our prof wants us to make some measurable changes in the kernel as a part of our assignment. I'm new to linux (started using linux only day b4 yest)... till now i've built a new kernel using cloneconfig and ended up with a rpm package (since i couldnt find any other option).and here's the prob
1. how to make changes in the kernel code?
2. do i have to create an rpm everytime after a change? (it jus takes too long )
I'm running 11.2 with standard repositories (plus packman). I want to install a recent kernel and then compile some variations of it (to investigate a hardware problem).
So I took these steps:
(1) add the 11.2 Kernel:/HEAD repository
(2) enable multiversion in zypp.conf
(3) use YaST software management to select the kernel development pattern
Note that at the moment, the standard 11.2 kernel ( 2.6.31.14-0.6-desktop) is in use and I have not selected any packages from HEAD. But it has installed 2.6.37-41.1 versions of all the kernel packages I didn't already have (source & docs etc) instead of the 2.6.31 versions. /usr/src/linux symlinks to linux-2.6.37-41 instead of to a directory for the running kernel!
(1) it should have loaded the packages corresponding to the running kernel
(2) it's not supposed to switch repositories
This is completely baffling me..I have a Lenovo Thinkpad X301, which has been running OpenSUSE 11.1 for a while, with vanilla kernels from kernel.org, built and installed in the standard (i.e. not SUSE) way.
A week ago, I dupped to 11.2, and also installed kernel 2.6.38.4 . This was compiled with the gcc-4.3 available under 11.2. Everything worked fine (after the necessary messing around to get X working again).
This weekend, I dupped to 11.4 (via 11.3, of course). After more messing around to get X working again, things were working ok - using the same 2.6.38.4 kernel I'd built under 11.2. I then re-built the kernel. It appears to compile and install ok, and I haven't changed the configuration or the grub configuration. However, it doesn't load. Normally, I just get a blank screen after grub starts it loading. If I boot in basic VGA mode 0, then I get a few lines of messages before it hangs - it hangs complaining about APIC not connected to io bios, and if I boot noapic, it gets a few lines further before hanging after some message I don't know about (allocating 4 HET). I don't suppose that's relevant, anyway.
I've tried three different gcc versions, and two different linux versions (2.31 as well), and the same thing happens. This sounds like something going badly wrong with ld or as or something - but I don't see how anything could have happened that wouldn't have been noticed by thousands of others.
At this time use opensuse11.3 (all as deafult).In this place The Linux Kernel Archives read about new kernel:stable: 2.6.37 2011-01-05 How compile and boot opensuse11.3 with this new kernel ?
View 2 Replies View RelatedI am gonna compile and install new kernel 3.0?
what is your suggestion?
shall i? on my duo Core? with 2.7 gb ram?
How can I install or compile this driver in ubuntu kernel.
View 5 Replies View Relatedwhenever i'm in the process of compiling and installing a new kernel in ubuntu lucid lynx i get an error message when i get to the make bzimage part is there some sort of program that i needed to install first or is there an alternative to doing this.
View 8 Replies View Relatedi want to compile the vanilla kernel 2.6.37-rc3, but i want to obtain a .rpm file. I found this guide long time ago (i used it many times) but it use src.rpm package and the contained kernel.spec file have many lines for adding patches. Someone know where can i download a kernel.spec for vanilla kernel or a guide to obtain an rpm file
View 4 Replies View Relateddefault in openSUSE 11.2 we have installed kernel-desktop. This kernel is optimized for the desktop.
What is the name of kernel optimized for server machine? In my case Firebird database + Apache + PHP?
A few days ago yast did update my computer to a new kernel-desktop 2.6.31.12-0.1.1.
My mainboard is an ASUS P4P800-VM with Intel ICH5 chipset. This new kernel is not able, to poweroff my computer. Older kernels were able to poweroff the computer.
How can I roll back to the older kernel? Yast does only offer the recent kernel.
In /boot there are only files of the recent kernel.
ASUS P4P800
Intel Pentium 4 HT, 3000 MHz, Frontside 800 MHz/Cache 1 MB
3 GB Ram
AGP nVidia 7600GS/512 MB, nVidia driver 190.53, installed from yast.
PCI WLan TP-Link 951N (Atheros chipset, WLan N, driver ath9 was automatically installed)
I am using Opensuse 11.2 on an HP Pavilion laptop. The internal wireless (Broadcom device) quit on me - It is no longer detected at boot so I assume it is dead. No problem since I have a D_Link USB adaptor (DWL-G132). To get it working however I need ndiswrapper. I then installed ndiswrapper 1.55 and the user interface supplied with Opensuse. Problem1- The interface says "The program 'kernel-headers' is missing on your system".
I have checked with Yast and the kernel-headers are installed. Problem2- I have downloaded ndiswrapper 1.55 from Sourceforge.net to attempt the traditional installation method. The 'make' command returns the following message: "Cannot find kernel version in /lib/modules/2.6.31.8-0.1-desktop/build, is it configured?."
I'm runing FC11 and have compiled the vanilla kernel 2.6.33.4 to support Dazuko. It has broken my NFSD server in the process, and I can't figure out why. I get these errors on boot. FATAL: Module nfsd not found. FATAL: Error running install command for nfsd
[code]....
