Ubuntu Multimedia :: ATI Catalyst Control Not Retaining Settings / Resolve This?
May 13, 2011
Hardware
HP 8510P
ATI Mobility Radeon HD 2600
Natty Narwhal with Catalyst Control Center for the ATI Radeon and FireGL graphics accelerators is installed.
Version-- 2:8.840-0ubuntu4 (fglrx-amdcccle)
Launching and configuring dual monitor support that connects and expands my Desktop/Workspace when my laptop is docked works fine. However, it does not want to retain the settings after a restart and I am forced to set it each time. Ideas?
View 8 Replies
ADVERTISEMENT
Mar 15, 2010
Catalyst Control Center (CCC) is not saving the changes I make. I saw a couple of thread about this that had links to instructions on how to install CCC, but it still doesn't work for me.
I start CCC with 'sudo amdcccle' and the GUI appears. I can use it to make changes; however, it never saves them. After clicking OK, it instructs me to restart the system. After a reboot all the setting are back to the default.
I have installed CCC three different ways:
1) sudo aptitude install --without-recommends fglrx-amdcccle | tee fglrx-amdcccle.log
2) sudo envyng -t
3) sudo ./ati-driver-installer-10-2-x86.x86_64.run
In all cases, the fglrx driver works, and 'sudo amdcccle' brings up the GUI, but the changes are gone after a reboot.
Hmm, at the moment, when I click "Apply" and the "Do you want to keep these settings?" 15 second countdown box appears, no changes occur even temporarily.
I've tried doing a fresh install of 9.04, then upgraded to 9.10 (I have problems with the 9.10 command line installer not installing grub) among other things.
View 1 Replies
View Related
Feb 25, 2011
I run Ubuntu 10.10 on a dual monitor set up with one direct to my monitor and one to my TV through HDMI. I run the screens in clone mode with the TV showing exactly what is on my monitor(same resolutions/refresh rates). My problem is that I have problems with software that involves any sort of 3d rendering/openGL. I have ATI drivers installed and catalyst control center. I first noticed the problem just after install where I am unable to see any of the screensavers that have GL in the title. My screen just goes black even in preview mode.
I started downloading a few games. All my 2d games work, but when I installed Oolite all I got was a black screen. So I uninstalled all my ATi software and Oolite worked just fine without the ATI drivers. The screen savers still refuse to work and I am not sure where to begin to diagnose the problem. I also notice alot of tearing when watching any sort of videos on my TV screen. I haven't found any way of creating a "theater mode" where by I get fullscreen video with full V synch on one monitor whilst windowed on the other monitor.
Below are a few of my system specs:
CPU Type AMD Athlon 64, 2200 MHz (11 x 200) 3200+
Motherboard Name Unknown
Motherboard Chipset SiS 761, AMD Hammer
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (11/09/07)
Display
Video Adapter ATI Radeon HD 4300/4500 Series (512 MB)
Multimedia
Audio Adapter Analog Devices AD1888 @ SiS 7012 Audio Device
View 1 Replies
View Related
Dec 16, 2010
Ubuntu 10.10 x64. Got a second monitor and enabled Xinerama. It asked me to restart, I did. I opened ATI Catalyst Control Center after the restart and saw the control panel window open for about half a second before suddenly finding myself at the login screen.
ATI Catalyst Control Center has always seemed to work fine up until I enabled Xinerama. I tried removing the ATI driver, restarting, re-enabling it, restarting, and ATI Catalyst Control Center worked fine again. But, as soon as I enabled Xinerama it went back to logging me out whenever I tried to open the control center. I've tried from the GUI menu as well as the terminal using 'gksudo amdcccle', same result every time.
The dual monitor functionality seems fine, but I need to get back into the control center to adjust the colors. I do a lot of photo editing, and the adjustments in the control center really is a great tool to let me get the colors how I'd like.
