OpenSUSE Install :: SUSE 11.3 On Dell E6410 - Screen Went Completely Black
Feb 27, 2011
I have my brand new Dell latitude e6410 delivered with Windows 7 already installed. I want a dual boot and I decided to try SUSE for the first time. I used the installation DVD, the installation seemed to end up well. The problem is that already at the first reboot, the screen went completely black. By pressing ctrl-alt-del I can reboot the laptop. It seems to me a problem with the graphic card.
My setup is:
Dell Latitude e6410
Intel i5 m560 @2.67 GHz
nVidia NVS 3100M
4Gb DDR ram
Intel 82577LM Gigabit Network connector
If I start in failsafe mode, the X server starts, I have KDE, although with a somewhat sketchy graphic, I can use SUSE almost normally. The main problem in this case being that the system doesn't find any ethernet/wi-fi device, so I cannot connect to the Internet (I'm writing from Win7 right now). I tried choosing the default SUSE boot with the additional boot option "nomodeset" at the grub prompt. This is a suggestion mentioned in another post on this forum, although in that case the problem was coming from a bug dealing with an Intel graphic card. The system goes up but then kde doesn't start. I'm asked to lgin at a prompt. If I try to launch kde from command line (startkde), it complains that the variable $DISPLAY is not setup.
This is where I am now. I'm quite out of ideas, so I want to ask you few things. First stupid question: is the problem coming likely from the drivers of the nvidia graphic card? Second question: in that case, how can I fix it, considering that the linux partition is "isolated"? The fact that in failsafe SUSE doesn't see any network adapter concerns me a bit.
View 8 Replies
ADVERTISEMENT
May 9, 2010
I'm trying to install OpenSuse 11.2 64bit on a new Dell Latitude E6410 notebook. This is the Intel i7 processor with 8 Gb of RAM and Nvidia NVS 3100M graphics. I can boot from my 64bit installer DVD, but once I choose either Live version, to test it out, or just go for Install, after the first selection screen where I can change the default video at the bottom, I just get a black screen, no video.
I can't find any info on installing Suse on this notebook, (I think its only be available for a couple of weeks now). What do I do to get the screen to show me the graphical installer, Or how do I make the KDE Live version run from the 64bit DVD. I also tried the 32bit version DVD, but it wouldn't give graphics either, so it seems like an X issue.
View 9 Replies
View Related
Aug 19, 2010
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
View 9 Replies
View Related
Aug 22, 2010
having trouble during the openSUSE 11.3 installation on my new computer. Basically after it is done copying files and once it restarts for the first time during the installation to do the automatic configuration no video appears and the screen is black.The laptop hardware is:
intel QM57 chipset
i7 extreme 920xm
quadro fx 1800m
am tired of windows 7 and it's deficiencies and would like to continue using this great operating system on my new computer.
View 2 Replies
View Related
Mar 20, 2011
I'm installing OpenSuse 11.4 to a HP DL180 G6 server, with no luck. I go through the installation process when booting up from the DVD, and when it finish and restarts in loads Suse and then goes to a black screen and doesn't respond.
View 9 Replies
View Related
Jun 3, 2010
I am trying to put FC12 on a new Dell E6410 (laptop) with video "00:02.0 VGA compatible controller: Intel Corporation Device 0046 (rev 02)". I used the Live disk and successfully installed, but then I updated. Thereafter when I boot I get a black screen. I cannot even get to the login.
Unfortunately I really do not know where to start to try to trouble shoot. (I can get into run level 3 on the latest kernel). Also the issue seems to come about from kernel 2.6.31.5 to kernel 2.6.32.12 since the blank screen issue does not arise in the former. For now I switched the order of these kernel in GRUB so the older one boots first and this seems to work.
Although the blank screen is my most pressing issue, I am having others too (synaptic mouse, wifi, suspend, internal camera). Well, hopefully once I can run the newest kernel these issue will disappear.
View 8 Replies
View Related
Jan 8, 2011
I was playing Minecraft last night when the screen went black. This is apparently a known issue when you're using the wrong java version or something, and I've gotten this crash in the past, but I've always just restarted to get my computer back to normal. However, when I restarted my computer, the monitors would not get any signal from the computer. They just stay black. I tried restarting, shutting down all the way and turning it back on, and nothing works. The computer just stays completely black.
I tried turning on the computer then SSHing into it, but it's not working. I'm not sure if I had it set to auto log in, so it might be that I'm not logged in, or it might be something more insidious, but as I can't see what's happening I don't know what the problem could be.
View 2 Replies
View Related
Jul 29, 2010
I just received my brand new E6410 laptop, which have i5 processor and wish to install ubuntu 10.04 on it.
