Debian :: Setting Up Info Of Local Repo In Installation
Apr 15, 2010
I've created a local repository, my web server (apache) is up and running and my repo is inside it, so I want to install debian using it, in the stage of enter manually the info of the debian mirror I put:
1. debian archive mirror hostname:
192.168.10.1
2. debian archive mirror directory:
/repo
But after this, the installation tell me that it doesn't find the repo, I tried several ways, like: http://192.168.10.1; /repo/; /repo/ binary/ but nothing. What is the correct syntax to use my local repo?
View 1 Replies
ADVERTISEMENT
Sep 10, 2011
I can't seem to update the repository indexes regardless of which official server/mirror I use. I pick one server from the built-in software sources list and then I get this:
W:Failed to fetch ftp://ftp.fi.debian.org/debian/dists/squeeze/updates/contrib/source/Sources.gz
Unable to fetch file, server said 'Failed to open file. ' [IP: 130.230.54.99 21],
W:Failed to fetch ftp://ftp.fi.debian.org/debian/dists/squeeze/updates/non-free/source/Sources.gz
Unable to fetch file, server said 'Failed to open file. ' [IP: 130.230.54.99 21],
W:Failed to fetch http: [URL] 404 Not Found [IP: 128.30.2.36 80],
W:Failed to fetch http: [URL] 404 Not Found [IP: 128.30.2.36 80],
W:Failed to fetch http: [URL] 404 Not Found [IP: 128.30.2.36 80],
W:Failed to fetch ftp://ftp.fi.debian.org/debian/dists/squeeze/updates/main/source/Sources.gz
Unable to fetch file, server said 'Failed to open file. ' [IP: 130.230.54.99 21],
E:Some index files failed to download, they have been ignored, or old ones used instead.
Now how can that be? Shouldn't the built-in repository addresses be correct? My installation is one week old clean install. Since then I've installed broadcom wlan-drivers (I tried repo update w/ wired connection too) and Dropbox but other than that I'm pretty clean.
View 2 Replies
View Related
Feb 13, 2011
I have a local repository, and declare also a remote one, I want to tell to apt-get to install a package from a local repo, if it exists. it seems that it begins from the remote. here is my sources:
deb file:/home/CD1 squeeze main
deb file:/home/extra6 /
deb http://ftp.fr.debian.org/debian squeeze main non-free contrib
View 1 Replies
View Related
Aug 8, 2011
I am trying to create a local debian repo for 3rd party apps and my own deb's. I have done the following: dpkg-scanpackages debian | gzip -9c> debian/Packages.gz Which did create a file called Packages.gz in the directory However, when I do apt-get update on a client machine I get the following error: W: Failed to fetch [URL] Could not connect to 10.1.1.10:8080 (10.1.1.10). - connect (111: Connection refused) W: Failed to fetch [URL] Unable to connect to 10.1.1.10:8080: W: Some index files failed to download, they have been ignored, or old ones used instead.
View 1 Replies
View Related
Jul 15, 2009
I'm having trouble installing Fedora 11 using the URL method. When I put in a F11 netinstall CD, or even Disc 1, I press tab on the first option and add "askmethod" to the end of the text. Each time I point the installer to my local FTP and press enter after typing in the FTP url, the installer just hangs there. I've even tried deleting ALL the files from the F11 folder on my FTP server and downloaded ALL the files at:
ftp://ftp.linux.ncsu.edu/pub/fedora/...edora/i386/os/
Still...the same thing.
When I pointed the installer to:
ftp://ftp.linux.ncsu.edu/pub/fedora/...edora/i386/os/
Everything worked fine, albeit slow as it was DL from the NCSU FTP server.
Am I doing something wrong with my FTP server? It is anon, so there is no authentication issues.
View 5 Replies
View Related
Mar 14, 2009
I have successfully installed fedora 10 and have rpmfusion in my /home/ directory. i don't know how to edit yum.conf to make yum install from this local repo. i tried once. But when i tried to install vlc i got an error saying some lib****** files are missing and missing dependencies.
View 2 Replies
View Related
Mar 13, 2010
Each time i type yum search <something> .. some 2 to 3 mb are dloaded.. is that updates of the repos configured? how do i stop it updating each time ?
View 3 Replies
View Related
Jun 4, 2010
I have been trying to set up an old pIII 700Mhz PC as a local intranet server to run some PHP code.
I have got debian installed setup ssh since it is a headless computer mounted a usb hard drive to store the web page remapped apache2 to use the /mnt/sda1/html/ folder and tested that php scripts are running
now what i can't seem to get working is the following:
ftp access to /mnt/sda1/html so I can upload files from my pc on the network and
phpmyadmin so i can easily manipulat mySQL databases.
after reading [URL] I typed in #apt-get install phpmyadmin
it downloads a bunch of stuff and says it is installing it but when i do the next step in the instructions go to
http://192.168.0.100/phpmyadmin/
I get a 404 Not Found error.
