OpenSUSE Install :: Unable To Login In 11.2 Using Own Kernel
Dec 10, 2009
Using the defaukt x86_64 kernel openSuSE 11.2 (uograded from 11.1) works fine.
I have compiled my own kernel using the 11.1 config with minor changes. Botting runs fine and looking at the boot.msg compared between the default and my own kernel I only see preloadtrace.ko module missing on my own kernel which I would not expect causing mthe problem.
After the boot I am unable to login on the X login screen, text console or ssh.
The X login hangs after I entered username/password. Th elogin box disaapears and the backgroundscreen remains.
On the text console (after stopping xwindows via CTRL-Backspace) I can enter the username but the password prompt will not appear.
On ssh, where I login via plublic key I will get a message that the key will be used for login and then the session hangs as well.
View 9 Replies
ADVERTISEMENT
Nov 4, 2010
This is just a nit, but I have noticed that whenever the kernel is updated, the background picture that I have set up for the login screen seems to be reset to "default_blue". No other setting seems to be disturbed.
After each update, I have to go into Configure Desktop->Login manager and set my background picture again. Why is this happening? Is there a way to fix this?
I am running Suse 11.3, KDE v4.4.4.
View 4 Replies
View Related
May 9, 2011
Using openSUSE 11.4 (64-bit). Desktop is default KDE. All of a sudden I am no longer able to login. My desktop only has one user and when I key in the password (which I am 100% sure it is correct!) I get the dreaded "Login failed" message. I followed these instructions without success: How to reset/recover the ROOT password in openSUSE | SUSE & openSUSE Following the instructions in the above link, I tried re-typing the old password and created new ones too. But I keep on getting the Login Failed message. A strange situation
View 9 Replies
View Related
Apr 28, 2010
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies
View Related
Nov 9, 2010
I am unable to boot the xen kernel but can boot the desktop kernel. The machine boots and the last message I see is:
(Xen) Created cpupool 0 with Scheduler SMP Credit Scheduler (Credit)
After this the screen just turns into a random mess. It looks like graphics memory is pointing at a area of memory filled with random data. The computer actually boots but the display is unusable and the keyboard fails (num lock doesn't work). I can cleanly halt by pressing the power button and waiting for disk activity to stop. After reading several other threads I've tried various combinations of vga=mode-0x0f00 and nomodeset but the result is always the same. I've set the vga mode to 0x0f00 as I actually get to see up to the "Created cpupool...." in this mode. The system boots without any issues with opensuse 11.2.
I'm using a gigabyte GA-Q35M motherboard and the output from lspci is:
00:00.0 Host bridge: Intel Corporation 82Q35 Express DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82Q35 Express Integrated Graphics Controller (rev 02)
00:03.0 Communication controller: Intel Corporation 82Q35 Express MEI Controller (rev 02)
00:03.2 IDE interface: Intel Corporation 82Q35 Express PT IDER Controller (rev 02) .....
View 7 Replies
View Related
Apr 14, 2010
I planned to use Squid on my W2k3 network, because I'm tired of ISA2k6.it's a factory in itself. So, I just installed a VM with OpenSuse 11.2 and joined it to my AD W2k3 domain. After correcting the clock problems, everything is running fine except a strange feature that I was not able to solve.After a reboot, I'm not able to login with a domain account. I enter the username/password, choose the domain then it the input fields become grey for 1-2 seconds then the password field is reset and nothing happens.The most strange part comes when you logon with the local root account. You login as root, then logoff and login with any domain account : works like a charm..
View 3 Replies
View Related
Jun 1, 2011
Had to reinstall 11.4 KDE 64 bit last weekend.This morning I upgraded from the default KDE (that comes with the 11.4 DVD) to KDE 4.6.3.On rebooting I am unable to login, after I enter my password the screen flickers, then I am presented again with the logon screen.
View 5 Replies
View Related
Jun 3, 2011
I have installed OpenSUSE and could able to join to Windows 2008 domain but I am not able to login to SUSE system using domain ID. It is showing "Unable to authenticate user."
View 2 Replies
View Related
Oct 4, 2010
Yesterday I updated openSuse 11.3 on my laptop. Kernel update from 2.6.34.4-0.1... to 2.6.34.7-0.3-desktop was included. Yast performed fine and at the end it stated to reboot for using the new Kernel. So I did, but what a bad surprise!! Normally the Grub menu should have been updated, but not this time. Fortunately I know how to handle this, but not all users will be able to resolve this problem, so here's what to do if this happens to you: You will run into the Text console saying: Press any button to continue... Before doing this write down on a piece of paper the text lines visible on the screen, starting with:
kernel /boot/vmlinuz-2.6.34.4-0.1-desktop root=/dev/disk/by-id/ata-Hitachi....... resume=/dev/disk........
or whatever it reads for your system. You will need this info to edit the menu and succeed to boot. Now press any key and you will get the Grub menu. The standard option will be highlighted. press "e" to edit that option. Next you will see the Grub menu lines
First press key "o" to add a new line, select it by arrow down, press "e" to edit the line. (In my case it was not possible to edit the full original line, but only the added options like vag=0x317) Enter the line you wrote down, but change the kernel's version number to the new one Should look similar like:
kernel /boot/vmlinuz-2.6.34.7-0.3-desktop root=/dev/disk/by-id/ata-Hitachi.......