I am wondering which should I choose: 32-bit or 64-bit?
View 4 Replies
View Related
May 26, 2010
for any reason after installation system hangs up and nothing happens, i�m newbie about linux, maybe the problem is the RAID 1 configuration of the disks. The machine is a R710 Server:
2 x Xeon E5520
4 x 2 GB Memory
4 X 750 GB SATA 7200 3.5" disk
PERC 6/i Raid controller
View 9 Replies
View Related
Oct 5, 2010
I just got a new laptop, and installed fedora 13 on it. I have had no major problems, until i tried to hook up a external monitor. It does not show up in the gnome-display application, and the keyboard switching button combination (Fn+f#) does not work. On my past laptop, this worked fresh from the install, f8->f10->f11.
System:
Dell Latitude E6410
nVidia Corporation GT218 [NVS 3100M] (rev a2)
Code:
$ yum list installed | grep nvidia
kmod-nvidia.x86_64 1:256.53-1.fc13.4 @rpmfusion-nonfree-updates
kmod-nvidia-2.6.34.7-56.fc13.x86_64.x86_64
nvidia-settings.x86_64 1.0-6.fc13 @rpmfusion-nonfree-updates
[code]....
PS: is there a way to make it so that a box as above is contracted, requiring a click to expand?
View 3 Replies
View Related
Jul 12, 2010
I've installed the drivers from nVidia. When I go into the NVIDIA X Server Settings application, in the X Server Display Configuration setcion, and click the "Configure" button, "TwinView" is disabled. Also, clicking "Detect Displays" doesn't pick up my monitor (which is connected through a port replicator - keyboard and mouse in that port replicator work fine).
Has anyone else seen this? Is this just a limitation of the current nvidia linux drivers?
View 3 Replies
View Related
Aug 26, 2010
Sometimes, (the most when I'm making changes in something, like the pager, appearance, theme, etc), the screen freezes completely (but mouse is moving) and I have to restart the system.
If I try it again, it crashes at the same point.
View 4 Replies
View Related
Nov 20, 2015
I just installed Debian jessie on my Dell Latitude E6410 using the UEFI install. No everything went well during the install, but after the install the first boot i ran into an issue that the laptop will not boot.
When I go in to the boot menu of the Dell Latitude E6410, I see that debian has created a uefi name (Debian)
When I select this, it boots without any issues. After again a reboot again, no luck still a black screen during the boot.
Seems that the only option to get my laptop booting is by pressing F12 and select Debian in the UEFI boot of the laptop.
Is there any way i can get my laptop to boot Debian directly from UEFI, without having to press F12?? (Also disabled all legacy devices to start up but no luck)...
- Debian Jessie X64 (Using 32/64 network install, via USB)
- Dell Latitude E6410 i5 (1280x800 intel graphics) latest bios A16
- SSD drive (Samsung 470 series)
- Debian is the only OS installed
View 1 Replies
View Related
Aug 1, 2010
I installed Ubuntu 9.04 on a Dell Latitude E6410 I have neither Ethernet connection or WIFI connection.
If I could figure out how to download the kernel source for ubuntu 9.04 then I can build the devices into the kernel and get them working.
Where can I find the source for Ubuntu 9.04, kernel 2.6.28-11-generic.
Also, there are names for the Ubuntu. How to figure out the name of my OS?
Note, I tried to install Ubuntu 10 but the screen was blank after I booted off the installation CD.
View 2 Replies
View Related
Oct 30, 2010
Ive been trying everything possible, and cant get this Intel card to connect. Here are the details Centos 5.5 Kernel 2.6.18-194.el5 Intel 82577LM Gigabit on dell laptop e6410 Broadband router with gateway 10.54.7.1 My network is 10.54.7.* linux sees the exact card in the configuration utility. If I choose dhcp, and try to bring up teh device, I get "no network, cable unplugged?" error If I configure static ip for eth0 like
10.54.7.2
255.255.0.0
gw 10.54.7.1
The interface will come up (seen in ifconfig) but cant ping the gateway. At one point it did work... I just cant get it back - Ive reinstalled like 4 times... in hopes Id catch something different, no luck. My network serices about 10 pcs many of them centos linux - no problem using static or dhcp with my router- I just got this new laptop and cant get ths card to work.
View 4 Replies
View Related
Jan 13, 2010
So I'm in need of VM'ing a couple OS's to keep from repartitioning and dual booting my desktop. The first I'm trying to boot is a 64bit version of windows (have XP and 7 disc, trying XP for now) as I need to convert some of my work's ancient programs that still use DOS functions.
