to the user icon screen to log back in. another "slight" problem was that i was not able to apply a service pack. after restoring vistas dominance i was able to install the pack. is there any other work arounds for hybernate? even though you might not be interested in cleaning up after microsoft.
View 1 Replies View Relatedopensuse v11.3
linux 2.6.34.7-0.3-desktop x86_64
The most recent update that produced the kernel version above is bit of a disaster for me. The open source radeon driver does not work with VirtualBox (it crashes at startup), and the ATI fglrx driver either builds without acceleration (or the X server loads it that way?) or fails to build.
Is there a way to undo some (or all, if necessary) of the update?
just updated with zypper up and smolt 1.4.2.2-6.5.1 bring back hal.i read somewhere that 11.4 is hal free..
View 2 Replies View Relatedbouncing icon and spinning icon in toolbar for 10-20 seconds, then nothing. Is there a special log file to be found for mozilla errors? (couldn't find anything useful in or near /var/log/messages or warnings all dependencies of associated programmes seem to fulfil dependencies, but obviously something isn't right. Does anyone else have the same problem?
[code]...
i am a new opensuse user from vietnam. I installed opensuse 11.3 last week, and i have a serious problem with repo. I can't enter it . It's mean i can't update (by update applet), install codec, new software, .
View 1 Replies View RelatedI just today installed OpenSUSE 11.0 on an empty drive I had (320GB) and I had Ubuntu 10.04 on another 500 GB drive, and I have now lost my GRUB menu.
Below is the output from FDISK. how to modify bootloader?
I'd prefer to boot from the OpenSUSE side and just have Ubuntu as an option.
Ubuntu (which is on sda drive) along with OpenSUSE 11.0 (which is on sdb drive):
when I launch Yast2 - Online Update, I get an error during the repository refresh that it could refresh the repository.Since it's easier to copy-paste - here is the output from 'zypper ref' with the same error:
Code:
Retrieving repository 'Updates for openSUSE 11.3 11.3-1.82' metadata [|]
Failed to download ./repodata/cefcc9d56264aa169f70a53c560ffc39cb6af575-deltainfo.xml.gz
from http://download.opensuse.org/update/11.3/
A[code]...
I recently installed Ubuntu 9.10 on a system with SUSE 11.2/11.1 and windows 2000 on it. Before i put Ubuntu on i was using the GRUB with 11.2. Now, i am using ubuntu grub. Is there any way to install GRUB from 11.2 back into the MBR.
View 9 Replies View RelatedWhenever I logoff my workstation, I log back on and my desktop doesn't come back. Only the mouse pointer and the wallpaper show up. The panel and the shortcuts don't show. I have to power off using the power button, then power back on to fix.
View 3 Replies View RelatedI logged out of KDE and started a new session in IceWM just to check it out. When I logged out of IceWM my system crashed and I had to restart. Now it logs in automatically to IceWM. If I log out of IceWM it crashes and I have to hard restart it. When I log out of IceWM it just shows a messed up nvidia logo.
View 1 Replies View RelatedI've a problem with the grub menu, I've install opensuse 11.3 on a usb HDD but the grub menu were installed on my internal HDD I've deinstal it from my internal one so that I don't have to chose between linux or windows but how can I install it back on my usb HDD?
View 2 Replies View Relatedwhile downloading the updates, jersey central power had a power failure thus screwing up my router temporarily and completely screwing up the downloads; now back up and running, the update systems is not saying I need the updates but obviously I do;how do I go back to the point to get the updates?
View 4 Replies View RelatedMy desktop computer has 2 hardrives, one 70gb and one 40gb, previously, the 40gb was windows XP and the 70gb was a backup, I decided to install opensuse on the 70gb backup, and now I want to wipe out the 40gb HDD that has windows xp and turn that into a back up.
View 9 Replies View RelatedI have a problem with GUI under SuSE. As root I can enter but as normal user I can't. So the splash occurs I put user name and password but the system try to enter and later it comes back. I try from CLI, I make startx from command line, the same situation. Sometime the system informs me about a error (a temporary file from /tmp(.X0~ )I must remove, I did but next time it tells me that it can't load one module (it gives me a number).
View 9 Replies View RelatedI've got myself in a bit of a pickle.I've got 1 hard disk drive and was trying to load a second external drive.I tried to mount the 2nd (external) drive by editing /boot/ grub/ device.map but I must have made an error, because now it boots directly into sda1 openSUSE 11.1 and when I try to look at SDA2/SDA3 it say's Invalid System Type. Presumably because they're formatted with Ext4. So I can't edit back my device.map file.What I want to do is boot into SDA3 OpenSUSE 11.3. Would anybody know why it's only booting to SDA1 and/or have any suggestions to get me back booting to SDA3? This may be a 2 step process, because I may have to boot to SDA2 first so I can edit back my /boot/grub/device.map on SDA3 before finally booting to SDA3.
