OpenSUSE Install :: How To Reinstall Grub
Nov 29, 2010
I was using open suse with win 7 in a PC with dual boot (grub). But my Hard Drive has 170GB of free space (do not ask why I left this empty space ). Onde day I needed to use this free space and formated it using the windows. It worked fine, but when I reestarted the notebook my grub did not opened! To solve the problems I tried to recovered it but with no success, so I found a tutorial to reinstall the grub, It worked partially, because my open suse partition was not detected and I can't access it.
View 6 Replies
ADVERTISEMENT
Aug 27, 2011
I am running Windows 7 and openSuse 11.3 as a dual-boot system. I had to run a Windows 7 Startup Repair, which apparently reset the Windows boot loader, so now I am not getting Grub. How do I reinstall or reactivate the Grub boot loader? I am assuming I have to use the installation DVD?
View 6 Replies
View Related
Mar 11, 2010
Due to lack of concentration, I inadvertantly ran PClinux(2009-2)'s "install.sh" while I was in openSuse 11.1. This file says:
grub --device-map=/boot/grub/device.map --batch <<EOF
root (hd0,6)
setup --stage2=/boot/grub/stage2 (hd0,6)
quit
EOF
I soon found out that Suse 11.1 would no longer boot from boot.ini (using bootpart) because the boot process now brings up PCLOS (in /dev/sda6) rather than Suse 11.1 sitting in /dev/sda5. No problem, I thought, I'll boot from the Suse install DVD, use repair, and away I go. Wrong. After grinding, it started mentioning about generating something for sda13, which is my last partition. NTFS! So I bailed before it got too far. I even tried "rescue" option on the DVD, command prompt, and grub commands to reinstall via "setup.
Then I tried to use Super Grub Disk (.97xx) to reinstall the PBR, stage 1 and stage 2 loaders. Didn't change a thing. So then I used Grub4DOS and got into my Suse 11.1 installation using this in its menu.lst:
title openSUSE 11.1 - 2.6.27.45-0.1
[Code]...
Worked fine, and is now my (only) method of booting to 11.1. So obviously it's bypassing stage 1 and 2 files, using it's native Grub4DOS code. But then I tried Yast-Bootloader to reinstall Grub's files. No difference. Then I used the advanced part to "write bootloader code to disk" No difference. Even tried "propose a new boot scheme" (or whatnot) no difference. After looking at all this, I've come to the conclusion that the PBR code in sda5 is scraunched, and/or stage 1 code (although it's still the original date), or stage 2 (which definitely had a new timestamp of when I committed the fatal error by executing PCLOS's "install.sh".
So my question is this: How do I do a good COMPLETE re-install of Suse's version of the grub files? Because, for sure, grub commands like "setup --stage2=/boot/grub/stage2 (hd0,5), and variations thereof, certainly aren't doing it? My reasoning is that I should make sure that all the boot files get restored/confirmed as "originally installed by Suse".
View 9 Replies
View Related
Jan 8, 2011
I had dual boot PC (openSuse 11.3 / Windows XP). Then I had to reinstall Windows XP, so I lost dual boot capability. (No Grub boot options screen, directly Windows boot.)How can I reinstall Grub (only Grub)?I tried by booting with the openSuse installation DVD, but no repair option appears as in older versions.
View 5 Replies
View Related
Apr 29, 2010
I recently installed opensuse 11.2 on my laptop which also had windows vista and windows 7, i created a new partition and the installation went smoothly, after i went to boot back into windows 7 i got a blue screen of death, strangely vista boots perfectly.I could just reinstall windows 7 but its a pain to reinstall all my programs and such
View 6 Replies
View Related
Jan 5, 2010
How do I reinstall GRUB after a Windows install? I tried using the LiveCD but when I pop in the CD and type
Code:
View 2 Replies
View Related
Nov 21, 2010
I re-installed Windows over an old Windows partition. The hard-drive used to have Windows and Ubuntu on it. I am now in usb live ubuntu because grub doesn't appear anymore when I boot the computer (it boots in the new windows automatically). The ubuntu partition is still there, as I can access my files from this live usb. I'd just like to know how to re-install grub.
View 1 Replies
View Related
Feb 7, 2009
I need a solution for my problem, I need to install and manage my clients & servers through active directory, currently server have installed FC10, I want to install Windows 2003 Server Enterprise with AD (Active Directory) but this installation update the MBR of hard disk, so how can recover or reinstalled the grub w/o re-download the FC10.
View 1 Replies
View Related
Feb 4, 2011
how do I retrieve/reinstall Grub without having to reinstall Ubuntu?
View 1 Replies
View Related
Jun 11, 2011
After installing Windows 7 on my laptop, which was already running Natty, I am having issues reinstalling grub. I tried to do this using the method from this tutorial: [URL]... when I enter:
[Code]...
I also tried using --root-directory instead of --boot-directory, and I tried --recheck on both of them without any luck.