I choose Virtualbox over VMware just for the sake of VB being in the repos. Install and initial config went fine, but when I try to start (run) the VM the screen goes black, then the computer completely stops responding and needs a hard reboot. Pasting what I believe to be the error part in the log. If you need the entire log I can email or host it - too big for a post. Kernel Version - 2.6.32-trunk-amd64. Debian Sid
Short Version:
Code:
View 14 Replies
View Related
Mar 9, 2011
I try to install openSUSE 11.4 KDE RC 2, unfortunately I show black screen after GRUB screen. I must press Power button to turn off my computer. I hope it won't on openSUSE 11.4 stable. I'm waiting for downloading openSUSE 11.4.
View 8 Replies
View Related
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
Sep 2, 2010
I've got a problem with my openSuse 11.3 for a few days. This is my first Linux so i'm kind of rookie.OK, let's start.I installed it something like 1 month ago and everything looks good until now. When I turn on my PC and try to login (deskop mode) login bar goes from 30% to 50% and then appears a black screen, nothing more, just deep black (cannot type anything etc.) I use GRUB - Windows, opensuse deskop mode and failsafe mode. Failsafe mode works good, but I have no idea what should I do because I didn't change anything. I even done a reinstall of OpenSuse and after one day I've got the same black screen.Someting wrong with grapfic card drivers? (ati 4850, downloaded from ati page, works good for 1 month) maybe some kind of new update which was installed automatically?
View 3 Replies
View Related
Apr 16, 2010
I'm wondering why everytime I install "recomended" updates, my KDE or X server crashes completely! is there any guide or advice you can give me to succesfully update only the packages that are really needed?
View 9 Replies
View Related
Jul 18, 2010
I have suse in my PC. I want to format my harddisk completely and install suse again.How can I do this. I have the linux OS CD with me.
View 2 Replies
View Related
Dec 24, 2009
I'm running openSUSE 11.2 on a Thinkpad T61p with nvidia graphics. I'm running the proprietary nvidia driver.The battery ran very low and the computer suspended itself. After I woke it up, the desktop is completely black.After troubleshooting as much as I could, I did ctrl-alt-backspace, which brought me to a normal (non-black) login screen. However, as soon as I logged in, I was back to a completely black screen. But the system is operating.I rebooted the computer (warm reboot as well as cold restart) and each time the video is normal until I get to the desktop and all I get it black.Everything was normal until the pm suspend.Suspend has never worked exactly right, so I don't normally use it. But in this case, it used itself Next step: I logged in to console mode and looked at the logs. The only messages of interest seem to be in Xorg.0.log I found a couple error messages that might be of interest:
(II) LoadModule: "nouveau"
(WW) Warning, couldn't open module nouveau
(II) UnloadModule: "nouveau"
[code]....
View 9 Replies
View Related
Feb 18, 2010
I'm on a JFK assassination binge right now
Every ten minutes or so the screen goes blank and I have to hit the keyboard or wiggle the mouse to bring it back to life
This isn't hibernation...for the audio still works
I've looked around the control center...right clicked the desktop and looked at options there
View 5 Replies
View Related
Mar 2, 2010
I have been using OpenSuse at work for years. My Windows 7 machine crashed on me. Instead of spending the time to fix it, I decided to take the plunge and install 11.2 on my home system. I have 4 one TB drives. My RAID card has a 2x2 1/0 RAID array defined (sdb, sdc, sdc, and sde). A fifth hard drive, outside of the arrary, which is a 250GB drive (sda). It is a software RAID. Here are the partitions I set up in the installer.
On the raid:
1.75 TB on /home
2.01 GB on swap
48.55 GB on /tmp
Off of the raid:
sda1 115 GB /
sda2115 GB /boot
(I know these are really big but I did not want to put any data outside of the RAID) In the final Installation Settings screen, I chose Booting and change from booting from the MBR to the /boot partition. The boot loader type is Grub and the status location is at /dev/sda2. I select Install and it installs without any error message.
After it installs, it restarts and I press ESC to see what is happening. It skips boot.cycle and continues to load to "starting HAL daemon ...done" and then the cursed black screen. I cannot SSH into it. It just sits there and I have to do a hard resest. Once I restart it, it boots into the non-RAD drive I get the follwing error message:
GRUB ..(it went to fast for me to get the rest of it)(hd1/1) message: file not found and I get the option the change the boot options of the Desktop -- openSUSE 11.2 and Failsage -- openSUSE 11.2 . I select e to edit the boot section of desktop and see
root (hd1,1)
kernal /vmlinz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-ST32508...
intrd /initrd-2.6.31.5-0.1-desktop.
