OpenSUSE Install :: Can't Boot Live Kde Cd Or Usb On Machine With Radeon 6870

Jul 19, 2011

As per the thread title, tried both 32 and 64-bit isos, also re-downloaded the isos in case of a problem with them

Fails to enter runlevel 5 (and start kdm), I've tried the usual nomodeset, setting no_kms_in_initrd isn't much help as mkinitrd fails after setting it

Here's the gist of the errormsgs:

Code:
(==) Using config directory: "/etc/X11/xorg.conf.d"
(EE) Failed to load module "fglrx" (module does not exist" (0)
(II) [KMS] drm report modesetting isn't supported
(EE) RADEON(0): Chipset: "AMD Radeon HD 6800 Series" (ChipID = 0x6738) requires kms Some things I've tried:

Blacklisting fglrx doesn't work with vi as it tells me 50-blacklist.conf is read-only even when I use the ! override read-only switch

Tried specifying both the radeon and radeonhd and even vesa drivers in /etc/X11/xorg.conf.d/50-device.conf when trying off a usb pen drive created with imagewriter

As mentioned earlier. tried nomodeset and no_kms_in_initrd to yes

It's a pain as I have tumbleweed on the machine and prior to putting the radeon card in it I would use a live usb drive to backup the system prior to updating, when I had an nividia card in the machine live usb and live cd would both boot no problem so it pretty much has to be something about the way it's handling the radeon card (like trying to load the non-existent fglrx driver regardless of what I do to try stopping that maybe?)

Don't know what else to try though and if I can't get it booting off a live opensuse I can see myself putting another os on it somewhere just for backing up the system before any updates

View 9 Replies


ADVERTISEMENT

Hardware :: Aticonfig / Fglrx Error On Debian With Card Radeon HD 6870

Jun 26, 2011

i tried setting up fglrx driver for my card using the steps outlined here: wiki.debian.org/ATIProprietary
but when I get to the step where it tells me to use aticonfig i get this error: Code: aticonfig: No supported adapters detected I tried to make xorg.conf myself by doing what it says and making this the xorg.conf file:

[Code]...

but X won't start if I do that (delete xorg.conf and it goes back to it's fglrx-less state) However, I was successfully able to install the drivers on my Ubuntu install (different partition on the same machine) but not my Debian install.

View 5 Replies View Related

OpenSUSE Install :: ATI Radeon HD 3650 AGP Boot?

Feb 20, 2011

I have installed OpenSuse 11.3 . System doesn't boot in NORMAL mode, system boots only in Fail-safe mode. In NORMAL mode i have kernel panic (may be i am wrong, but Caps Lock + Scroll Lock are blinking synchronously during NORMAL boot). ATI Radeon HD 3650 AGP figured on thread Subject because i am sure that the problem is in this video card. 2 weeks ago i have installed ATI Proprietary driver for this card and system successfully boot in NORMAL mode without any kernel panic. You may ask me, "What the problem, install this driver again and have fun!". The problem is that when I install this driver and boot in NORMAL mode video sub system works very slowly. For example one mouse scroll in Internet browser takes 2 seconds to redraw the window. It is not only browser window problem. It refers to all windows. I even can see the wave from up to down on the screen when any window redraws. Very poor performance of 2D video. So , installation of this driver is not the solution.

In the Fail-safe mode 2D video performance is not so cool as at Windows XP but is much more better than in NORMAL boot with proprietary driver installed. Now I have clean installation of system without any drivers installed over distributive. now system configuration:

1. Motherboard: Intel 845D(has on board AC'97 sound, but this sound is disabled in BIOS currently)

2. CPU:Intel Celeron 1.7 GHz.

3. Main memory: 1,5 GB DDR 266MHz.

4. Video card: PowerColor ATI Radeon HD 3650 AGP (512 MB, 64 bit).

5. Sound card: CMI8738.

[Code]...

View 9 Replies View Related

OpenSUSE Install :: ATI Radeon 3650 Can Not Boot (into LiveCD)

May 14, 2011

I can not porpperly boot into live CD. I get the option menu in beginning and when i select the liveCD option it starts loading the kernel and then screen gets garbled. full of very small dots. Its liek the graphics card is not recognised propperly. I've read about similar issue here: ATI Radeon HD 3650 AGP boot problem

but as i see the user's specific problem in taht thread was caused by having an AGP card and on an older version. however my card is PCI. it should boot normally. i haven't tried nomodeset parameter mentioned in that thread, but the card shouldn't need it anyway.