View 9 Replies
View Related
Dec 6, 2010
i have ubuntu 10.04 64 bit installed and configured and working sweet. I have reinstalled windows 7 and now i can't boot ubuntu i've tried easybcd to add ubuntu to win boot loader which failed and tried to follow the instructions to reinstall grub through a live cd which i am in at the moment. i go to a terminal and type sudo grub and it brings up the grub prompt. i have mounted all discs and entered the command find /boot/grub/stage1 and it keeps spitting this back at me Error 15: File not found
my hd is a 80gb with partions like this
/dev/sda1 105mb ntfs system reserved
/dev/sda2 45gb ntfs win 7 home premium 64 bit
/dev/sda3 34gb ext4 ubuntu 10.04 64 bit
/dev/sda4 1.5gb linux swap
View 9 Replies
View Related
Dec 10, 2010
I have ubuntu 10.10 running on my HP dv5 pavilion laptop So today i tried to reinstall grub on my pc .. i removed grub-pc and grub-common using synaptic then booted up with a live cd of ubuntu 10.04 i then mounted sda11 to mnt using sudo mount /dev/sda11 /mnt sda11 being my ubuntu directory containing the /boot then i installed grub to it using sudo grub-install --root-directory=/mnt /dev/sda it reported as installation finished.No error reported then i unmounted /mnt and checked for /boot/grub/grub.cfg seems like the file is missing so are the files in /etc/grub.d/ reinstall my grub back
View 9 Replies
View Related
Jun 2, 2010
Can I use the grub command line to reinstall grub from a ubuntu cd?
View 1 Replies
View Related
May 1, 2011
I need to reinstall the 11.4 bootloader (but to the root partition instead of the MBR). There used to be an automated repair GUI on the 11.1 DVD, but it seems to be gone from the 11.4 distro. Is it someplace special I can find it? Can I use my 11.1 DVD to just (easily) reinstall the bootloader? I am *not* a command-line person!!
View 4 Replies
View Related
May 4, 2010
After have the gui completly f***d up with an upgrade that messed up kde, I'm about to restore the original kde from the installation dvd (11.1) but there is no particular options to only restore kde, so I have concerns concerning some of those applications compiled and installed after the original installation (two years backward). I also updated the kernel to make things work with vmware...I don't want to loose time to recompile all the different stuff I need to work with linux.
Is there a way to be sure (by renaming /usr /bin /sbin for example) to keep the kernel alive (with libraries and headers) and all applications that were working very good before I did this update for kde (I won't do this again trust me)?The kde group never told me how restore kde from the original dvd so I'm a little disappointed because the system is working ok in run level 3.only kde is dead.I'll dig deeper before doing the reinstallation of suse 11.1...
View 9 Replies
View Related
Aug 2, 2010
On my Desktop I am experiencing a very weird behavior. First of all, I would like to mention that I am posting from the very same machine...just under Windows (which tends me to roll our hardware issues).
Next, a short history I installed 11.2 on my machine when it came out last year. I upgraded my hardware (new mainboard, cpu, ...) without reinstalling. Everything went fine I upgraded to KDE 4.4...still everything ok I did a system upgrade to 11.3 final using zypper And there it starts. After the upgrade, the first boot didnt work as expected (the system just hang). So I just did a restart and 11.3 was up and running. Now, since last week, I cannot boot my system at all. The screen just shows me the boot-splash but the progress bar isnt moving a thing. So I started with the option splash=verbose which did not show me a single line of output. The system just hangs right after the GRUB selection occured. So I decided to download 11.3, burn it to a disc and reinstall it. Well...this doesnt work either At least it shows me some lines of output, which look fine, but some lines after starting KDM the screen goes black and thats it. The only way I got something was when I started the installation in Textmode. I was able to log in but I dont know what to do then. I ran yast2 but it didnt look like I could install the system that way.It would be nice to get it running with my home-partition still in place.
View 6 Replies
View Related
Sep 19, 2010
After working with a more or less stable system I decided to install 11.3 on my system. Atm I am working with a updated 10.3 (prop state is 11.2 now after kernel update) Installed is Gnome, KDE3 and KDE4 - using KDE3
Now the question can I reinstall Opensuse 11.3 to my root partition and keep /home successfully? It is on a separate partition (Doing backup atm also). I understand that I will have to set it as mountpoint during installation. When asked to create user I stopped as I am scared if I add a user with the same name as on my old install it will overwrite the current folder in mounted /home... I seriously like my old username and want to keep it - can i safely add the user during install? will my stuff be still there?
View 6 Replies
View Related
May 19, 2010
Deleted my ati drivers accidently during a botched upgrade. Have been trying to fix the problem from things I read on here, made a thread but can't get online to execute it.Found my install dvd tried running repair and in the process deleted my windows partition(anyway to get that back?) and still no previous ati drivers or gnome installed.
When I boot up i see SUSE LINUX not opensuse... no grub So my question is how do I install ati drivers from the dvd and how do I install gnome or kde from install dvd? did i royally mess up and basically now just completely reinstall opensuse 11.2 completely? and if so can I recover files from my deleted windows partition and previous opensuse partition?
