OpenSUSE Install :: Don't Have To Completely Reinstall And Set Up All Packages And Stuff Again?
Sep 3, 2010
I've installed open suse with no problems however I accidentally put my root folder on an external HD. I want to have my root on a partition of my main drive so I can continue to dual boot windows. Is there a way to move root so I don't have to completely reinstall and set up all my packages and stuff again.I assume to do this I need to use the installation disk again and fix it before boot up but should I partition my main drive first. I'm being intentionally cautious as there is data I'd rather not lose on there.
View 9 Replies
ADVERTISEMENT
Mar 11, 2010
Due to lack of concentration, I inadvertantly ran PClinux(2009-2)'s "install.sh" while I was in openSuse 11.1. This file says:
grub --device-map=/boot/grub/device.map --batch <<EOF
root (hd0,6)
setup --stage2=/boot/grub/stage2 (hd0,6)
quit
EOF
I soon found out that Suse 11.1 would no longer boot from boot.ini (using bootpart) because the boot process now brings up PCLOS (in /dev/sda6) rather than Suse 11.1 sitting in /dev/sda5. No problem, I thought, I'll boot from the Suse install DVD, use repair, and away I go. Wrong. After grinding, it started mentioning about generating something for sda13, which is my last partition. NTFS! So I bailed before it got too far. I even tried "rescue" option on the DVD, command prompt, and grub commands to reinstall via "setup.
Then I tried to use Super Grub Disk (.97xx) to reinstall the PBR, stage 1 and stage 2 loaders. Didn't change a thing. So then I used Grub4DOS and got into my Suse 11.1 installation using this in its menu.lst:
title openSUSE 11.1 - 2.6.27.45-0.1
[Code]...
Worked fine, and is now my (only) method of booting to 11.1. So obviously it's bypassing stage 1 and 2 files, using it's native Grub4DOS code. But then I tried Yast-Bootloader to reinstall Grub's files. No difference. Then I used the advanced part to "write bootloader code to disk" No difference. Even tried "propose a new boot scheme" (or whatnot) no difference. After looking at all this, I've come to the conclusion that the PBR code in sda5 is scraunched, and/or stage 1 code (although it's still the original date), or stage 2 (which definitely had a new timestamp of when I committed the fatal error by executing PCLOS's "install.sh".
So my question is this: How do I do a good COMPLETE re-install of Suse's version of the grub files? Because, for sure, grub commands like "setup --stage2=/boot/grub/stage2 (hd0,5), and variations thereof, certainly aren't doing it? My reasoning is that I should make sure that all the boot files get restored/confirmed as "originally installed by Suse".
View 9 Replies
View Related
Aug 29, 2010
I would like to completely erase my hard drive and install Ubuntu 10.04 on again fresh. I think some files have become corrupted from a power cut that I had last night whilst the laptop was plugged in (and turned on).
I'm not bothered about completely wiping the hard drive since there are no important files on it (at most there are just a lot of packages I downloaded from the repro...) I don't have any Windows installations either - it's just a simple; wipe the hard drive and reinstall all over again case
View 2 Replies
View Related
Sep 12, 2010
I'm running 11.3, 64bit.It downloads everything fine, but not long after it starts installing things, my PC completely freezes. I tried giving it 20 minutes, but it didn't seem to want to come back to me.What does this mean? Is my OpenSUSE broken?
View 3 Replies
View Related
Apr 29, 2010
I recently installed opensuse 11.2 on my laptop which also had windows vista and windows 7, i created a new partition and the installation went smoothly, after i went to boot back into windows 7 i got a blue screen of death, strangely vista boots perfectly.I could just reinstall windows 7 but its a pain to reinstall all my programs and such
View 6 Replies
View Related
Aug 31, 2009
I was having a problem where I had run keytool to generate a key but had entered some bad info. I tried to run it again but it said there was already a key, so I deleted keystore thinking it would regenerate itself. I ran the keytool command again but it says it can't derive the signature algorithm.