View 5 Replies View Related

OpenSUSE Install :: Cannot Boot From KDE 4.4 Live Cd

Apr 5, 2010

Recently I have strange problem in my notebook HP2230s. I cannot boot from KDE 4.4 Live cd. I also try LXDE openSUSE 11.2 live cd, same result. I verify the MD5 and all the iso download is ok. I try the same cd to another laptop, Dell ATG, it works flawlessly.

So I thought there is a problem with my laptop BIOS. I download the new BIOS from HP and install it but the problem persist.

I have another live cd image that I made using susestudio, no problem with this one. I can boot it as live cd in my notebook.

View 2 Replies View Related

OpenSUSE Install :: KDE Live CD Won't Boot

Jul 30, 2010

I'm trying to boot the KDE 11.3 Live CD and it hangs during the boot. With splash=off I see

Code:
/etc/initscript: line 77: /etc/sysconfig/ulimit: Input/Output error then a bunch of different Id numbers, for example...

Code: INIT Id 4 respawning too fast: disabled for 5 minutes and finally a few lines starting with a number (for example [100.676357]) and ending with

Code: [100.676357] lost page write due to I/O error on loop 0 and then it just loops between the respawn and write errors, as far as I can tell.

My system has a 1.8Hz processor, 1G of RAM and an integrated nVidea GeForce 6150 card, and I'm dual booting sidux and XP. I've checksummed the ISO file. I tried first with a 1G USB drive (Transferring the ISO via dd as per the openSUSE instructions) and then with a CD (burned at the lowest speed). I also tried the CD on a Gateway laptop running just XP and got the same errors. Boot parameters I tried were noapic, pci=nomsi, acpi=off, with no difference.

View 9 Replies View Related

OpenSUSE Install :: Can't Boot From Live Cd

Aug 12, 2011

I've just downloaded and burned openSUSE-LXDE-11.4 and i tried to boot on the live cd but it's impossible. After loading kernel, 2 or 3 minutes later, this message is displayed and the pc reboots:

waiting for /usb device scan to complete
waiting for CD/DVD device(s) to appear
waiting for USB device scan to complete
failed to detect CD/DVD or USB drive!
reboot exception: error consoles at Alt-F3/F4
reboot exception: reboot in 120sec

View 7 Replies View Related

OpenSUSE Install :: Live CD On USB Doesn't Boot / What To Do?

Dec 19, 2009

Trying to booting an Acer TM 8371 Notebook using USB flash media and the openSUSE-11.2-KDE4-LiveCD-x86_64 image.

After the BIOS greeting messages nothing more happens. System seems to hang. When removing the USB memory stick the system continues on trying to boot from the hdd.

When using the openSUSE-11.2-NET-x86_64 image, system detects the USB stick properly and retrieves it's ip address. Since there is no PXE system set up, installation of course stops thereafter.

What's the difference between both images? I recognized that when using the openSUSE-11.2-KDE4-LiveCD-x86_64 image a partition with type linux is created on the USB stick. When using the openSUSE-11.2-NET-x86_64 image fdisk says:

"Disk /dev/sda doesn't contain a valid partition table".

View 2 Replies View Related

OpenSUSE Install :: Live USB Stick Does Not Boot / Fix It?

Feb 8, 2010

I've followed the instructions at Live USB stick - openSUSE for creating a bootable USB stick. I have attempted this with both a 32 bit and 64 bit image. Unfortunately my system will not boot up the stick - it just loads my hard disk as normal.

Background info
1. I have checked the iso images against the checksum and they are ok;
2. I have used the same images to create bootable CDs which work fine;
3. My machine IS capable of booting a USB stick - by copying syslinux onto the stick, the machine does see the stick
4. The order of boot in BIOS is stick first. Again, I have proven this works ok using a utility called USB Boot Tester.

I am unsure what to try next. I recall reading on this forum there was a problem booting from USB stick if the computer also had a CD drive. That was in an early version of LiveCD. Could the problem still be extant? I can't find the actual thread unfortunately otherwise I would link to it.