I tried changing the root (hd1,1) to 0,1 1,0 2,0, etc with no luck.What do I do? I need to boot into OpenSUSE and finish the cursed installation.
PS: You can tell I work IT with the uber amount of details I put into this
View 6 Replies
View Related
Apr 7, 2010
I have registered a problem similar to the one reported in this thread: Solution to black screen problem in opensuse11.2 - openSUSE Forums
after installing openSUSE 11.2 from DVD, and rebooting the system a blank screen appears after booting process is completed.
Initially, I was thinking that was 'cause of the installation of ndiswrapper drivers (see command "modprobe ndiswrapper" not working - openSUSE Forums) but after the 4th (!) installation of openSUSE I really don't know what to think...
Sometimes openSuse boots regularly, and sometimes not... seems that there is no difference if I restart the PC or I turn it off and then off. Result is the same: sometimes I get the user desktop and sometimes not...
As explained in my previous post, I have checked the disk but all seems ok.
Now I cannot use the PC even in failsafe mode... I get always a black screen.
But what is more surprising is that I have 2 identical (identical!) PC with the identical hardware, and identical bios configuration. Only the monitor is different. Well, said that, one is working the the other one not...
To be honest, the working PC was an openSUSE 11.1 systems updated to openSUSE 11.2.
I think that must be something wrong on the distributed openSUSE DVD..
View 9 Replies
View Related
Oct 5, 2010
I tried both installing 11.3 on top of 11.2 and a new install with the same result on a couple of different mac pros (with 2009 ATI Radeon HD 4870 with 512MB of GDDR5 memory, 2.66 GHz 2x4 core Xeon 3500, 24 GB of memory). The install was done via the downloadable dvd from opensuse.org. The graphics of the install process looked fine as well as the configuration. When it came time to boot, however, the suse splash screen showed up and then the monitor went dark. The graphics seems to be frotzed. Now attempting to boot from the DVD does not cause the display to do anything. Even putting a mac DVD restore disk (and using C during boot) does not result in anything on the display). Any ideas of what the installation could have done -- seems like a no-brainer that something is screwed up with the graphics card, but I have no real proof and even less idea of what to try next.
View 2 Replies
View Related
Jun 2, 2011
I very frustrated at this point. I have tried to boot OpenSUSE 11.4 from the usb flash drive iso and CD iso. After I restart my computer the boot menu comes up and I click the boot option and the screens loads a bit and then goes black. I have also tried the text installer, but that doesn't work either. I know the problem must be my graphics chip. I have a integrated Intel HD Graphics chip. My laptop is a Gateway NV79. How can I get the graphics to work?
I've tried everything I can think off. I'm not the most computer savvy so if someone replies I would appreciate a dumb-down explanation on what to do with clear steps, if possible. Note: I'm dual booting with windows 7. The graphics problem is not just OpenSUSE. I tried Ubuntu 11.04, Kubuntu 11.04, Fedora 15 and they all have the same problems. In Fedora 15, I was able to boot in but I got an error message that said Gnome 3 fallback and I couldn't get the graphics to change to standard mode
View 5 Replies
View Related
Jun 26, 2011
Ive been a ubuntu user for about 3 years now, but lately I wanted to find something new. Ubuntu is beginning to feel less and less like "linux". So anyway I am having a bit of trouble getting my gfx card working in suse. I have a AMD Radeon HD 6850. In ubuntu I just get a popup says that restricted drives are available, and i click to install them. but In suse im not quite sure what to do. I believe I have the drives installed correctly, but I get a AMD watermark in the bottom right corner of my screen saying my hardware is unsupported.
What is the easiest way to get the latest working drivers for my video card? and keep them updated properly with each kernel update like in ubuntu? btw, im running openSUSE 11.4 64-bit.
I know this has been asked before, but im a complete noob to suse and I cant seem to find a answer that im able to understand.Other than this issue with my graphics driver I love everything else.
View 5 Replies
View Related
Apr 2, 2011
I get a black screen when I install the driver, plus:
Code:
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
is there a method to install the drivers on openSUSE 11.4?
View 7 Replies
View Related
Dec 9, 2009
I've installed 11.2 KDE on a very old samsung V20 specs here: [URL]... My problem is that when I boot I get a black screen with just the mouse pointer. I can boot in failsafe fine, but the graphics are horrible. My question is, is there a workaround or am I flogging a dead horse with this laptop? This is my first venture into Linux, and I was really keen on leaving windows far behind. I've tried quite a few sax2 commands to no avail.
View 2 Replies
View Related
