OpenSUSE Install :: Can't Boot From Live Cd
Aug 12, 2011
I've just downloaded and burned openSUSE-LXDE-11.4 and i tried to boot on the live cd but it's impossible. After loading kernel, 2 or 3 minutes later, this message is displayed and the pc reboots:
waiting for /usb device scan to complete
waiting for CD/DVD device(s) to appear
waiting for USB device scan to complete
failed to detect CD/DVD or USB drive!
reboot exception: error consoles at Alt-F3/F4
reboot exception: reboot in 120sec
View 7 Replies
ADVERTISEMENT
Apr 5, 2010
Recently I have strange problem in my notebook HP2230s. I cannot boot from KDE 4.4 Live cd. I also try LXDE openSUSE 11.2 live cd, same result. I verify the MD5 and all the iso download is ok. I try the same cd to another laptop, Dell ATG, it works flawlessly.
So I thought there is a problem with my laptop BIOS. I download the new BIOS from HP and install it but the problem persist.
I have another live cd image that I made using susestudio, no problem with this one. I can boot it as live cd in my notebook.
View 2 Replies
View Related
Jul 30, 2010
I'm trying to boot the KDE 11.3 Live CD and it hangs during the boot. With splash=off I see
Code:
/etc/initscript: line 77: /etc/sysconfig/ulimit: Input/Output error then a bunch of different Id numbers, for example...
Code: INIT Id 4 respawning too fast: disabled for 5 minutes and finally a few lines starting with a number (for example [100.676357]) and ending with
Code: [100.676357] lost page write due to I/O error on loop 0 and then it just loops between the respawn and write errors, as far as I can tell.
My system has a 1.8Hz processor, 1G of RAM and an integrated nVidea GeForce 6150 card, and I'm dual booting sidux and XP. I've checksummed the ISO file. I tried first with a 1G USB drive (Transferring the ISO via dd as per the openSUSE instructions) and then with a CD (burned at the lowest speed). I also tried the CD on a Gateway laptop running just XP and got the same errors. Boot parameters I tried were noapic, pci=nomsi, acpi=off, with no difference.
View 9 Replies
View Related
Dec 19, 2009
Trying to booting an Acer TM 8371 Notebook using USB flash media and the openSUSE-11.2-KDE4-LiveCD-x86_64 image.
After the BIOS greeting messages nothing more happens. System seems to hang. When removing the USB memory stick the system continues on trying to boot from the hdd.
When using the openSUSE-11.2-NET-x86_64 image, system detects the USB stick properly and retrieves it's ip address. Since there is no PXE system set up, installation of course stops thereafter.
What's the difference between both images? I recognized that when using the openSUSE-11.2-KDE4-LiveCD-x86_64 image a partition with type linux is created on the USB stick. When using the openSUSE-11.2-NET-x86_64 image fdisk says:
"Disk /dev/sda doesn't contain a valid partition table".
View 2 Replies
View Related
Feb 8, 2010
I've followed the instructions at Live USB stick - openSUSE for creating a bootable USB stick. I have attempted this with both a 32 bit and 64 bit image. Unfortunately my system will not boot up the stick - it just loads my hard disk as normal.
Background info
1. I have checked the iso images against the checksum and they are ok;
2. I have used the same images to create bootable CDs which work fine;
3. My machine IS capable of booting a USB stick - by copying syslinux onto the stick, the machine does see the stick
4. The order of boot in BIOS is stick first. Again, I have proven this works ok using a utility called USB Boot Tester.
I am unsure what to try next. I recall reading on this forum there was a problem booting from USB stick if the computer also had a CD drive. That was in an early version of LiveCD. Could the problem still be extant? I can't find the actual thread unfortunately otherwise I would link to it.
View 8 Replies
View Related
Aug 25, 2010
I installed lxde from a live cd and can't boot into anything. At first, when I rebooted, the computer went to grub>, so I used grub commands to find the grub menu lst. It was in (hd0,5). So I made that the root and grub said it was successful. I rebooted, now I get error 25. Was I supposed to enable one of the boot options in the setup? The setup showed two boot options, MBR and root (I think), both disabled. I just clicked continue. Did I mess up the install setup?