View 8 Replies View Related

OpenSUSE Install :: LXDE Live Cd And Can't Boot

Aug 25, 2010

I installed lxde from a live cd and can't boot into anything. At first, when I rebooted, the computer went to grub>, so I used grub commands to find the grub menu lst. It was in (hd0,5). So I made that the root and grub said it was successful. I rebooted, now I get error 25. Was I supposed to enable one of the boot options in the setup? The setup showed two boot options, MBR and root (I think), both disabled. I just clicked continue. Did I mess up the install setup?

View 9 Replies View Related

OpenSUSE Install :: 11.1 Machine Won't Boot To RAID1 Md0?

Mar 2, 2010

I cleverly built a machine with two drives mirrored, boot partition on the mirror. It crashed some time when I was not present, and was apparently writing to disk at the time, for since, it will not boot. I get error messages to the effect that there is no boot partition. At this point I am not particularly concerned to try to rebuild this array, though I have read a hell of a lot on the boards about trying that (and am daunted - everyone assumes you can boot the machine with the bad array). Instead, I am wondering is it possible to build a simple machine on a third disk, then "look" at the disks in the former (?) array, and/or potentially rebuild it?

View 1 Replies View Related

OpenSUSE Install :: Live CD BOOT/INSTALL With HCL K38 Laptop

Mar 16, 2011

I am using an HCL k38 pdc laptop and I am unable to boot KDE live cd of opensuse 11.4. The system boots to a graphical screen where a progress bar is shown. the progress bar proceeds to about 90% and then my system hangs. ALl I can see on my screen is that graphical image with suse logo and progress bar. Though my mouse works and I can move it all around the desktop but if I try pressing any key (CAPS/NUM LOCK/SCROLL LOCK) i dont see any LED notification for that. this concludes that the system is hanged.

Key board has no issue as I can use it in Windows.

I tried to boot the lice cd in text mode and it worked very fine from there I installed the system on to my HDD in dual boot mode with windows XP. But after installation when I boot opensuse from HDD it stucks at the same position.

I think this issue is with Nvidea graphics card as when the system boots I see an error message that says that the RAM has an address conflict with VGA ROM.

How can I use opensuse. I have even tried ubuntu 10.10 but it also hangs while booting or after booting. So far I have been able to manage only Sabayon Linux working on this machine however the ubuntu 9.10 was working on this system and it also started behaving similarly after I upgraded it to ubuntu 10.04.

View 1 Replies View Related

OpenSUSE Install :: Unable To Boot From Live USB On HP Laptop

Jul 26, 2011

A few weeks ago I installed Fedora Linux 64-bit on my HP dv4-1428ca laptop which was running Windows 7. At that time I created a Live USB using the fedora-live usb tool and it booted fine. A couple days ago I decided to try out openSUSE, so I downloaded the 64-bit live-cd image and tried to create a live usb using the SUSEStudio ImageWrite provided in the documentation. The tool kept giving me an error message, so I decided to try unetbootin instead. However, when I tried to boot the live usb on my HP laptop, it presented me with the message.

"SYSLINUX 4.04 EDD 2011-04-18 COPYRIGHT (C) 1994-2011 H. PETER ANVIN ET AL" with a blinking cursor and nothing else. I've tried a variety of alternative programs for creating live USB's (pendrivelinux, linux live usb creator, unebootin), and verified the checksum of the iso file for openSUSE 11.4 64-bit, and still was not able to get past the "SYSLINUX..." message on my HP laptop. However, the live USB does boot on the other computers in my house. Interestingly, if I create a live USB using the tool provided by Fedora, it will boot fine. However the Fedora Live USB tool cannot be used for other distros.

Specs:
AMD Turion X2 Dual Core
4GB Ram
ATI Radeon 3200 Graphics
320 GB Hard Drive

View 3 Replies View Related

Ubuntu :: Possible To Use Live Cd To Boot On Windows Machine

Feb 19, 2010

is it possible to use a live cd to boot on a windows machine then scan with clam av if so how would you load AV, would it be possible to have AV on the same cd or would a seperate usb work? & not install it but use via cd/usb

View 3 Replies View Related

Ubuntu :: Live CD Of Version 10.04 - Does Not Boot On The Machine

Jan 1, 2011

I've made a Live CD of version 10.04 on a machine running 10.04 (amd64). The disk works fine on another machine but does not boot on the machine that created it. The CD/DVD is new and works for other things so I don't think it is this. The Live CD gets to the ISOLINUX screen but instead of "Loading" the screen goes blank and the system shuts down. I've tried everything I can think of (remember the disk works fine on another machine).

