OpenSUSE Install :: Login With Fingerprint With 11.4?
Mar 28, 2011
I have a thinkpad T510i with fingerprint reader. The device is detected by opensuse 11.4. I have enabled the reader in yast, went to the user management, selected my user and started the fingerprint plugin to read my fingerprint. The readers green led is on and it asks me to move my index over the reader. When I do this, it says registering fingerprint done, do it again, Sucessful prints: 1 (the equivalent in german). Ok, I do it again and the message changes to Successful prints: 2 and so on until it says fingerprint was sucessfully registered. And now? This is all i get:
Code:
$ su - joba
Could not locate any suitable fingerprints matched with available hardware.
Passwort:
I cant find fingerprints anywhere on the disk. Where should they be located? What names would the files have?
View 2 Replies
ADVERTISEMENT
Sep 10, 2009
currently using, openSuSE v11.1 kde v4.3.1.i have, bootsplash, splashy, kdm4 installed.im trying to install the 'fingerprint' theme upon boot.I have autologin enabled for kde. I've tried to install it via splashy, 'splashy_config --set-theme fingerprint' and it works when i do 'splashy --test fingerprint' but when i reboot it doesnt implement it. same old green theme.have also tried to install it through 'login manager' it says its loaded but again, reboot and same default opensuse green logos. ive been following instruction from the theme located at kde-look.org. it looks fantastic.
View 4 Replies
View Related
Mar 25, 2010
I just installed openSUSE 11.2 KDE when I tried to enable fingerprint authentication yast didn't ask me to swipe my finger it was working properly on GNOME.
View 2 Replies
View Related
Feb 13, 2010
I have installed openSuSE 11.2 and my fingerprint reader have been detected on Hardware Information. But when I try to enable it on "Fingerprint Reader", it throws an error: Cannot write PAM settings as you can see on the following pic:
Is there a way to solve this problem?
View 1 Replies
View Related
Feb 17, 2010
KDE4.4 Community Repo Key ID or Fingerprint information so I can verify the recent key update I received?
View 1 Replies
View Related
Aug 12, 2009
Does any one know about fingerprint in HP dv4 to work.
fprint is installed but didnot detect the reader.
Code:
lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
View 2 Replies
View Related
Nov 17, 2009
My OpenSUSE 11.2 is working fine as samba server, no problems, but I have a problem with KDM.My default init runlevel is set to 5 and every time I try to login at KDM (KDE4), the monitor goes black and returns to the login screen.If I hit Ctrl+Alt+F1 to go to console and start /usr/sbin/console-kit-daemon manually, press Ctrl+Alt+F7 to return to KDM login, everything is fine.What do I have to do to fix this issue?
View 5 Replies
View Related
Jan 6, 2010
When I try and login at the main login in prompt after boot, it just returns me back to the prompt again.
If I login as root it's fine...OpenSuse: 11.3 Kde: Latest
View 6 Replies
View Related
Jun 18, 2010
been using 11.2 with KDE on a Sony laptop since 11.2 was released always ran perfect suddenly I can't login, I get to the login screen type in password it begins to load my desktop, then fails and dumps me back to the login screen I can login as root, all my stuff is there (under /home/me) I tried changing my password, no luck I went to run level 3 and there I can login just fine seems to be something with my KDE profile
any ideas where I might find some error messages telling me what's going on?
this seemed to happen when I was running "blender" and making the machine do some heavy number crunching, it actually locked up.
View 7 Replies
View Related
Jun 3, 2011
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
View 5 Replies
View Related
Jun 23, 2011
when I get into the login page, I can only see the background and the login box in the middle of the page just turns whole white and keeps flashing. no response for any clicks. I was force to ctrl+alt+F1 to switch to init 1 to do my work. But I still want to use my graphical desktop either KDE or Gnome is ok. I am using gnome.
View 5 Replies
View Related
Dec 8, 2009
I want, when I boot up, to load and log-in automatically a default user. I get a login in screen with the option to login as root, I do not want this. How do disable the option to login to X as root and just load as me/default user?
View 9 Replies
View Related
Jan 4, 2010
Every account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies
View Related
Feb 3, 2010
The graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
View 5 Replies
View Related
Jun 2, 2010
i'm using OpenSuSE 11.2 and was wondering if there is anyway to set remote login as the default login method.
View 9 Replies
View Related
Jun 13, 2011
when i login to openSUSE a window named login keyring appears and it asks me root password. it happens everytime when i login. how to fix this problem?
View 9 Replies
View Related
Sep 17, 2010
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
View 2 Replies
View Related
Feb 24, 2011
installation opensuse 11.3 and kde 4.4 after update to kde 4.6, work fine, but problem is login screen is low like 640x350...? i wanted to change from lowtion to high 1024x768?when i start opensuse and begin to login was low resolution and log in my user and it's low resolutiona dn i change screen from setting system (kde) after change high display is works fine and rebbot same low resolution for LOGIN MANAGER how i can change it??