Anyway, I've tried to 'sudo apt-get remove sun-java6-jdk' then 'sudo apt-get install sun-java6-jdk' but it doesn't seem to put me back where I was from step 1. 'sudo dpkg-reconfigure' also doesn't seem to fix it. I think if I can completely reinstall jdk then I'll be good, but how?
I just uninstalled, did 'sudo apt-get clean sun-java6-jdk' then installed again. Still get the error:
keytool error: java.lang.Excpetion: Cannot derive signature algorithm
View 3 Replies
View Related
Aug 15, 2010
So in essence, my drive has become a cluster of random partitions, multiple Ubuntu installs, and random windows systems. It's gotten so bad that on my entire 250gb system my main Ubuntu install only gets 40gb of memory. Could anybody give me a step by step guide to do the following:
1. Completely wipe and departition my disc.
2. Install Ubuntu from a backup .tar file
3. Install a 40gb windows 7 partition
View 2 Replies
View Related
Jan 30, 2011
After two years worth of trying to get HDMI audio working on, what should be, a MythTV box I am now fed up to the teeth with it. Utterly, completely sick and dissilusioned with Ubuntu & HDMI. Firstly there is no problem with the hardware as I managed to get HDMI audio working using the original install of 9.04. However the sata DVD drive didn't work. So I waited until 10.04 and upgraded after which the DVD drive worked but HDMI audio didn't. So after a couple of months worth of trying everything I could find in forums etc. I gave up and waited for 10.10.
Months later and after installing 10.10 not only does HDMI audio not work but the soundcard details shown in "gnome-volume-control" now only lists a single analogue device whereas running from a 10.10 live CD I get a comprehensive list of available devices including entries SPDIF and HDMI. It's therefore obvious that something I've done in the huge list of things that I've changed has screwed up the audio configuration. And despite having reams of notes I'm in no position to find out exactly what as a) I'm not an expert in Linux audio (nor do I want to be) and b) there have simply been too many changes for me to keep track of.
how can I completely remove *ALL* traces of the current audio system and reinstall *EVERYTHING* related to audio using the latest versions ? I want to completely obliterate the current audio installation (including all configuration files, kernel headers, drivers, alsa, the wretched pulse audio etc. etc.) and start from scratch. I have already been through every sinlge HDMI related forum post and have tried everything so please don't suggest "make sure HDMI audio is unmuted in alsa-mixer" etc. as I've been there, tried that and am bored with it all. I want to completely nuke the audio system from orbit and start again. At this point I should say that I've already tried the following which didn't make any difference:
sudo rm /etc/asound.conf
rm ~/.*
sudo apt-get --purge remove linux-sound-base alsa-base alsa-utils
sudo apt-get install linux-sound-base alsa-base alsa-utils
And to prove that the device is there here's the output from "aplay":
aplay -l
**** List of PLAYBACK Hardware Devices ****
I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
I: caps.c: Dropping root privileges.
[code]....
Or should I just give up and install Windows media centre ? Having preformed a trial installation of Windows on a seperate disc everything "just works" with perfect HDMI audio, perfect picture, DVB card working perfectly, DVDs Playing etc. etc.
View 2 Replies
View Related
Aug 13, 2010
I would like to know exactly how to download files and applications from Firefox.
View 3 Replies
View Related
Aug 9, 2010
My filesystem (software RAID 0):
Filesystem...... Size....... Used....... Avail....... Use%....... Mounted on
/dev/md1........ 9.7G....... 2.8G....... 6.5G....... 31%....... /
[code]....
View 2 Replies
View Related
Nov 15, 2010
I just install Ubuntu on a new computer I got, and set up LAMP. I started poking around in MySQL (more than I should have) and managed to break it. I've been trying to fix it, but I can't. I've done apt-get --purge mysql-client, but when I reinstall it it's the same thing. How can I reinstall MySQL (and PHPmyadmin) from a completely clean slate? (There's no important data on there)
View 1 Replies
View Related
Apr 12, 2011
I use slackware 13.1-current on desktop with 4gb ram, nvidia geforce 210, and AMD cpu.