(it works if you only use the part before "resume=/dev/disk....") After finishing hit Enter and you will turn bach to the Grub menu lines. Now move with the up/down arrow key to the old line, press "d" to remove the old line. Next move to the line with "initrd /boot/initrd-2.6.34.4-0.1-desktop", press "e" and edit the line so that it reads: initrd /boot/initrd-2.6.34.7-0.3-desktop press Enter to move back to the Grub menu lines. Now press "b" to boot. After booting log in, open your file manager as root, browse to /boot/grub and open the menu.lst file to edit and change the kernel old version numbers to the new one. Save it and next time it your machine will boot normally again.
View 1 Replies
View Related
Jan 9, 2010
I just recently updated to openSUSE 11.2, but after restarting my computer, I was unable to do anything with the keyboard(type my password, CAPS LOCK, Ctrl+Alt+Backspace) or move the pointer with my wireless mouse. After restarting the computer again, I turned on the touchpad of my laptop and was able to move the pointer using the built-in touchpad. After yet a 3rd restart, I could not move my pointer using any method.
After a 4th restart, I chose to enter the failsafe mode, where I could attempt to find the problem from the command line. I manually started KDM as root by typing in "kdm", but nothing happened, which means that the screen did not switch into graphical mode, but the terminal only accepted the command. Then, I manually started X as root by typing in "X", and X started. I only saw a black screen, but I could not kill X by the traditional "Ctrl+Alt+Backspace" and was forced to shutdown my computer via the power button.
I do want to note that on every boot of my machine, "WARNING" messages have begun appearing, but they went so fast that I could not read them. If there is any way to read them, I would greatly appreciate knowing. Also when updating my machine, I remember ignoring some dependencies for kernel-extra, kdm-branding, sox, and gcc44-fortran; but I did not believe that ignoring these dependencies could cause a broken system so I proceeded with the upgrade.
View 8 Replies
View Related
Jul 14, 2011
I am running OpenSuse 11.4 with Gnome3, with 2 hard drives. One is for the system and has three partitions - root, swap, and home. The second is only data storage. Last week I started getting popups stating I had a hard drive going bad. I checked SMART status in disk utility and had several bad sectors on the system drive, so I cloned the drive to a new one with Clonezilla. Here is where everything went kooky. When I booted the new disk I had a ton of errors at boot along the lines of unable to find a drive. Upon closer inspection I realized the the system located the drives by device id instead of the traditional /dev/sdx. So I started playing with grub settings but never could get it to stop looking for the old hdd. Next, I popped in my net install disc and found I could do an upgrade install which proceeded normally. When I rebooted, no more boot errors, but I get to the black screen with spinning cursor and it will not proceed any further, I even let it run overnight and when I woke up, spinning cursor. As for troubleshooting, I was able to CTRL+ALT+F2 to a console and log in as root successfully but not as a user. When I try to log in as a user, I enter my username, then password, the "have a lot of fun" flashes by quickly and I am returned to a login prompt. I logged in to the console as root and created a new user and tried logging in again, but same thing. I am able to do an ls -l on /home/mike and all my files are there and the listed permissions look ok. I am at a loss as to what to try next. My old hdd will still boot, I just pulled it to reduce risk af data loss. I have never used auto yast before but I always see the prompt for it during an install. Can I clone the system with auto yast on to a different hard drive. Does it strip the by-device-id from the image? Which logs should I check?
View 5 Replies
View Related
Aug 3, 2010
I've been trying to install Opensuse 11.3 from the Kde live cd, but the installation hangs when I'm almost done. Right at the beginning the installation is interrupted right with text that among other things says:
Bug: unable to handle kernel paging request at ffffc90010b8000. After a while though, the installation picks up and continues by itself. I'm then able to complete the necessary steps and I reboot the system so that it can complete the installation.
After reboot there is a new text message that says that the bios does not support EEC memory or something to that effect and then continues with the installation. When it has completed 82% of the autoconfiguration the installation just stops and stays that way.
I've had no problem installing previous releases, from 10.2 up to 11.2, on the same machine.
I've checked md5 sum and also checked the media before proceeding with the installation.
Upon reboot after the first installation step, I also tried the failsafe mode but got the same result.
View 9 Replies
View Related
Apr 25, 2011
This is completely baffling me..I have a Lenovo Thinkpad X301, which has been running OpenSUSE 11.1 for a while, with vanilla kernels from kernel.org, built and installed in the standard (i.e. not SUSE) way.
A week ago, I dupped to 11.2, and also installed kernel 2.6.38.4 . This was compiled with the gcc-4.3 available under 11.2. Everything worked fine (after the necessary messing around to get X working again).