View 9 Replies
View Related
Mar 16, 2011
I am using an HCL k38 pdc laptop and I am unable to boot KDE live cd of opensuse 11.4. The system boots to a graphical screen where a progress bar is shown. the progress bar proceeds to about 90% and then my system hangs. ALl I can see on my screen is that graphical image with suse logo and progress bar. Though my mouse works and I can move it all around the desktop but if I try pressing any key (CAPS/NUM LOCK/SCROLL LOCK) i dont see any LED notification for that. this concludes that the system is hanged.
Key board has no issue as I can use it in Windows.
I tried to boot the lice cd in text mode and it worked very fine from there I installed the system on to my HDD in dual boot mode with windows XP. But after installation when I boot opensuse from HDD it stucks at the same position.
I think this issue is with Nvidea graphics card as when the system boots I see an error message that says that the RAM has an address conflict with VGA ROM.
How can I use opensuse. I have even tried ubuntu 10.10 but it also hangs while booting or after booting. So far I have been able to manage only Sabayon Linux working on this machine however the ubuntu 9.10 was working on this system and it also started behaving similarly after I upgraded it to ubuntu 10.04.
View 1 Replies
View Related
Jul 26, 2011
A few weeks ago I installed Fedora Linux 64-bit on my HP dv4-1428ca laptop which was running Windows 7. At that time I created a Live USB using the fedora-live usb tool and it booted fine. A couple days ago I decided to try out openSUSE, so I downloaded the 64-bit live-cd image and tried to create a live usb using the SUSEStudio ImageWrite provided in the documentation. The tool kept giving me an error message, so I decided to try unetbootin instead. However, when I tried to boot the live usb on my HP laptop, it presented me with the message.
"SYSLINUX 4.04 EDD 2011-04-18 COPYRIGHT (C) 1994-2011 H. PETER ANVIN ET AL" with a blinking cursor and nothing else. I've tried a variety of alternative programs for creating live USB's (pendrivelinux, linux live usb creator, unebootin), and verified the checksum of the iso file for openSUSE 11.4 64-bit, and still was not able to get past the "SYSLINUX..." message on my HP laptop. However, the live USB does boot on the other computers in my house. Interestingly, if I create a live USB using the tool provided by Fedora, it will boot fine. However the Fedora Live USB tool cannot be used for other distros.
Specs:
AMD Turion X2 Dual Core
4GB Ram
ATI Radeon 3200 Graphics
320 GB Hard Drive
View 3 Replies
View Related
Mar 21, 2010
I successfully booted OpenSuse 11.2 from DVD. But I could not configure my wireless internet connection. YAST said it couldn't configure it because something else was controlling that (Network Manager? something like that)How can I configure this. Related issue. When booting from DVD is there a way to save configuration settings so I don't have to start from scratch the next time I boot from DVD?
View 7 Replies
View Related
Jul 1, 2010
I have been trying to install openSUSE on a dell Latitude XT all day, and every time I tried to live boot, I got a blank screen. I finally decided to do a text install and I got it installed, but now I get the same result from booting off of the splash screen.
I can boot into text mode fine (still) but for whatever reason, it bombs as soon as I tell it to load the GUI. I have a 1.2 GHz Core 2 Duo, 3GB RAM, and an ATI mobility chip (2000 series, maybe?) I had the same problem with Ubuntu, and since I like openSUSE just as well, I figured I'd try it because I at least could do a text install from my liveCD.
View 2 Replies
View Related
Dec 14, 2010
I just built a 11.3 live usb stick using kde amd64 image. I can go through a full boot up, but when X start I get a blank srceen(Samsung SyncMaster PX2370) on my desktop. I really do not know where to start.
View 4 Replies
View Related
Jan 13, 2011
Naturally, hiding the graphical grub screen on a regular installation is easy, by adding either "timeout 0" or "hiddenmenu" to menu.lst. But on a live boot, there seems to be no menu.lst - at least no accessible one.
