I've a problem with the grub menu, I've install opensuse 11.3 on a usb HDD but the grub menu were installed on my internal HDD I've deinstal it from my internal one so that I don't have to chose between linux or windows but how can I install it back on my usb HDD?
View 2 RepliesI started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I recently installed Ubuntu 9.10 on a system with SUSE 11.2/11.1 and windows 2000 on it. Before i put Ubuntu on i was using the GRUB with 11.2. Now, i am using ubuntu grub. Is there any way to install GRUB from 11.2 back into the MBR.
View 9 Replies View RelatedI have two separate Linux installations on my system which I can access from grub. Is there a way to get back to the grub menu to access the other system without having to reboot?
View 2 Replies View Relatedi have a intel dual core pc with 2 hdd of 160 gb each in the 1st one i have windows 7 and open suse 11.2. in the 2nd one i have a split it into 100 gb and the rest i had kept for fedora 13. i installed the fedora 13 on the 2 nd hdd even after install.i only have the option to boot into either windows 7 or opensuse .. and no option to boot into fedora 13.how to add fedora 13 menu and boot in to it...
View 1 Replies View RelatedSince i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 9 Replies View RelatedI've just installed windows on my computer for gaming, since it took over the boot loader I went into the repair system function of the opensuse DVD. Now I'm back in linux but no windows partition is showing up on the grub menu. This is the output of fdisk -l how do I make it so grub sees my windows too? This is probably an easy fix but I'm a prior ubuntu guy and just started playing with suse which seems a bit more tech savvy and less forgiving then ubuntu. code...
View 1 Replies View Relatedhave a intel dual core pc with 2 hdd of 160 gb each in the 1st one i have windows 7 and open suse 11.2.. in the 2nd one i have a split it into 100 gb and the rest i had kept for fedora 13. i installed the fedora 13 on the 2 nd hdd even after install. i only have the option to boot into either windows 7 or opensuse .. and no option to boot into fedora 13
how to add fedora 13 menu and boot in to it..
I need some help since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 4 Replies View RelatedI have got ubuntu netbook edition installed alongside windows xp and after some custimising i can now only chose the ubuntu option and no others. Can i set settings back to default settings?and how? I guess it would be via terminal commands
View 9 Replies View RelatedYesterday I've updated my system from 11.2 to 11.3, fllowing the guide at SDB:System upgrade - openSUSE . Everything went fine (except an error during the installation of batik) but after reboot I got a grub error:
And I couldn't boot
After a CD boot, because I didn't want to try the OpenSUSE 11.2 entry, I saw that the entry for OpenSUSE 11.3 was wrong, see below the entries for 11.3 and 11.2:
Code:
And of course it worked and my updated system works fine
I made a clean install of opense Suse and by mistake I overwrited the menu.lst (because of the restoration utility). As a result I have the grub error 15 : file not found, and tried everything I could think.
Grub is installed on the MBR and boots from the extended partition. The new openSuse is on sda8, there is an old openSuse on sda4 but xorg is broken. I can boot on Windows, and sda4, but not on sda8 menu.lst
Code:
Code:
Code:
Someone sees what's wrong in the menu.lst ?
I have Opensuse 11.2 installed (on hd0 at the time of installation) To install Windows 7 alongside I had to switch my hard drives (hd0 became hd1 and vice versa) What is the best approach to reinstall grub and get both Opensuse and Win7 visible in the grub menu?
View 1 Replies View RelatedI recently installed ubuntu studio 8.04 on a new partition and now ubuntu 9.10 is no longer showing up in the grub boot menu. How can I boot into ubuntu 9.10 and how do I edit the grub menu so it shows up again?
View 5 Replies View RelatedWell here's what I've done in grub.confpassword --md5 BLABLABLA /grub/admin_menu.lstNow that I enter some password, I can go to that menu and run my pvt. OS.But how to get back to original (or say public or default) grub menu?
View 1 Replies View RelatedI just installed OpenSuse 11.1 alongside of Ubuntu 9.10. After finishing up the installation I find that I can't get into Ubuntu. I have tried adding Ubuntu to the OpenSuse /boo/grub/menu.lst but it doesn't seem to be working.