This weekend, I dupped to 11.4 (via 11.3, of course). After more messing around to get X working again, things were working ok - using the same 2.6.38.4 kernel I'd built under 11.2. I then re-built the kernel. It appears to compile and install ok, and I haven't changed the configuration or the grub configuration. However, it doesn't load. Normally, I just get a blank screen after grub starts it loading. If I boot in basic VGA mode 0, then I get a few lines of messages before it hangs - it hangs complaining about APIC not connected to io bios, and if I boot noapic, it gets a few lines further before hanging after some message I don't know about (allocating 4 HET). I don't suppose that's relevant, anyway.
I've tried three different gcc versions, and two different linux versions (2.31 as well), and the same thing happens. This sounds like something going badly wrong with ld or as or something - but I don't see how anything could have happened that wouldn't have been noticed by thousands of others.
View 5 Replies
View Related
Aug 16, 2010
Our Sled 10.1 server is running as a VM on VSpher 4. After a power outage we can not log into the server we get the Error in Module message. I can however disable the nic card for the server in the vm console and the system logs in with no problem.
View 2 Replies
View Related
Dec 5, 2010
i enabled gnome desktop effects ignor the warning and now i am not able to login to genome dektop. 1.how to disable desktop effects by commands. ALSO sometimes i get this error could not update ICEauthority file /var/lib/gdm/.ICEauthority. 2. how to solve this bug.
View 2 Replies
View Related
Mar 9, 2010
My computer
AMD phemom II 955 X4 Black Edition 3,2 Ghz
Asus M4A785TD-M EVO micro atx
Kingston 4Gb Ram DDR3 1333 mhz (KVR1333D3N9K2/4G)
Disco Duro Western Digital 1 terabyte
LG GH24 Super Multi DvD rewriter
menu.lst
fstab
fdisk /dev/sda
Orden (m para obtener ayuda):
Bios
I have Sata=AHCI
Sometimes it starts and sometimes not. the RAM is memtest OK. The test detects a firmware in the micro hole 15 to 16 mb of memory. The rest is OK.
View 7 Replies
View Related
Jun 8, 2010
i am using Ubuntu maverick and upgraded to kernel version 2.6.35.1 via update manager i am unable to login after the upgrade the screen goes blank after selection of kernel and nothing seems happening however i am able to login using previous kernel version 2.6.34-5
View 3 Replies
View Related
Sep 2, 2010
I recently decided to try out OpenSuSE after a few years of using kubuntu. However, upon lanuching the install disk I get the following kernel panic: "kernel panic-not syncing VFS:unable to mount root fs on unknown-block(3,1)". I am using the 64-bit DVD install and I have verified the md5 of both the download and the disk itself. The specs for my computer are:
Core 2 Q6600
4gb ddr2 RAM
MSI P6N-SLI motherboard
Nvidia GTX 480
View 9 Replies
View Related
Dec 11, 2009
default in openSUSE 11.2 we have installed kernel-desktop. This kernel is optimized for the desktop.
What is the name of kernel optimized for server machine? In my case Firebird database + Apache + PHP?
View 9 Replies
View Related
Feb 11, 2010
A few days ago yast did update my computer to a new kernel-desktop 2.6.31.12-0.1.1.
My mainboard is an ASUS P4P800-VM with Intel ICH5 chipset. This new kernel is not able, to poweroff my computer. Older kernels were able to poweroff the computer.
How can I roll back to the older kernel? Yast does only offer the recent kernel.
In /boot there are only files of the recent kernel.
ASUS P4P800
Intel Pentium 4 HT, 3000 MHz, Frontside 800 MHz/Cache 1 MB
3 GB Ram
AGP nVidia 7600GS/512 MB, nVidia driver 190.53, installed from yast.
PCI WLan TP-Link 951N (Atheros chipset, WLan N, driver ath9 was automatically installed)
View 7 Replies
View Related
Nov 17, 2009
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies
View Related
Jan 6, 2010
When I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest
View 6 Replies
View Related
Jun 18, 2010
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
View 7 Replies
View Related
Jun 3, 2011
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
View 5 Replies
View Related
Jun 23, 2011
when I get into the login page, I can only see the background and the login box in the middle of the page just turns whole white and keeps flashing. no response for any clicks. I was force to ctrl+alt+F1 to switch to init 1 to do my work. But I still want to use my graphical desktop either KDE or Gnome is ok. I am using gnome.
View 5 Replies
View Related
Dec 8, 2009
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies
View Related
Jan 4, 2010
Every account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies
View Related
Feb 3, 2010
The graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
View 5 Replies
View Related
Jun 2, 2010
i'm using OpenSuSE 11.2 and was wondering if there is anyway to set remote login as the default login method.
View 9 Replies
View Related
Jun 13, 2011
when i login to openSUSE a window named login keyring appears and it asks me root password. it happens everytime when i login. how to fix this problem?
View 9 Replies
View Related