View 3 Replies
View Related
Jul 9, 2010
I noticed a red triangle at the top right of my screen today and I've been trying to sort out the problem. is says "update information is outdated" I used the update like it suggested but get this error msg. I'm new to ubuntu/linux so explain in simple terms: "Could not download all repository indexes. The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct. [URL].. 404 Not Found Some index files failed to download, they have been ignored, or old ones used instead."
View 4 Replies
View Related
Nov 24, 2010
I'm using 10.10 i386 on hp pavilion dv9620us. The top panel keeps showing a red triangular caution alert that when moused over reads: "The update information is outdated. This may be caused by network problems or by a repository that is no longer available. Please update manually by clicking on this icon and then selecting 'Check for Updates'and check if some of the repositories fail." I had clicked this button a few times. The first time it installed a kernel update. The next couple times I don't think it did anything but check for updates.
View 2 Replies
View Related
May 7, 2011
Code:
W: Failed to fetch [URL] 404 Not Found
[Code]....
View 8 Replies
View Related
Aug 1, 2010
I do know how to set up the traditional Window shares by modifying fstab and mkdir /mnt/share. What I was wondering in this day of laptops, if there was a script that could find and mount Window shares that were hooked into your local network, but only on a temporary bases. Something like what you would do mount a usb connection, such as a camera that you had the drivers for. I do know that networks are more complex, was just interested if something like that was developed yet. Just to let you know that my scripting skills are zero, and my ability to do so less.
View 1 Replies
View Related
Jan 11, 2010
I've just set up the local mirror for my 96 CentOS 5 workstations. The mirroring script is taken from public-mirror howto and looks like this:
#!/bin/sh
rsync="/usr/bin/rsync -avHzL --delete --delay-updates" # replaced -q with -v for debuging purposes, removed --bwlimit, added -L to follow symlinks
mirror=centos.politechnika.lublin.pl::CentOS # tried several different same result
[Code]....
I tested mirror consistency by putting the mirror addres I'm syncing with, directly into repo file. Than yumex works fine. I tried several different mirrors with the same result.
View 3 Replies
View Related
Aug 18, 2011
I'm trying to build a local YUM repository for RHEL 6 and am running into an issue. I can get the repo to build, but I cannot get the gruoplist. I can't find a comps.xml file to run the createrepo -g command against, like there is in RHEL 5. Here's what I have so far:
mkdir /yumrepo
copied RHEL 6 DVD contents to /yumrepo/rhel6
createrepo /yumrepo/rhel6/Packages
(repo builds its lis of 3500+ packages)
yum list shows the lsit of all files within the repo correctly.
I run gpk-application, and I receive the error "The group list was invalid." I need to create the group list. But I can't figure out how? Can someone please explain what I'm missing here? Never had this much trouble with 5, but I know a lot has changed with 6.
View 4 Replies
View Related
Sep 13, 2010
I have created a local repository to install linux with. (class assignment) Created the following file structure off of /html directory;
/yum/base/13/i386
/yum/updates/13/i386
copied the contents of the packages from my fedora dvd;
mount /dev/cdrom /mnt
cd /mnt/Packages
cp -v * /var/www/html/yum/base/13/i386
cd /
umount /mnt
using rsync against fedora mirror updated the base to have compete set of .rpm packages from the Everything directory. Ran createrepo /var/www/html/yum/base/13/i386 Verified repodata folder was created and the contents are correct, shown below
[Code]....
Boot the PC and start the install using a kickstart file (if you need to see it let me know), all runs fine until it gets to the point of resolving dependency then it errors out - unable to resolve dependency against the repository. May not be the exact phrasing but generally speaking to that effect.
View 2 Replies
View Related
Mar 10, 2010
I down loaded Debian 5.0.4 and burned it to CD (several times I might add till it was right) and now the computer I'm putting it on wont acknowledge it as a boot disk and load. It does not have a problem with my windows cd, which has a crack and the start of all my problems, But not the Debian CD-1 disk. what now? The computer is an IBM thinkpad a22p. Everything works as far as I can tell. But I was going to reinstall Windows and failed in that because of a small crack on the edge of the disk that stopped the install and any hope of accessing the file on the laptop. Microsoft does not support windows xp any longer, you must buy windows 7, but the ibm will not run it due to processor speed and ram limitations. But it will run linux and I'm willing to try it just to get out of microsoft control.
Idon't know what else to do. This is the link to where I downloaded the software ( [URL] ). The others five that i downloaded were on the same page that I got this one. Are there bad files here? Is there a missing file in the disc?
View 4 Replies
View Related
Sep 18, 2010
I want to install Debian 5.06 64 bit on squeeze repo. Where can I find its netinstall ISO?
View 6 Replies
View Related
Mar 26, 2011
i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.
ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 2.6.35.11-83
1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?
2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.
3. is kpackagekit the fedora gui package manager ? i dont see any others.
4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.
View 4 Replies
View Related
Aug 2, 2010
I'm trying to grab "repo" using curl and put it into /usr/local/bin/ but I can't seem to figure out why I'm getting a permission error:
Code:
$ sudo curl https://android.git.kernel.org/repo > /usr/local/bin/repo
bash: /usr/local/bin/repo: Permission denied
[code]....
