all of the following are made through live usb creator. when i tried with F11 i686 live kde, I got the following error: Bug: unable to handle kernel when i tried with F11 x86_64 live kde then at the time of installation my screen got blurred.
View 4 RepliesI am trying to install F12 on a Dell Latitude E5400 laptop. It got through the whole install process, but when it rebooted i just get a screen that says
"unable to handle kernel null pointer dereference"
and it just hangs there.
Does anyone have any idea what this is? I'm running F14 kernel 11-83, everything else is rock solid but I get this crash randomly, sometimes it runs for days no problem other times it crashes within a few hours.Someone recommended I run memtest86, I did for 24 hours and it showed no problems.
View 6 Replies View Related[Note: I'm typing this entire thing out. It probably isn't 100% verbatim. And I am using an older version of the kernel because 2.6.30.9.96 was not behaving either.]
Code:
BUG: unable to handle kernel paging request at efd86f5c
*pde = 00000000
[code]....
since upgrading to Fedora 11 I keep getting this error:
Code:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000041
IP: [<ffffffffa01fab94>] sync_request+0x1/0x8de [raid456]
PGD 49435067 PUD 494f6067 PMD 0
Oops: 0002 [#1] SMP
last sysfs file: /sys/devices/virtual/block/md0/md/sync_speed
CPU 0
Modules linked in: ip6table_filter ip6_tables ip6t_REJECT nf_conntrack_ipv6
[Code]...
I am trying to install CentOS 5.3 on a computer where I successfully installed Windows XP.
Booting from the DVD I got the following error:
[<c0458f3c>] serial8250_init+0x6d/0xe4
[<c041abd4>] init+0x25/0x69
[<c041f46b>] ret_from_fork+0x1eb/0x73c
[<c04597eb>] init+0x181/0x19b
[Code]....
I've been trying to install Opensuse 11.3 from the Kde live cd, but the installation hangs when I'm almost done. Right at the beginning the installation is interrupted right with text that among other things says:
Bug: unable to handle kernel paging request at ffffc90010b8000. After a while though, the installation picks up and continues by itself. I'm then able to complete the necessary steps and I reboot the system so that it can complete the installation.
After reboot there is a new text message that says that the bios does not support EEC memory or something to that effect and then continues with the installation. When it has completed 82% of the autoconfiguration the installation just stops and stays that way.
I've had no problem installing previous releases, from 10.2 up to 11.2, on the same machine.
I've checked md5 sum and also checked the media before proceeding with the installation.
Upon reboot after the first installation step, I also tried the failsafe mode but got the same result.
Here's the text from the serial console before I rebooted:
BUG: unable to handle kernel paging request at ffff8140320234b8
IP: [<ffffffff802b0a13>] dentry_iput+0x26/0x9d
PGD 8063 PUD 0
[code]....
My root server is using CentOS release 5.2 (Final), kernel 2.6.26.5-rootserver-20080917a, SMP, 64-bit This Oops happened yesterday and before that it happened on March 14th of this year, and before that on January 31st of this year, so a repeating pattern. On the January 31st Oops, I just rebooted. On the March 14th Oops, I reformatted the two swap partitions as follows: mkswap -c /dev/sda2; mkswap -c /dev/sdb2 On this last Oops, I turned off the swap for 24-hours, then decided to turn it on again after doing the above mkswap again. During the previous uptime, I had dumpcap packet capture running, but this last reboot, I'm not going to run it.
I use a pretty fresh installed RHEL 5.4, which should be very similar to Fedora. After the basic installation I installed xen and xen-kernel via yum with no errors. I can select the xen-kernel at boot time. But after booting the normal kernel shows up.
[root@noname boot]# uname -r
2.6.18-164.11.1.el5
My /boot/grub/menu.lst looks like:
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
[code]....
I can't see anything wrong and I did not change/try anything.
A FC10 server hung and had to be power-cycled. I suspect it hung because of an nfs mount timeout.
Now it does not boot. The error is libc.so.6 not found. Kernel panic. Attempting to kill init.
Booting under rescue:
ls: cannot access libc-2.8.so: Stale NFS file handle
Is there a way to reboot to a clean state? There must be some NFS cache file.
I also tried to cp rescueCD:/lib64/libc-2.8.so to the old lib64 dir, but get the same "Stale NFS file handle" message.
I'm wondering if there is any application being able to handle compressed SWF files. If I try it with mencoder (mplayer), it tells me:[swf @ 0x91a0a30]Compressed SWF format not supported No way in Fedora Core 11?
View 3 Replies View RelatedI am trying to install Fedora12 on a usb hard-drive, the first problem I encountered was that the hard-drive would not boot stating "kernel panic: unable to create root device", this is just using the standard fedora 12 install and mostly clicking next (although I add my vista to the grub and tell grub to install to /dev/sdc which is the location of my usb hdd).