Although, in some kiwi image types, you can specify boottimeout="n" in the image description's type element, it does not have the intended effect. Here is an example. The following type element's boottimeout attribute will invoke the first grub menu item instantly. Changing the value to zero, not only does not hide the grub screen, but seems to restore the default 10 second time out.
<type image="iso" primary="true" boot="isoboot/suse-11.3" boottimeout="1" hybrid="true" flags="clic"/>
Is there any way to hide the graphical grub screen in a kiwi live boot?
View 1 Replies
View Related
Apr 7, 2011
Im new to linux. Im trying to install 11.4 on my desktop. When i try to run the live CD (GNOME) .. after loading the kernel, the screen with just a progressbar appears and the screen crashes, as in some parts of it goes black.. Although, i can install it perfectly, when the OS boots the same kinda screen appears and crashes My system config- intel i7-870 4 core 4GB RAM nVidia GeForce 9800GT 1GB i need to get rid of windows fast.
View 9 Replies
View Related
Jul 19, 2011
As per the thread title, tried both 32 and 64-bit isos, also re-downloaded the isos in case of a problem with them
Fails to enter runlevel 5 (and start kdm), I've tried the usual nomodeset, setting no_kms_in_initrd isn't much help as mkinitrd fails after setting it
Here's the gist of the errormsgs:
Code:
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Failed to load module "fglrx" (module does not exist" (0)
(II) [KMS] drm report modesetting isn't supported
(EE) RADEON(0): Chipset: "AMD Radeon HD 6800 Series" (ChipID = 0x6738) requires kms Some things I've tried:
Blacklisting fglrx doesn't work with vi as it tells me 50-blacklist.conf is read-only even when I use the ! override read-only switch
Tried specifying both the radeon and radeonhd and even vesa drivers in /etc/X11/xorg.conf.d/50-device.conf when trying off a usb pen drive created with imagewriter
As mentioned earlier. tried nomodeset and no_kms_in_initrd to yes
It's a pain as I have tumbleweed on the machine and prior to putting the radeon card in it I would use a live usb drive to backup the system prior to updating, when I had an nividia card in the machine live usb and live cd would both boot no problem so it pretty much has to be something about the way it's handling the radeon card (like trying to load the non-existent fglrx driver regardless of what I do to try stopping that maybe?)
Don't know what else to try though and if I can't get it booting off a live opensuse I can see myself putting another os on it somewhere just for backing up the system before any updates
View 9 Replies
View Related
Dec 14, 2009
how to PXE boot a SuSE Live CD/DVD (i.e. a Knoppix/DLS type boot)?
View 4 Replies
View Related
Sep 14, 2010
I installed a copy of Fedora 13 onto my HDD yesterday and everything went fine until, for some reason, it stopped working. (Got stuck at the white bar while booting up). Well, I wasn't sure what the problem was so I decided to run the live CD again (which *is* a good CD, unless it somehow managed to destroy itself since yesterday) and I get "Could not mount root filesystem," sleeping forever. Hm.I haven't changed any of the hardware, and all the connections seem to still be good, so, I dunno... Any ideas on what could be the problem? Thanks in advance for any input.:UPDATE:Now my computer simply displays a list of repeating errors, each one like:Quote:
ata1.00: failed commnad: read DMA
(...)
ata1.00: [ABRT]
View 1 Replies
View Related
Sep 16, 2010
I have a SONY PCG-R505TE laptop with an external CD/DVD, it connects via what I think is a PCMCIA card, the drive came with the laptop and functions fine. I currently have Windows XP running on this laptop, but it's very slow.I downloaded openSUSE-11.3-GNOME-LiveCD-i686.iso and sucessfully burned it to a CD.I have the laptop bios set to boot from CD, and it appears to be doing that no problem. When it boots I first see the welcome screen, then the openSUSE Installer, whether I select the Live (GNOME) option, or the Installation.. it loads the kernel, and then loads the KIWI boot systemit is on the third event, waiting for CD/DVD dvices to appear... that something seems to fail... I then see Failed to detect CD/DVD or USB drivethen a rebootexception and it reboots in 120 seconds.
