I'm planning to install openSUSE on a rather old computer(1,5 GB RAM 2,2 GHz Intel Celeron) and I have only 3,6 GB disk space at my disposal. Using Xfce or LXDE desktop environment what is the minimum installation size I can get while retaining a usable system?
View 5 Replies
Is it possible using YAST to make it possible to be given the option to boot the previous kernel when a new one is installed during an update?
View 9 Replies View RelatedI am new to linux, am attempting to abandon microsoft because after 30 years I have had enough of being jerked around by them. I have used yast to install the components of Postgresql and pgAccess, including language support for Tcl/Tk. Starting the postgresql server is successful.
I would like to use pgAccess as a front end to the server/databases. However, nothing I do seems to make pgAccess available. I can't invoke it and can't find it on a menu anywhere. In searching forums on this issue they all discuss compiling postgresql and pgAccess on the local machine, no one talks about how to use pgaccess whose installation was managed by a gui. Do I need to start over, removing everything I installed with yast, and go with the command line installs and compiles, or can I use what yast installed?
I previously used 11.1 with KDE 3.5. Since I have /home on a separate partition I decided to install 11.2 from scratch to avoid any conflicts with KDE 4 installing. No problems on first reboot and some updates were installed. Now at each boot I'm dropped into text login. If I try <startx> I get <no screens found> and /var/log/Xorg.0.log gives <screens found but none have usable configuration>. However if I add vga=952 at the boot screen (for a 1280x800 laptop) I get into graphical login and everything works well (yes even KDE 4). Below is an snip from /etc/X11/xorg.conf.
Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 305 230
HorizSync 30-52
Identifier "Monitor[0]"
ModelName "1280X800@60HZ"
Option "DPMS"
Option "PreferredMode" "1280x800"
VendorName "--> LCD"
VertRefresh 50-60
UseModes "Modes[0]"
EndSection .....
I downloaded some application for Linux (program microcontroller LPCXpresso). When I trying to install it some error appears
Code:
Can't find a usable init.tcl in the following directories:
/installkitvfs/lib/tcl /installkitvfs/lib/tcl8.6 /home/damon/src/installkit-1.3.0/out/lib/tcl8.6 /media/lib/tcl8.6 /lib/tcl8.6 /media/library /library /tcl8.6b1.2/library /tcl8.6b1.2/library
This probably means that Tcl wasn't installed properly.I think Tcl is installed, maybe I need to reinstall it if so, how? What I need to do?
I've got a CentOS 5.2 installation with broken package system. When I try to do "yum update" I get lots of "Missing Dependency" errors. How could I restore it to a usable state?
View 6 Replies View RelatedI have ubuntu 8.04 installed on a full disk partition. I've just bought a linux magazine, which came with a CD containing Fedora 12. I want to dual boot or fully install while retaining my music, if at all possible.
I've tried running the Fedora disc and choosing to fill empty space with Fedora, but I get an error informing me that I don't have enough space. Presumably, this is because I have a full disk partition.
I'm having a problem with sound. No audio from speakers (multi boot system, audio works on other os). Plug in logitech headset, and very low audio volume (skype is not usable). Pandora is no output. lspci gives me 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
View 6 Replies View RelatedStill a flawed KnetworkManager in the released 11.3.No user control for cabled 10/100 lan ports. Yast config for the eth0 says it can have usercontrol by networkmanager. Oh no it doesn't.It seems to cater for wi-fi users only who get a "enable wireless" tickbox and "manage connections". At least you can stop and start it.Meanwhile cable users who might have a taskbar display for lan traffic can see stuff pouring in, or out and if it's something they don't want they can't do anything about it unless they pull the plug.
View 9 Replies View RelatedI have been running Gnome 3 for a few days now and really like it, but need to tweak it to my liking, basically to an overall darker theme. Something similar to this is what I am shooting for: I have figured out how to do the shell themes (top bar, dock, etc) but I am having problems with the window manager themes (window title bars, window backgrounds, etc). Using the Gnome-Tweak_Tool, I can apply the pre-installed ones, but I am at a loss as to how I add new ones. I have tried adding themes to ~/.themes, and /usr/share/gnome-shell/themes, but I am unable to get them to show up to be usable in the tweak tool. I am comfortable using the command line and/or editing configuration files if that is the only way.
View 4 Replies View RelatedMy problem is that I need to move a moderately complex system from an old system to a new system. The old system is a core 2 duo running on an asus p5k-se (p35 chipset) M/B, Nvidia 8500 gt, 3 x sata II hard disks, 1 x sata dvd, 1 x ide hd, 4GB ram. It runs opensuse 11.1 kde 4 as a desktop system + samba server, apache server, database server + other non-opensuse software. In addition some of the opensuse software is not the default 11.1 versions as later versions were required. The nvidia driver is from the nvidia repo. There are several file systems, some under LVM.
