OpenSUSE Install :: Home" Partition On The 11gb, Covering Only 10gb On The Beginning Of The Drive?
Jun 22, 2010
i have 2 harddrives. a 6gb and an 11gb. IDE ATA. i want to install opensuse 11.2 on them, using EXT4, in a different way this time. i want the "/" partition to cover all of the 6gb, with the drive set to master. For the slave, I want the "/home" partition on the 11gb, covering only 10gb on the beginning of the drive, and i want the swap space partition on the end of the drive using 1gb. Is this a smart way to install it? Will i have to continuously mount the drive with home and swap on it? What is the best configuration for using these two drives?
View 9 Replies
ADVERTISEMENT
Jan 14, 2010
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies
View Related
Mar 2, 2011
i got my powermac g3 up and running as a file server, i added a sata card and two 250GB hdd's which i promptley formatted as ex4, today i noticed one of the drives (the empty one) shows as having 11gb used, at first i thought it was a artifact of samba, but i cheacked the atual comp and ubuntu shows the drive as having 11GB used but it is compleatley empty? i then cheacked the outher drive which about 30GB of data on it, but it shows as having 40GB used?
View 8 Replies
View Related
Dec 9, 2010
I have a physical drive of about 40GB, I want to create a partition of 10GB with FDISK on this drive.
View 2 Replies
View Related
Jul 22, 2011
So the first 10Gb of a 450GB NTFS partition have just accidently been written over with an Ext4 filesystem that spans the entire partition instead. all foolishness asside, what can be repaired. Now I know Ext4 likes to jot bits of meta-data down (inodes blocks) along the way, and this can be about 5% of drive capacity, that said, there's alot of small text files and stuff, coe files so forth that can surely be recovered
I've looked into magicrescue and testdisk, but they fall into the only two groups to exist:
1) Filesystem independent, that is search almost like a patern - well exactly like a pattern match, to find the header and footer of files.
2) Filesystem recovery tools, like, damaged bootsector, so forth
I need one, that will be able to extract files, Iunderstand this will be a hard task, but.... text files; surely that'll be easy, anyway. This is my backup drive, they''re both WD you see, anyway. This is important, given the coding is ASCII surely.
View 4 Replies
View Related
Dec 28, 2009
I was looking to do a fresh install of 11.2 and use my home partition from 11.1. During the Gnome Live version I wanted to see how suse would configure my computer. It recognized everything fine, except it didn't show my current home partition which is ext 3. Because Opensuse 11.2 has switched to ext 4 as default for root and home? I was hoping to use my old home with 11.2. Is there any way to make the switch without losing my settings? During the live install the partitioner didn't use my current home partition, it was going to make a new one.
So I opened up the partitioner in yast to see why it didn't use my current home and it shows no mount point for my home ext 3. Would changing the mount point on my ext 3 partition to home make the 11.2 installer recognize this as my home to use? Or will I have to copy my current home. Paste it elsewhere. Delete old home. Use unallocated space as ext 4. Paste old home on new ext4 to have the 11.2 installer recognize this as my home. So, current home is ext 3. 11.2 installer wants to make a new home on ext4. How do I use my current home settings? I haven't installed yet just tried a live run.
View 4 Replies
View Related
Mar 27, 2010
I was recently forced to do a reinstall of OpenSUSE. As part of that I backed up the folders I needed to keep. The installation however didn't format the 'Home' partition though. At first I thought it was nice, but I've run into trouble with a program I most definately need to get working. So my plan is to re-install yet again.
how to make the install format the root partition I think it is, and the 'home' partition, so I can start fresh.
To further complicate things My laptop (which this is happening on) is dual booting between OpenSUSE and Windows 7. It is VERY important that the windows partitions remain.
View 9 Replies
View Related
Sep 29, 2010
I'd like to reinstall openSUSE 11.3 on a pc and would like to preserve the /home partition. The current partiton structure is
sda1 /boot
sda2 /swap
sda3 /extended partition
sda4 /
sda5 /home
When the installer gets to the point to set up the partitions it offers something like
sda1 /
sda2 /swap
sda3 /home
I'm not sure which option to take now. I assume I choose the option to edit the partitions but I'm not clear how to preserve the /home as it's now got a different partition number or does that no matter as long as I choose not to format it? Also, to replicate the original partition structure I'd need to delete the partitions and add them in the correct order but would that destroy the /home?I'm a bit confused with how it will work.