I'd like to install the following plasmoid HDAPS monitor KDE-Look.org. For some reason it is no longer available for openSUSE.
how I should compile this and then install it.
EDIT: should have specified I'm using 11.4 and KDE4.6.3
I have a couple of USB pen drives, they are 8 and 16 gigs.I want to set one up to run as a �Live KDE� drive and put the �install DVD� in the other.Where would I find directions to do this?
View 2 Replies View RelatedI am very much a Newbie to Linux/Fedora. Just installed Fedora 10, but having some problems with hardware driver recognition, particularly a wireless network PCI card. ndiswrapper is looking for a kernel in usr/src/kernels, which doesn't exist.In Fedora, is it necessary to compile a kernel? Looking through the FAQ at kernelnewbies, states to extract the kernel to a Linux directory, in usr/src, which also doesn't exist.
View 12 Replies View RelatedI would need to compile some old codes with g77 (unfortunately, they doesn't compile with gfortran). The gcc44-fortran is installed on my computer but if I have well understood, there is no g77 compiler in this package... Do you think I can install gcc33-fortran without creating conflicts between the 2 packages?
View 2 Replies View RelatedI was wondering if someone could maybe provide me with a list of things to give a new user using the useradd utility. ( home directory, permissions, etc.) or even point me in the direction of a solid walkthrough
View 4 Replies View RelatedI am running OS 11.3 and I want to create a boot CD so that if my boot partition is moved I can still boot from the boot CD and re-initialize grub again. Is there some easy to use utility which will enable me to do this ?
View 3 Replies View RelatedI am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
I can not install files RPM, says there is error in the request.
View 1 Replies View RelatedI am trying to build the java gnome gtk+ bindings on open suse and ran into a snag. the libcairo2-dev package is not apart of pensuse - how ever it is apart of ubuntu and the debian launchpad. can i install other distros repos to solve this issue? actually no i cant. how to install this package? zypper install libcairo2-dev comes back as not found.
View 9 Replies View RelatedI tried to down grade my PHP5.3.x to 5.2.6 and some how I broke the connection to my Mysql. I needed to do this for version 6.xx of Drupal. Anyone know a quick fix to the mysql.lock or do I have to re-install Mysql?Error Message:Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (13).
View 6 Replies View RelatedI have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.
View 6 Replies View Relateddifferences between Kernel Default and Kernel Desktop? I've found some past threads like this link and this other link, and some other google info, which suggest the only difference would be the io scheduler. Also, I see the default grub choice is "Desktop" and not "Default", so I take this as a suggestion to prefer one over the other.
However, my broadcom 4312 wireless only works on the "default" and not on the "desktop" kernel, so I guess there must be other differences. I just want to evaluate which one is the less long-term risk option to go.
I want to Install my Razer Deathadder on Suse 11.1, I allready found a programm: bu3sch.de The problem is, I cant compile the code. I cd into the folder with the source and use make (as root) and get this error:
[Code]....
I have been using GHOST for quite a few years to back up my Windoze partitions from NTFS to a series of images on a fat32 partition. I usually boot off a DOS7 bootable CD and simply ghost over to the fat32 partition.
I am rebuilding my laptops and desktops to dual boot Windows7 and Suse 11.2
My goal is to create restore images from my NTFS and ext3 partitions into directories on the fat32 partition for a restoration to my "gold baseline" build after any corruption.
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
1 = Windows-7
2 = /boot
3 = swap
5 = /
6 = /fat32
[Code]....
I tried installing the RPM from tcpflow website. error: Failed dependencies: libpcap.so.0.6.2 is needed by tcpflow-0.21-1.i386 I installed libpcap1-32bit, but doesn't help. I tried added soft-link to libpcap.so.1.0.0 from libpcap.so.0.6.2 to workaround, doesn't help. hen I DLed the tarball, ./configure gives an error, even after including --with-pcap=/usr/lib64/libpcap.so.1.0.0 checking for --with-pcap option... configure: error: /usr/lib64/libpcap.so.1.0.0 does not exist I CAN'T install the rpm, I CAN't compile from source. I can't find this program on any suse repo. I need to use this prog -- what can I do?
View 14 Replies View RelatedI am installing openSUSE 11.2 on a laptop. After installation, reboot, auto-configuration, the screen show lines of text following "Starting SuSEconfig. The latest line is "Creating cache files for fontconfig". I don't understand why this specific operation takes too long; since almost an hour has passed. Is there a way to speed up and complete the process so that I can login and start using openSUSE? I did try hitting the spacebar and moving the mouse but nothing happens.
View 1 Replies View RelatedI wanna compile tha kernel which is old one.how to do that.
View 8 Replies View RelatedI compiled kernel-2.6.32-71.24.1 on 32-bit rhel6, but there is no kvm.ko. what if I want to use kvm on 32-bit rhel6.
Steps to Reproduce:
1. install kernel-2.6.32-71.24.1.el6.src.rpm
2. rpmbuild -ba kernel.spec
3. find /root/rpmbuild/BUILD/kernel-2.6.32-71.24.1.el6/linux-2.6.32-71.24.1.el6.i686/-name kvm.ko
Actual results:
not found kvm.ko