I have also tried livecdtousb (wont boot in stick and wont recognize removable hd as removable)
I have tried setting up disc encryption and installing with no LVM.
The drive has this same problem with ubuntu 9.10 however ubuntu 8.10 installs perfectly and I am guessing earlier versions of fedora will too. The problem is that I would like the kernel features of Fedora 12 (mainly modesetting) without this issue.
I have played about with grub and quite like disabling LVM and using the uuid of the drive to select the root partition, my boot partition has 500mb, I have a 2gb swap space 50gb ext4 root partition & 27gb fat32 partition code...
I pre-upgraded a working F14 system which was reading MPEG4 xvid (xvidcore rpm). Since the upgrade gstreamer refuses to handle that stream: ** Message: don't know how to handle video/x-xvid.It seems the codec is not registered with gstreamer.
View 1 Replies View RelatedI am running FC13 on a fairly old PC (PIII 500MHz, 384MB RAM, 10GB SCSI disk). It works fine using kernel 2.6.33.5-112.fc13.i686.PAE. After a series of recent updates the system now also has a new kernel 2.6.34.7-56.fc13.i686.PAE.
/boot/conf/grub.conf contains:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
code....
When I try and boot to the newer kernel I get an error like:
Kernel panic - not syncing VFS Unable to mount root fs on unknown block(0,0)
I read on the forum about a similar problem where the fix was to insert the line
initrd /initramfs-2.6.34.7-56.fc13.i686.PAE.img
but this file doesn't exist and so the boot then hangs with no messages, so I took this line out again. Here is contents of /boot:
$ ls -l
total 21148
-rw-r--r--. 1 root root 111391 May 27 04:06 config-2.6.33.5-112.fc13.i686.PAE
-rw-r--r--. 1 root root 112291 Sep 15 04:32 config-2.6.34.7-56.fc13.i686.PAE
drwxr-xr-x. 3 root root 1024 Jan 23 2010 efi
code....
As you may deduce from the above I haven't used the system much so the auto-update hasn't run for several months.
Any help on running / installing the newer kernel appreciated. Note that I am trying to install a wireless LAN card and am following instructions here: url
I got as far as
cd /lib/modules/`uname -r`
ls -l
which gave:
[root@localhost 2.6.33.5-112.fc13.i686.PAE]# ls -l
total 3300
lrwxrwxrwx. 1 root root 51 Jun 3 00:52 build -> ../../../usr/src/kernels/2.6.33.5-112.fc13.i686.PAE
drwxr-xr-x. 2 root root 4096 May 27 04:08 extra
drwxr-xr-x. 11 root root 4096 Jun 3 00:52 kernel
code.....
so I have the src files for the newer kernel not the one I am running. I thought it best to stop and think (and ask for help!) rather than break a working machine (but with no wireless LAN!)
I have a Compaq Presario 8000 with an Nvidia Geforce FX 5950 Ultra on which a year ago I upgraded from Fedora 6 to Fedora 9, and this broke the Nvidia driver, since Fedora 9 was shipped with an X server incompatible with Nvidia. I went back to the 2d driver to get X working, and it sat that way for the past year. But recently I wanted to do some 3D work and decided to install Fedora 12, which hopefully has an X server that works with Nvidia.
I decided to do a cold install, re-partitioning my 80G hard drive at the same time. I backed up my data, ran the install CDs with no errors, and booted the system, with an immediate kernel panic: Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
Doing a Google search, I found over 8,000 hits for that message combined with the keyword Fedora. Several of the hits were on Bugzilla: [URL] I then booted the install disk, chose rescue mode and did - chroot /mnt/sysimage
[Code]....
I need to understand southbridge related code in linux source code.
For that I have downloaded Linux source code version:2.6.28 .
I have seen the code but didn't find code specific to southbridge handling.
Is Linux source code contains southbridge specific code?If so where can I find the code?
For the past several days the Package Updater has popped up wanting me to install an update to iceweasel. Each time I try to do the iceweasel-31.8.0esr-1-deb8u1 (64-bit) I get the following error message:
E: Internal Error, ordering was unable to handle the media swap
Is there something I need to do?
I have installed the fedora 14, but there is no kernel source tree.I read the doc "building a custom kernel".But I don't want to rebuild a new kernel.I just want to install the source tree of current kernel.Could someone tell me the way?
View 6 Replies View RelatedTrying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.6
Deleting module version: 3.1.6
completely from the DKMS tree.
Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source ->
/usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found
at
/lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12.
code....
there is an issue with the way the Linux Kernel addresses memory by default and the graphic drivers for my Asus G1Sn. I have a patch that I had compiled against a custom kernel for 2.6.27.xx how ever it does not work with the latest kernel in Fedora 11. It is beyond me to rewrite the patch to work with a different kernel.