I have problem with my X starting using 40-50 MB of RAM and after some hours suddenly rises up to 400-500 MB. I have tried KDE ( with and without desktop effects ), LXDE, 3 different nvidia drivers ( the one made from the slackbuilds ) but no luck.
I decided at last to use the default slackware's driver. I uninstalled the nvidia driver and do startx, but it says code...
I have no idea about GPU and drivers, it was a mistake to install a driver for my nvidia just to have desktop effects. I just want to bring the things back as at the beginning of the systems installation and the default drivers.
Do you have any idea how to do it?
View 8 Replies
View Related
Feb 1, 2011
I tried to add a stanza to /etc/rc.d/boot.local but it did not get executed following the next reboot. I then tried to find documentation on the structure of opensuse boot scripts, but failed.
the boot scripts in opensuse are sufficiently different from: fedora, ubuntu, redhat, debian, (pretty much all other linuces) that one needs a tutorial or documentation to learn howto add scripting to local like one adds stuff to rc.local elsewhere.
View 5 Replies
View Related
May 25, 2010
i installed the new ubuntu on my system as a side by side installation, i've been using it for about 2 weeks now. ported over or found linux equivalents of any applications and games i use onto my ubuntu partition, and now i've decided i want to have ubuntu use the entire drive and just delete windows! The problem is, i'm not sure if i can do that I shrank my windows partition half a gig and booted lupu (the ubuntu partitioner wasn't even showing this half a gig of free space) to see if i could just extend my linux partition (in the case that this did work, i was just planning on deleting my windows partition and just extending my linux to the full size of my drive). I really want to avoid a full reformat of the drive because i have customized my ubuntu a decent bit and i don't want to have to redo all of that (not to mention the data, but i could always back that up on an external hdd). Here is a screenie of gparted: i don't really know too much about partitioning. so is there any way to remove windows and give linux the rest of the drive without having to completely reinstall ubuntu?
View 8 Replies
View Related
Aug 31, 2011
I just upgraded from 11.2 to 11.4 and the installation/upgrade worked just perfect. I than followed the instructions in the "New User How To/FAQ", "Multimedia and restricted format" post. I was following the instruction in the 11.4 section. I added the additional repositories as explained. I then was on the section where it talks about going into software management and selecting the "Packman" repository and clicking to "switch systems packages" to the versions in this repository (packman). I than click this link and the "warning" screen appears and I am present with conflict resolution after conflict resolution dialog. It just seems that there are some many conflicts, it just seems wrong and I canceled.
The installation/upgrade appears to have worked just fine. My mail is there, audio and dvd play back worked the first try after the upgrade. I am not clear if this is what I should expect or their is something wrong or if I even need to complete this step for a successfully installation.
View 3 Replies
View Related
Mar 30, 2010
My openSUSE 11.2 64 bit's not off it completely, after I had an update online. Do not ask me what I updated, was much ... In the process of shutting down, I hit "ESC" to display the text, and photographed the screen where it to.
View 4 Replies
View Related
Dec 6, 2010
sometimes 11.3 KDE shutdowned because of some applications or some other packages installing and then why it happened frequently than Widnows and no one posting warning package or applications in the main page, but newbies should know which program not installed, it seems like everything is great when installed openSUSE, it has many problems i don't know it is because of its distributor or other program vendors
today i installed Virtualbox and skype and then system shutdowned. I don't know which one is having the problems but now i removed both and nothing bad happened so now
View 9 Replies
View Related
Mar 30, 2011
I am trying to streamline a desktop install into a more streamlined server-esk install. I have edited the inittab to change the runlevel at startup to 3. How do I now remove KDE completely? Also are there any other large programs I need to uninstall?
View 3 Replies
View Related
Aug 11, 2010
This is an install of openSUSE-11.2 32bit. Obvoiusly, during the fresh install something went wrong. The HDD has 4 primary partitions, meant for /boot / swap /home (in that order). Instead of /home partition /dev/sda4 is mounted on /usr.
Currently it looks like this:
Code:
# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000cbdf6
[Code]...