View 2 Replies
View Related
Jul 18, 2010
I am trying to create an usb install from an gnome-live cd. All I have done is not working:
dd
fedora liveusb-creator
fusbi
linuxlive usb creator
unetbootin
pendrive
All I can get are errors saying cang find kernel or error like that. I have used linux and windows environment. The iso I am using is fine, I am sure because I have instaled it on two pcs. Iso gnome-live >> usb (bootable to install)
View 1 Replies
View Related
Jan 12, 2009
i have a hp dv6707us with windows vista and i'm trying to install fedora 10 x86_64 from a live cd, when i try to use the live cd it shows a screen saying that it will boot after 10 seconds, then appears a black screen with a loading bar with fedora 10 word next to it when the bar becomes completely white along with the word fedora 10 it doesnt happens anything and any indication of what could be wrong then i type enter and it reads the live cd for a while then a black screen with a blinking cursor appears and yet nothing happens i wait until i get bored and cancel the all the process.
View 1 Replies
View Related
Feb 20, 2010
The harddrive of an old laptop of mine recently died. Until I can replace it, I would like to use the xubuntu live-cd. However I would also like to be able to install some additional packages and change some settings, so it would be great if I could make it persistent. I know that it's possible to install to an usb-pendrive, but the problem is that the laptop isn't able to boot from usb-devices.
Is it possible to install xubuntu to usb, but boot the system wiith the live-cd? Or is there another way to use an usb-pendrive to keep some settings/packages?
View 2 Replies
View Related
Apr 1, 2010
I wanted to keep kon-boot and ubuntu live on USB drives instead of CDs for the ease of carrying around. I wonder if its at all possible to put both tools on same USB drive instead of keeping them on two separate ones?
View 3 Replies
View Related
Jun 25, 2010
I use Ubuntu at work on multiple machines. I have instaled one PC ok (although had a few issues with the errno5 install error. Took out some RAM, installed, put RAM back, works). Now trying to reinstall on my main PC and having some very weird issues.When I try to boot off the CD it boots, says there was a problem and takes me into the desktop session, but that session wont actually load up properly. I think its something to do with gnome messing up the activity applet etc. Sometimes I get a blank grey box in the middle that looks like a half loaded error, othertimes it actually loads and tells me 'The panel encountered a problem while loading "OAFIID:GNOME_IndicatorApplet".'
Other times it asks me if I want to delete the applet or not, but clicking doesnt seem to do anything. mouse pointer works as normal but clicking anything doesntseem to do anything, or it seems to catch up 10 minutes laterBreifly managed to get into another TTY but then that locked up too after I tried 'killall gnome-panel'.I dont think the CD is the issue as the md5 checksum is correct, and my colleagues pc is on 10.04 using this CD. Please help, I dont want to be stuck on 9.10 forever
View 4 Replies
View Related
Dec 14, 2009
I have a non-broadcast network (ad-hoc?) that I attempt to connect to via openSUSE 11.2 running off live USB. It does nothing. It never connects and when I view it with available networks it just shows the name and "insecure" (even though it's WPA2Personal) and no percentage.How do I get wireless to work?
View 4 Replies
View Related
Dec 14, 2009
I downloaded the live cd iso and installed it on usb using this command (while it was unmounted):ddif=open SUSE-11.2-KDE4-LiveCD-i686.iso of=/dev/sdc bs=4M...I then restarted and it loads into a main openSUSE screen, I choose the "OpenSUSE 11.2" and it starts loading. Then it shows the progress abr under the gecko guy and it starts to load, that moves to a few diff. places on the screen and then it goes black. Any ideas?
View 7 Replies
View Related
Jul 11, 2011
I have done a big big mistake (I could beat myself up for that) with my netbook and now I am sitting here, not getting openSUSE installed on it.
I wanted to try another netbook linux and installed (more by accident than intentionally) Easy Peasy Linux. This system is not bad, but cannot work with the wireless adapter in my netbook. However, I then wanted to install openSUSE 11.4 again, which ran fine on the netbook. But the install always gets stuck in different stages and I donīt know why.