View 1 Replies View Relatedi am using Ubuntu maverick and upgraded to kernel version 2.6.35.1 via update manager i am unable to login after the upgrade the screen goes blank after selection of kernel and nothing seems happening however i am able to login using previous kernel version 2.6.34-5
View 3 Replies View RelatedI had problems with booting my PC after kernel updates several times. In the past I just reinstalled Ubuntu and after several tries with running Update Manager things were working again.This time I applied another recommended set of updates, including a kernel upgrade and got the usual "Kernel Panic - not syncing: VFS: Unable to mount root fs on unkown-block(0,0)"After booting from a LiveCD and running boot_info_script I rebooted again and this time I am getting tons of errors which seem to be generated while running grub. After a few minutes of 'error: syntax error' and 'error: Incorrect command' scrolling through my screen, grub gives my a grub> prompt... Not what I expected!Here is the output of the boot_info_script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
=> Grub 2 is installed in the MBR of /dev/mapper/isw_cagifdjehe_Volume0 and
[code]...
I have two RAIDed disks (mirrored and showing OK during POST). The disk shows above as a6071eb5-6fc6-45b3-babb-c1a2156278d7. Ubuntu 10.10 installs fine from a LiveCD, but gets broken by kernel updates. I can see the original 1 TB disk when I start with the LiveCD and I can access all the files.
I'm having problems to install SCST in Fedora 11.I'm not able to apply the kernel patch because there isn't a file called drivers/scsi/scsi_lib.c in the /usr/src/kernels/2.6.29.4-167.fc11.i868.PAE.Does anybody have an idea on how to proceed?
View 3 Replies View RelatedAfter running update last night from 2.6.35.9-64 to 2.6.35.10-68 my laptop fails to start. Boot process goes most of the way to startup and then hangs just before login screen. Not sure what else to give as far as info.
View 12 Replies View RelatedMy VMWare Player was working fine After updating the kernel it is throwing the error "Unable to build kernel module" my kernel is 2.6.40-4.fc15.x86_64 what to do?
View 2 Replies View Relatedi was trying to install kernel 2.6.29.1 on fedora 14 but it is giving error. First download a package with kernel and i saved in home/user/linux. Afterwards i can extract this package.
1.tar -xvzf linux-2.6.29.1 -C /usr/src
2.cd /usr/src/linux-2.6.29.1/
3.make menuconfig
4.make
5.make modules_install
6.make install
after above steps i got this error.
ERROR: modinfo: could not find module ip6t_REJECT
ERROR: modinfo: could not find module nf_conntrack_ipv6
ERROR: modinfo: could not find module ip6table_filter
ERROR: modinfo: could not find module ip6_tables
ERROR: modinfo: could not find module ipv6
ERROR: modinfo: could not find module fuse
however it gives initramfs,vmlinuz-2.6.29.1 and System.map-2.6.29.1 in /boot folder and menu.lst in /boot/grub is updating according to new kernel. when i reboot my machine and selects the kernel 2.6.29.1 it shows FATAL:kernel too old [1.591633] Kernel panic-not syncing:Attempted to kill init
I've been trying to install Ubuntu Server on an old server since a couple of days and have been unsuccessful. I've google'd a bit but found no solid solution yet to this problem. Everything goes fine and I'm able to partition my SCSI drives and everything. After the installation starts unpacking and copying files this happens. I have to mention that I'm installing from a USB drive with the following added at the end of the normal install options:
Code:
--install cdrom-detect/try-usb=true
Version I'm trying to install: Ubuntu 9.10 i386 Server
CPU: AMD Athlon XP 2000+
RAM: DDR 2*256MB
MOBO: ECS K7VTA3 VIA KT266A socket A DDR
I'm looking for the .config file for the kernel which ubuntu uses to compile the standard generic kernel which is delivered in compiled form. I downloaded the following kernel archive ( 2.6.31.8 ): [URL]... I need the original file, because I'm not able to configure a working kernel, so I want to try to compile the kernel with the standard configuration. Afterwards I'm going to change some options.
View 5 Replies View RelatedUpgraded to latest kernel 2.6.32-23. Ubuntu 10.04 I run a twinview video configuration of 2 screens @ 1920x1200. On booting, X wanted to go to low res for the session, which reverted to one screen (that is, I lost the twin view), but actually kept the 1920x1200 res on the one. I restarted X on got both screen working with the second as a replica of the first. Something has changed in this version of the kernel. Reverted to the previous Kernel version (22) and all is sweet (twin view is back working). But this can only be a temporary workaround.
View 9 Replies View RelatedIf i use yum update option it upgrades to latest kernel but i only want to upgrade to kernel-2.6.31.6.
View 8 Replies View Related