View 2 Replies
View Related
Dec 28, 2009
This is strange. I moved OS 11.1 from an old 150 GB PATA drive over to a 500 GB SATA using Parted Magic. The old and new partitions were
Code:
OLD:
/dev/sda1 - 19.99 GB, mounted as / (root partition)
/dev/sda2 - 97.82 GB, mounted as /home
/dev/sdb1 - 29.52 GB, Windows XP
NEW:
/dev/sda1 - 29.30 GB, mounted as /
/dev/sda2 -292.97 GB, mounted as /home
/dev/sda3 - 45.82 GB, Windows XP
I used the "Clonezilla" tool on the Parted Magic live CD to move and resize the partitions. To my delight, everything appeared to transfer just fine. I can boot into OpenSUSE 11.1 (though not into Windows, but that's not really important; I'll figure that out later), but my /home partition won't mount. I'm set to autologin, and I get the expected error: "can't access /home/stephen" (or something like that). Here's the weird thing. I can ALT-F3, get a terminal and manually "mount /dev/sda2 /home", go back to ATL-F7 and log right in, so I know the disk is fine. (I've already 'fsck'd everything, by the way, and they're clean.)
I've used Yast's partitioner about a dozen times, trying "device by ID" and other settings. I always get the same thing when I reboot. On this last reboot, when it refused to log into /home, I ALT-F3'd, logged in as root, did a "cat" on "/etc/fstab" and entered the device-by-id line exactly as I saw it there and it mounted the /home directory just fine! ALT-F7, logged into KDE. I'm typing this in KDE now. Works fine. I so rarely need to reboot this machine that I can manually mount the /home partition, if need be, but (obviously) I'd like it to be mounted automatically during the boot.
Here's my /etc/fstab:
Code:
/dev/disk/by-id/ata-Hitachi_HDP725050GLA360_GEA534RV0DJ4LA-part1 / ext3
acl,user_xattr 1 1
/dev/disk/by-id/ata-Hitachi_HDP725050GLA360_GEA534RV0DJ4LA-part2 /home ext3 acl,user_xattr user,acl,1 2
/dev/disk/by-id/ata-Hitachi_HDP725050GLA360_GEA534RV0DJ4LA-part3 /windows/C
ntfs-3g users,gid=users,fmask=133,dmask=022,locale=en_US.UTF-8 0 0 .....
I don't see anything obviously wrong here. The fact that I can take that second line and do a manual "mount" shows me that the device ID is at least correct. Just to be clear, here's what I entered in virtual terminal 3 as root to get my home partition to mount:
Code:
mount /dev/disk/by-id/ata-Hitachi_HDP725050GLA360_GEA534RV0DJ4LA-part2 /home
and it worked fine. Exact same line.
View 9 Replies
View Related
Mar 3, 2010
I'm trying a fresh install of 11.2 but I couldn't figure out how to make the whole installation on the same logical extended partition.
It always wants to create a separate /home partition.
I have a second HDD with NTFS only for backup purposes, but the installer puts a grub entry for it too (windows 2). And this HDD is not even bootable. I don't have the balls to try to boot from it and see what happens. How to get rid of it?
View 2 Replies
View Related
Jun 2, 2010
I have two partitions where I can install (e.g. versions of openSUSE). I have a Swap and a /home partition to be shared by both. Thus e.g., while still running 10.3, I could install and test 11.2. Once I switched over to 11.2, I still can use 10.3 when need arises (not done for monthes now). I have the 10.3 partition mounted, thus I can stilll see what was in /etc/.... on the 10.3 system from the 11.2 system if need arises.
I gave the file systemss on those two partitiions different labels to better keep them apart. It is in the first place up to you to design how you want to partition your disk(s) to facilitate such a feature. Has someone done a thing like this (especially sharing /home partition) with openSUSE and Ubuntu? Is there a How-To anywhere? Until now I have the /home folder of Ubuntu not on a separate partition but under the system/root partition "/" of Ubuntu.
View 9 Replies
View Related
Jul 18, 2010
Im using suse 11.1 with /home on a separate partition. To move my /home to a larger partition it looked easy to use Yast partitioner. I copied all /home/ files first to the new partition and backed-up fstab.
with Yast I unmounted /dev/sdb6 = /home and mounted it to /local
then unmounted /dev/sda4 = mynewhomepartition and mounted it to /home
checking the new fstab it looked fine but after a restart it did not work and I got an error. resetting the original fstab resetted the system as it used to be. My question is: why does it not work, are there (hidden) files with the old or other settings?.