View 5 Replies
View Related
Sep 13, 2011
Opensuse Linux (Linux sr-server 2.6.37.6-0.7-default #1 SMP 2011-07-21 02:17:24 +0200 i686 athlon i386 GNU/Linux). I have a very unusual problem where fdisk reports one size BUT df reports a TOTALLY different and unexpected size. Besides doing a full backup, repartition, reformat and restore, is there anything else I can try first??
Here are the outputs: (sda1 and sda2 sizes are completely different from fdisk!!)
df -v -h
Filesystem Size Used Avail Use% Mounted on
rootfs 22G 17G 4.2G 81% /
devtmpfs 369M 152K 368M 1% /dev
tmpfs 375M 648K 374M 1% /dev/shm
/dev/sda2 22G 17G 4.2G 81% /
/dev/sda1 15G 7.8G 6.6G 54% /windows/C
FDISK reports correctly (sda1, sda2, sda3 = 24Gb, 949Gb, 3.1gb) .....
View 1 Replies
View Related
Aug 26, 2010
Sometimes, (the most when I'm making changes in something, like the pager, appearance, theme, etc), the screen freezes completely (but mouse is moving) and I have to restart the system.
If I try it again, it crashes at the same point.
View 4 Replies
View Related
Nov 29, 2010
I was using open suse with win 7 in a PC with dual boot (grub). But my Hard Drive has 170GB of free space (do not ask why I left this empty space ). Onde day I needed to use this free space and formated it using the windows. It worked fine, but when I reestarted the notebook my grub did not opened! To solve the problems I tried to recovered it but with no success, so I found a tutorial to reinstall the grub, It worked partially, because my open suse partition was not detected and I can't access it.
View 6 Replies
View Related
May 1, 2011
I need to reinstall the 11.4 bootloader (but to the root partition instead of the MBR). There used to be an automated repair GUI on the 11.1 DVD, but it seems to be gone from the 11.4 distro. Is it someplace special I can find it? Can I use my 11.1 DVD to just (easily) reinstall the bootloader? I am *not* a command-line person!!
View 4 Replies
View Related
Nov 16, 2009
Running F11 x86_64 on recently rebuilt desktop with new processor/motherboard
I tried to build mplayer from source, and something got messed up. When I realized I had done something wrong, I did a "make remove", and then tried to reinstall mplayer from rpmfusion using yum.
(There is a bug in mencoder that was fixed in the latest source tree - a documented bug that has to do with subtitles. I don't think I can patch a library with a diff line of code, so thought the best answer to get the update would be to install mplayer by source. I love using Fedora, and would like to make that next step in learning linux by building a few custom packages. Apparently, I don't have all the skills yet!)
That being said, my system is still not quite right. I figure the easy answer is to wait until tomorrow, upgrade to F12, and all should be well. But... I will probably compile something else and mess something else up - that's just how I roll...
I can get a list (sort of) of install packages with "yum list installed". Is there a way to strip off all of the extra information, then pipe this to yum reinstall? I may resort to doing this by hand, but there has to be an easier way!
View 5 Replies
View Related
Feb 27, 2011
I have my brand new Dell latitude e6410 delivered with Windows 7 already installed. I want a dual boot and I decided to try SUSE for the first time. I used the installation DVD, the installation seemed to end up well. The problem is that already at the first reboot, the screen went completely black. By pressing ctrl-alt-del I can reboot the laptop. It seems to me a problem with the graphic card.
My setup is:
Dell Latitude e6410
Intel i5 m560 @2.67 GHz
nVidia NVS 3100M
4Gb DDR ram
Intel 82577LM Gigabit Network connector
If I start in failsafe mode, the X server starts, I have KDE, although with a somewhat sketchy graphic, I can use SUSE almost normally. The main problem in this case being that the system doesn't find any ethernet/wi-fi device, so I cannot connect to the Internet (I'm writing from Win7 right now). I tried choosing the default SUSE boot with the additional boot option "nomodeset" at the grub prompt. This is a suggestion mentioned in another post on this forum, although in that case the problem was coming from a bug dealing with an Intel graphic card. The system goes up but then kde doesn't start. I'm asked to lgin at a prompt. If I try to launch kde from command line (startkde), it complains that the variable $DISPLAY is not setup.