View 2 Replies View Related

OpenSUSE Install :: Boot Disk, Live CD, How To Connect To Internet?

Mar 21, 2010

I successfully booted OpenSuse 11.2 from DVD. But I could not configure my wireless internet connection. YAST said it couldn't configure it because something else was controlling that (Network Manager? something like that)How can I configure this. Related issue. When booting from DVD is there a way to save configuration settings so I don't have to start from scratch the next time I boot from DVD?

View 7 Replies View Related

OpenSUSE Install :: GUI Will Not Load - Blank Screen On Live Boot

Jul 1, 2010

I have been trying to install openSUSE on a dell Latitude XT all day, and every time I tried to live boot, I got a blank screen. I finally decided to do a text install and I got it installed, but now I get the same result from booting off of the splash screen.

I can boot into text mode fine (still) but for whatever reason, it bombs as soon as I tell it to load the GUI. I have a 1.2 GHz Core 2 Duo, 3GB RAM, and an ATI mobility chip (2000 series, maybe?) I had the same problem with Ubuntu, and since I like openSUSE just as well, I figured I'd try it because I at least could do a text install from my liveCD.

View 2 Replies View Related

OpenSUSE Install :: 11.3 Live Usb Stick Blank After Boot-up / Resolve This?

Dec 14, 2010

I just built a 11.3 live usb stick using kde amd64 image. I can go through a full boot up, but when X start I get a blank srceen(Samsung SyncMaster PX2370) on my desktop. I really do not know where to start.

View 4 Replies View Related

OpenSUSE Install :: Hiding Grub In A Kiwi Live Boot

Jan 13, 2011

Naturally, hiding the graphical grub screen on a regular installation is easy, by adding either "timeout 0" or "hiddenmenu" to menu.lst. But on a live boot, there seems to be no menu.lst - at least no accessible one.

Although, in some kiwi image types, you can specify boottimeout="n" in the image description's type element, it does not have the intended effect. Here is an example. The following type element's boottimeout attribute will invoke the first grub menu item instantly. Changing the value to zero, not only does not hide the grub screen, but seems to restore the default 10 second time out.

<type image="iso" primary="true" boot="isoboot/suse-11.3" boottimeout="1" hybrid="true" flags="clic"/>

Is there any way to hide the graphical grub screen in a kiwi live boot?

View 1 Replies View Related

OpenSUSE Install :: Unable To Boot Live 11.4 On NVidia 9800GT?

Apr 7, 2011

Im new to linux. Im trying to install 11.4 on my desktop. When i try to run the live CD (GNOME) .. after loading the kernel, the screen with just a progressbar appears and the screen crashes, as in some parts of it goes black.. Although, i can install it perfectly, when the OS boots the same kinda screen appears and crashes My system config- intel i7-870 4 core 4GB RAM nVidia GeForce 9800GT 1GB i need to get rid of windows fast.

View 9 Replies View Related

OpenSUSE Install :: Suse 11.2 Don't Boot On Server Machine Dell R710

May 26, 2010

for any reason after installation system hangs up and nothing happens, i�m newbie about linux, maybe the problem is the RAID 1 configuration of the disks. The machine is a R710 Server:

2 x Xeon E5520
4 x 2 GB Memory
4 X 750 GB SATA 7200 3.5" disk
PERC 6/i Raid controller

View 9 Replies View Related

Hardware :: ATI Radeon HD 3650 AGP On OpenSuse 11.3 Boot?

Feb 19, 2011

I have installed OpenSuse 11.3 . System doesn't boot in NORMAL mode, system boots only in Fail-safe mode. In NORMAL mode i have kernel panic (may be i am wrong, but Caps Lock + Scroll Lock are blinking synchronously during NORMAL boot). ATI Radeon HD 3650 AGP figured on thread Subject because i am sure that the problem is in this video card.

[Code]...

View 3 Replies View Related

OpenSUSE Install :: PXE Booting A Live CD / DVD "Knoppix / DLS Type Boot"?

Dec 14, 2009

how to PXE boot a SuSE Live CD/DVD (i.e. a Knoppix/DLS type boot)?

View 4 Replies View Related

OpenSUSE Install :: X.org Dual-head Under 11.3 With Radeon?

Jul 16, 2010

I've just performed a fresh installation of openSUSE 11.3. System specs include GA-MA790X-DS4, PhenomII X4 940 AM2+, Sapphire RadeonHD 3670, two monitors. What I'm trying to accomplish is to set up my KDE desktop to (as it did under 11.2) use a multi-desktop multi-output non-cloned setup, so that I can use my two monitors side by side and maximize windows in either one respectively, etc.