View 4 Replies
View Related
Feb 23, 2011
I'm upgrading to 11.3 (from 11.2) and will be keeping my current home partition. Will this keep my browser favorites? Also, I read somewhere that in order for things to work properly after upgrading (without reformatting my /home partition) that I would have to keep the same username AND user UID...? Is that true? How do I make sure I have the same UID if so...?
I purposely set up a seperate home partition so that when I changed distro's or upgraded I would still have my files, and some settings intact. (I switched distros a lot when I first started using Linux.) I set up a "bin" folder (in home folder) that had a couple of programs I had downloaded to keep from having to set up and configure everything all over again every time I felt like changing distro's as well.
View 9 Replies
View Related
Apr 30, 2011
I mistakenly removed my /home of openSUSE while trying to install another distro. My root pertition is OK. openSUSE is shown in grub. but i cannot boot into it as there is no /home is there any way to fix this without removing my openSUSE?
View 9 Replies
View Related
Jul 24, 2011
First off I'm new to the openSUSE community and would just like to say So, to the issue at hand. I recently switched to openSUSE 11.4 from Debian. I noticed the setup didn't have an option encrypt the home folder like it does in Debian, so not being aware of any other way to encrypt it, I created a new partition, backed up my current home directory, created a new partition and mounted it as home before copying in the contents of the backup to the encrypted home partition I created. Now of course it is askingme to put the crypto password in at each boot, which isn't ideal because it's a family machine and no-one would remember the password but me. Is there any way of being able to automount the encrypted partition without having to put the key in every time? Or better yet an encrypted home folder that doesn't require the key to be put in on each login (as in Debian) without even using a dedicated partition.
View 4 Replies
View Related
Jan 13, 2010
want to install 11.2 version. my machine config is as belows. pentium 4 with 1.8 gz, 512 ram and 15 gb hard disk. i want to know what should be the partition size specially for swap, root ,home etc.and what version i.e genome or kde should i install.
View 1 Replies
View Related
May 10, 2010
How would I go about moving a separate home partition back to /, and be able to delete the /home partition? I'm assuming I would have to copy the contents of /home to the root partition, and change fstab at the very least.
View 6 Replies
View Related
Jul 17, 2010
I just installed suse 11.3 on formatted partitions (5GB swap, 30GB / and 500GB /home). Just after the installation, My computer showed 25.2GB of /home to be used. When I do:
Code:
dyn-0a2a1f40:/ # df -h .....
That seem to be roughly correct because since yesterday I've been running a program that constantly writes logs and other data files and plots, which might have accumulated a few GB's. It is also collaborated by the output of
Code:
dyn-0a2a1f40:/ # du -sk /home
10548452 /home
I'm not hard-up on space right now but storage has been dear until the recent past. Also out of curiosity, the size of the /home partition is shown as 493 instead of the 500GB allocated while the swap also lists only 4GB instead of 5GB. Below is the output for fdisk -l in case anyone needs it:
Code:
dyn-0a2a1f40:/ # fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x219b052d .....
I have Linux 2.6.34-12-desktop x86_64 and KDE 4.4.5 (which I had previously used in 11.2 without any problems) and 4.0GB RAM.
View 9 Replies
View Related
Feb 5, 2011
When I loaded opensuse 11.3 for the first time, I used the automatic partitioner and have been loading app's onto my ~8GB boot partition, and now that it's full, I have ~15 GB free on my home partition and need to install a few more app's to get my laptop fully functional. Is there a way (other than copying the boot partition to the home partition and then repartitioning, copying again to the repartitioned drive, and then recopying again to the freed up space) to get the new app's I install to redirect to my home partition?
View 9 Replies
View Related
Oct 14, 2010
When running the umount command like this as superuser: umount /dev/sda8. get the following message:umount: /home: device is busy.(In some cases useful info about processes that usethe device is found by lsof(8) or fuser(1))
View 9 Replies
View Related
Jun 14, 2011
I have a dual boot windows XP/OpenSuse 11.3 system running from a hard drive. They are both 32 bit in spite of the fact that the system can run 64 bit.
I would like to upgrade to Windows 7 64 bit (the wife insists, not yet a Linux possibility) and OpenSuse 11.4 64 bit, but having the programme files on an SSD for faster loading, with my data files on the existing hard drive.
I'm happy with the notion of getting the SSD going as a dual boot system. With Windows, as I understand it, it can tell it fairly easily where to look for the "my documents" folder on the hard drive.
However, the Home directory in Linux is not quite the same. How (if it's possible) could I run the SSD but use my existing Home directory on the hard drive?