The new system will be a core5 760, asus p7p55d-e M/b (p55 chipset), nvidia 240, 3 x sata II HD, 1 x sata dvd, 4GB ram and possibly 1 x ide HD. This M/B also includes USB 3 & sata III. I have no USB 3 devices but this may eventually change. I have no plans for sata III and believe that it may be better to attach any sata III SSD to the sata II bus.
What I would like to do is to move the hard disks from old system to the new system. What I would like to know is, if the system is left at 11.1, is the system likely to work with the new hardware. If the answer is no, if the system was upgraded to 11.3, would the transfer of the hard disks then work? In order to upgrade from 11.1 to 11.3 using the DVD i believe I should get rid of all non-default repos. I assume that I should also get rid of anything that was installed from them, e.g. the nvidia driver and any software versions installed manually outside RPM. Also is there any default 11.1 software that should be removed either before or after the upgrade to 11.3
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
I had the Wireless Broadband working. It stopped working after I closed the laptop (suspend). Also the wifi will not connect until reboot. Now the entry for the Wireless Broadband is gone, and the tab for it is greyed out as well.I would be happy to submit this as a bug and assist with the debugging process.
View 2 Replies View RelatedI'm new to openSUSE, this is the first time i try to install openSUSE version 11.4. on my IBM Thinkpad T43 (on which SUSE Linux version 8.0 has been running before without problems). I have downloaded the ISO images and successfully burned the ISO images on a blank DVD. Having placed my openSUSE DVD in the drive and rebooted my laptop I can see the boot screen.
I then select installation with arrow up/down and press enter. Choosing language and keyboard layout works fine, as well as accepting the license agreement. However, when it comes to 'System Probing' the installation stops at 'Search for system files'. The cursor shows a little turning disk but the rest of the screen is blocked.
I use release 11.2 and this one works very well. I try new release 11.3 and my system crash when I wont to start system on runlevel 5. There is Sempron 2 GHz CPU and nvidia fx550 graphics card. Keyboard PS2 does not responds but mouse on USB work well. When I start "safe" boot option system work well. What I can to do ? What I must change
View 4 Replies View Relatedwe have a server running with Suse linux many years. Meanwhile we changed server hardware about 4 times, mostly also updating to newest Suse version. We used to copy group, passwd and shadow to a backup medium, installed the new system and restored those files onto the new system and all was running fine. Now, some weeks ago we installed 11. on new hardware and after restoring those 3 files after rebooting the system hangs when starting GUI. I can boot into runlevel 3 and login with no problem, but when I boot into runlevel 5 mouse and keyboard are frozen. Also when starting GUI from runlevel 3 with startx mouse and keyboard immediately freeze. If I restore the files group, passwd and shadow as they came from fresh new installation I can reboot and login in runlevel 5 without problems.
OK, if I compare the userlist, as it is generated bei installation,there are some usernames I formerly not had in older Suse versions. I don�t know if this can make problems? I tried to edit the files, to combine the system users from 11.2 with the list of local user names from the old system but without success, again the mouse and keyboard freeze.So some questions arise:1) Why now mouse and keyboard freeze in xsystem, when there are changes in the user list (but only in runlevel 5)2) What is the correct way to save and restore users and groups from old to new system. I googled several hours but did not find a smart way. Maybee someon can point me to a link or a howto where I find the solution
I have a directory on the remote machine running redhat ES 2.1, which i want to copy to a local machine running fedora fc 10. I am using scp and want to retain permissions, links, and also ownerships of the copied directory structure. I am using scp -pr but the ownerships are all chaning to the user running scp, in my case its root. I have checked the user/groups. They are same on both the sides (lotus,bin,root). And yes I cannot use rsync as the remote m/c does not have this.
View 3 Replies View RelatedI have about 50% of my music collection in wma format from my old Windoze days. I don't want to spend the time ( it is about 1800 songs) to re rip the tunes but I want uniform format. I tried using Sound Converter 1.4.4 but I lost all the meta-data.
