OpenSUSE Install :: Black Screen After Boot Menu?
Apr 2, 2010
i've just tried to install openSUSE on to a spare hdd, i've also got windows 7 on another. After installing everything and the computer went to reboot the screen just went black and didn't restart. After restarting it myself, i turned the computer on and got to a menu that says:
openSUSE
failsafe
windows
When i tried to go to openSUSE it seemed to work and a long list of text came up but after a few seconds it went to a blank screen. The same thing happens when i go to failsafe. so i'm not really sure what to do, i would have tried a few things i've found from searching but can't get to the command prompt on failesafe.
I've got an ati readon hd 4750 video card.
View 9 Replies
ADVERTISEMENT
Jul 17, 2010
After a fresh install of opensuse 11.3 and a xen-hypervisor and tools (all default install, nothing special) just get a black screen when I try to use kernel-xen. Default kernel runs like a charm. Xen-kernel gives me a black screen just after grub menu.
This is my menu.lst about it:
###Don't change this comment - YaST2 identifier: Original name: xen###
title Xen -- openSUSE 11.3 - 2.6.34-12
root (hd0,2)
[code]...
I have no nvidia card...
View 8 Replies
View Related
Jun 2, 2011
I very frustrated at this point. I have tried to boot OpenSUSE 11.4 from the usb flash drive iso and CD iso. After I restart my computer the boot menu comes up and I click the boot option and the screens loads a bit and then goes black. I have also tried the text installer, but that doesn't work either. I know the problem must be my graphics chip. I have a integrated Intel HD Graphics chip. My laptop is a Gateway NV79. How can I get the graphics to work?
I've tried everything I can think off. I'm not the most computer savvy so if someone replies I would appreciate a dumb-down explanation on what to do with clear steps, if possible. Note: I'm dual booting with windows 7. The graphics problem is not just OpenSUSE. I tried Ubuntu 11.04, Kubuntu 11.04, Fedora 15 and they all have the same problems. In Fedora 15, I was able to boot in but I got an error message that said Gnome 3 fallback and I couldn't get the graphics to change to standard mode
View 5 Replies
View Related
Dec 12, 2009
I recently installed 11.1 via unetbootin from the network onto an old Sony VAIO laptop. After the installation completed, I suppose the OS started to boot, but I was presented with a black screen. I heard "chimes." The black screen does not provide any visible feedback from mouse or keyboard input. I hard rebooted and was presented with an interesting background graphic (grayish, I think) that faded to the same black screen.
View 9 Replies
View Related
Dec 26, 2009
A few days ago I updated my openSUSE installation on my Acer Aspire 5920G notebook from 11.1 to 11.2, but I haven't been able to get any kind of graphical shell loaded. Using the regular "desktop" option in GRUB results in a black screen. seems my PC is still responsive though as hitting Ctrl+Alt+Del like a mad man results in the PC getting rebooted after a while. I had the same "black screen" issue with the KDElive CD and the regular installation CD (Yeah, I should have known better than to do the upgrade...).
When opting for "Failsafe" in GRUB, I reach a command line. Before that it seems to try to load GNOME (you get to see the cursor) but fails at it a few times in a row. When I try to start GDM afterwards from the command line, it gets into a loop in which it tries to load, then crashes and then tries to load again, endlessly.I have installed the newest NVIDIA drivers "the hard way", and my card (NVIDIA 8600M GT) is on the list of supported devices on the NVIDIA website. SaX2 seems to work OK with it.
View 9 Replies
View Related
Jan 6, 2010
I have been trying to fix this for some time, on and off, and have been unable to, I have also ben unable to find a solution in the forums.I have installed openSUSE11.2 GNOME on a laptop, the install went fine, and it runs great, except for two problems:When I start up the splash screen doesn't show (this isn't really important, and I am happy to watch as everything is loaded)When I shutdown/reboot the computer freezes and I have to use the power button to switch off.This doesn't happen every time I shutdown, but most of the time.The freeze happens at different points of shutdown, so I don't know where to find what is causing the problem.As I mentioned point 1 is not really important, although I would like to know why this is happening, but problem 2 is very important.