View 9 Replies
View Related
Jan 2, 2010
When trying to install 11.2 from DVD, the user information I entered at the beginning of the install gets lost. I get to the Automatic Configuration step at the end of the install where the computer needs to reboot, and it asks for my user ID and password (it shouldn't do that). It won't accept the user I created (always says login failed), but it will accept root. That really doesn't matter, because the Automatic Configuration step has done anything, and I have a busted install. I've tried the install 4 or 5 times, but it is always the same problem. I eventually reinstalled 11.1 without any problem (though I did have to click Use Entire Disk on the partition section so it would delete the ext4 partitions created by the 11.2 install and create ext3 partitions).
View 3 Replies
View Related
Apr 25, 2010
I am installing a new hard drive to replace my old one that contained the /var and /home directories. I don't want to copy the whole directories, especially from home because there is a lot I don't need in it.What I need to do is set the mount points for the two partitions I have made on the new drive to /var and /home, but it will not let me do this with the other drive still running. I can't unmount /var and /home while the computer is running, and I would guess that having two drives with /var and /home on them would not work.
So, how can I set the mount points on the new drive and copy the files I need from the old to the new one? It would seem that would require two /home partitions to be mounted at the same time, but I don't think that is possible. I am sure there is some way, probably many ways knowing Linux so please,
View 9 Replies
View Related
May 5, 2010
Saw a reference to putting the swap partition on a separate drive--just minutes after I was considering that approach. Can't find anything recent on the topic, so asking: Is there an advantage to having /swap on a separate HD from data on /home? My thought was that both disks could be active at once, perhaps speeding up a busy application.
View 1 Replies
View Related
Sep 6, 2010
I just added a 2nd SATA drive to my openSuse 11.2 desktop. What do I do now to partition and format? I want to partition some of the new drive for linux, and leave some of it unpartitioned for Windows (I dual boot). I want to leave my existing 1st drive as is. What tool do I use? How do I proceed?
View 4 Replies
View Related
Feb 22, 2011
I am new to linux , I installed Suse 11.3 a week ago on my new iMac 27'' core i7 and my experience have been wonderful so far. However I would like to install windows beside Suse (for games and windows only apps). I used bootcamp to create a 200G partition for Suse, and I would like to partition the bootcamp further to install windows beside Suse, and choose the OS at boot time using rEFIt. I searched google and couldn't find a guide for installing windows 7 when linux is installed first.
1- I want to learn how to partition the boot camp drive using suse to create an empty partition for windows install.
2- I want to learn how to install windows 7 on the mentioned partition without harming any boot configurations, as I said I want to be able to choose from the OSes at boot time using rEFIt bare in mind that the current installed OSes are suse 11.3 and OS X.
View 3 Replies
View Related
Oct 30, 2010
I have an existing install of 10.4 on a 320 GB hard drive without home in it's own partition. I have a new 500GB hard drive that I want to install 10.10 on. After installing 10.10 and making /Home on it's own partition can I copy the entire old home folder including the hidden files to the new home partition on the new hard drive so that all of my programs and files are saved. I don't have enough room left on the old hard drive to create and copy home to a new partition. Am I going about this the right way or do I need to rethink and do some kind of backup restore on the new hard drive or some other way. I am trying to accomplish this so that in the future I can install a clean copy of Ubuntu when they are released without losing my current settings and files. I started out with 7.10 but my learning curve is slow.
View 2 Replies
View Related
Apr 17, 2010
I just wonder how to best partition a harddrive with essential folders.
My current installation has a layout like this.
The rest is in '/' integrated.
Does it make sense to give more folders a own partition? And if so, how much should you apply to each folder?
There are 2 users on the computer and there is nothing special or big installed.
I have currently 2 more harddrives which host music/picture & movie data's.
The reason for my question is just that i want to save my data in case of one folder failing.
View 3 Replies
View Related
May 22, 2011
I would like to ask you if there is a robust way to mount as a drive a ext4 partition inside windows 7 and if it is possible to use it also to storing window's 7 data.
View 3 Replies
View Related
Aug 18, 2011
KDE 4.6 - opensuse 11.4.
I have a separate ext4 partition which contains all my data (music, movies, etc). When I delete files from this partition it is very slow because it copies files from my data partition to the Trash folder in my home partition. How can I avoid this? Can't the trash be configured so that it uses a trash folder in each partition instead of copying files to another partition (which is slow).
View 9 Replies
View Related