View 1 Replies
View Related
Jan 12, 2010
I have a local git repository that pushes to a remote repository. That remote repository moved to a new server. How do I make "git push" and "git pull" push/pull to/from the new repo?
View 3 Replies
View Related
Apr 9, 2010
i just installed centos 5.4 and trying to make my local repo have groups listing of packages like the mirrors do
so i can make an spin off of the OS to my needs for web servers only / so on but
i cant get my head around the groups making part of the creatrepo
does anyone have any tips or hints or know how to make group listing of the packages
i copyed the DVD to hard drive and the repo .XML files they came with it and tryed that way but no luck yet
im running out of things to try
View 5 Replies
View Related
May 24, 2010
I heard the laptop_mode can ruin the HD..If I enable it by doing
Code:
# echo 1 > /proc/sys/vm/laptop_mode
how much it could be dangerous for my HD?
[code]...
View 1 Replies
View Related
May 13, 2009
We are looking at setting up an SVN or CVS repo
We were also asked to research which is the best and easiest to work with/ setup. So I came here instead of google as no doubt many have used both and have their views of whats what.
View 2 Replies
View Related
Aug 16, 2010
I'm in the process of creating local repos for our company servers (CentOS 5.5) and laptops (Fedora 13). And while the CentOS part went perfect the Fedora part is causing major trouble.
But first things first, here's the setup: a central CentOS 5.5 server is running Apache2 and has a VirtualHost listening on Port 8080 for both CentOS and Fedora. The DocumentRoot for this VirtualHost is /data/repo wherein two directories, centos and fedora, reside.
This is the .repo-file for CentOS that works like a charm:
Quote:
[local]
name=CentOS-$releasever - local packages for $basearch
baseurl=url
enabled=1
After the CentOS repository was up and running I follwed the exact same steps and was expecting to find a Fedora repo up and running (I know, I know, silly me...). However, yum complains it cannot download the repomd.xml. The .repo-File is as follows:
Quote:
[local]
name=Fedora $releasever - $basearch
baseurl=http://icld:8080/fedora/$releasever/local/$basearch
enabled=1
gpgcheck=0
protect=1
Yum returns the following error message:
Error: Cannot retrieve repository metadata (repomd.xml) for repository: local. Please verify its path and try again
The path is definitely correct - copying the url and pasting it into a webbrowser returns the correct repomd.xml file, so does pasting it to wget.
Any ideas? Does createrepo need any parameters in order to create a working Fedora repository?
View 3 Replies
View Related
Nov 28, 2010
in home I do not have internet connection, but in work I have internet connection, in home I install Fedora 14 for my 6 years old daughter and she use it for play games like supertux and openarena and .So I want install opensuse for my daughter and I want test it. for fedora , I download all packages with rsync in work and move them to home by USN flash and then I make localrepo in home and install all packages , I need , I want do this for OpenSUSE , all of us know DVD , does not has all packages , I need , so I have to download all packages and make localrepo in home and install all packages , I need , Can I do this for OpenSuse or not ,I want download all packages need by OpenSuse by rsysc and make loacl repo, How I can do this for Opensuse ?
View 9 Replies
View Related
May 9, 2010
leaving the discussion is this logical or not. If I download the whole www folder to my hdd for example: from [URL] to /mnt/repos/oss/ and replace in package manager source [URL] with local one file://mnt/repos/oss will this work as it works from http server? What i want to do is to backup chosen repos before my linux release will be not supported anymore.
View 9 Replies
View Related
Jun 17, 2010
I dont have a internet connection and I want to install VLC. I want to create a local repo for a vlc by downloading all the required packages. I tried to do by downloading all the packages from from VLC repo and create a local repo but failed. Its say this dependency failed and that dependency failed. i tried to manually install each and every dependency but still the problem exists.
View 2 Replies
View Related
Jan 30, 2010
I am thinking about setting up a local Debian Repository mirror. I want it to mirror just the Debian Repo at [URL].. Anyone have any idea how much disk space I might need to do it?
View 3 Replies
View Related
Aug 16, 2010
I'm in the process of creating local repos for our company servers (CentOS 5.5) and laptops (Fedora 13). And while the CentOS part went perfect the Fedora part is causing major trouble.But first things first, here's the setup: a central CentOS 5.5 server is running Apache2 and has a VirtualHost listening on Port 8080 for both CentOS and Fedora. The DocumentRoot for this VirtualHost is /data/repo wherein two directories, centos and fedora, reside.
This is the .repo-file for CentOS that works like a charm:
Quote:[local]
name=CentOS-$releasever - local packages for $basearch
[code]...
View 5 Replies
View Related
Sep 3, 2011
I am trying to install Python module on my machine. While installing, there is an error on terminal.It was OK until this step:
Writing
/usr/local/lib/python3.2/dist-packages/athletelist-1.0.0.egg-info
Then it shows an error:
error: /usr/local/lib/python3.2/dist-packages/athletelist-1.0.0.egg-info: Permission denied
m?PS. I use Ubuntu 11.04 and I am quiet new on Linux World.
View 1 Replies
View Related