View 5 Replies
View Related
Jun 7, 2011
I've been working on this off and on for the last couple of days and I can't seem to get this working. I'm using the latest Catalyst Control Center (11.5) and I've also got xorg.conf set up for this resolution. If I switch the driver in xorg.conf to radeon from fglrx, I can get my 1920x1080 resolution (only on GNOME;the login screen and Fluxbox have a black bar on the left that cuts off about a quarter of the screen). When using fglrx and Catalyst Control Center, I can only get a maximum resolution of 1600x1200.
Xorg.conf:
Section "ServerLayout"
Identifier "Manual Layout"
Screen "Screen-0" 0 0
[Code]...
View 7 Replies
View Related
May 10, 2010
I just installed Ubuntu amd64 10.04 on my Gateway LT3114u Netbook. The video card on this device is ATI Radeon� X1270. For some reason the automatic driver installed by Ubuntu is not working perfectly, I noticed that because: When the "Appearance Preferences" - "Visual Effects" are set to "Normal" or "Extra", some very weird lines and images apear, and I can�t read any word as the characters are messy. But if this setting is "None", the system works just fine!
Also, I tried to install the ATI driver and the "ATI Catalyst Control Center" and when I try to run it, it says the ATI driver is not working ok. Any tips on how to solve it? Please consider Im a begginer for Ubuntu.
View 4 Replies
View Related
Mar 26, 2011
Today is my sort of third day with the OS and I'm still loving it. I've been able to get the hang of quite a few things in Maverick but there is one thing that I really need help with.Back in Win7, I had the very same situation and after a week of messing around I was able to get it working; it was sheer luck, but hey, who cares?
I'm running an ASUS M4A785-M motherboard with an integrated ATI 4200 video card and using a 32" Toshiba TV with HDMI video and sound, which Ubuntu was kind enough to download the proper drivers for all on its own; Win7 didn't. Problem is, the best resolution I can use is 1920x1080, but at that point some of the text looks just too small, so I use the 1776x1000 resolution instead. Still, the grand majority of websites don't fill the browser. I have to manually zoom in each time so they can look properly. I know that after a week of tinkering in Win7 I got it working just fine without the need to zoom in on pages. I can't remember for the life of me how I did it and I had accidentally formatted the entire HDD once and all those settings got lost.Lower resolutions make it worse too. On some of them, the actual computer window won't even fill the TV unless I change certain settings, and then it still looks horrible because everything gets stretched out sideways and gets squashed and even if the PC screen doesn't fill the whole tv, it overcasts itself in the middle; as if I was using a much smaller monitor and it was overcasting.
View 1 Replies
View Related
Nov 25, 2009
I have 5.1-speaker set, confed succesfully with alsa. alsamixer -c 0 -command shows volume of all the speakers I want to set up. My problem is, when I have alsamixer open and change main volume from gnome-panel (it's called pavucontrol for me, pulseaudio?) it "resets" all speakers to max (100%). Only master volume changes like planned. For example, if I have front speakers set to 50%, center to 75%, surround to 100%, subwoofer to 40%, when changing volume from gnome's panel it only changes master volume, and puts every other speaker to max. How to prevent this? Do you have any clue? I had not any problems with this in openSUSE 11.1. Alt+F2 not working with Emerald decorator Screens go black after 10 minutes or so in openSUSE 11.2
View 5 Replies
View Related
Feb 10, 2010
I've got my ATI driver installed, now I am trying to configure it. I have a laptop plugged into a docking station with an external monitor. I would like to use the external monitor only
I run the admin ATI Catalyst control center (amdcccle) configuration GUI, set up my settings, just as stated above (i.e. laptop monitor off, external LCD on). Works great! Then I reboot... and I have to configure it all over again
I've tried editing the settings, and then running
Code:
Here are my specs:
Code:
View 4 Replies
View Related
Aug 21, 2010
I've recently installed Ubuntu 10.04 onto a PC that has a Radeon HD2600 XT graphics card. I tried to install the proprietary driver from the AMD website and from what I can tell, it seemed to work (my xorg.conf file is shown below)
Code:
The problem is that the catalyst control centre does not show up anywhere on the menu bar (such as in system>administration etc.). From advice given on a seperate post (link), I can load up the control centre from typing in a command in terminal, but is there a way to put this in the menu bar?