So here I am with my newly installed system. Obviously I can't use fglrx, as it doesn't yet support the 2.6.34 kernel, so amdcccle is right out. SaX2, I notice, is gone. I have tried using KDE's built-in configuration tools, but the dual-head setup doesn't persist between logins. Strangely, windows that were open on the second monitor do vanish off-screen, but the monitors return to their overlapped positions so it's useless. Monitor 2 doesn't even retain its resolution setting. As one does, I decided I'd manually edit the X configuration file. SHOCK HORROR! No xorg.conf So what I'm driving at is this: How oh how do I configure my X.org to remember that it has two, quite different, monitors under openSUSE 11.3 ? Sorry if this post is hard to follow, I got very little sleep while trying to sort out the myriad problems I caused myself in upgrading.

View 9 Replies View Related

OpenSUSE Hardware :: Can't Install ATI Radeon HD 2600 Driver On 11.3 X86

Jul 27, 2010

recently I have downloaded opensuse 11.3.tried to install latest version of graphic driver.but after uncompressing it says:

which: no XFree86 in (/home/muhammad/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/jvm/jre/bin)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.34-12-desktop:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.fvzKbN

I have installed kernel sources,xorg x11 headers and gcc.

View 9 Replies View Related

OpenSUSE Install :: Suse Radeon HD 5850 Drivers?

Mar 7, 2010

I have been having lots of trouble getting my system up and running after I installed a Radeon HD 5850 on my suse machine. I did as they told by uninstalling the previous drivers and installing the new ones as stated in ATI Catalyst™ 10.2 Linux Installer Note.

2)sh ./ati-driver-installer-10-2-x86.x86_64.run
7) /usr/bin/aticonfig --initial

This was all done from a terminal... And I did this for Suse distributions 11.1 and 11.2. Both times my mouse cursor disappeared, but this could easily be fixed by adding the option "SWCursor" "on" option under the Device section.

This was only part of the solution as I still have incredible lag on my windows e.g. when I scroll down a web page it takes incredibaly long to render and you can see it rendering the page in steps from the bottom up. As well as when I drag a window across my desktop it lags behind and you can se it reforming at the new position.

Finally I tried different releases of the proprietary driver. I tried 10.1 and this did not give me the mouse cursor issue, but the window lag still prevails. These are my xorg.conf and xorg.0.log files for my current setup. Opensuse 11.1 and proprietary driver version 10.1. I have an Radeon HD 5850 card.[URL]..

I should add that I am on a private network, and only have the oss, non-oss and packman repositories available. (Is it possible to add the AMD driver repository? Because I have trid and the firewall refuses connection.)

View 6 Replies View Related

OpenSUSE Hardware :: Cannot Install ATI Radeon 4670 Display Driver

Mar 13, 2010

I tried to install the driver using the easy and hard way, but unfortunately I couldn't install it. When the file manager opens up through terminal after I type in the command using super user mode, I select the downloaded file and it opens it up in kwrite.

View 9 Replies View Related

OpenSUSE Hardware :: Install Ati Drivers For Ati Radeon X1200 Chipset?

Nov 8, 2010

how to install ati drivers for the ati radeon x1200 chipset? i searched everywhere but i could not find a link to a repository for this chipset

View 7 Replies View Related

Ubuntu Multimedia :: ATI 6870 Proprietary Driver Not Working?

Jan 9, 2011

I installed the proprietary driver in System->Administration->Additional Drivers, but after installing when I am required to restart, I restart my computer and encounter a black screen. I tried using Ctrl-Alt-'-" to change the resolution but that didn't work because the computer is completely frozen, so I have to reboot in recovery and uninstall the driver...

This also makes it so I am unable to go to the maximum resolution my desktop can obtain. (1920 x 1200, but I'm limited to 1600 x 1200)

View 1 Replies View Related

OpenSUSE Hardware :: Install The Correct Driver For RV710 Radeon HD4350 Grahics Card?

Mar 15, 2010

Am trying to install the correct driver for my RV710 Radeon HD4350 grahics card.which version out of these two I should install: * x11-video-fglrxG02 (for HD2000 series and later) * x11-video-fglrxG01 (for Radeon 9500 - X1900)

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved