OpenSUSE Install :: R600_cp: Failed To Load Firmware "radeon/R600_rlc.bin"?

Apr 20, 2011

I installed openSuSe 11.4 on a Lenovo W500 and noticed this error message upon bootup. The desktop login doesn't make it to the screen. I went into fail-safe mode as root. I know the issue is attributed to the R600_rlc.bin located in /lib/firmware/R600_rlc.bin. I attempt to make some config changes but the file is in binary. It could be a problem associated with the creation of the initrd but not certain. It's a dual-boot system running Windows 7 on the other partition

View 1 Replies


ADVERTISEMENT

General :: R600_cp: Failed To Load Firmware "radeon/R600_rlc.bin"?

Feb 27, 2010

Fedora 12, Kernel 2.6.33 stable. When i compile this kernel with radeon and KMS enabled i get the following:it take a whole minute for it to fall back to non kms setting, but what worse is the it won't find the damned firmware. i have this bin file almost every directory (/lib/firmware(redeon)) have in the the main source tree of the kernel before compiling and after. i tried to build it into the kernel (ext_firmware) blobs but no F...ing luck.

i've googled all night alongside compiling new kernel with diff settings (10 hours O.o run ) and no luck... there was something on mailing list the they are not going to include this firmware in the kernel ever(only git or something) and placingfirmware into the appropriate directory should fix everything.On the side note: i had Arch linux installed just recently (dont ask why i have swithched arch was perfect but: not LSB , thus ..well doesnt matter) nad i had 2.6.33.rc8 installed with KMS and all was freaking perfect... it had no problem finding that stupid firmware..

Code:
0.671784] [drm] Clocks initialized !
[ 0.672054] [drm] Detected VRAM RAM=256M, BAR=256M

[code]...

View 14 Replies View Related

General :: Arch Update Failed - Error "firmware: /lib/firmware/radeon/R700_rlc.bin Exists In Filesystem Note That In The Beginning"

Jul 4, 2010

I can't my system because of this error: Code: linux-firmware: /lib/firmware/radeon/R700_rlc.bin exists in filesystem Note that in the beginning, it asks:

Code: :: Replace kernel26-firmware with core/linux-firmware? [Y/n] There are so many updates by now that the list fills in a few pages in the terminal! Also, I wonder why so many Arch updates get stuck or broken compared to almost any other distro? Is it poorly designed packages? Is it a design flaw in pacman/the package format?

View 6 Replies View Related

Debian Configuration :: Failed To Load Firmware Iwlwifi With Kernel 4.1.0-trunk

Jul 14, 2015

I installed linux-image-4.1.0-trunk, when I boot into the kernel there's no wireless available. Dmesg indicates seems like the firmware is loaded, although firmware-iwlwifi is installed:
...
[ 11.047031] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-7265D-13.ucode (-2)
[ 11.047039] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2

View 5 Replies View Related

OpenSUSE Install :: Gnome 3 Failed To Load - Error

Apr 12, 2011

I just installed opensuse 11.4 64 bit. Compiz and everything was working fine on my ati card (mobility 2600) with the default radeon drivers. I added the gnome 3 stable repo, updated fine. But when I rebooted I get booted into the fallback with no 3d effects and it says "gnome 3 failed to load" What gives? The drivers were working fine with full acceleration. I know gnome 3 works on this card, I tested it on the fedora live cd just fine.

View 5 Replies View Related

OpenSUSE Install :: While Checking Xorg.0.log Found I810 Module Is Failed To Load?

Dec 15, 2010

I have installed suse 11.2. Sometimes while using (firefox, okular, open office etc) x server restarts & comes to login screen. While checking Xorg.0.log i found i810 module is failed to load. Is this causing the x server restart?

View 9 Replies View Related

Debian Installation :: How To Force Load Realtek-firmware Driver During Install

Dec 25, 2015

Now, my issue is that I have no access to ethernet in my apartment so I need to rely on wifi for my install. But during the install when it is looking for the network hardware it never sees the TP-Link Dongle and never asks if I wan to load the firmware. I even tried it with the CD image that has the non-free drivers included but it never asks for the drivers. Any other distro, like Linux Mint 7.3, sees the dongle fine.

So is there a way to force load the realtek-firmware drivers during install?

View 14 Replies View Related

Ubuntu / Apple :: Failed To Install ISight Firmware Tools

May 9, 2010

Once I download and install isight-firmware-tools. I am supposed to redirect it somewhere. I tried keeping the default thing set, but it failed to install that way.
(MacBook 3,1. 10.04 LTS)

View 2 Replies View Related

OpenSUSE Hardware :: Firmware Test-Don't Understand / Failed To Locate HPET Base

Oct 17, 2010

I ran a firmware test, after I discovered a bad memory stick on a 1 gb stick. Replaced my memory stick and just for grins ran a firmware test and I don't understand this:[Fail] Failed to locate HPET base [Fail] OS/2 memory hole test-The memory map has a memory hole between 15mb & 16mb.

Re-ran MEMTEST just to make sure my new memory was fine, no errors.My Linux OS appears to be running slower on boot-up than normal, What documentation there is on the internet on HPET is over my head.I ran SMART on the both drives. They were good. So I am a little stumpted.

View 3 Replies View Related

General :: Where Is Firmware Driver Located For ATI Radeon

Apr 21, 2010

Where can I find the firmware driver RS780_pfp.bin for ati/radeon? [URL please]
Trying to resolve this message.

[ 2.880560] platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
[62.880180] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[62.880262] [drm:r600_startup] *ERROR* Failed to load firmware!

View 2 Replies View Related

Ubuntu Multimedia :: Failed ATI Radeon 9500 Driver Install?

Mar 23, 2010

I (somewhat foolishly) decided to reformat windows XP and make my foray in the Ubuntu world with Ubuntu 10.04 Lucid just last week. It has treated me fairly well so far and with the help of others posts have been able to get most everything setup to my liking. However...My Problem:I tried to install the ATI drivers for my radeon 9700 using ati-driver-installer-9-3-x86.run. I tried to install it using the Ubuntu/9.04 settings, hoping that I could get it to work like that and I was quite wrong. When I restarted my computer I was started in simple graphics mode, and now I'm trying to set things right again.'ve un-installed the fglrx drivers (I think...) and now I'm stuck. Play On Linux tells me that I need to install 3D acceleration, something I know my graphics card has..

View 1 Replies View Related

OpenSUSE Hardware :: 11.3 RS690: ERROR Radeon: Ring Test Failed

Nov 22, 2010

I had no 3D acceleration on my AMD system with RS690 IGP graphics. I'm using 64-bit install and desktop kernel, 2.6.34.7-05. Snippet from dmesg:

[Code]...

View 1 Replies View Related

Debian Hardware :: ATI Radeon 9200 Fails With Firmware Installed Under Jessie

Jun 30, 2015

As the subject states i have a desktop with a radeon 9200 card, when i install the firmware-linux-nonfree the system hangs when x starts(sometimes you can see the login manager, sometimes not, but you cant login at all) and i cant access any of the terminals ctrl+alt+f(1-6), after removing the firmware-linux-nonfree package the system boots, but the graphics are under software render...

View 3 Replies View Related

Debian Hardware :: Poor 2d Performance Lenny Radeon 9600 Firmware?

Jun 15, 2010

i had recently loaded squeeze and had an issue with the 2d performance.i.e when being prompted for the root password, the shading slowly draws down the screen several times before stopping at the final darker shade. i then added the linux-firmware-nonfree package. all worked extremely well, even compiz, but i don't really care about compiz. i just loaded it to see how it performed. i then distro-hopped a bit and when i came back to squeeze the first thing i did was add the package, but the video is acting like i haven't added the package. i've searched for an answer, but have not found anything recent to indicate if xorg was upgraded or what.stable lenny works fine, but i'd rather have the nice console fonts when not in x and more up to date apps like gimp and xsane in squeeze.

View 5 Replies View Related

Debian Installation :: Radeon Graphics Chip - Jessie Requires Firmware-linux-nonfree

May 11, 2015

If you have a Radeon graphics chip and upgrade to Jessie, install firmware-linux-nonfree, before rebooting.

My dist-upgrade to Jessie seemed flawless until I rebooted and couldn't get into X.

Seems Jessie boots into Gnome by default, but Gnome now requires 3-D acceleration. For my Radeon graphics chip (ATI Radeon 3100), this requires firmware-linux-nonfree, which I didn't need before and was not installed as part of the upgrade.

A boot message alerted me to this need.

I was able to get X going with xinit. I used FVWM; for XFCE I believe the command is:

xinit /usr/bin/xfce4-session -- :1

and from there I installed the package firmware-linux-nonfree.

View 2 Replies View Related

Debian Hardware :: Radeon X1050 - Is This Card Supported In Squeeze By Either The Non-free Firmware Or The Proprietary Driver

Jan 13, 2011

Is this card supported in Squeeze by either the non-free firmware or the proprietary driver? I just got one to stick into an older box that will be going to a college girl that wants the 3D desktop in KDE. The built-in video was a joke and wouldn't even work without compositing. It was one of those crappy, non-standard pieces of crap known as a "Unichrome" (not the pro).