View 1 Replies
View Related
Dec 20, 2009
Just installed 11.2 on my Thinkpad T61 and during install the mouse pointer (synaptics) works fine but not the mouse buttons. After the install on every first login the pointer works but not the buttons. If I restart the gui and try to login into gnome again then all works agin. But it always fails on the first login and gnome sessions
View 3 Replies
View Related
Aug 16, 2011
when i login, Ubuntu asks to install 3D Drivers for my grapics card. Can i make a script in openSUSE to do this as well? Or even better, check for drivers on startup and then install the drivers for the graphics card on boot.
View 5 Replies
View Related
Mar 10, 2010
In the process of installing 11.2 over 10.2 everything goes fine until I reach a login screen. There I provide my previously supplied username and password and the result is logon failed. I have tried the install several times. The result is always the same.Login also does not work from console. Some surfing has provided the suggestion that the old Grub may still exist on the machine. If so, how do I get rid of it?
View 8 Replies
View Related
Apr 17, 2011
I install Novell-Client-2.0-sp2-sle11-i586.iso for Linux on My IBM T23 with SUSE 11.2. I test it with Open Server 6.5 SP8 and SUSE Enterprise 11 both have Novell eDirectory 8.8.Know I can't login I get a error message "Module in unknown" can't you help?
View 1 Replies
View Related
Jan 3, 2010
I'm using openSuse 11.2, KDE, x64 and, all of a sudden, my user accounts stop working!
My first acc, 'bidu' stopped at login. It asked for the pass of kWallet, and then nothing! The screen freezes. So I created another user, 'biduzido'. It worked fine until yesterday -.- Today I can't login with it. I type the pass, the screens turns black and then it shows the login screen again. I can login with the root.
View 5 Replies
View Related
Mar 8, 2010
I am running GNOME Desktop on a openSUSE 11.2. I was trying to compile drivers for my intel 945g and suprisingly after a reboot i wasn't able to login as any other user except root. Here are the things that i installed after the file DJz HBK - Step Up 2 - Bounce. And One More Thing After I Updated openSUSE This Error Keeps On Coming on the screen. when i run gconftool-2 -R /desktop/gnome/peripherals/keyboard/kbd i get
_XKB_RULES_NAMES_BACKUP(STRING) = "evdev", "evdev", "us", "", ""
_XKB_RULES_NAMES(STRING) = "evdev", "evdev", "us", "", ""
and when i run xprop -root | grep XKB i get
layouts = [in]
options = []
model =
View 9 Replies
View Related
Apr 16, 2010
I just updated my 11.4 installation to the newest KDE 4.6.1 from the KDE46 repos.
But know when i get to the login screen and i write my login information,i will just get a black screen and then get the login screen again.
I think i had the same problem with 4.5 on Kubuntu, and it was solved by reinstalling kde-base (I think, i can't remember) but i tried that from a console login. I can login again if i downgrade to KDE 4.6.0.
View 2 Replies
View Related
Dec 21, 2009
when I try to startup the xserver in normal mode iget a message "Invalid MIT-MAGIC-COOKIE-1 giving up. xinit: Resource temporaily unavailable (errno 11): unable to connect to X server xinit: No such process (errno 3): Server error."
I dont know what this means except that something does not work.
View 1 Replies
View Related
Feb 9, 2010
i was having problems with filesharing with virtualbox, so in another thread someone told me to uninstall the OSE additions and install the vbox additions on virtualbox. I have uninstalled the OSE additions and now i can't get graphical login, it is all on runlevel 3.
View 3 Replies
View Related
Apr 25, 2010
Been using 11.2 for a couple of months now, mostly I've solved my own problems or read from some preexisting already solved problems on threads like these. But, I'm not even sure where to start with this one. I cannot login under my main username, the account is set to autologin, and I get the login screen instead. When I attempt to login I get a black screen for about a second then it bumps me back to the login screen, no error messages. I'm able to login under runlevel 3, but as soon as I try to "init 5" it bumps me out and back to the login screen.
Root account works fine, and I used it to create a secondary account from which I am posting from right now. The behavior started after the system put the display to sleep while I was watching a movie in VLC, I woke it up just as it turned completely black, it hung there and I was forced to hard reboot. Had the problem ever since (for several hours now, lol).
I use Gnome but I installed KDE to see if it would resolve my problem, but no dice.
View 7 Replies
View Related
Jun 7, 2010
I have a problem that I can not join openSUSE11.2 with KDE. the problem accour after i try to abort a software then I restarted the system.
I get the following message:
Code:
Could not start Kdeinit4. Check your installation.
I also try to repair the system file from the DVD without any success
View 9 Replies
View Related
Jun 15, 2010
I have a problem which has developed after just updating.When I try to log into KDE (as part of normal startup, etc), I instead get the error message:
Code:
Call to lnusertemp failed (temporary directories full?). Check your installation.
It then kicks me back to shell login. This also shows another error message which I'm
[code]...
View 1 Replies
View Related