View 2 Replies
View Related
Nov 19, 2010
Looking at the AMD/ATI download pages, I can't tell if catalyst control center (which installs the drivers) is fully functional for Ubuntu 10.10.
Has anyone had success with this software?
I have integrated ATI Radeon 3200 HD graphics on my motherboard and can't get things working.
View 5 Replies
View Related
May 30, 2011
I am currently using Xubuntu version 11.04 and I am working with a Radeon HD 4850 graphics card. I am using the proprietary FGLRX drivers from AMD.
I have a small problem. I have two monitors, and in order to tell the computer to use the extra monitor for extra desk space, I have to get into the Administrative CCC. However, when I click on the administrative CCC, nothing happens. It's strange considering that the regular CCC works just fine.
View 1 Replies
View Related
Jan 4, 2011
I've got 10.10 up and running like a champ. Haven't done much in it, but all was well. After a little while I went in to turn the cool effects on, and it told me I needed a driver for my ATI card so I said go for it. It ended up putting Catalyst Control Center in for me. That's all fine and dandy except on the windows side I can get into an area that allows me to adjust overscan and turn it off (its a slider for under and overscan).
This version wont seem to let me do that, so now I'm stuck with either NOT a full screen, or no ability to have fun graphic effects. While your here, how can I change the data files which I think ubuntu refers to as your /home folder (documents pictures etc) to a different location? Windows7 and Ubuntu need to see the files in the same places so I don't have to have two working sets of files.
View 1 Replies
View Related
Sep 1, 2011
I just did a fresh install of natty, installed a few programs along with the ati catalyst control center.
I am having serious login issues, here is what I do:
I am at the login screen right from start-up, type in username and passward and hit enter, screen goes blank, it appears I am logging in, ubuntu plays a sound and puts me back at the login screen. I do not get an "Authentication Failed" error like I would expect. Unable to login as myself or as root.
However, I am able to login if I select the "safe mode," I am not able to login under the normal mode or the ubuntu classic modes.
I suspect that this issue has to do with the ati proprietary drivers, after playing with the settings for a while in safe mode I am now able to login to the normal natty mode without any apparent issues.
Here is what I changed in ati catalyst control center to boot into natty mode:
I disabled the Xinerama and Tear Free options.
Under the 3D settings, I selected the "override application setting" for all the 3D settings I could.
I believe I still have some display issues as I am unable to drag windows from one display to another, my mouse is able to move just fine across displays though.
I also found that enabling Xinerama prevented me from logging into the ubuntu and ubuntu classic modes, but I was able to login to the ubuntu with no effects mode.
View 3 Replies
View Related
Aug 1, 2010
I finally upgraded from my old Passive Nvidia 6600GT video card to a passive ATI 5750. Using Fedora Core 12, 2.6.32.16-141.fc12.i686, On boot the native driver worked but the card got hot as it was not de-clocking into idle mode like it does under windows 7.
So I reluctantly installed the closed source ATI driver from RPM Fusion
I also added nomodeset to the kernel start-up
Previously I was using the native standard built in Nvidia driver.
The new ATI driver seems to be running with correct entry in Xorg.conf and now it runs very cool at idle just like under windows :-
However the control center will not start...There was a problem initializing Catalyst Control Center Linux edition.
Also some commands using aticonfig return this error...
These libs are on the system in /usr/lib/catalyst
I am also getting video tearing in movies with mplayer and VLC. I have tried the options...
Which added a vsync entry in xorg.conf, but No luck...I think I need to get catalyst control center (amdcccle) running which I has a sync on refresh option radio box that may solve my video issue.
I can live with these errors but the video / movie tearing is a show stopper.
I am getting headache over this trying to find a solution to these issues. ATI and Linux still do not mix well
View 2 Replies
View Related
Oct 20, 2010
I have installed Catalyst 10.10 to Ubuntu 10.10 using the following methodology:
Code:
wget http://someplace/ati-driver-installer-8.783_RC1-x86.x86_64.run
chmod +x ati-driver-installer-8.783_RC1-x86.x86_64.run
[code]....
View 1 Replies
View Related
May 23, 2010
I have about 50% of my music collection in wma format from my old Windoze days. I don't want to spend the time ( it is about 1800 songs) to re rip the tunes but I want uniform format. I tried using Sound Converter 1.4.4 but I lost all the meta-data.
View 4 Replies
View Related
Apr 25, 2011
I need to invoke the catalyst control panel from Application->System Tools with administrator rights (so i can setup my dual monitor, which for now is in clone mode ) but there is no option to execute amdcccle as root.
I tried to call it from the terminal as amdxdg-su -c amdcccle but with no success. It asks for password and then does nothing.
So i m stuck.i cant setup the screens properly till i can access the CCC with root rights, how can i achive that?
I m using fedora 14 and catalyst ver. 11.2
View 2 Replies
View Related
Oct 28, 2009
i find it refreshing to give things a clean start when new kernels arrive... the net install is very satisfying...except when sad things happen with new kernels... let's talk about 2.6.30.9-90 2.6.30.8-64 was a solid and reliable kernel... with hardly a bug...things were working smoothly...... with the latest and greatest 30.9-90 we find that ATI's Catalyst Control ( amdcccle ) fails to run...
Code:
[HMSS013@Apple ~]$ amdcccle
Bus error.
View 11 Replies
View Related
Jan 1, 2010
If its possible to have the fan running at all times? I wanted to set my laptop fan to run even when its cool, as a preventive measure. is that possible to set it to run constantly(using ubuntu 9.04, by the way)?
View 1 Replies
View Related
Mar 10, 2010
I frequently ssh into machines to do work. In some cases, the machine is headless so there is no option to log in.Under Debian and on older versions of Ubuntu I would pull out the avahi and network-manager packages and manually configure the interfaces file to my liking and be done with it.However, I would now like to learn how to work within avahi/network manager. So, is there a doc somewhere explaining how to work with modern Ubuntu networking at the command-line level? Ie: Setting up a wireless connection, setting static/dynamic IPs, etc?
View 3 Replies
View Related
Jan 27, 2011
I was just wondering if there are any applications that would serve as a webcam manager in Ubuntu. I am running 64 bit Ubuntu 10.10 on a Dell XPS M1530. Under Windows, I was able to modify camera settings (resolution, image, special effects) from a dedicated panel any time the camera was on. I don't need a lot of flashy features, but it would be nice if I could lower the resolution so that Skype runs more smoothly.
View 4 Replies
View Related
May 11, 2011
I just finished installing Slackware64 13.37 on my Sony Vaio PCG-7153L, and I'm having issues controlling the LCD brightness of the laptop. It still has the stock Slack kernel 2.6.37.6 SMP The brightness controls worked on Fedora 12-14, as well as the Ubuntu 10.04 live disc. I checked /proc/acpi/, but there's nothing in there to control brightness. I reloaded the sony_laptop kernel module, and from dmesg I get:
Code:
sony-laptop: brightness ignored, must be controlled by ACPI video driver From the Ubuntu bug [URL] and the Red Hat bug [URL] it looks like they've already dealt with this problem. However, as I said earlier, my laptop worked fine with Fedora 12-14.I know Slackware does minimal fiddling with the kernel, so I'm thinking this might be an upstream kernel bug...
