I have a dualboot system with Debian, how can I make both systems read and write ALL files on the computer?openSUSE can't open the Debian's HDD and the other way round.. how can I change that?
View 9 RepliesCan anyone recommend a good all round flatbed scanner, (for 11.3)?Main use would be for document scanning, but should be able to cope with photos occasionally.
View 3 Replies View RelatedI set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
The following message comes up when I boot up: Logging in user Warning: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0. When I press OK, the system completes the start up and everything looks normal. But when I try to connect to internet, I get the following message:
KNetworkManager cannot start because the installation is misconfigured. System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution. KNetworkManager will not start automatically in future. If I reboot the system, I logg in successfully. So far the problem has appeared approximately upon every second time I boot up. Rebooting the system seems to take care of it.
Don't know what info is of interest. I'm using
Opensuse 11.2
KDE 4.4.2 (Factory)
After upgrade from 4.4.1 to 4.4.2 it worked fine for a week or so.
I just reinstalled my OpenSuse 11.3 with the GNOME desktop. As soon as I was done installing and I was on a fresh desktop, I installed the Yast updates that were available, rebooted, and now I can't login to any of my User accounts. Whenever I try to login, it tells me that it is "Unable to Open Session".o any of you know how I can fix this without having to reinstall all over again
View 1 Replies View RelatedI am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedI have installed OpenSuSE 11.4 on an HP DV6 laptop computer without problem. However when I boot the machine I get diagnostic messages immediately. First has anyone installed 11.4 on one of these HO machines? What diagnostic messages do you want to see to solve the problem?
View 3 Replies View RelatedI Have downloaded the ATI Drivers for my GPU From url.ymp But When I try to open the file This Message Appears :
This has happened After I Have Updated My Packages using
Code:
zypper update
The last round of updates to 10.04 changed the initrd image, which I wasn't expecting. How do I check the updates to make sure that this is in fact the expected behavior? I.e., how do I go back and check which updates were supposed to have been installed, check what was actually installed, and see which one modified the initrd and why?
View 4 Replies View RelatedI have been trying to install on my toshiba satellite c655 laptop the ubuntu operating system. Anytime it gets to where i can use it as a live DVD and I would want to install, it gets to stage 3 of 7 and gets stuck. No error messages are given, the install dialog can be minimized and other task done but the installation will never continue. Anyone with idea about how to go round it.
View 3 Replies View RelatedI want to use awk to list all the mount points, disk size and space available. Now I have all that info but I want to round the totals, so there is no delimiters, how can I do that?
PHP Code:
#!/bin/sh
date
df=`df -Pl | grep "^/dev" | awk '{print $6, $2/1024 , $4/1024}' | sed "s/%//"`
echo "$df"
[Code]...
if i am having say 10 number of linux machine over the network and want to setup password free SSH in round robin fashion means ssh from any machine to either machine. one way to do is generate the public key on every machine and put on other machine. is there any other shorter and simple way to do it?
View 5 Replies View RelatedDoes anyone know how to run 2 threads with round robin scheduling. & can we get the time of these threads when they are context switching. That means I want to know at how much time each thread is taking to run
View 3 Replies View RelatedI'm running 11.2 Gnome and I've installed Exaile and its now listed in Yast, but it won't open. I rebooted and it still would not open.
What am I missing to get Exaile to work?
I JUST registered here as I have not used Linux in several months. Linux and I have been and off and on relationship, but after I realized Ubuntus limitations Ive pretty much only dealt only with Debian (on PPC as well as x86, and also some Suse on x86).
Anyway, so I just picked up a couple Sun Ultra 5s for free. One had 256MB RAM (4 x 64MB), a 4.3GB IDE HD (no SCSI in the Ultra 5), and booted fine in Solaris up to the login screen at which point it wasnt really any use to me since I dont know the login name or password, and really want to run Linux anyway. The other I am told needed a firmware (chip?) and basically didnt do much more than power on. However, it had a 40GB HD and 2 x 128MB RAM modules. So, I replaced the 4.3GB drive with the 40GB, and replaced 2 of the 64MB RAM modules with 2 128MB modules, for a total of 384MB RAM.
BTW, both machines have the 270MHz Ultra1 CPU. Anyway, I used my main Windows x86 machine (which Im on now), downloaded the Debian SPARC net install, and burned it to a CD. Put the CD in the Ultra 5, installation proceeded nicely, though with one disconcerting message stating the urgency of which a reboot was required (though still telling me to wait for installation to finish). I mean, the whole installation process basically went perfectly except that one odd message.