View 9 Replies View RelatedAfter a fresh install of opensuse 11.3 and a xen-hypervisor and tools (all default install, nothing special) just get a black screen when I try to use kernel-xen. Default kernel runs like a charm. Xen-kernel gives me a black screen just after grub menu.
This is my menu.lst about it:
###Don't change this comment - YaST2 identifier: Original name: xen###
title Xen -- openSUSE 11.3 - 2.6.34-12
root (hd0,2)
[code]...
I have no nvidia card...
Since certainly half a year I have to add the vga=0x317 parametere at the end of the root parameter in the menu.lst file after each upgrade of the kernel and also recently after upgrading from 11.1 to 11.3. Without this, the splash screen is not shown on my HP Pavilion laptop.
View 5 Replies View Relatedadding Fedora Core 11 to opensuse's GRUB menu so that I can boot FC11 from it. Here's what fdisk -l shows:
Device Boot Start End Blocks Id System
/dev/sda1 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
[code]......
i have recently installed ubntu 9.10 and u wanted to dual boot it with xp that i already got installed i have installed it and than i didnt know how to get two my windows back becuse the grub menu didnt show and it had bugs . so i formted the ubunttu partion (to ntfs) with the live cd of it and now wiil now boot windows it showes me "grub recovery>" commend line somthing like that what to do to boot my windows back i am now with the live cd of ubuntu wrting you this.
View 5 Replies View RelatedI added an entry to grub's menu.lst and reran grub (grub-install hd0) and now my background is gone and the entries just show up like on a normal console.
I searched the forums and I couldn't find anything. Does anybody know why this happened and how to fix it?
I have not changed anything in menu.lst except for adding the new OS.
I can't turn on my PC and write jet from my neighbors notebook. Because of problems with Windows updates und ubuntu vpn I installed today Windows 7 again and then openSuse. It was OK. Than I began with set up of different Programms for windows, like WinRar, Avira Antivir ect... As soos as it was done I wanted to begin with set up of openSuse... But the start menu is gone - there is nothing there now! Last time I could choose betwee 2 windows partitions, openSuse start-partition and openSuse fall-Save. -Now there is only "grub>" line
And I doesn't have any idea what I can do, I doesnt know where are startfiles, where is /boot/grub order, I don't know how can grub be used also. But I know that if I try to register my windows 7 agan at the same day, my windows lizens would get invalid. Has someone any idee what can be done?
I've recently installed suse x64 kde in dual boot mode with windows. I have 2 primary partitions with ntfs with 1 for windows7 boot and other for data/storage. There is no boot provision for data partition. SUSE install is on extended partition. I am unable to run fdisk -l and boot info script for some reason, kde is freaking me out (used to use gnome for last 4 years). The GRUB shows data as a boot and it added an entry in its menu. I will like to remove that entry from menu list.
View 9 Replies View RelatedI have manually added an entry for Ubuntu in my grub menu, using Yast. But every time the kernel is updated, this entry disappears. On the other hand, the one for Windows, that was added during OpenSuse's installation, is still there. So how can I keep this entry for Ubuntu ?
Edit : when I save the menu configuration in Yast, I get the following message :
Code:
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kbuildsycoca4 running...
[Code]...
I have a dual boot system: windows xp and suse(10.2). I had to reinstall windows(again). When I tried to use the installer, it kept reseting my partitions to 500gb+ to linux. Nothing I tried would let me put it to the way it was(50gb to linux). Repair install failed. Update wouldn't work. MSwindows in the grub boot menu disappeared. I tried reinstalling suse. The installer blocked any attempt by me to put the partitions back to normal. How do reset the windows and linux partitions(850gb windows, 50gb to suse linux)?
View 9 Replies View RelatedNow i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies View RelatedI have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies View RelatedI don't know how, but from onw time to another the menu of the gwenview application disappear. I don't know how to bring it back.
View 3 Replies View Relatedi have noticed that if vista is not the active partition, hybernate does not work. it just goes black and then back to the user icon screen to log back in. another "slight" problem was that i was not able to apply a service pack. after restoring vistas dominance i was able to install the pack. is there any other work arounds for hybernate? even though you might not be interested in cleaning up after microsoft.
View 1 Replies View Related