View 8 Replies
View Related
Feb 4, 2010
To start from the beginning, I realised that I have no audio, so I tried a couple of fixes that I found online. Upon rebooting, all my graphics were very choppy (moving windows, scrolling etc). The sound is working though. I dont understand how fixing sound can mess with the graphics but hey it isnt working and thats what matters.I have an installer for the ATI drivers downloaded from ati.amd.com. when I had a clean install of Ubuntu 9.10 and installed these drivers everything worked 100% without any problems. Running the installer now doesnt seem to work. The log in /usr/share/ati/fglrx-install.log reports:
Code:
Errors during DKMS module removal
Errors during DKMS module removal
[code]....
View 1 Replies
View Related
Feb 17, 2010
I just bought a 32" Panasonic LCD (1080p) and have decided to use that as my main monitor. Unfortunately, when I hooked it up to my computer, I had under-scan with both Windows 7 x64 and Ubuntu Karmic x64 (using a Radeon HD 4870 1GB). In Windows, there was a simple slider in the Catalyst Control Center to fix the under-scan issue. Unfortunately, the same option wasn't available with the Linux counterpart. I searched online for some answers, but all the ones I found seemed outdated, or gave me errors.Using the Aticonfig help command, I figured out how to fix the under-scan in Linux.
View 9 Replies
View Related
Nov 5, 2010
I have already downloaded and installed ati's catalyst for my ati mobility radeon 4570 (at least i think so, since there is the ATI catalyst control center in the system-> preferences menu). The problem is that i want to upgrade its version from 10.9 to 10.10. and since i want to firstly uninstall the previous version,I get this:
Code:
alexandros@alexandros-laptop:/usr/share/ati$ sh ./fglrx-uninstall.sh
sh: Can't open ./fglrx-uninstall.sh
The uninstall.sh doesn't exist.
View 6 Replies
View Related
Mar 2, 2010
So after playing around working out how to install the latest ATI drivers as super user and finally getting it done, I restarted my computer to find out that the CCC wont open.If I run the basic version nothing happens, if I run advanced it asks for password then does nothing.
View 2 Replies
View Related
Jun 12, 2010
Maybe saying Ubuntu is getting worse is unfair. I'm not a big user I have to say. I use it more out of curiosity than anything else. I first used 8 and it was brilliant. I told all my mates about it. Everything work great. I had all desktop effects. I could use a KDE session. Then I upgraded to 9 and lost KDE ability but still had all desktop effects available. Upgraded to 10 a few weeks ago and now no desktop effects. Non of the above is a problem but I feel like, for me, it's going backwards.
I use an old AMD 2600 machine with a Radeon 9600. I used to be able to use ATI Catalyst but that didn't work after the upgrade to 10 and I can't seem to find a solution. Ubuntu is still brilliant but I don't like things being taken away from me.
View 7 Replies
View Related
Jan 28, 2011
First problem is that there does not seem to be any Catalyst Control Center available for this driver. Is there one anywhere for Linux for this driver? The graphics card appears to be constantly at 99% usage at all times when simply sitting at the desktop. Is there a way to bring this down to virtually no usage like it should be at?
The display area on my monitor does not extend to the edges. In Windows, I can simply scale it to 0% to overscan in order to completely fill the screen inside the Catalyst Control Center; in Linux, I have been unable to do so with a monitor. Is there any way to scale the display area to completely fill my screen?
View 9 Replies
View Related
Nov 29, 2010
something odd I've noticed with 11.3 on my laptop--if I adjust my resolution through the Monitor applet in the Control Center or if I make changes to my Touchpad settings through the Control Center, the changes are lost when I log into my laptop. Do you think I botched an installation?
I've tried to determine what actual files are affected via the two applets with the thought that maybe I don't have the necessary permissions on them or that I can throw a bandaid on it with a start-up task to overwrite them. Alas, I've got nuthin'
View 1 Replies
View Related