View 5 Replies
View Related
Jun 9, 2010
I am running OpenSuSE 11.2 64bit which was upgraded from 11.1. When I moved to OS 11.2, I found out the hard way about VMWare not working. Then tried to remove it and fix it myself.
When I try to run the config script...
Code:
parents:~ # vmware-config.pl
Unable to find the answer LIBDIR in the installer database
(/etc/vmware/locations). You may want to re-install VMware Server.
Execution aborted.
parents:~ #
When I try to install vmware-server
Code:
parents:~ # rpm -i VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed
When I try to upgrade vmware-server
Code:
parents:~ # rpm -U VMware-server-2.0.2-203138.x86_64.rpm
package VMware-server-2.0.2-203138.x86_64 is already installed
When I try to force install vmware-server
Code:
parents:~ # rpm --force VMware-server-2.0.2-203138.x86_64.rpm
rpm: only installation, upgrading, rmsource and rmspec may be forced
Other than rebuilding my box, how can I recover from this?
View 2 Replies
View Related
Feb 1, 2010
i want to reinstall my OS, but use kernel 2.6.31.5 instead of 2.6.31.8. Are there settings in the install that I can change to do this automatically?
View 1 Replies
View Related
Sep 3, 2010
I've installed open suse with no problems however I accidentally put my root folder on an external HD. I want to have my root on a partition of my main drive so I can continue to dual boot windows. Is there a way to move root so I don't have to completely reinstall and set up all my packages and stuff again.I assume to do this I need to use the installation disk again and fix it before boot up but should I partition my main drive first. I'm being intentionally cautious as there is data I'd rather not lose on there.
View 9 Replies
View Related
Aug 31, 2010
I've recently installed openSUSE 11.3 with GNOME When I was working on desktop settings, it locked itself, and it doesn't accept password I set during installation. I know that password is right, because it worked in YaST.
How to solve this problem without loosing any files? I haven't done backup... Is it possible to reinstall system, without formatting hard disk, and loosing files?
View 9 Replies
View Related
Mar 31, 2011
So I recently installed openSUSE KDE (latest build, don't know the number?). total linux noob, been a windows user all my life. right now i'm dual-booting between win 7 and opensuse KDE. i originally alotted for a parsley 10gb only to use as a backup whenever my windows inevitably starts having problems and i have no access or means to repair it/ use as a secure place to scan my windows partition and external drives for viruses. i want to expand my opensuse partition.
so my problem is this: i have a 200gb windows partition, a 15 gb partition (U) i set up to do file swapping cross-os (which i couldnt figure out how to work, btw. formatted it in FAT32). and my 10 gb suse partition (O). i tried using the built-in KDE partition manager to shrink or completely do away with U, and expand the suse partition. the problem is my suse partition is ecapsulated by an extended partition, whatever that is, and suse has its own 1.5 gb "swap" partition. after shrinking U i tried expanding O, but it said i was already at max size. tried expanding extended, also didnt work, same goes for the 1.5 gb suse swap partition.
i read in another post that i could do the resizing via some sort of bootable disc, the only problem is that i have no access to cd or dvd blanks, and i have no usb thumb drives just 2 external hd's - 1tb and 250gb. so how can i go about expanding my opensuse partition? the easiest way i could think of is to just reformat/repartition from windows, and reinstall opensuse from my boot dvd. only problem with that is i cant SEE my suse partition from windows...
i imagine i could also just boot from the dvd and run the installer again, and use the partitioner built into the installer, but i didn't really feel comfortable with it the first time around. im know my way around a computer but all of a sudden it blindsided me with a ton of options i know nothing about, it was a little too complicated.
View 2 Replies
View Related
Mar 15, 2010
I would like to try to reinstall a barebones xp on a compac laptop as a dual boot with 11.1. I repartitioned using gparted so I now have 20 Gb free. Here (I hope) is the output of fdisk -lu [URL] I spent a lot of time setting up opensuse and don't want to lose the settings, etc. Should I repartition with the 20G space "in front" of the linux partitions? Can I back up the linux settings so I can reinstall them if I lose everything? Is there a sort of windows emulator (wine?) that will run programs that won't run on opensuse, like netflix, tax prep software, etc? Too many questions I know but I would like a fairly simple foolproof fix if possible.
View 9 Replies
View Related
Feb 26, 2010
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies
View Related
Apr 17, 2010
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
View 6 Replies
View Related
Apr 27, 2010
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
View 9 Replies
View Related
Jun 7, 2010
I have installed 11.2 next to my 11.1 version I have a few big problems with 11.2 and I like to completely remove it. there are 2 grub's active now. I want to remove the 11.2 grub and make the 11.1 grub master again, but I do not know where to change this, the MBR points to the 11.2 grub and changing menu.lst probably does not have any effect.
View 6 Replies
View Related
Feb 14, 2009
In RHEL 4 grub.conf file has to be delete. how can i reinstall the grub?
View 2 Replies
View Related
Feb 18, 2009
I reinstalled winXP and lost grub loader. I have LiveCD with Fedora 10. How can I reinstall GRUB using this CD ?
View 14 Replies
View Related