View 4 Replies View RelatedEvery time Ubuntu (10.04) starts, it uses a screen resolution of 1024x768. I change this successfully through Preferences to 1280x1024, but it is never remembered at the next boot. How do I ensure that it is. (I've read that an etc/X11/xorg.conf file may be used for this, but I don't have one and am unsure what I need to put into one)
View 3 Replies View RelatedI've got an older RHEL 5.5 server that we're using for our company email server. We're going to retire this server and I've created a new Debian Linux server as it's replacement. Now I'm trying to rsync all the users /home/ directories to the new server however when I tested this, I noticed a problem. In the old source server where I'm running the actual rsync command from, everyone's home directory is owned by their unique UID and a generic GID (100 = users). So when I execute this command on the old RHEL 5.5 server:
Code:
rsync -e ssh -avz /home/* root@192.168.0.101:/home
Why are all the users home directories being owned by root:root on the target server? It's not owned by root:root on RHEL 5.5 and the only thing I can think of is my rsync command is wrong. According to the man page, I can see that using the -a switch should preserve all file ownership and much more. It's not doing this on the target Debian server. If it tries to copy over /home/bob and it's owned by bob:users, if Debian didn't know or have a UID for Bob, wouldn't it just assign a UID from RHEL 5.5 to the Debian server? So like /hone/bob would be owned by 1009:users?
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
I did not find any easy way to update firefox by googling so I am asking here. But Is there an easy way to update firefox to firefox 3.6 retaining all plugins, bookmarks etc. I am using fedora 12.
View 14 Replies View RelatedI got two ubutnu servers running side by side, I need to transfer several dir's of files, incl sub dirs to the other server via ftp and retaining the file permissions and dir structure. Both servers have ftp access, I am assuming theres an ftp command I use on the destination server to connect to the source server and retrieve the files? All the files reside in the one dir and need to be copied to the same dir on the destination server.
View 1 Replies View RelatedI presently have a Karmc LiveUSB with a casper-rw partition, but am thinking of changing the LiveUSB image to Maverick, while still using the existing casper-rw partition and its data (mostly settings for Ubuntu itself, haven't installed any programmes). Using usb-creator, by the way. Are the config files for Karmic and Maverick significantly different that this will cause any major problems? [Separately, I think this will have implications for my existing Karmic install, because I'm planning to clone my Karmic /home partition to a fresh Maverick install.
View 2 Replies View RelatedHardware
HP 8510P
ATI Mobility Radeon HD 2600
Natty Narwhal with Catalyst Control Center for the ATI Radeon and FireGL graphics accelerators is installed.
Version-- 2:8.840-0ubuntu4 (fglrx-amdcccle)
Launching and configuring dual monitor support that connects and expands my Desktop/Workspace when my laptop is docked works fine. However, it does not want to retain the settings after a restart and I am forced to set it each time. Ideas?
I set up opensuse 11.4. I updated nvidia 6600 drivers from vendor. Everything is good until automatic kernel update. When I start the system, opensuse is not open with this lines.
/etc/rc.status: line 1: /bin/ash : no such file or directory
bash: ./etc/sysconfig/chron : cannot execute binary file
X_MOUSE_CURSOR : Undefined variable
[code]....
I would like to remove openSUSE (11.3) from my dual boot (/Windows) system. In the old days, the install CD used to have an option for that, but now my DVD doesn't have anything, or perhaps I overlooked?
View 7 Replies View RelatedI did a fresh install of SuSE 11.4 (WIN7 TOO) and changed my Larger HD1 to the first HD. I was installing and got this error first: the boot loader is installed on a partition that does not lie entirely below 128GB The system might not boot if BIOS supports only lba24 (result is error during install grub mbr) status loc dev/sdb6
I continued with the install and then got:
Yast2 error occured
while installing GRUB ver 0.97 (640k lower/3072k upper memory)
[minimal bash-like lineediting is supported? for the first word, TAB lists possible command completition anywhere else TAB lists possible completion of a device/filename]
grub setup --stage2=/boot/grub/stage2 --force4-lba (hd0,5) (hd0,5)
Error 25
disk read error
grub> quit
I am trying to install openSUSE 64 bit with KDE on my netbook and I am having some issues. I can't get the install started. I tried creating a live usb by using the SUSE Studio Image Writer, but I get an error saying: Exception caught during write: ystem.ComponentModel.Win32Exception: Access is deniedat ImageWriter.DriveAccess.Write(Byte[] buffer, UInt32 len)at ImageWriter.MainWindow.WriteToDisk()(This happens when I try to make the usb)I tried Googling it but I couldn't find anything so I tried creating a live usb using UNetbootin but when I boot from the usb, I get an error saying: Could not find kernel image: gfxboot.I have a 2 gb usb with FAT file format. Also I am only in High School, I want to try out different Linux distros so tell me if I did something wrong.
View 3 Replies View Relatedhow to update my system online (for example my firefox 3.0 to 3.5) but i can't figure out how this possibly works. I tried the "online update" using Yast2 but apparently (according to Yast) there is nothing at all to be patched on my system. I tried to click on the Firefox-3.5.5 rpm in the repository web-interface and open it using "install software" but the process aborts because of unresolved dependencies. Is there an easy way to update software without having to download/install every dependency manually?
View 1 Replies View Related