View 10 Replies View Related

OpenSUSE :: Failed To Load Slide: Freedesktop?

Mar 5, 2010

i am trying to run compiz it runs but i get this error

compiz (cube) - Warn: Failed to load slide: freedesktop

and then most of the plugins dont work . kwin uses alot of cpu resources so i am using compiz

View 9 Replies View Related

OpenSUSE Hardware :: The Exact Error Message Is: "Failed To Extract ZIP Archive" Or "Failed To Load File"?

Apr 13, 2011

I think I'm ready to install Linux openSUSE physical on my Laptop. NO VMware Workstation anymore...But before I can do that I must be sure that Linux works on my System.--- SYSTEM ---

System: TOSHIBA Satellite A300D-13A (PSAK4E-01F00VGR)
CPU: 2x AMD Turion� 64 X2 Mobile Technology TL-64
--- NETWORK ---

[code]....

OK, should be enough for the first, ask if I forgot some Hardware...Because I can't find any driver, and I'm not sure. I'm a LINUX NOOOOOOOOOB!!I really want to install Linux openSUSE, I'm MICROSOFT/WINDOWS HATER since 1 month now!! PS: Wine can't start my favorite Programs like Project64 a N64 Emulator. It fails to start a game! I think the graphic plugin crashes... | The exact error message is: "Failed to extract ZIP Archive" or "Failed to load file".

View 7 Replies View Related

Networking :: Zd1211rw Cannot Load The Firmware

Jan 31, 2010

I have an Airlink101 AWLL3026 and the zd1211rw driver. When I insert the USB card, it is recognized but syslog indicates that the firmware wasn't where is was expected.I am running an updated Linux Mint system (based off of Ubuntu): Linux hoverfly 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686 GNU/Linux Plugging in the USB Wifi adapter results in the following on syslog:

Jan 31 19:04:08 hoverfly kernel: [105617.584051] usb 1-7: new high speed USB device using ehci_hcd and address 9
Jan 31 19:04:08 hoverfly kernel: [105617.740521] usb 1-7: configuration #1 chosen from 1 choice

[code]....

View 3 Replies View Related

OpenSUSE Install :: Failed To Load Module "fglrx" (module Does Not Exist, 0)

May 8, 2011

I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:

Failed to load module "fglrx" (module does not exist, 0)

I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?

View 5 Replies View Related

OpenSUSE Hardware :: NVidia GeForce2 GTS / Pro Driver - Failed To Load Module "nvidia" (loader Failed, 7)

Feb 17, 2010

I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"

[Code]....

View 9 Replies View Related

OpenSUSE Install :: 11.2 And Kernel Firmware Installation

Dec 27, 2009

Wonder if it is advisable/mandatory to install the kernel-firmware package, on a 11.2, with following installed kernel:
2.6.31.5-0.1-default #1 SMP 2009-10-26 15:49:03 +0100 x86_64 x86_64 x86_64.

View 8 Replies View Related

OpenSUSE Install :: Firmware Test Reported 4 Errors

Nov 29, 2009

After installing 64 bit 11.2 with no apparent problems: computer hangs up on desktop boot opensuse 11.2-2.6.31.5-0.1, however I can boot from failsafe opensuse 11.2-2.6.31.5-0.1. I had problems trying to install Ubuntu so I checked out the opensuse. I do not know if this is an easy fix! I decided to avoid buying anymore windows system software. I ran memory test with no problems. The firmware test reported 4 errors. I have windows XP installed on other hard drive - no problems there.

View 5 Replies View Related

OpenSUSE Install :: A Lot Of Troubles During Inst. (FIRMWARE Errors)?

Feb 19, 2010

I am getting crazy with my system.(I got the machine from previous guy working on it with XP, I installed myself linux, but with zero experience, 2 years ago).starting point yesterday:3 HDs in raid, SUSE 10.3 x64 installed on sdc1 with problems, XP on sda, SUSE 10.2 x32 on sda as well:

Code:
Disk /dev/sda: 250.8 GB, 250808893440 bytes
255 heads, 63 sectors/track, 30492 cylinders

[code]....

View 3 Replies View Related

OpenSUSE Install :: Saving The Result From The Firmware Test Of 11.2 DVD?