So, when install is complete, I choose finish installation, the machine reboots, ejects the CD, and then ultimately get a message saying "cant open boot device". I am very new to Sun hardware, and am by no means an expert to Linux. The only thing Ive really tried so far is to type "boot hda" which only causes the same message to appear.
From previous experience, I have written on paper the info for all of my partitions. So I think my Debian install is sitting there waiting to be utilized, but the Sun hardware is oblivious to the fact that theres a perfectly good OS on the machine yearning to be booted.
I installed latest nvidia driver with SMXI. I have noticed that anything that uses open GL or GLX does not function. Screensavers, games etc. Output from glxinfo as follows
jon@DebSid:~$ glxinfo | grep "direct rendering"
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 138 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x3800003
Serial number of failed request: 30
Current serial number in output stream: 30
jon@DebSid:~$
System as follows,
Intel P4 2.66, generic descktop PC, Nvidia GeForce 7100 GS, Debian Squeeze/Sid
I am having a problem installing a game that is a .bin file. I have looked through various forums, and on Google, but can only find how to install .exe through emulation,open .zip, and other formats. I am using Dreamlinux Xfce desktop (Which to my understanding is Debian based). I pretty much have to face the fact can't figure out s**t on here.
I have tried running it from the terminal in these ways:
And some command I came across- $ Chmod (there was more to this command line but I forget it, found it on google, it ends with: +1 run)
I don't really grasp alot of the commands (I can look up DIR, run files, ya know ... simple stuff) and have spent most of the time just setting my OS to work, and this .bin is my first shot at an install...
I cannot open YaST nor 'install software' in the GUI. A new window is appears in the panel, but after 10 seconds or so it disappears. When in terminal, i can open YaST.
This happens from time to time and often after a while I can open it again in GUI (also when rebooting). It's very annoying when I want to install something and I cannot open Yast2 (I'm not familiar with terminal, so that's why i want to stay with GUI, which is KDE btw).
I do not even know what that is but I know I needed to install picaasa
View 3 Replies View RelatedI installed openSUSE 11.3 on my notebook (lenovo 510i, Intel Centrino Wireless-N 1000).When I connect to my home wlan with WPA2 there is no problem, but when I try to connect to an open WLAN without encryption, the essid is not set (seen with iwconfig wlan0). If I set it after rcnetwork start wlan0 with iwconfig wlan0 essid the_open_sid, it associates and dhcp is working fine.
Here are the messages that are produced during rcnetwork start wlan0:
Code:
Jul 16 13:51:48 job2 ifplugd(eth0)[4740]: ifplugd 0.28 initializing.
Jul 16 13:51:48 job2 kernel: [ 5819.161280] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
Jul 16 13:51:48 job2 ifup: eth0 device: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
code....
Is there a log with the wireless card setup commands that are used?
I can't seem to open up any .zip file with wine.
View 4 Replies View RelatedWhen I click download DVD 4.7 GB, on any browser (I tried in Firefox, Opera and Chrome) It started to download 4.3 GB instead of 4.7- The first Download was 4.2 GB and I though that was wright, but the checksum didn't match. Now It started download only 4.3 GB Why is that? How can I solve this ?
View 9 Replies View RelatedThats my problem at the moment, i cant open YAST without using the command "xhost +" before on bash.
openSUSE 11.4 64 bits.
I scanned my newly installed Debian 8 and found that i have two ports open.
22 for ssh which i want
111 can i safely close port 111 and how?
I'm trying to install the openconnect VPN client on a server machine, Debian 7 Wheezy, and APT is trying to install a lot of dependencies. I think it's trying to install the whole desktop environment.I was searching the web but all articles are for desktop machines and nobody mentions my problem with the dependencies. I also have openconnect installed in two Gnome desktop machines without problems.
This is the output:
Code: Select all# apt-get install openconnect
Reading package lists... Done
Building dependency tree   Â
Reading state information... Done
[code]...
I have a large amout of data (several GB) on a remote drive, that is transparently mounted via nfs. I'd like to copy these files into a subdirectory of where they are already residing, so everything stays on the same physical disk. For that reason, I would like to prevent an unnecessary round trip over the network.
It seems that cp files* subdir does the naive thing and reads all the data into memory and then writes it back. Is that true? Is there a special command that does the actual copying entirely on the server the disk is physically connected to?
The buttons on the left of the windows of Ubuntu 10.04 are square and not round?
View 1 Replies View RelatedWhen i try to open yast2 or install/remove software nothing happens! i tried to restart-logout-install a package from console but it still not warking!
View 9 Replies View Relatedis their a wubi like installer so i can try open suse without partitions?
View 5 Replies View RelatedI have tried liveCD, but open suse is running so slowly. Will it be faster when I install it?
View 8 Replies View Related