Sometimes a failure message comes up: "filesystem is read only, rebooting in 120 seconds", but I am not really sure if this is for the harddrive or the usb stick. In other occasions, the bootprocess until install gets stuck at "starting KDM". Nothing happens then... thats it.
I already have reformatted the usb stick and copied the openSUSE Live CD via Imagewriter on it again... no success.
So now I am really confused, because I donīt know if there is something wrong with the harddrive? Or is it the stick itself? How can I find this out?
If it is the harddrive, how can I at least refomat it? Remember: no CD or DVD drive, just USB stick...
How can I find out if the image on the stick is ok? I already tested the install media and it said: "checksum ok"
View 9 Replies
View Related
Feb 28, 2009
I was able to install Fedora 10 from the Live KDE CD, however I can't boot it.
I placed it on /dev/hda4 of an IDE disk, while on /dev/hda1 I have a RedHat 9 Linux, /home is on /dev/hda2 and the swap is on /dev/hda3. I'm not sure if RedHat 9 and Fedora 10 can coexist on the same HD.
There's an option in the Live KDE CD boot install, which allows one to select:
boot from hard disk:
Do you know what to type in in order to direct Fedora to boot from /dev/hda4 (who may be /dev/sda4 as seen by Fedora)?
P.S. For the time being, I want to forget about Grub or LILO and see if I can boot it this way first. I have LILO working, it boots Windows from a separate disk and RedHat 9 from /dev/hda1.
View 3 Replies
View Related
Aug 7, 2011
I'm using Fedora 15 and i want to install Ubunto 11.04 using live usb and then the two linux systems to be on my computer.note:first fedora 15 is to be installed
View 1 Replies
View Related
Aug 17, 2010
I have made several live Cd's and img for my flash drive and tried to even preview Ubuntu before install, but nothing seems to be working. it makes it to the screen that says Ubuntu with the dots and the dots "cycle" then afew seconds later, weather cd or flash drive, everything just stops and my computer freezes. Tried nomodeset and everything i could find between here and google to no avail.
cant get past that load screen. Ive been lurking on the forum for days and finally got fed up enough to post this because im fresh and have no clue what im doing when it comes to this. all i know is i want something better than windows(lol) and Ubuntu seems like its right up my alley...user, my "skills" if you will, are better than most, but Linux.its like trying to reed Greek for me.Also, computer specs...Toshiba A505-S6025 4gb Memory Nvidia GeForce 310M (from what i read i will have trouble with this) Realtek RTL8191SE wlan (also will have problems with this)
EDIT: just ran live cd with virtual box and it started the demo of Ubuntu with no problem with no options(like nomodeset) checked off... apparently i think im doing something wrong when it comes to booting the other way...
View 2 Replies
View Related
Mar 6, 2011
I downloaded the latest OpenSUSE LIVE CD and burnt it with Nero at 4x speed and there was no errors.
I booted the CD up and I hit Run Live CD, I come to errors
ID "1" Respawning too fast: Disabled for 5 minutes
ID "2" Respawning too fast: Disabled for 5 minutes
ID "3" Respawning too fast: Disabled for 5 minutes
ID "4" Respawning too fast: Disabled for 5 minutes
ID "5" Respawning too fast: Disabled for 5 minutes
ID "6" Respawning too fast: Disabled for 5 minutes
I am not sure what to do as I want to use OpenSUSE,
View 2 Replies
View Related
May 11, 2011
I have made many attempts at getting the live CD to boot from a usb key with no success. I have read the various tutorials, including a kiwi method. There seems to be something missing.
What (and where) is the executable file that boots the system? I used the Imagewriter to create my key. It has a syslinux.conf file but I see no executable called syslinux. I see nothing in the boot folder that is executable either.
The tutorial that has the imagewriter method has little detail. The kiwi tutorial has exquisite detail but it applies to kiwi and I can't figure out how to "translate" it. There must be something very simple that I am missing. I tried this on 2 different machines and it failed 2 different ways.
View 2 Replies
View Related