View 9 Replies
View Related
Aug 2, 2010
I've down loaded the live CD for SUSE 11.3 and, using isohybrid and dd, I put the contents onto a USB stick and made it bootable. All good so far.
I then installed SUSE on one of the partitions on my hard disk (Windows is also on the disk). I set 4GB for SWAP, 16 GB for ROOT and the rest ~270 for /HOME.
I set the bootloader to be installed in the MBR.
The installation completed with no problems indicated.
I was asked to reboot and did so, removing the usb stick so that 11.3 would boot.
The reboot failed! I was presented with a black screen and nothing else happened.
I tried again, selecting openSUSE 11.3 from the boot menu. - Again a black screen shortly after pressing enter.
I can boot in Failsafe mode and then login with text prompt. I can't boot into runlevel 3 (same problem - black screen)
Does anyone know whether this is a problem with network configuration or graphics?
I have a notebook with ATI Radeon Mobility HD 5650 graphics card and
ATHEROS ar8132 ethernet controller.
View 1 Replies
View Related
Nov 17, 2010
I have windows 7 and I'd like to install opensuse 11.3. I have tried with liveCD, live usb, live dvd, but when I click installation, it shows "kernel loading", and when it finishes the loading, all I get is a black screen. Sometimes, when I try with the live CD method it reboots and the same happens again.
In my other computer with XP installed inside, it works immediately. I have tried to change video mode to text and vesa mode, also I have typed "acpi=off noapic edd=off" in the boot options line, but it didn't worked.
The black screen appears not only for the installation option, but also when I choose boot live CD, and check installation media. By the way, I have checked the downloaded iso with md5 checker, and it's the right file.
View 9 Replies
View Related
Apr 14, 2011
I could upgrade openSUSE 11.4 on my desktop but when trying to do the same procedure on my girlfriend's laptop, after the zypper update part (and the reboot asked), now we can get it to boot.
After selecting suse from GRUB it shows some code (too fast to be read) then black screen forever. I erased the VGA option before booting and now it gets stuck in
Code:
[0.490266][<c02037a6>] kernel_thread_helper+0x6/0x10
We don't have any idea of what to do ;__;
View 5 Replies
View Related
May 14, 2011
Here's the problem: My ubuntu goes into a black screen with "_" flashing after selecting the kernel in grub menu. Everything has been working just fine since I installed it (about a month ago, when 11.04 came out). The problem must have something to do with grub not finding the correct partition or something like that. I was messing around with pysdm, trying to make it auto-mount one of my partitions, so that's the likely cause of my problem. However, I did not edit anything on the ubuntu partition, only the partition where my files are located. Is there any way to tell grub which partition to load upon booting up?
View 9 Replies
View Related
Sep 1, 2010
I recently upgraded from openSUSE 11.2/Gnome to openSUSE 11.3/Gnome
The instructions are followed is as below:-
How To Upgrade OpenSUSE 11.2 To 11.3 (Desktop & Server) | HowtoForge - Linux Howtos and Tutorials
I still see 11.2,11.2 safe mode start up menus on boot, i would like to remove these menus.
Would removing these menus affect stability
Also how do diagnose any left over trash ,non applicable software left over from 11.2
View 9 Replies
View Related
Jul 30, 2010
I am having trouble with the grub boot menu. I have a dual boot system, Windows XP 32 bit and Ubuntu 10.04 64 bit. Windows was preexisting when I installed Ubuntu. The install went fine but when I restarted, the Grub menu gives the option of the Windows boot loader but when I tab to that and press enter the screen goes black and the curser just blinks in the upper left corner...no XP boot. The XP drive is there as I can mount it from Ubuntu side but when I try to boot into it it does not seem to be there. What have I done and what can be done so that I can boot into the XP side?
View 7 Replies
View Related
Feb 26, 2010
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies
View Related
Nov 17, 2010
As part of the ongoing saga of the openSUSE 11.3 "Black Screen" on boot, during install, etc., I have been testing other distros on the same platform:
Code:
Intel i5-430, 4GB, and Intel GMA HD
While testing Fedora 14, I stumbled upon FedoraForum.org - View Single Post - Black
[code]...
View 9 Replies
View Related
Mar 9, 2011
I try to install openSUSE 11.4 KDE RC 2, unfortunately I show black screen after GRUB screen. I must press Power button to turn off my computer. I hope it won't on openSUSE 11.4 stable. I'm waiting for downloading openSUSE 11.4.
View 8 Replies
View Related
Aug 22, 2014
I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.
View 13 Replies
View Related
Sep 2, 2010
I've got a problem with my openSuse 11.3 for a few days. This is my first Linux so i'm kind of rookie.OK, let's start.I installed it something like 1 month ago and everything looks good until now. When I turn on my PC and try to login (deskop mode) login bar goes from 30% to 50% and then appears a black screen, nothing more, just deep black (cannot type anything etc.) I use GRUB - Windows, opensuse deskop mode and failsafe mode. Failsafe mode works good, but I have no idea what should I do because I didn't change anything. I even done a reinstall of OpenSuse and after one day I've got the same black screen.Someting wrong with grapfic card drivers? (ati 4850, downloaded from ati page, works good for 1 month) maybe some kind of new update which was installed automatically?
View 3 Replies
View Related
Dec 30, 2010
Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.
I have tried the following so far to identify the issue or isolate it:
- Switching to the console screens has no effect, still the black / blank screen.
- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available
- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver
- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.
Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?
View 9 Replies
View Related
May 14, 2015
I installed jessie amd64 lxde to a thumb drive to use with a laptop. Vanilla install using the amd64 lxde live cd. Upon booting the usb system, I am presented with a black screen with blinking cursor. No grub screen, no ability to type any commands and no ability to switch to another terminal. I tried booting into the live cd and I could get into the intro splash screen. Booting to the live system from there would also hang at a black screen.
However, using the kernel parameter "nomodeset" from the splash screen did allow the live system to boot to the desktop. I booted the live system, mounted the usb system and chrooted into it. I edited /etc/default/grub to include "nomodeset" in the GRUB_CMDLINE_LINUX_DEFAULT and GRUB_CMDLINE_LINUX variables and then ran update-grub.
Upon reboot to the usb system the problem still occurred. The video card in question is a amd firepro 5800m which has an lspci line of mobile radeon 5000 series. This card was supported in wheezy and apparently works with the live system.
View 5 Replies
View Related
Mar 25, 2010
After having a lot of trouble with vista and no chance of getting Windows 7 anytime soon, I decided to get Ubuntu and use dual booting with vista. I had recently installed it about two days ago and for the most part it worked pretty well. That is until I installed the driver for my video card, an ATI Radeon HD2600 pro, then things went down hill for me. Every time I try and boot Ubuntu it now goes to a black screen after the logo comes up and i am unable to do anything. I have tried to look up some solutions, but I am still relatively new to programing and some of this stuff seems a bit complicated for me. Is there a simple solution to this that does not require a reinstall?
View 9 Replies
View Related
Nov 8, 2010
I realize that many have had the issue of getting a black screen when booting up. I'm posting because I've tried a couple fixes that I read after doing a search and haven't had any luck yet. I have the 64-bit 10.04 installed on my netbook and my issue surfaced after installing the current nVidia accelerated graphics driver. Following the install ubuntu now boots to a black screen and nothing more. 'nomodeset' only allows me to boot ubuntu in low-graphics mode (which I'm in now) and this fix hasn't produced a solution either: [URL]..64&postcount=9 My netbook has nVidia ION2 graphics with an integrated as well as a discreet graphics card (Intel GMA3150 and NVIDIA GT21
View 9 Replies
View Related
Dec 24, 2009
I'm running openSUSE 11.2 on a Thinkpad T61p with nvidia graphics. I'm running the proprietary nvidia driver.The battery ran very low and the computer suspended itself. After I woke it up, the desktop is completely black.After troubleshooting as much as I could, I did ctrl-alt-backspace, which brought me to a normal (non-black) login screen. However, as soon as I logged in, I was back to a completely black screen. But the system is operating.I rebooted the computer (warm reboot as well as cold restart) and each time the video is normal until I get to the desktop and all I get it black.Everything was normal until the pm suspend.Suspend has never worked exactly right, so I don't normally use it. But in this case, it used itself Next step: I logged in to console mode and looked at the logs. The only messages of interest seem to be in Xorg.0.log I found a couple error messages that might be of interest:
(II) LoadModule: "nouveau"
(WW) Warning, couldn't open module nouveau
(II) UnloadModule: "nouveau"
[code]....
View 9 Replies
View Related
Feb 18, 2010
I'm on a JFK assassination binge right now
Every ten minutes or so the screen goes blank and I have to hit the keyboard or wiggle the mouse to bring it back to life
This isn't hibernation...for the audio still works
I've looked around the control center...right clicked the desktop and looked at options there
View 5 Replies
View Related
Mar 2, 2010
I have been using OpenSuse at work for years. My Windows 7 machine crashed on me. Instead of spending the time to fix it, I decided to take the plunge and install 11.2 on my home system. I have 4 one TB drives. My RAID card has a 2x2 1/0 RAID array defined (sdb, sdc, sdc, and sde). A fifth hard drive, outside of the arrary, which is a 250GB drive (sda). It is a software RAID. Here are the partitions I set up in the installer.
On the raid:
1.75 TB on /home
2.01 GB on swap
48.55 GB on /tmp
Off of the raid:
sda1 115 GB /
sda2115 GB /boot
(I know these are really big but I did not want to put any data outside of the RAID) In the final Installation Settings screen, I chose Booting and change from booting from the MBR to the /boot partition. The boot loader type is Grub and the status location is at /dev/sda2. I select Install and it installs without any error message.
After it installs, it restarts and I press ESC to see what is happening. It skips boot.cycle and continues to load to "starting HAL daemon ...done" and then the cursed black screen. I cannot SSH into it. It just sits there and I have to do a hard resest. Once I restart it, it boots into the non-RAD drive I get the follwing error message:
GRUB ..(it went to fast for me to get the rest of it)(hd1/1) message: file not found and I get the option the change the boot options of the Desktop -- openSUSE 11.2 and Failsage -- openSUSE 11.2 . I select e to edit the boot section of desktop and see
root (hd1,1)
kernal /vmlinz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-ST32508...
intrd /initrd-2.6.31.5-0.1-desktop.
I tried changing the root (hd1,1) to 0,1 1,0 2,0, etc with no luck.What do I do? I need to boot into OpenSUSE and finish the cursed installation.
PS: You can tell I work IT with the uber amount of details I put into this
View 6 Replies
View Related
Apr 7, 2010
I have registered a problem similar to the one reported in this thread: Solution to black screen problem in opensuse11.2 - openSUSE Forums
after installing openSUSE 11.2 from DVD, and rebooting the system a blank screen appears after booting process is completed.
Initially, I was thinking that was 'cause of the installation of ndiswrapper drivers (see command "modprobe ndiswrapper" not working - openSUSE Forums) but after the 4th (!) installation of openSUSE I really don't know what to think...
Sometimes openSuse boots regularly, and sometimes not... seems that there is no difference if I restart the PC or I turn it off and then off. Result is the same: sometimes I get the user desktop and sometimes not...
As explained in my previous post, I have checked the disk but all seems ok.
Now I cannot use the PC even in failsafe mode... I get always a black screen.
But what is more surprising is that I have 2 identical (identical!) PC with the identical hardware, and identical bios configuration. Only the monitor is different. Well, said that, one is working the the other one not...
To be honest, the working PC was an openSUSE 11.1 systems updated to openSUSE 11.2.
I think that must be something wrong on the distributed openSUSE DVD..
View 9 Replies
View Related
Oct 5, 2010
I tried both installing 11.3 on top of 11.2 and a new install with the same result on a couple of different mac pros (with 2009 ATI Radeon HD 4870 with 512MB of GDDR5 memory, 2.66 GHz 2x4 core Xeon 3500, 24 GB of memory). The install was done via the downloadable dvd from opensuse.org. The graphics of the install process looked fine as well as the configuration. When it came time to boot, however, the suse splash screen showed up and then the monitor went dark. The graphics seems to be frotzed. Now attempting to boot from the DVD does not cause the display to do anything. Even putting a mac DVD restore disk (and using C during boot) does not result in anything on the display). Any ideas of what the installation could have done -- seems like a no-brainer that something is screwed up with the graphics card, but I have no real proof and even less idea of what to try next.
View 2 Replies
View Related
Aug 29, 2014
I appear to have the exact problem that is currently listed in the 7.6 errata about EFI boot and black screen while trying to install ("Potential issues with UEFI booting on amd64"). The problem is that their workaround is not an option for me. This is a new rig and the motherboard doesn't appear to have any kind of ability to disable secure boot. I also don't know if my problem is exactly what they're thinking when it comes to that entry.
I'm able to get to the Grub install screen where you have the option to install Debian but when I select an option (any option) the screen turns off, back on but is black. All activity in the system stops after a few seconds (3-5 seconds) and that's it, she's done. I've tried all the options to try and disable secure boot but the options listed below are as close as I can get (and apparently should be sufficient).
The CD ISO used was the 7.6 netinst CD. I've also tried the Jessie ISO (Testing) that was downloaded about 2 hours ago. Same results. Unlike the errata which says "intermittent booting problems", my issue is consistently reproduced with no other result no matter what I do.
The rig:
-Asus H97-Plus running revision 2202
-Intel i5-4570
-32GB DDR3-1600
-128GB SSD Drive
-No external video card - using on board only but have tried both VGA and HDMI ports with the same result.
BIOS settings (is it still called BIOS or is it UEFI now?)
-Fast Boot: Disabled
-Launch CSM: Enabled
-Boot Device Control: "Legacy OPROM Only" or "UEFI and Legacy OPROM" (tried both)
-Secure Boot State: Enabled (it's grayed out and I'm unable to change this)
-OS Type: Other OS (supposedly makes it so you can boot non-Windows OS)
The Debian page with the errata: [URL] ...
Look for "Potential issues with UEFI booting on amd64"
The obvious suggestions I've tried:
-tried USB boot & CD boot - same result
-tried altering the grub script to add the ACPI options - no effect
View 1 Replies
View Related
Jan 1, 2010
Im newer in ubuntu i try to install ubuntu 9.10 in my Laptop HP DV5 Core2Duo 4Go Ram rin Windows 7 32bits and in Disc C: already windows 7 install on then i want install the both in th same HDD, like the same operation i make it in my Desktop Dell and it work perfectly, but now i have a error message please see Screenshot and I try to boot from CD and install Ubunto also i have screen black with 1000 ligne error
View 7 Replies
View Related
Dec 8, 2010
I turned on my Acer laptop and during bootup it seemed normal. After it passed the blue Acer logo, all I could see is a black screen and a black cursor outlined in white in the shape of an X. Thinking it would be a one time thing, I turned it off again.it still was a black screen.
View 14 Replies
View Related
Apr 2, 2011
I get a black screen when I install the driver, plus:
Code:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
is there a method to install the drivers on openSUSE 11.4?
View 7 Replies
View Related