View 6 Replies View RelatedI lost boot option for Opensuse. I am sure it is still installed, only thing I want to know is how to bring the boot option back. I had duel boot option for vista and opensuse now after switching on vista starts by default and I am not having any option for choosing one of them as I had before.
View 9 Replies View RelatedWhen I first installed openSUSE 11.4 the /boot directory looked like this:
I had installed VirtualBox through Yast and decoded to delete. After deleting the /boot directory looked like this, pointing now to the desktop kernel.
I went into YAST and deleted all kernel entries that contained desktop, trying to get back to the original configuration.
After doing this, the /boot directory now looks like this.
Is there any way to get back to the original kernel configuration without having to do a complete installation?
Now after my experiments with Open Indiana on another partition, I have rewrite my Suse Grub, that was as in / suse partition as in MBR. Suse partition is intact as well as files in /boot/grub, but in MBR is boot loader of Open Indiana as primary. How can I get back Suse boot loader. On Installation media under Rescue system I didn't find any option for re-installation of boot loader.
P. S. Now I can run Suse completely in Gui without any problem, because, I made some changes, in Open Indiana boot loader, but I would like return a Suse Grub.
After trying to install and partition with a live CD I restarted the PC and What do you know it reads Starting Windows 7 , Opensuse installation Completely Gone Wasted like it never even took place , and it left a gift a 100 GB less of Space on the HD . at least thats what it reads out ... how to get my full HDD back ?
View 4 Replies View RelatedMain reason I am using openSUSE currently is because my Windows system's went bad. I haven't been able to easily restore and will probably have to do clean windows install. I want to make sure my entire openSuse system (application/OS setting/etc) backup so I can easily restore of it fast. Since this type of back takes awhile, I would preferably like do this while I am still logged into SUSE. I am where to disk cloning thing like clonezilla, but looks like I would need turn of my system entirely to get this done.
Currently my SUSE root and home are in a partition with another NTFS partition on my hard drive. I really don't want to use 'dd' to clone the entire hard disk. I would much rather store of required partitions in other locations. Hopefully, there is easy to get this done without too much of effort and time.
How would I go about moving a separate home partition back to /, and be able to delete the /home partition? I'm assuming I would have to copy the contents of /home to the root partition, and change fstab at the very least.
View 6 Replies View RelatedI am trying to install OpenSuse 11.3 x64 via EFI. I successfully performed a Windows 7 install and I'm trying to do the same thing with OpenSuse now. My system boots into the EFI shell. I can cd into the /efi/boot/ folder and run bootx64.efi. Immediately after I press enter I am presented with an ELILO boot: prompt which either eventually times out and continues or I can press enter and have it continue. Either way my system resets and just boots back to the EFI shell again.
Running bootx64.efi worked for starting the Windows 7 setup but it doesn't appear to be working with OpenSuse. Is this a broken feature or am I doing something wrong?
I went to YaST>Security and Users>User and Group Management and changed my username. Now I can't do anything (open home directory, start application, login, etc). I tried changing back the username by going to YaST at init 3 and changing back to the previous username.
View 9 Replies View RelatedI had 11.3 running for quite some time without any problem. The upgrade to 11.4 was ruined for some reason (only got commandprompt login) and the message that Xorg.0.log couldn't be copied. Decided to install 11.4 from scratch, but since the install my screen flashes every 20 seconds or so to black screen and and after 1 second back to normal. There is no interruption of any other task like typing. Card: FeForce FX5200 card. Can someone please point me to a solution? Also, my monitor (Philips 150S) is not recognized. How can I change that without changing xorg.conf by hand?
View 1 Replies View RelatedI'm trying to execute some fairly simple code to transfer some files from one server to another.
$ cat xfer_directory.sh
#!/bin/bash
cd /cygdrive/g/directory/usr
[code]....
how to change the value of the inputs in sed while looping
As such:
for i in `seq 1 10`; do
"do something funny, using OpenFOAM"
cd system
sed 's/oldvalue/oldValue+increment/' -i sampleDict
cd ..
done
So basically, can you for instance create a constant "a" and increase it for every loop interval and use it for sed?
I have a csv file (id, loc, timestamp, impressions) that I need to derive some low-level calculations from. Im ok with basic sort and grep operations, but this one is challenging my feeble scripting skills (normally I�d throw it into a spreadsheet, but in this case Id like to ultimately create a script that I could automate). Ive already used cat/sort to order the csv file first on location and then timestamp so it looks like this:
Abt001, AA, 2009-01-01 10:51:00, 231
Cup002, AA, 2009-01-01 10:54:00, 3
Saf001, AB, 2009-01-01 10:51:00, 25
[code]....
What Id like to do is output to file a record of the total, min, and max number of impressions for each location. , e.g.
AA6504 3231
AB252525
AC37925109
ZZ35512341
how to do this and Im kind of stuck on how to approach it I think the combined steps of looping through the locations along with the min/max/sum calculations are throwing me. Eventually Id also like to do additional calculations like average, ect. but I think I can figure that out on my own if I can just get this part down.
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies View Relatedhow to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?
View 1 Replies View Related