This is where I am now. I'm quite out of ideas, so I want to ask you few things. First stupid question: is the problem coming likely from the drivers of the nvidia graphic card? Second question: in that case, how can I fix it, considering that the linux partition is "isolated"? The fact that in failsafe SUSE doesn't see any network adapter concerns me a bit.
View 8 Replies
View Related
May 4, 2010
After have the gui completly f***d up with an upgrade that messed up kde, I'm about to restore the original kde from the installation dvd (11.1) but there is no particular options to only restore kde, so I have concerns concerning some of those applications compiled and installed after the original installation (two years backward). I also updated the kernel to make things work with vmware...I don't want to loose time to recompile all the different stuff I need to work with linux.
Is there a way to be sure (by renaming /usr /bin /sbin for example) to keep the kernel alive (with libraries and headers) and all applications that were working very good before I did this update for kde (I won't do this again trust me)?The kde group never told me how restore kde from the original dvd so I'm a little disappointed because the system is working ok in run level 3.only kde is dead.I'll dig deeper before doing the reinstallation of suse 11.1...
View 9 Replies
View Related
Aug 2, 2010
On my Desktop I am experiencing a very weird behavior. First of all, I would like to mention that I am posting from the very same machine...just under Windows (which tends me to roll our hardware issues).
Next, a short history I installed 11.2 on my machine when it came out last year. I upgraded my hardware (new mainboard, cpu, ...) without reinstalling. Everything went fine I upgraded to KDE 4.4...still everything ok I did a system upgrade to 11.3 final using zypper And there it starts. After the upgrade, the first boot didnt work as expected (the system just hang). So I just did a restart and 11.3 was up and running. Now, since last week, I cannot boot my system at all. The screen just shows me the boot-splash but the progress bar isnt moving a thing. So I started with the option splash=verbose which did not show me a single line of output. The system just hangs right after the GRUB selection occured. So I decided to download 11.3, burn it to a disc and reinstall it. Well...this doesnt work either At least it shows me some lines of output, which look fine, but some lines after starting KDM the screen goes black and thats it. The only way I got something was when I started the installation in Textmode. I was able to log in but I dont know what to do then. I ran yast2 but it didnt look like I could install the system that way.It would be nice to get it running with my home-partition still in place.
View 6 Replies
View Related
Sep 19, 2010
After working with a more or less stable system I decided to install 11.3 on my system. Atm I am working with a updated 10.3 (prop state is 11.2 now after kernel update) Installed is Gnome, KDE3 and KDE4 - using KDE3
Now the question can I reinstall Opensuse 11.3 to my root partition and keep /home successfully? It is on a separate partition (Doing backup atm also). I understand that I will have to set it as mountpoint during installation. When asked to create user I stopped as I am scared if I add a user with the same name as on my old install it will overwrite the current folder in mounted /home... I seriously like my old username and want to keep it - can i safely add the user during install? will my stuff be still there?
View 6 Replies
View Related
Jan 13, 2010
In my company's production server, there are already mysql, php and httpd packages installed and running. Configurations are already made to the httpd.conf and my.cnf files.
Now I have to upgrade the packages to the latest version. I have to perform a yum update for the whole system first, then reinstall the packages right?
Will this affect the changes made to the configuration files? If yes, how do I upgrade so that the changes are not affected?
View 2 Replies
View Related
May 19, 2010
Deleted my ati drivers accidently during a botched upgrade. Have been trying to fix the problem from things I read on here, made a thread but can't get online to execute it.Found my install dvd tried running repair and in the process deleted my windows partition(anyway to get that back?) and still no previous ati drivers or gnome installed.
When I boot up i see SUSE LINUX not opensuse... no grub So my question is how do I install ati drivers from the dvd and how do I install gnome or kde from install dvd? did i royally mess up and basically now just completely reinstall opensuse 11.2 completely? and if so can I recover files from my deleted windows partition and previous opensuse partition?
View 5 Replies
View Related