Jul 12, 2010

From the start-up manual I know the Firmware Test Starts a BIOS checker that validates ACPI and other parts of your BIOS. I noticed there are 3 failures in the result. (The font size on the screen is too small for me to read.) I got stuck in trying to save to either of the two choices provided with names I don't understand. I had to use the three-finger salute to bail me out.

View 4 Replies View Related

OpenSUSE Install :: Installing 11.3 64-bit Version On A Macbook Pro (5,4 Firmware 1.8)?

Aug 13, 2010

I am trying to install OpenSuse 11.3 64-bit version on a Macbook Pro (5,4 firmware 1.8). The laptop will only run Linux and no OSX so I want to use the entire disk for OpenSuse. With that in mind, during install I switch to expert mode:

1. Delete all partitions
2. Create a new "msdos" partition table
3. Create sda1 as ext4, format and mount "/" on it
4. Create sda2 and assign it as swap partition
5. Continue the remaining install as normal.

After reboot, grub loads up but boot hangs at:

Error 13: Invalid or unsupported executable format

For context, I have tried Fedora and Ubuntu on this laptop and both hang at "Uncompression Error -- System halted" error. I ran memtest on the laptop and all LiveCDs run fine on it so that rules out hardware issues. My guess is that with Fedora and Ubuntu, both use grub2 and there is some complication with grub2. CentOS and OpenSuse seem to use grub and that gets me as far as loading the kernel but then boot hangs after initrd loading at the error above.

View 2 Replies View Related

Debian Hardware :: Load Firmware For BCM Card With No Internet Connection

Jun 19, 2014

I performed an update that has caused issues with my wireless. Errors relating to wireless firmware missing and consequently no internet connection.

I've been through this before with my 2008 macbook air BCM card whose firmware isn't included in installs. In the past I've manually installed the b43-fwcutter package an extracted some firmware... That doesn't seem to be working here.

I've used [URL]i ... cefirmware to troubleshoot. I have not been able to get b43 or wl to work.

I attempted to install the "firmware-b43-installer_015-14.1_all.deb" package; however it depends on wget to download and install "broadcom-wl-5.100.138.tar.bz2" from wlfinger.com.

So I manually installed b43-fwcutter and used it to extract the broadcom-wl-5 file referenced....

modprobe wl says wl doesn't exist and modprobe b43 doesn't seem to work.

Details:
Code: Select allname-a
Linux air 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u2 x86_64 GNU/Linux
lspci -nn
02:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n [14e4:4328] (rev 05)

Other things I've tried:

Code: Select allsudo dpkg -i broadcom-sta-dkms_5.100.82.112-8_all.deb
Setting up broadcom-sta-dkms (5.100.82.112-8) ...
Loading new broadcom-sta-5.100.82.112 DKMS files...
Building only for 3.2.0-4-amd64
Module build for the currently running kernel was skipped since the
kernel source for this kernel does not seem to be installed.

I tried something from broadcom that produced make errors "/lib/modules/3.2.0-4-amd64/build: No such file or directory"... I think this means I need some kernel development packages, broadcom says:

Code: Select allOn Fedora install 'kernel-devel' (Development Package for building kernel
modules to match the kernel) from the Package Manager (System->
Administration-> Add/Remove Software).

On Ubuntu, you will need headers and tools.  Try these commands:
# apt-get install build-essential linux-headers-generic
# apt-get build-dep linux

I'm having trouble install this stuff without the net and not sure installing generic headers and build-dep outside of apt-get is the way to go... linux-headers-3.2.0-4-amd64_3.2.57-3+deb7u2_amd64.deb has alot of dependencies that would take me a while to find and download.

View 8 Replies View Related

Ubuntu Multimedia :: Install TVT3 Dual TV Tuner - Failed To Load?

Sep 1, 2011

I've Googled myself silly and I cannot find a dang thing on how to install. I've got a Dell Dimension 4700 with the Emuzed TVT3 Dual TV Tuner, and I've dual booted with Mythbuntu for use with MythTV. Though I have been unable to find any way to install the capture card. I have gone into the settings (and even after reading the wiki), I'm not 100% sure what to select. Not to mention, where it says probed, it shows failed to load.

View 4 Replies View Related

General :: New Install Of Debian Failed To Load Grub Troubleshoot Options

Mar 21, 2010

I tried to install debian on my system using a small image at first that would download all the necessary components during the install. It loaded everything except Grub, and wont boot. I need to rescue this as the downloading of all the components took ages and I don't want to do that again.

View 1 Replies View Related

OpenSUSE Install :: Subprocess Failed. Error: RPM Failed: Installing Package Xen-4.0.0_21091_06-0.1.1.x86_64?

Oct 14, 2010

Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved